ITT FA0108RSWCBE Miniature rota-slide rotary switch Datasheet

C&K F Series
Miniature ROTA-SLIDE Rotary Switches
®
Features/Benefits
• Multi-pole and multi-position
• Panel and PCB mounting
• Positive detent
• Value added capability
Typical Applications
• Small appliances
• Testing fixtures
• Safety equipment
Models Available
Specifications
Materials
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-44 for
additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 45º or 90º -one contact models; two contact models,
4 pos. max. Models with common terminal -90º, 4 pos. max.
OPERATING & STORAGE TEMPERATURE: -30ºC to 65ºC
HOUSING & BUSHING: 6/6 Nylon (UL 94V-2).
ACTUATOR: 6/6 nylon (UL 94V-2).
CONTACTS: Q contact material: Copper, silver plated. See page
L-44 for additional contact materials.
TERMINALS: Q contact material: Copper, silver plated. See page
L-44 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.
MOUNTING NUT: Brass, nickel plated.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q or B contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Custome Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L-42 thru L-44. For additional options not shown in catalog, consult Customer Service Center.
Rotary
Switch Function
FA05 SP, 90° Index, 3 pos.
F103 SP, 45° Index, 3 pos.
F203 DP, 45° Index, 3 pos.
Actuator
FA01 SPDT, 90° Index
15 Screwdriver slot without bushing
FC03 SP, W/Common 90° Index, 3 pos.
08 .585" high with .156" flat
Mounting Style
RN PC
RS 5/16-32 threaded bushing
Terminations
02 PC Thru-hole
WC Wire lead
Contact Material
Q Silver
B Gold
Seal
NONE No seal
E Epoxy seal
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
L–41
L
www.ittcannon.com
C&K F Series
Miniature ROTA-SLIDE® Rotary Switches
SWITCH FUNCTION
45º INDEXING SCHEMATICS
45º INDEXING
NO.
POLES
MODEL
NO.
SWITCH
FUNCTION
SP
F103
3 Position
8-1-2-3*
DP
F203
3 Position
All Terminals
TERMINALS
F1XX MODELS
Break-before-make contacts. Terminal numbers
are molded on bottom of housing. Actuators are
shown in position 1.
F2XX MODELS
NOTE: *Switches with ‘02’ PC terminations have
additional terminal no. 5 as switch support only.
This terminal is not connected electrically inside switch.
F1XX, F2XX models: No common terminal is present.
Switching function is provided by movable contacts
shorting adjacent pairs of stationary contacts.
90º INDEXING
NO.
POLES
MODEL
NO.
90º INDEXING SCHEMATICS
SWITCH
FUNCTION
TERMINALS
FA01
SPDT
8-1-3
FA05
3 Position
8-1-3-5
FC03
3 Position
C-1,C-2,C-3
SP
SP WITH
COMMON
FA01 MODEL
FA05 MODEL
Rotary
L
C= Common Terminal
FCXX MODEL
Break-before-make contacts. Terminal numbers
are molded on bottom of housing. Actuators are
shown in position 1.
FAXX models: No common terminal is present.
Switching function is provided by movable contacts
shorting adjacent pairs of stationary contacts.
NOTE: *Switches with ‘02’ PC terminations have
additional terminal no. 5 as switch support only.
This terminal is not connected electrically inside switch.
8
7
6
5
4
2
3
FCXX models: Common terminal is present.
Part number show: FC0315RN02Q
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
L–42
www.ittcannon.com
C&K F Series
Miniature ROTA-SLIDE Rotary Switches
®
ACTUATOR
15
08
SCREWDRIVER SLOT WITHOUT BUSHING
Shown with ‘RN’ mounting style; not
available with ‘RS’ mounting style
or FCXX models.
.585" HIGH WITH .156" FLA
Must be ordered with ‘RS’ mounting style.
MOUNTING STYLE
RN
PC
RS
5/16-32 THREADED BUSHING
PANEL MOUNTING
5/16 IN. BUSHING
PC mount, no bushing, position numbers
molded standard. Shown with ‘15’ actuator;
not available with ‘08’ actuator or FCXX models.
Panel mount, with 5/16 in.–32 threaded bushing.
Mounting nut (P/N 175020201) included. Must
be ordered with ‘08’ actuator option.
TERMINATIONS
02
PC THRU-HOLE
WC
L
WIRE LEAD
Rotary
PC MOUNTING
F1XX, F2XX & FAXX Models
02
Black wire standard, other colors and
lengths available, consult Customer
Service Center. UL style 1015.
PC THRU-HOLE
FCXX Models
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
L–43
www.ittcannon.com
C&K F Series
Miniature ROTA-SLIDE® Rotary Switches
CONTACT MATERIAL
RoHS
COMPATIBLE*
CONTACT AND
TERMINAL MATERIAL
OPTION
CODE
RoHS
COMPLIANT*
Q
YES
YES
SILVER 2
B
YES
YES
GOLD
1
RATING
POWER
4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA).
LOW LEVEL/DRY CIRCUIT
0.4 VA MAX. @ 20 V AC or DC MAX.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
1
2
NOTE: Any models supplied with Q or B contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).
All models
with all options when ordered with ‘Q’ contact material.
SEAL
NONE
E
NO SEAL
EPOXY SEAL
Not available on FCXX models.
Rotary
L
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
L–44
www.ittcannon.com
Similar pages