EFRP-P280A 800W CRPS 2U U Redundant Power Supply Features: 80PLUS® Platinum Level High Efficiency Standard N+1 CRPS Redundant Design 800W with +12V and +5VSB Output PMBus 1.2 Support 0~50℃ Working Temperature Cold Redundancy Support General Specification Support universal AC or DC 240Vac input (Dual mode) Efficiency : 94% @230V Input (Power Module) Digital load sharing control (Optional) Input Range:: 100 to 240 VAC, +/-10% +/ Support +5VSB Short Circuit Protection Over Current Protection Over Voltage Protection Over Temperature Protection Support hot swap Inrush current limiter Brown in / Brown out EMI/RFI: CE, FCC class A Safety: UL, TUV, CCC, CB, CE, FCC Input and Output Characteristics Input Output Voltage Frequency Current Load 100~240 47~63Hz 10~4A VAC Note: +3.3V +5V +12V -12V 12V Max.Load 25A 25A 66A 0.5A 3A Min.Load 0A 0A 0.5A 0A 0A 1. +3.3V and +5V combined output shall not exceed 150W. 1 2. Total output shall not exceed 800W. Ripple and Noise Output +3.3V +5V +12V -12V 5Vsb Load Regulation ±5% 5% ± 5% ± 5% ± 5% ± 5% Line Regulation ± 1% ± 1% ± 1% ± 1% ± 1% Ripple & Noise 60mV mV 60mV 120mV 120mV 60mV 0mV -5V +5VSB Mechanical Outline Dimension: 75.6 x 83.8 x 250(mm) Outline Drawing ©ETASIS Electronic Corporation. All rights reserved. ETASIS Electronics Corporation reserves the right to make changes to their products, specification, or to discontinue any product and its service at anytime without notice. The information and specification from ETASIS is believed to be accurate and reliable. However, ETASIS assumes no responsibility for any business loss due to specification changes. ETASIS products are not designed to be used in system deemed to be critical, or in any system wherein failure or malfunction could result in injury or death.