Microchip DSPIC33FJ06GS202TE/SO High-performance, 16-bit digital signal controller Datasheet

dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04
Data Sheet
High-Performance,
16-bit Digital Signal Controllers
© 2009 Microchip Technology Inc.
Preliminary
DS70318D
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, Accuron,
dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro,
PICSTART, rfPIC, SmartShunt and UNI/O are registered
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
FilterLab, Linear Active Thermistor, MXDEV, MXLAB,
SEEVAL, SmartSensor and The Embedded Control Solutions
Company are registered trademarks of Microchip Technology
Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, In-Circuit Serial
Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB
Certified logo, MPLIB, MPLINK, mTouch, nanoWatt XLP,
PICkit, PICDEM, PICDEM.net, PICtail, PIC32 logo, PowerCal,
PowerInfo, PowerMate, PowerTool, REAL ICE, rfLAB, Select
Mode, Total Endurance, TSHARC, WiperLock and ZENA are
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2009, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS70318D-page ii
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04
High-Performance, 16-Bit Digital Signal Controllers
Operating Range:
Peripheral Features:
• Up to 40 MIPS Operation (at 3.0-3.6V):
- Industrial temperature range (-40°C to +85°C)
- Extended temperature range (-40°C to +125°C)
• Timer/Counters, up to Three 16-Bit Timers:
- Can pair up to make one 32-bit timer
• Input Capture (up to two channels):
- Capture on up, down or both edges
- 16-bit capture input functions
- 4-deep FIFO on each capture
• Output Compare (up to two channels):
- Single or Dual 16-Bit Compare mode
- 16-Bit Glitchless PWM mode
• 4-Wire SPI:
- Framing supports I/O interface to simple
codecs
- 1-deep FIFO Buffer.
- Supports 8-bit and 16-bit data
- Supports all serial clock formats and
sampling modes
• I2C™:
- Supports Full Multi-Master Slave mode
- 7-bit and 10-bit addressing
- Bus collision detection and arbitration
- Integrated signal conditioning
- Slave address masking
• UART:
- Interrupt on address bit detect
- Interrupt on UART error
- Wake-up on Start bit from Sleep mode
- 4-character TX and RX FIFO buffers
- LIN bus support
- IrDA® encoding and decoding in hardware
- High-Speed Baud mode
- Hardware Flow Control with CTS and RTS
High-Performance DSC CPU:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Modified Harvard Architecture
C Compiler Optimized Instruction Set
16-Bit Wide Data Path
24-Bit Wide Instructions
Linear Program Memory Addressing up to
4M Instruction Words
Linear Data Memory Addressing up to 64 Kbytes
83 Base Instructions: Mostly 1 Word/1 Cycle
Two 40-Bit Accumulators with Rounding and
Saturation Options
Flexible and Powerful Addressing modes:
- Indirect
- Modulo
- Bit-Reversed
Software Stack
16 x 16 Fractional/Integer Multiply Operations
32/16 and 16/16 Divide Operations
Single-Cycle Multiply and Accumulate:
- Accumulator write back for DSP operations
- Dual data fetch
Up to ±16-Bit Shifts for up to 40-Bit Data
Digital I/O:
•
•
•
•
•
•
•
Peripheral Pin Select Functionality
Up to 35 Programmable Digital I/O Pins
Wake-up/Interrupt-on-Change for up to 30 Pins
Output Pins can Drive Voltage from 3.0V to 3.6V
Up to 5V Output with Open-Drain Configuration
5V Tolerant Digital Input Pins (except RB5)
16 mA Source/Sink on All PWM pins
On-Chip Flash and SRAM:
• Flash Program Memory (up to 16 Kbytes)
• Data SRAM (up to 2 Kbytes)
• Boot and General Security for Program Flash
© 2009 Microchip Technology Inc.
Interrupt Controller:
•
•
•
•
•
5-Cycle Latency
Up to 35 Available Interrupt Sources
Up to Three External Interrupts
Seven Programmable Priority Levels
Four Processor Exceptions
Preliminary
DS70318D-page 1
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
High-Speed PWM Module Features:
High-Speed 10-Bit ADC
• Up to Four PWM Generators with Four to
Eight Outputs
• Individual Time Base and Duty Cycle for each of
the Eight PWM Outputs
• Dead Time for Rising and Falling Edges
• Duty Cycle Resolution of 1.04 ns
• Dead-Time Resolution of 1.04 ns
• Phase Shift Resolution of 1.04 ns
• Frequency Resolution of 1.04 ns
• PWM modes Supported:
- Standard Edge-Aligned
- True Independent Output
- Complementary
- Center-Aligned
- Push-Pull
- Multi-Phase
- Variable Phase
- Fixed Off-Time
- Current Reset
- Current-Limit
• Independent Fault/Current-Limit Inputs for
8 PWM Outputs
• Output Override Control
• Special Event Trigger
• PWM Capture Feature
• Prescaler for Input Clock
• Dual Trigger from PWM to ADC
• PWMxL, PWMxH Output Pin Swapping
• PWM4H, PWM4L Pins Remappable
• On-the-Fly PWM Frequency, Duty Cycle and
Phase Shift Changes
• Disabling of Individual PWM Generators
• Leading-Edge Blanking (LEB) Functionality
• 10-Bit Resolution
• Up to 12 Input Channels Grouped into
Six Conversion Pairs
• Two Internal Reference Monitoring Inputs
Grouped into a Pair
• Successive Approximation Register (SAR)
Converters for Parallel Conversions of Analog Pairs:
- 4 Msps for devices with two SARs
- 2 Msps for devices with one SAR
• Dedicated Result Buffer for each Analog Channel
• Independent Trigger Source Section for each
Analog Input Conversion Pair
High-Speed Analog Comparator
• Up to Four Analog Comparators:
- 20 ns response time
- 10-bit DAC for each analog comparator
- DACOUT pin to provide DAC output
- Programmable output polarity
- Selectable input source
- ADC sample and convert capability
• PWM Module Interface:
- PWM duty cycle control
- PWM period control
- PWM Fault detect
DS70318D-page 2
Power Management:
• On-Chip 2.5V Voltage Regulator
• Switch between Clock Sources in Real Time
• Idle, Sleep, and Doze modes with Fast Wake-up
CMOS Flash Technology:
•
•
•
•
•
Low-Power, High-Speed Flash Technology
Fully Static Design
3.3V (±10%) Operating Voltage
Industrial and Extended Temperature
Low-Power Consumption
System Management:
• Flexible Clock Options:
- External, crystal, resonator, internal RC
- Phase-Locked Loop (PLL) with 120 MHz VCO
- Primary Crystal Oscillator (OSC) in the range
of 3 MHz to 40 MHz
- Internal Low-Power RC (LPRC) oscillator at a
frequency of 32 kHz
- Internal Fast RC (FRC) oscillator at a
frequency of 7.37 MHz
• Power-on Reset (POR)
• Brown-out Reset (BOR)
• Power-up Timer (PWRT)
• Oscillator Start-up Timer (OST)
• Watchdog Timer with its RC Oscillator
• Fail-Safe Clock Monitor (FSCM)
• Reset by Multiple Sources
• In-Circuit Serial Programming™ (ICSP™)
• Reference Oscillator Output
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Application Examples
•
•
•
•
•
•
•
•
•
AC-to-DC Converters
Automotive HID
Battery Chargers
DC-to-DC Converters
Digital Lighting
Induction Cooking
LED Ballast
Renewable Power/Pure Sine Wave Inverters
Uninterruptible Power Supply (UPS)
Packaging:
• 18-Pin SOIC
• 28-Pin SPDIP/SOIC/QFN-S
• 44-Pin TQFP/QFN
Note:
See the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04
Controller
Families table for the exact peripheral
features per device.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 3
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 PRODUCT
FAMILIES
The device names, pin counts, memory sizes and
peripheral availability of each device are listed below.
The following pages show their pinout diagrams.
Device
Pins
Program Flash Memory (Kbytes)
RAM (Bytes)
Remappable Pins
16-bit Timer
Input Capture
Output Compare
UART
SPI
PWM(2)
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 Controller Families
dsPIC33FJ06GS101
18
6
256
8
2
0
1
1
1
2x2(1)
0
3
0
1
1
3
6
13
SOIC
dsPIC33FJ06GS102
28
6
256
16
2
0
1
1
1
2x2
0
3
0
1
1
3
6
21
SPDIP
SOIC
QFN-S
dsPIC33FJ06GS202
28
6
1K
16
2
1
1
1
1
2x2
2
3
1
1
1
3
6
21
SPDIP
SOIC
QFN-S
dsPIC33FJ16GS402
28
16
2K
16
3
2
2
1
1
3x2
0
3
0
1
1
4
8
21
SPDIP
SOIC
QFN-S
dsPIC33FJ16GS404
44
16
2K
30
3
2
2
1
1
3x2
0
3
0
1
1
4
8
35
QFN
TQFP
dsPIC33FJ16GS502
28
16
2K
16
3
2
2
1
1
4x2(1)
4
3
1
1
2
6
8
21
SPDIP
SOIC
QFN-S
dsPIC33FJ16GS504
44
16
2K
30
3
2
2
1
1
4x2(1)
4
3
1
1
2
6
12
35
QFN
TQFP
Note 1:
2:
3:
Packages
I/O Pins
Analog-to-Digital Inputs
Sample and Hold (S&H) Circuit
SARs
I2C™
DAC Output
External Interrupts(3)
ADC
Analog Comparator
Remappable Peripherals
The PWM4H:PWM4L pins are remappable.
The PWM Fault pins and PWM synchronization pins are remappable.
Only two out of three interrupts are remappable.
DS70318D-page 4
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Pin Diagrams
= Pins are up to 5V tolerant
18-Pin SOIC
1
18
2
17
VSS
AN1/RA1
3
16
PWM1L/RA3
15
PWM1H/RA4
14
VCAP/VDDCORE
13
VSS
PGEC1/SDA1/RP7(1)/CN7/RB7
AN2/RA2
4
AN3/RP0(1)/CN0/RB0
5
OSC1/CLKI/AN6/RP1(1)/CN1/RB1
6
OSC2/CLKO/AN7/RP2(1)/CN2/RB2
TCK/PGED2/INT0/RP3(1)/CN3/RB3
7
8
(1)/CN4/RB4
9
TMS/PGEC2/RP4
dsPIC33FJ06GS101
MCLR
AN0/RA0
12
11
10
dsPIC33FJ06GS102
1
2
3
4
5
6
7
8
9
10
11
12
13
14
28
27
26
25
24
23
22
21
20
19
18
17
16
15
1:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
dsPIC33FJ06GS202
Note
TDO/RP5(1)/CN5/RB5
AVDD
AVSS
PWM1L/RA3
PWM1H/RA4
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
RP12(1)/CN12/RB12
RP11(1)/CN11/RB11
VCAP/VDDCORE
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
PGED1/TDI/SCL/RP6(1)/CN6/RB6
TDO/RP5(1)/CN5/RB5
PGEC3/RP15(1)/CN15/RB15
= Pins are up to 5V tolerant
28-Pin SPDIP, SOIC
MCLR
AN0/CMP1A/RA0
AN1/CMP1B/RA1
AN2/CMP1C/CMP2A/RA2
AN3/CMP1D/CMP2B/RP0(1)/CN0/RB0
AN4/CMP2C/RP9(1)/CN9/RB9
AN5/CMP2D/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/RP1(1)/CN1/RB1
(1)
OSC2/CLKO/RP2 /CN2/RB2
PGED2/DACOUT/INT0/RP3(1)/CN3/RB3
PGEC2/EXTREF/RP4(1)/CN4/RB4
VDD
PGED3/RP8(1)/CN8/RB8
PGED1/TDI/SCL1/RP6(1)/CN6/RB6
= Pins are up to 5V tolerant
28-Pin SOIC, SPDIP
MCLR
AN0/RA0
AN1/RA1
AN2/RA2
(1)/CN0/RB0
AN3/RP0
AN4/RP9(1)/CN9/RB9
AN5/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/RP1(1)/CN1/RB1
(1)
OSC2/CLKO/RP2 /CN2/RB2
TCK/PGED2/INT0/RP3(1)/CN3/RB3
TMS/PGEC2/RP4(1)/CN4/RB4
VDD
PGED3/RP8(1)/CN8/RB8
VDD
28
27
26
25
24
23
22
21
20
19
18
17
16
15
AVDD
AVSS
PWM1L/RA3
PWM1H/RA4
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
TCK/RP12(1)/CN12/RB12
TMS/RP11(1)/CN11/RB11
VCAP/VDDCORE
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
PGED1/TDI/SCL/RP6(1)/CN6/RB6
TDO/RP5(1)/CN5/RB5
PGEC3/RP15(1)/CN15/RB15
The RPn pins can be used by any remappable peripheral. See the “dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 Controller Families” table for the list of available peripherals
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 5
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Pin Diagrams (Continued)
28-Pin SPDIP, SOIC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
dsPIC33FJ16GS402
MCLR
AN0/RA0
AN1/RA1
AN2/RA2
AN3/RP0(1)/CN0/RB0
AN4/RP9(1)/CN9/RB9
AN5/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/AN6/RP1(1)/CN1/RB1
(1)
OSC2/CLKO/AN7/RP2 /CN2/RB2
PGED2/INT0/RP3(1)/CN3/RB3
PGEC2/RP4(1)/CN4/RB4
VDD
PGED3/RP8(1)/CN8/RB8
= Pins are up to 5V tolerant
28
27
26
25
24
23
22
21
20
19
18
17
16
15
= Pins are up to 5V tolerant
28-Pin SPDIP, SOIC
Note
1:
DS70318D-page 6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
dsPIC33FJ16GS502
MCLR
AN0/CMP1A/RA0
AN1/CMP1B/RA1
AN2/CMP1C/CMP2A/RA2
AN3/CMP1D/CMP2B/RP0(1)/CN0/RB0
AN4/CMP2C/CMP3A/RP9(1)/CN9/RB9
AN5/CMP2D/CMP3B/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/AN6/CMP3C/CMP4A/RP1(1)/CN1/RB1
OSC2/CLKO/AN7/CMP3D/CMP4B/RP2(1)/CN2/RB2
PGED2/DACOUT/INT0/RP3(1)/CN3/RB3
PGEC2/EXTREF/RP4(1)/CN4/RB4
VDD
CN8/RB8/PGED3/RP8(1)/CN8/RB8
AVDD
AVSS
PWM1L/RA3
PWM1H/RA4
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
TCK/PWM3L/RP12(1)/CN12/RB12
TMS/PWM3H/RP11(1)/CN11/RB11
VCAP/VDDCORE
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
PGED1/TDI/SCL/RP6(1)/CN6/RB6
TDO/RP5(1)/CN5/RB5
PGEC3/RP15/CN15/RB15
28
27
26
25
24
23
22
21
20
19
18
17
16
15
AVDD
AVSS
PWM1L/RA3
PWM1H/RA4
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
TCK/PWM3L/RP12(1)/CN12/RB12
TMS/PWM3H/RP11(1)/CN11/RB11
VCAP/VDDCORE
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
PGED1/TDI/SCL/RP6(1)/CN6/RB6
TDO/RP5(1)/CN6/RB5
PGEC3/RP15(1)/CN15/RB15
The RPn pins can be used by any remappable peripheral. See the “dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 Controller Families” table for the list of available peripherals
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
28-Pin QFN-S(2)
28 27 26 25 24 23 22
1
21
2
20
3
19
4 dsPIC33FJ06GS102 18
5
17
6
16
7
15
8 9 10 11 12 13 14
= Pins are up to 5V tolerant
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
TCK/RP12(1)/CN12/RB12
TMS/RP11(1)/CN11/RB11
VCAP/VDDCORE
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
28-Pin QFN-S(2)
28 27 26 25 24 23 22
1
21
2
20
3
19
4 dsPIC33FJ06GS202 18
5
17
6
16
7
15
8 9 10 11 12 13 14
= Pins are up to 5V tolerant
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
TCK/RP12(1)/CN12/RB12
TMS/RP11(1)/CN11/RB11
VCAP/VDDCORE
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
PGED2/DACOUT/INT0/RP3(1)/CN3/RB3
PGEC2/EXTREF/RP4(1)/CN4/RB4
VDD
PGED3/RP8(1)/CN8/RB8
PGEC3/RP15(1)/CN15/RB15
TDO/RP5(1)/CN5/RB5
PGED1/TDI/SCL/RP6(1)/CN6/RB6
AN2/CMP1C/CMP2A/RA2
AN3/CMP1D/CMP2B/RP0(1)/CN0/RB0
AN4/CMP2C/RP9(1)/CN9/RB9
AN5/CMP2D/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/RP1(1)/CN1/RB1
(1)
OSC2/CLKO/RP2 /CN2/RB2
AN1/CMP1B/RA1
AN0/CMP1A/RA0
MCLR
AVDD
AVSS
PWM1L/RA3
PWM1H/RA4
PGED2/INT0/RP3(1)/CN3/RB3
PGEC2/RP4(1)/CN4/RB4
VDD
PGED3/RP8(1)/CN8/RB8
(1)/CN15/RB15
PGEC3/RP15
TDO/RP5(1)/CN5/RB5
PGED1/TDI/SCL/RP6(1)/CN6/RB6
AN2/RA2
AN3/RP0(1)/CN0/RB0
AN4/RP9(1)/CN9/RB9
AN5/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/RP1(1)/CN1/RB1
(1)
OSC2/CLKO/RP2 /CN2/RB2
AN1/RA1
AN0/RA0
MCLR
AVDD
AVSS
PWM1L/RA3
PWM1H/RA4
Pin Diagrams (Continued)
Note
1:
The RPn pins can be used by any remappable peripheral. See the “dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 Controller Families” table for the list of available peripherals.
2:
The metal plane at the bottom of the device is not connected to any pins and is recommended to be connected to
VSS externally.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 7
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
28-Pin QFN-S(2)
28 27 26 25 24 23 22
1
21
2
20
3
19
4 dsPIC33FJ16GS402 18
5
17
6
16
7
15
8 9 10 11 12 13 14
= Pins are up to 5V tolerant
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
TCK/PWM3L/RP12(1)/CN12/RB12
TMS/PWM3H/RP11(1)/CN11/RB11
VCAP/VDDCORE
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
28-Pin QFN-S(2)
28 27 26 25 24 23 22
1
21
2
20
3
19
4 dsPIC33FJ16GS502 18
5
17
6
16
7
15
8 9 10 11 12 13 14
= Pins are up to 5V tolerant
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
TCK/PWM3L/RP12(1)/CN12/RB12
TMS/PWM3H/RP11(1)/CN11/RB11
VCAP/VDDCORE
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
PGED2/DACOUT/INT0/RP3(1)/CN3/RB3
PGEC2/EXTREF/RP4(1)/CN4/RB4
VDD
PGED3/RP8(1)/CN8/RB8
PGEC3/RP15(1)/CN15/RB15
TDO/RP5(1)/CN5/RB5
PGED1/TDI/SCL/RP6(1)/CN6/RB6
AN2/CMP1C/CMP2A/RA2
AN3/CMP1D/CMP2B/RP0(1)/CN0/RB0
AN4/CMP2C/CMP3A/RP9(1)/CN9/RB9
AN5/CMP2D/CMP3B/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/AN6/CMP3C/CMP4A/RP1(1)/CN1/RB1
OSC2/CLKO/AN7/CMP3D/CMP4B/RP2(1)/CN2/RB2
AN1/CMP1B/RA1
AN0/CMP1A/RA0
MCLR
AVDD
AVSS
PWM1L/RA3
PWM1H/RA4
PGED2/INT0/RP3(1)/CN3/RB3
PGEC2/RP4(1)/CN4/RB4
VDD
PGED3/RP8(1)/CN8/RB8
PGEC3/RP15(1)/CN15/RB15
TDO/RP5(1)/CN5/RB5
PGED1/TDI/SCL/RP6(1)/CN6/RB6
AN2/RA2
AN3/RP0(1)/CN0/RB0
AN4/RP9(1)/CN9/RB9
AN5/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/AN6/RP1(1)/CN1/RB1
(1)
OSC2/CLKO/AN7/RP2 /CN2/RB2
AN1/RA1
AN0/RA0
MCLR
AVDD
AVSS
PWM1L/RA3
PWM1H/RA4
Pin Diagrams (Continued)
Note
DS70318D-page 8
1:
The RPn pins can be used by any remappable peripheral. See the “dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 Controller Families” table for the list of available peripherals.
2:
The metal plane at the bottom of the device is not connected to any pins and is recommended to be connected to
VSS externally.
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Pin Diagrams (Continued)
44-Pin QFN(2)
PGED2/INT0/RP3(1)/CN3/RB3
RP18(1)/CN18/RC2
PGEC2/RP4(1)/CN4/RB4
RP23(1)/CN23/RC7
PGED3/RP8(1)/CN8/RB8
VDD
VSS
RP24(1)/CN24/RC8
PGEC3/RP15(1)/CN15/RB15
PGED1/TDI/SCL/RP6(1)/CN6/RB6
TDO/RP5(1)/CN5/RB5
= Pins are up to 5V tolerant
44 43 42 41 40 39 38 37 36 35 34
PGEC1/SDA/RP7(1)/CN7/RB7
RP20(1)/CN20/RC4
RP21(1)/CN21/RC5
RP22(1)/CN22/RC6
RP19(1)/CN19/RC3
VSS
VCAP/VDDCORE
TMS/PWM3H/RP11(1)/CN11/RB11
TCK/PWM3L/RP12(1)/CN12/RB12
PWM2H/RP13(1)/CN13/RB13
PWM2L/RP14(1)/CN14/RB14
1
2
3
33
32
31
OSC2/CLKO/AN7/RP2(1)/CN2/RB2
OSC1/CLKI/AN6/RP1(1)/CN1/RB1
4
5
6
7
8
9
10
11
30
29
28
27
26
25
24
23
VSS
VDD
RP26(1)/CN26/RC10
RP25(1)/CN25/RC9
dsPIC33FJ16GS404
AN8/CMP4C/RP17(1)/CN17/RC1
AN5/RP10(1)/CN10/RB10
AN4/RP9(1)/CN9/RB9
AN3/RP0(1)/CN0/RB0
AN2/RA2
Note
AN1/RA1
MCLR
RP27(1)/CN27/RC11
RP28(1)/CN28/RC12
AN0/RA0
AVDD
AVSS
PWM1L/RA3
RP16(1)/CN16/RC0
RP29(1)/CN29/RC13
PWM1H/RA4
12 13 14 15 16 17 18 19 20 21 22
1:
The RPn pins can be used by any remappable peripheral. See the “dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 Controller Families” table for the list of available peripherals.
2:
The metal plane at the bottom of the device is not connected to any pins and is recommended to be connected to
VSS externally.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 9
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Pin Diagrams (Continued)
44-Pin QFN(2)
PGED2/DACOUT/INT0/RP3(1)/CN3/RB3
AN9/EXTREF/CMP4D/RP18(1)/CN18/RC2
PGEC2/RP4(1)/CN4/RB4
RP23(1)/CN23/RC7
VDD
VSS
RP24(1)/CN24/RC8
PGED3/RP8(1)/CN8/RB8
PGEC3/RP15(1)/CN15/RB15
PGED1/TDI/SCL/RP6(1)/CN6/RB6
TDO/RP5(1)/CN5/RB5
= Pins are up to 5V tolerant
44 43 42 41 40 39 38 37 36 35 34
PGEC1/SDA/RP7(1)/CN7/RB7
RP20(1)/CN20/RC4
RP21(1)/CN21/RC5
RP22(1)/RN22/RC6
RP19(1)/CN19/RC3
VSS
VCAP/VDDCORE
TMS/PWM3H/RP11(1)/CN11/RB11
TCK/PWM3L/RP12(1)/CN12/RB12
PWM2H/RP13(1)/CN13/RB13
PWM2L/RP14(1)/CN14/RB14
1
2
3
33
32
31
OSC2/CLKO/AN7/CMP3D/CMP4B/RP2(1)/CN2/RB2
OSC1/CLKI/AN6/CMP3C/CMP4A/RP1(1)/CN1/RB1
4
5
6
7
30
29
28
27
VSS
VDD
AN10/RP26(1)/CN26/RC10
AN11/RP25(1)/CN25/RC9
26
25
24
23
AN5/CMP2D/CMP3B/RP10(1)/CN10/RB10
dsPIC33FJ16GS504
8
9
10
11
AN8/CMP4C/RP17(1)/CN17/RC1
AN4/CMP2C/CMP3A/RP9(1)/CN9/RB9
AN3/CMP1D/CMP2B/RP0(1)/CN0/RB0
AN2/CMP1C/CMP2A/RA2
Note
DS70318D-page 10
AN1/CMP1B/RA1
MCLR
RP27(1)/CN27/RC11
RP28(1)/CN28/RC12
AN0/CMP1A/RA0
AVDD
AVSS
PWM1L/RA3
RP16(1)/CN16/RC0
RP29(1)/CN29/RC13
PWM1H/RA4
12 13 14 15 16 17 18 19 20 21 22
1:
The RPn pins can be used by any remappable peripheral. See the “dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 Controller Families” table for the list of available peripherals.
2:
The metal plane at the bottom of the device is not connected to any pins and is recommended to connect to VSS
externally.
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Pin Diagrams (Continued)
44-Pin TQFP
VDD
VSS
RP24(1)/CN24/RC8
RP23(1)/CN23/RC7
RP18(1)/CN18/RC2
PGEC2/RP4(1)/CN4/RB4
PGED2/INT0/RP3(1)/CN3/RB3
40
39
38
37
36
35
34
42
41
43
PGED1/TDI/SCL/RP6(1)/CN6/RB6
TDO/RP5(1)/CN5/RB5
PGEC3/RP15(1)/CN15/RB15
PGED3/RP8(1)/CN8/RB8
44
VDD
RP26(1)/CN26/RC10
RP25(1)/CN25/RC9
AN5/RP10(1)/CN10/RB10
AN4/RP9(1)/CN9/RB9
AN3/RP0(1)/CN0/RB0
AN2/RA2
RP28 /CN28/RC12
AN0/RA0
AN1/RA1
25
24
23
OSC2/CLKO/AN7/RP2(1)/CN2/RB2
OSC1/CLKI/AN6/RP1(1)/CN1/RB1
RP17(1)/CN17/RC1
VSS
(1)
MCLR
RP27(1)/CN27/RC11
AVDD
RP29(1)/CN29/RC13
AVSS
PWM1L/RA3
22
21
20
RP16(1)/CN16/RC0
26
19
1:
33
32
31
30
29
28
27
18
17
16
15
14
Note
dsPIC33FJ16GS404
13
12
RP19(1)/CN19/RC3
VSS
VCAP/VDDCORE
TMS/PWM3H/RP11(1)/CN11/RB11
TCK/PWM3L/RP12(1)/CN12/RB12
PWM2H/RP13(1)/CN13/RB13
PWM2L/RP14(1)/CN14/RB14
1
2
3
4
5
6
7
8
9
10
11
PWM1H/RA4
PGEC1/SDA/RP7(1)/CN7/RB7
RP20(1)/CN20/RC4
RP21(1)/CN21/RC5
RP22(1)/CN22/RC6
= Pins are up to 5V tolerant
The RPn pins can be used by any remappable peripheral. See the “dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 Controller Families” table for the list of available peripherals
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 11
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Pin Diagrams (Continued)
44-Pin TQFP
VDD
VSS
RP24(1)/CN24/RC8
RP23(1)/CN23/RC7
AN9/EXTREF/CMP4D/RP18(1)/CN18/RC2
PGEC2/RP4(1)/CN4/RB4
PGED2/DACOUT/INT0/RP3(1)/CN3/RB3
40
39
38
37
36
35
34
42
41
PGED1/TDI/SCL/RP6(1)/CN6/RB6
TDO/RP5(1)/CN5/RB5
PGEC3/RP15(1)/CN15/RB15
PGED3/RP8(1)/CN8/RB8
43
44
33
32
31
30
29
28
27
OSC2/CLKO/AN7/CMP3D/CMP4B/RP2(1)/CN2/RB2
OSC1/CLKI/AN6/CMP3C/CMP4A/RP1(1)/CN1/RB1
AN8/CMP4C/RP17(1)/CN17/RC1
VSS
26
AN5/CMP2D/CMP3B/RP10(1)/CN10/RB10
AN4/CMP2C/CMP3A/RP9(1)/CN9/RB9
25
24
23
VDD
AN10/RP26(1)/CN26/RC10
AN11/RP25(1)/CN25/RC9
AN3/CMP1D/CMP2B/RP0(1)/CN0/RB0
AN2/CMP1C/CMP2A/RA2
AN0/CMP1A/RA0
AN1/CMP1B/RA1
RP28(1)/CN28/RC12
MCLR
RP27(1)/CN27/RC11
AVDD
RP16(1)/CN16/RC0
RP29(1)/CN29/RC13
AVSS
PWM1L/RA3
22
21
20
19
DS70318D-page 12
1:
18
17
16
15
14
Note
dsPIC33FJ16GS504
13
12
RP19(1)/CN19/RC3
VSS
VCAP/VDDCORE
TMS/PWM3H/RP11(1)/CN11/RB11
TCK/PWM3L/RP12(1)/CN12/RB12
PWM2H/RP13(1)/CN13/RB13
PWM2L/RP14(1)/CN14/RB14
1
2
3
4
5
6
7
8
9
10
11
PWM1H/RA4
PGEC1/SDA/RP7(1)/CN7/RB7
RP20(1)/CN20/RC4
RP21(1)/CN21/RC5
RP22(1)/CN22/RC6
= Pins are up to 5V tolerant
The RPn pins can be used by any remappable peripheral. See the “dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 Controller Families” table for the list of available peripherals
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Table of Contents
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 Product Families .......................................................................................... 4
1.0 Device Overview ........................................................................................................................................................................ 15
2.0 Guidelines for Getting Started with 16-bit Digital Signal Controllers .......................................................................................... 19
3.0 CPU............................................................................................................................................................................................ 29
4.0 Memory Organization ................................................................................................................................................................. 41
5.0 Flash Program Memory.............................................................................................................................................................. 81
6.0 Resets ....................................................................................................................................................................................... 87
7.0 Interrupt Controller ..................................................................................................................................................................... 95
8.0 Oscillator Configuration ......................................................................................................................................................... 135
9.0 Power-Saving Features............................................................................................................................................................ 147
10.0 I/O Ports .................................................................................................................................................................................. 155
11.0 Timer1 ...................................................................................................................................................................................... 183
12.0 Timer2/3 features .................................................................................................................................................................... 185
13.0 Input Capture............................................................................................................................................................................ 191
14.0 Output Compare....................................................................................................................................................................... 193
15.0 High-Speed PWM..................................................................................................................................................................... 197
16.0 Serial Peripheral Interface (SPI)............................................................................................................................................... 217
17.0 Inter-Integrated Circuit (I2C™) ................................................................................................................................................. 223
18.0 Universal Asynchronous Receiver Transmitter (UART) ........................................................................................................... 231
19.0 High-Speed 10-bit Analog-to-Digital Converter (ADC) ............................................................................................................. 237
20.0 High-Speed Analog Comparator .............................................................................................................................................. 259
21.0 Special Features ...................................................................................................................................................................... 263
22.0 Instruction Set Summary .......................................................................................................................................................... 271
23.0 Development Support............................................................................................................................................................... 279
24.0 Electrical Characteristics .......................................................................................................................................................... 283
25.0 Packaging Information.............................................................................................................................................................. 317
Appendix A: Revision History............................................................................................................................................................. 329
Index ................................................................................................................................................................................................. 337
The Microchip Web Site ..................................................................................................................................................................... 341
Customer Change Notification Service .............................................................................................................................................. 341
Customer Support .............................................................................................................................................................................. 341
Reader Response .............................................................................................................................................................................. 342
Product Identification System ............................................................................................................................................................ 343
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 13
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TO OUR VALUED CUSTOMERS
It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip
products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and
enhanced as new volumes and updates are introduced.
If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via
E-mail at [email protected] or fax the Reader Response Form in the back of this data sheet to (480) 792-4150. We
welcome your feedback.
Most Current Data Sheet
To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at:
http://www.microchip.com
You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page.
The last character of the literature number is the version number, (e.g., DS30000A is version A of document DS30000).
Errata
An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current
devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision
of silicon and revision of document to which it applies.
To determine if an errata sheet exists for a particular device, please check with one of the following:
• Microchip’s Worldwide Web site; http://www.microchip.com
• Your local Microchip sales office (see last page)
When contacting a sales office, please specify which device, revision of silicon and data sheet (include literature number) you are
using.
Customer Notification System
Register on our web site at www.microchip.com to receive the most current information on all of our products.
DS70318D-page 14
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
1.0
Note:
DEVICE OVERVIEW
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”. Please see the
Microchip web site (www.microchip.com)
for the latest “dsPIC33F Family Reference
Manual” sections.
This document contains device-specific information for
the following dsPIC33F Digital Signal Controller (DSC)
devices:
•
•
•
•
•
•
•
dsPIC33FJ06GS101
dsPIC33FJ06GS102
dsPIC33FJ06GS202
dsPIC33FJ16GS402
dsPIC33FJ16GS404
dsPIC33FJ16GS502
dsPIC33FJ16GS504
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices contain extensive Digital Signal Processor
(DSP) functionality with a high-performance, 16-bit
microcontroller (MCU) architecture.
Figure 1-1 shows a general block diagram of the core
and peripheral modules in the dsPIC33FJ06GS101/X02
and dsPIC33FJ16GSX02/X04 devices. Table 1-1 lists
the functions of the various pins shown in the pinout
diagrams.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 15
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 1-1:
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 BLOCK DIAGRAM
PSV & Table
Data Access
Control Block
Y Data Bus
X Data Bus
Interrupt
Controller
16
8
PORTA
16
16
16
Data Latch
Data Latch
X RAM
Y RAM
Address
Latch
Address
Latch
23
PCU PCH PCL
Program Counter
Loop
Stack
Control
Control
Logic
Logic
23
PORTB
16
23
16
16
PORTC
Address Generator Units
Address Latch
Program Memory
EA MUX
Data Latch
Instruction Reg
Control Signals
to Various Blocks
FRC/LPRC
Oscillators
Precision
Band Gap
Reference
Voltage
Regulator
VCAP/VDDCORE
16
16
DSP Engine
Power-up
Timer
Divide Support
16 x 16
W Register Array
16
Oscillator
Start-up Timer
Power-on
Reset
16-Bit ALU
Watchdog
Timer
16
Brown-out
Reset
VDD, VSS
MCLR
Timers
1-3
Analog
Comparators 1-4
Note:
Literal Data
16
Instruction
Decode &
Control
Timing
Generation
Pins
ROM Latch
24
OSC2/CLKO
OSC1/CLKI
Remappable
UART1
ADC1
OC1
OC2
PWM
IC1,2
CNx
I2C1
SPI1
4x2
Not all pins or features are implemented on all device pinout configurations. See pinout diagrams for the specific pins and features
present on each device.
DS70318D-page 16
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 1-1:
Pin Name
PINOUT I/O DESCRIPTIONS
Pin
Type
Buffer
Type
PPS
Capable
Description
AN0-AN11
I
Analog
No
Analog input channels
CLKI
I
ST/CMOS
No
CLKO
O
—
No
External clock source input. Always associated with OSC1 pin
function.
Oscillator crystal output. Connects to crystal or resonator in Crystal
Oscillator mode. Optionally functions as CLKO in RC and EC
modes. Always associated with OSC2 pin function.
OSC1
I
ST/CMOS
No
OSC2
I/O
—
No
I
ST
No
CN0-CN29
Oscillator crystal input. ST buffer when configured in RC mode;
CMOS otherwise.
Oscillator crystal output. Connects to crystal or resonator in Crystal
Oscillator mode. Optionally functions as CLKO in RC and EC
modes.
Change notification inputs. Can be software programmed for
internal weak pull-ups on all inputs.
IC1-IC2
I
ST
Yes
Capture inputs 1/2
OCFA
OC1-OC2
I
O
ST
—
Yes
Yes
Compare Fault A input (for Compare Channels 1 and 2)
Compare Outputs 1 through 2
INT0
INT1
INT2
I
I
I
ST
ST
ST
No
Yes
Yes
External Interrupt 0
External Interrupt 1
External Interrupt 2
RA0-RA4
I/O
ST
No
PORTA is a bidirectional I/O port
RB0-RB15
I/O
ST
No
PORTB is a bidirectional I/O port
RC0-RC13
I/O
ST
No
PORTC is a bidirectional I/O port
RP0-RP29
I/O
ST
No
Remappable I/O pins
T1CK
T2CK
T3CK
I
I
I
ST
ST
ST
Yes
Yes
Yes
Timer1 external clock input
Timer2 external clock input
Timer3 external clock input
U1CTS
U1RTS
U1RX
U1TX
I
O
I
O
ST
—
ST
—
Yes
Yes
Yes
Yes
UART1 clear to send
UART1 ready to send
UART1 receive
UART1 transmit
SCK1
SDI1
SDO1
SS1
I/O
I
O
I/O
ST
ST
—
ST
Yes
Yes
Yes
Yes
Synchronous serial clock input/output for SPI1
SPI1 data in
SPI1 data out
SPI1 slave synchronization or frame pulse I/O
SCL1
SDA1
I/O
I/O
ST
ST
No
No
Synchronous serial clock input/output for I2C1
Synchronous serial data input/output for I2C1
TMS
TCK
TDI
TDO
I
I
I
O
TTL
TTL
TTL
—
No
No
No
No
JTAG Test mode select pin
JTAG test clock input pin
JTAG test data input pin
JTAG test data output pin
Legend: CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels
TTL = Transistor-Transistor Logic
© 2009 Microchip Technology Inc.
Analog = Analog input
I = Input
P = Power
O = Output
PPS = Peripheral Pin Select
Preliminary
DS70318D-page 17
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 1-1:
Pin Name
CMP1A
CMP1B
CMP1C
CMP1D
CMP2A
CMP2B
CMP2C
CMP2D
CMP3A
CMP3B
CMP3C
CMP3D
CMP4A
CMP4B
CMP4C
CMP4D
PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin
Type
Buffer
Type
PPS
Capable
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Description
Comparator 1 Channel A
Comparator 1 Channel B
Comparator 1 Channel C
Comparator 1 Channel D
Comparator 2 Channel A
Comparator 2 Channel B
Comparator 2 Channel C
Comparator 2 Channel D
Comparator 3 Channel A
Comparator 3 Channel B
Comparator 3 Channel C
Comparator 3 Channel D
Comparator 4 Channel A
Comparator 4 Channel B
Comparator 4 Channel C
Comparator 4 Channel D
DACOUT
O
—
No
DAC output voltage
ACMP1-ACMP4
O
—
Yes
DAC trigger to PWM module
EXTREF
I
Analog
No
External voltage reference input for the reference DACs
REFCLKO
O
—
Yes
REFCLKO output signal is a postscaled derivative of the system
clock
FLT1-FLT8
SYNCI1-SYNCI2
SYNCO1
PWM1L
PWM1H
PWM2L
PWM2H
PWM3L
PWM3H
PWM4L
PWM4H
I
I
O
O
O
O
O
O
O
O
O
ST
ST
—
—
—
—
—
—
—
—
—
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Fault Inputs to PWM module
External synchronization signal to PWM Master Time Base
PWM master time base for external device synchronization
PWM1 low output
PWM1 high output
PWM2 low output
PWM2 high output
PWM3 low output
PWM3 high output
PWM4 low output
PWM4 high output
PGED1
PGEC1
I/O
I
ST
ST
No
No
PGED2
PGEC2
I/O
I
ST
ST
No
No
PGED3
PGEC3
I/O
I
ST
ST
No
No
Data I/O pin for programming/debugging communication Channel 1
Clock input pin for programming/debugging communication
Channel 1
Data I/O pin for programming/debugging communication Channel 2
Clock input pin for programming/debugging communication
Channel 2
Data I/O pin for programming/debugging communication Channel 3
Clock input pin for programming/debugging communication
Channel 3
MCLR
I/P
ST
No
Master Clear (Reset) input. This pin is an active-low Reset to the
device.
AVDD
P
P
No
Positive supply for analog modules. This pin must be connected at
all times.
AVSS
P
P
No
Ground reference for analog modules
VDD
P
—
No
Positive supply for peripheral logic and I/O pins
VCAP/VDDCORE
P
—
No
CPU logic filter capacitor connection
VSS
P
—
No
Ground reference for logic and I/O pins
Legend: CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels
TTL = Transistor-Transistor Logic
DS70318D-page 18
Analog = Analog input
I = Input
P = Power
O = Output
PPS = Peripheral Pin Select
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
2.0
Note:
2.1
GUIDELINES FOR GETTING
STARTED WITH 16-BIT
DIGITAL SIGNAL
CONTROLLERS
2.2
The use of decoupling capacitors on every pair of
power supply pins, such as VDD, VSS, AVDD and
AVSS is required.
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04
family
of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the dsPIC33F Family
Reference Manual, which is available from
the
Microchip
website
(www.microchip.com).
Basic Connection Requirements
Getting started with the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 family of 16-bit Digital Signal
Controllers (DSC) requires attention to a minimal set of
device pin connections before proceeding with
development. The following is a list of pin names, which
must always be connected:
• All VDD and VSS pins
(see Section 2.2 “Decoupling Capacitors”)
• All AVDD and AVSS pins (regardless if ADC module
is not used)
(see Section 2.2 “Decoupling Capacitors”)
• VCAP/VDDCORE
(see Section 2.3 “Capacitor on Internal Voltage
Regulator (VCAP/VDDCORE)”)
• MCLR pin
(see Section 2.4 “Master Clear (MCLR) Pin”)
• PGECx/PGEDx pins used for In-Circuit Serial
Programming™ (ICSP™) and debugging purposes
(see Section 2.5 “ICSP Pins”)
• OSC1 and OSC2 pins when external oscillator
source is used
(see Section 2.6 “External Oscillator Pins”)
© 2009 Microchip Technology Inc.
Decoupling Capacitors
Consider the following criteria when using decoupling
capacitors:
• Value and type of capacitor: Recommendation
of 0.1 μF (100 nF), 10-20V. This capacitor should
be a low-ESR and have resonance frequency in
the range of 20 MHz and higher. It is
recommended that ceramic capacitors be used.
• Placement on the printed circuit board: The
decoupling capacitors should be placed as close
to the pins as possible. It is recommended to
place the capacitors on the same side of the
board as the device. If space is constricted, the
capacitor can be placed on another layer on the
PCB using a via; however, ensure that the trace
length from the pin to the capacitor is within
one-quarter inch (6 mm) in length.
• Handling high frequency noise: If the board is
experiencing high frequency noise, upward of
tens of MHz, add a second ceramic-type capacitor
in parallel to the above described decoupling
capacitor. The value of the second capacitor can
be in the range of 0.01 μF to 0.001 μF. Place this
second capacitor next to the primary decoupling
capacitor. In high-speed circuit designs, consider
implementing a decade pair of capacitances as
close to the power and ground pins as possible.
For example, 0.1 μF in parallel with 0.001 μF.
• Maximizing performance: On the board layout
from the power supply circuit, run the power and
return traces to the decoupling capacitors first,
and then to the device pins. This ensures that the
decoupling capacitors are first in the power chain.
Equally important is to keep the trace length
between the capacitor and the power pins to a
minimum thereby reducing PCB track inductance.
Preliminary
DS70318D-page 19
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 2-1:
RECOMMENDED
MINIMUM CONNECTION
0.1 μF
Ceramic
R1
MCLR
C
10 Ω
2.2.1
VDD
0.1 μF
Ceramic
VSS
VSS
AVSS
VDD
AVDD
0.1 μF
Ceramic
VDD
The MCLR pin provides for two specific device
functions:
During device programming and debugging, the
resistance and capacitance that can be added to the
pin must be considered. Device programmers and
debuggers drive the MCLR pin. Consequently,
specific voltage levels (VIH and VIL) and fast signal
transitions must not be adversely affected. Therefore,
specific values of R and C will need to be adjusted
based on the application and PCB requirements.
dsPIC33F
VSS
Master Clear (MCLR) Pin
• Device Reset
• Device programming and debugging.
VSS
R
VDD
VCAP/VDDCORE
VDD
2.4
0.1 μF
Ceramic
0.1 μF
Ceramic
For example, as shown in Figure 2-2, it is
recommended that the capacitor C, be isolated from
the MCLR pin during programming and debugging
operations.
Place the components shown in Figure 2-2 within
one-quarter inch (6 mm) from the MCLR pin.
FIGURE 2-2:
TANK CAPACITORS
On boards with power traces running longer than six
inches in length, it is suggested to use a tank capacitor
for integrated circuits including DSCs to supply a local
power source. The value of the tank capacitor should
be determined based on the trace resistance that connects the power supply source to the device, and the
maximum current drawn by the device in the application. In other words, select the tank capacitor so that it
meets the acceptable voltage sag at the device. Typical
values range from 4.7 μF to 47 μF.
2.3
Capacitor on Internal Voltage
Regulator (VCAP/VDDCORE)
EXAMPLE OF MCLR PIN
CONNECTIONS
VDD
R
R1
JP
MCLR
dsPIC33F
C
Note 1:
R ≤ 10 kΩ is recommended. A suggested
starting value is 10 kΩ. Ensure that the
MCLR pin VIH and VIL specifications are met.
2:
R1 ≤ 470Ω will limit any current flowing into
MCLR from the external capacitor C, in the
event of MCLR pin breakdown, due to
Electrostatic Discharge (ESD) or Electrical
Overstress (EOS). Ensure that the MCLR pin
VIH and VIL specifications are met.
A low-ESR (< 5 Ohms) capacitor is required on the
VCAP/VDDCORE pin, which is used to stabilize the
voltage regulator output voltage. The VCAP/VDDCORE
pin must not be connected to VDD, and must have a
capacitor between 4.7 μF and 10 μF, 16V connected to
ground. The type can be ceramic or tantalum. Refer to
Section 24.0 “Electrical Characteristics” for
additional information.
The placement of this capacitor should be close to the
VCAP/VDDCORE. It is recommended that the trace
length not exceed one-quarter inch (6 mm). Refer to
Section 21.2 “On-Chip Voltage Regulator” for
details.
DS70318D-page 20
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
2.5
ICSP Pins
2.6
The PGECx and PGEDx pins are used for In-Circuit
Serial Programming™ (ICSP™) and debugging
purposes. It is recommended to keep the trace length
between the ICSP connector and the ICSP pins on the
device as short as possible. If the ICSP connector is
expected to experience an ESD event, a series resistor
is recommended, with the value in the range of a few
tens of Ohms, not to exceed 100 Ohms.
Pull-up resistors, series diodes, and capacitors on the
PGECx and PGEDx pins are not recommended as they
will interfere with the programmer/debugger
communications to the device. If such discrete
components are an application requirement, they
should be removed from the circuit during programming and debugging. Alternatively, refer to the AC/DC
characteristics and timing requirements information in
the respective device Flash programming specification
for information on capacitive loading limits and pin input
voltage high (VIH) and input low (VIL) requirements.
Ensure that the “Communication Channel Select”
(i.e., PGECx/PGEDx pins) programmed into the device
matches the physical connections for the ICSP to
MPLAB® ICD 2, MPLAB® ICD 3, or MPLAB® REAL
ICE™.
Many DSCs have options for at least two oscillators: a
high-frequency primary oscillator and a low-frequency
secondary oscillator (refer to Section 8.0 “Oscillator
Configuration” for details).
The oscillator circuit should be placed on the same
side of the board as the device. Also, place the
oscillator circuit close to the respective oscillator pins,
not exceeding one-half inch (12 mm) distance
between them. The load capacitors should be placed
next to the oscillator itself, on the same side of the
board. Use a grounded copper pour around the
oscillator circuit to isolate them from surrounding
circuits. The grounded copper pour should be routed
directly to the MCU ground. Do not run any signal
traces or power traces inside the ground pour. Also, if
using a two-sided board, avoid any traces on the
other side of the board where the crystal is placed. A
suggested layout is shown in Figure 2-3.
FIGURE 2-3:
For more information on ICD 2, ICD 3, and REAL ICE
connection requirements, refer to the following
documents that are available on the Microchip website.
• “MPLAB® ICD 2 In-Circuit Debugger User's
Guide” DS51331
• “Using MPLAB® ICD 2” (poster) DS51265
• “MPLAB® ICD 2 Design Advisory” DS51566
• “Using MPLAB® ICD 3” (poster) DS51765
• “MPLAB® ICD 3 Design Advisory” DS51764
• “MPLAB® REAL ICE™ In-Circuit Debugger
User's Guide” DS51616
• “Using MPLAB® REAL ICE™” (poster) DS51749
© 2009 Microchip Technology Inc.
External Oscillator Pins
Preliminary
SUGGESTED PLACEMENT
OF THE OSCILLATOR
CIRCUIT
Main Oscillator
13
Guard Ring
14
15
Guard Trace
Secondary
Oscillator
16
17
18
19
20
DS70318D-page 21
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
2.7
Oscillator Value Conditions on
Device Start-up
If the PLL of the target device is enabled and
configured for the device start-up oscillator, the
maximum oscillator source frequency must be limited
to 4 MHz < FIN < 8 MHz to comply with device PLL
start-up conditions. This means that if the external
oscillator frequency is outside this range, the
application must start up in the FRC mode first. The
default PLL settings after a POR with an oscillator
frequency outside this range will violate the device
operating speed.
Once the device powers up, the application firmware
can initialize the PLL SFRs, CLKDIV, and PLLDBF to a
suitable value, and then perform a clock switch to the
Oscillator + PLL clock source. Note that clock switching
must be enabled in the device Configuration word.
2.8
Configuration of Analog and
Digital Pins During ICSP
Operations
If your application needs to use certain A/D pins as
analog input pins during the debug session, the user
application must clear the corresponding bits in the
ADPCFG register during initialization of the ADC module.
When MPLAB ICD 2, ICD 3, or REAL ICE is used as a
programmer, the user application firmware must
correctly configure the ADPCFG register. Automatic
initialization of these registers is only done during
debugger operation. Failure to correctly configure the
register(s) will result in all A/D pins being recognized as
analog input pins, resulting in the port value being read
as a logic '0', which may affect user application functionality.
2.9
Unused I/Os
Unused I/O pins should be configured as outputs and
driven to a logic-low state.
Alternatively, connect a 1k to 10k resistor to VSS on
unused pins and drive the output to logic low.
If MPLAB ICD 2, ICD 3 or REAL ICE is selected as a
debugger, it automatically initializes all of the A/D input
pins (ANx) as “digital” pins, by setting all bits in the
ADPCFG register.
2.10
Typical Application Connection
Examples
Examples of typical application connections are shown
in Figure 2-4 through Figure 2-11.
The bits in the registers that correspond to the A/D pins
that are initialized by MPLAB ICD 2, ICD 3, or REAL
ICE, must not be cleared by the user application firmware; otherwise, communication errors will result
between the debugger and the device.
DS70318D-page 22
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 2-4:
DIGITAL PFC
IPFC
VHV_BUS
|VAC|
k1
k3
VAC
k2
ADC Channel
FET
Driver
ADC Channel PWM Output
ADC Channel
dsPIC33FJ06GS101
FIGURE 2-5:
BOOST CONVERTER IMPLEMENTATION
IPFC
VINPUT
VOUTPUT
k1
k3
ADC Channel
k2
FET
Driver
ADC
Channel
PWM
Output
ADC Channel
dsPIC33FJ06GS101
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 23
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 2-6:
SINGLE-PHASE SYNCHRONOUS BUCK CONVERTER
12V Input
5V Output
I5V
FET
Driver
k7
Analog
Comp.
PWM
PWM
ADC
Channel
k1
k2
ADC
Channel
dsPIC33FJ06GS202
FIGURE 2-7:
MULTI-PHASE SYNCHRONOUS BUCK CONVERTER
3.3V Output
FET
Driver
dsPIC33FJ06GS502
PWM
ADC
Channel
FET
Driver
PWM
k7
PWM
PWM
12V Input
k6
PWM
PWM
FET
Driver
Analog Comparator
k3
Analog Comparator
k4
Analog Comparator
k5
ADC Channel
DS70318D-page 24
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 2-8:
OFF-LINE UPS
VDC
Push-Pull Converter
Full-Bridge Inverter
VOUT+
VBAT
+
VOUTGND
GND
FET
Driver
FET
Driver
PWM
PWM
k2
k1
ADC ADC
or
Analog Comp.
k3
FET
Driver
FET
Driver
FET
Driver
FET
Driver
PWM
PWM
PWM
PWM
dsPIC33FJ16GS504
ADC
k4
k5
ADC
ADC
ADC
PWM
FET
Driver
k6
+
Battery Charger
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 25
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 2-9:
INTERLEAVED PFC
VOUT+
|VAC|
k4
VAC
k3
k1
k2
VOUTFET
Driver
ADC Channel
ADC Channel
DS70318D-page 26
PWM
FET
Driver
ADC
Channel
PWM
ADC
Channel
ADC
Channel
dsPIC33FJ06GS202
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 2-10:
PHASE-SHIFTED FULL-BRIDGE CONVERTER
VIN+
Gate 6
Gate 3
Gate 1
VOUT+
S1
S3
VOUT-
Gate 2
Gate 4
Gate 5
Gate 6
Gate 5
VIN-
FET
Driver
k2
PWM
ADC
Channel
k1
Analog
Ground
Gate 1
S1
FET
Driver
PWM
Gate 3
S3
FET
Driver
ADC
Channel
dsPIC33FJ06GS202
PWM
Gate 2
Gate 4
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 27
PWM
Preliminary
k1
ADC
Ch.
|VAC|
k2
ADC
Ch.
k4
IZVT
IPFC
FET Driver
UART
RX
PWM
PWM
ADC
ADC
Channel Channel
FET
Driver
PWM
Output
PFC Stage
VAC
ADC
Ch.
PWM
Primary Controller
dsPIC33FJ16GS504
PWM
FET
Driver
PWM
VHV_BUS
Isolation
Barrier
FET
Driver
VHV_BUS
k3
UART
TX
ADC
Channel
k5
Analog
Comp.
ADC
Channel
k7
Secondary Controller
dsPIC33FJ16GS504
k6
FET
Driver
5V Buck Stage
12V Input
VOUT
PWM
PWM
ZVT with Current Doubler Synchronous Rectifier
I5V
5V Output
FET
Driver
ADC Channel
Analog Comparator
Analog Comparator
Analog Comparator
PWM
PWM
FET
Driver
FET
Driver
k10
k9
k8
3.3V Multi-Phase Buck Stage
AC-TO-DC POWER SUPPLY WITH PFC AND THREE OUTPUTS (12V, 5V, AND 3.3V)
PWM
PWM
DS70318D-page 28
PWM
PWM
FIGURE 2-11:
I3.3V_3
I3.3V_2
I3.3V_1
k11
3.3V Output
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
3.0
Note:
CPU
3.1
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 2. “CPU”
(DS70204), which is available from the
Microchip web site (www.microchip.com).
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 CPU module has a 16-bit (data) modified Harvard
architecture with an enhanced instruction set, including
significant support for DSP. The CPU has a 24-bit
instruction word with a variable length opcode field. The
Program Counter (PC) is 23 bits wide and addresses up
to 4M x 24 bits of user program memory space. The
actual amount of program memory implemented varies
from device to device. A single-cycle instruction prefetch
mechanism is used to help maintain throughput and
provides predictable execution. All instructions execute in
a single cycle, with the exception of instructions that
change the program flow, the double-word move (MOV.D)
instruction and the table instructions. Overhead-free
program loop constructs are supported using the DO and
REPEAT instructions, both of which are interruptible at
any point.
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices have sixteen, 16-bit working registers in the
programmer’s model. Each of the working registers can
serve as a data, address or address offset register. The
sixteenth working register (W15) operates as a software
Stack Pointer (SP) for interrupts and calls.
There are two classes of instruction in the
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices: MCU and DSP. These two instruction
classes are seamlessly integrated into a single CPU.
The instruction set includes many addressing modes
and is designed for optimum C compiler efficiency.
For most instructions, the dsPIC33FJ06GS101/X02
and dsPIC33FJ16GSX02/X04 is capable of executing a data (or program data) memory read, a working register (data) read, a data memory write and a
program (instruction) memory read per instruction
cycle. As a result, three parameter instructions can
be supported, allowing A + B = C operations to be
executed in a single cycle.
Data Addressing Overview
The data space can be addressed as 32K words or
64 Kbytes and is split into two blocks, referred to as X
and Y data memory. Each memory block has its own
independent Address Generation Unit (AGU). The
MCU class of instructions operates solely through
the X memory AGU, which accesses the entire
memory map as one linear data space. Certain DSP
instructions operate through the X and Y AGUs to
support dual operand reads, which splits the data
address space into two parts. The X and Y data space
boundary is device-specific.
Overhead-free circular buffers (Modulo Addressing
mode) are supported in both X and Y address spaces.
The Modulo Addressing removes the software
boundary checking overhead for DSP algorithms.
Furthermore, the X AGU circular addressing can be
used with any of the MCU class of instructions. The X
AGU also supports Bit-Reversed Addressing to greatly
simplify input or output data reordering for radix-2 FFT
algorithms.
The upper 32 Kbytes of the data space memory map
can optionally be mapped into program space at any
16K program word boundary defined by the 8-bit
Program Space Visibility Page (PSVPAG) register. The
program-to-data space mapping feature lets any
instruction access program space as if it were data
space.
3.2
DSP Engine Overview
The DSP engine features a high-speed, 17-bit by 17-bit
multiplier, a 40-bit ALU, two 40-bit saturating
accumulators and a 40-bit bidirectional barrel shifter.
The barrel shifter is capable of shifting a 40-bit value up
to 16 bits, right or left, in a single cycle. The DSP
instructions operate seamlessly with all other
instructions and have been designed for optimal realtime performance. The MAC instruction and other associated instructions can concurrently fetch two data
operands from memory while multiplying two W
registers and accumulating and optionally saturating
the result in the same cycle. This instruction
functionality requires that the RAM data space be split
for these instructions and linear for all others. Data
space partitioning is achieved in a transparent and
flexible manner through dedicating certain working
registers to each address space.
A block diagram of the CPU is shown in Figure 3-1,
and
the
programmer’s
model
for
the
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 is shown in Figure 3-2.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 29
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
3.3
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 supports 16/16 and 32/16 divide operations, both
fractional and integer. All divide instructions are iterative
operations. They must be executed within a REPEAT
loop, resulting in a total execution time of 19 instruction
cycles. The divide operation can be interrupted during
any of those 19 cycles without loss of data.
Special MCU Features
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 features a 17-bit by 17-bit single-cycle multiplier that
is shared by both the MCU ALU and DSP engine. The
multiplier can perform signed, unsigned and mixed sign
multiplication. Using a 17-bit by 17-bit multiplier for 16-bit
by 16-bit multiplication not only allows you to perform
mixed sign multiplication, it also achieves accurate
results for special operations, such as (-1.0) x (-1.0).
FIGURE 3-1:
A 40-bit barrel shifter is used to perform up to a 16-bit
left or right shift in a single cycle. The barrel shifter can
be used by both MCU and DSP instructions.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 CPU CORE
BLOCK DIAGRAM
PSV & Table
Data Access
Control Block
Y Data Bus
X Data Bus
Interrupt
Controller
8
16
23
23
PCU PCH PCL
Program Counter
Loop
Stack
Control
Control
Logic
Logic
16
16
16
Data Latch
Data Latch
X RAM
Y RAM
Address
Latch
Address
Latch
23
16
16
16
Address Generator Units
Address Latch
Program Memory
EA MUX
Data Latch
ROM Latch
24
Instruction Reg
16
Literal Data
Instruction
Decode &
Control
16
16
Control Signals
to Various Blocks
DSP Engine
Divide Support
16 x 16
W Register Array
16
16-Bit ALU
16
To Peripheral Modules
DS70318D-page 30
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 3-2:
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 PROGRAMMER’S MODEL
D15
D0
W0/WREG
PUSH.S Shadow
W1
DO Shadow
W2
W3
Legend
W4
DSP Operand
Registers
W5
W6
W7
Working Registers
W8
W9
DSP Address
Registers
W10
W11
W12/DSP Offset
W13/DSP Write Back
W14/Frame Pointer
W15/Stack Pointer
Stack Pointer Limit Register
SPLIM
AD39
DSP
Accumulators
AD15
AD31
AD0
ACCA
ACCB
PC22
PC0
Program Counter
0
0
7
TBLPAG
Data Table Page Address
7
0
PSVPAG
Program Space Visibility Page Address
15
0
RCOUNT
REPEAT Loop Counter
15
0
DCOUNT
DO Loop Counter
22
0
DOSTART
DO Loop Start Address
DOEND
DO Loop End Address
22
15
0
Core Configuration Register
CORCON
OA
OB
SA
SB OAB SAB DA
SRH
© 2009 Microchip Technology Inc.
DC
IPL2 IPL1 IPL0 RA
N
OV
Z
C
STATUS Register
SRL
Preliminary
DS70318D-page 31
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
3.4
CPU Control Registers
REGISTER 3-1:
SR: CPU STATUS REGISTER
R-0
R-0
R/C-0
R/C-0
R-0
R/C-0
R -0
R/W-0
OA
OB
SA(1)
SB(1)
OAB
SAB(1,4)
DA
DC
bit 15
bit 8
R/W-0(2)
R/W-0(3)
R/W-0(3)
IPL<2:0>(2)
R-0
R/W-0
R/W-0
R/W-0
R/W-0
RA
N
OV
Z
C
bit 7
bit 0
Legend:
C = Clearable bit
R = Readable bit
U = Unimplemented bit, read as ‘0’
S = Settable bit
W = Writable bit
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
OA: Accumulator A Overflow Status bit
1 = Accumulator A overflowed
0 = Accumulator A has not overflowed
bit 14
OB: Accumulator B Overflow Status bit
1 = Accumulator B overflowed
0 = Accumulator B has not overflowed
bit 13
SA: Accumulator A Saturation ‘Sticky’ Status bit(1)
1 = Accumulator A is saturated or has been saturated at some time
0 = Accumulator A is not saturated
bit 12
SB: Accumulator B Saturation ‘Sticky’ Status bit(1)
1 = Accumulator B is saturated or has been saturated at some time
0 = Accumulator B is not saturated
bit 11
OAB: OA || OB Combined Accumulator Overflow Status bit
1 = Accumulators A or B have overflowed
0 = Neither Accumulators A or B have overflowed
bit 10
SAB: SA || SB Combined Accumulator ‘Sticky’ Status bit(1,4)
1 = Accumulators A or B are saturated or have been saturated at some time in the past
0 = Neither Accumulator A or B are saturated
bit 9
DA: DO Loop Active bit
1 = DO loop in progress
0 = DO loop not in progress
bit 8
DC: MCU ALU Half Carry/Borrow bit
1 = A carry-out from the 4th low-order bit (for byte-sized data) or 8th low-order bit (for word-sized data)
of the result occurred
0 = No carry-out from the 4th low-order bit (for byte-sized data) or 8th low-order bit (for word-sized
data) of the result occurred
Note 1: This bit can be read or cleared (not set).
2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority
Level (IPL). The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when
IPL<3> = 1.
3: The IPL<2:0> Status bits are read-only when NSTDIS = 1 (INTCON1<15>).
4: Clearing this bit will clear SA and SB.
DS70318D-page 32
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 3-1:
SR: CPU STATUS REGISTER (CONTINUED)
bit 7-5
IPL<2:0>: CPU Interrupt Priority Level Status bits(2)
111 = CPU Interrupt Priority Level is 7 (15), user interrupts disabled
110 = CPU Interrupt Priority Level is 6 (14)
101 = CPU Interrupt Priority Level is 5 (13)
100 = CPU Interrupt Priority Level is 4 (12)
011 = CPU Interrupt Priority Level is 3 (11)
010 = CPU Interrupt Priority Level is 2 (10)
001 = CPU Interrupt Priority Level is 1 (9)
000 = CPU Interrupt Priority Level is 0 (8)
bit 4
RA: REPEAT Loop Active bit
1 = REPEAT loop in progress
0 = REPEAT loop not in progress
bit 3
N: MCU ALU Negative bit
1 = Result was negative
0 = Result was non-negative (zero or positive)
bit 2
OV: MCU ALU Overflow bit
This bit is used for signed arithmetic (2’s complement). It indicates an overflow of a magnitude that
causes the sign bit to change state.
1 = Overflow occurred for signed arithmetic (in this arithmetic operation)
0 = No overflow occurred
bit 1
Z: MCU ALU Zero bit
1 = An operation that affects the Z bit has set it at some time in the past
0 = The most recent operation that affects the Z bit has cleared it (i.e., a non-zero result)
bit 0
C: MCU ALU Carry/Borrow bit
1 = A carry-out from the Most Significant bit of the result occurred
0 = No carry-out from the Most Significant bit of the result occurred
Note 1: This bit can be read or cleared (not set).
2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority
Level (IPL). The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when
IPL<3> = 1.
3: The IPL<2:0> Status bits are read-only when NSTDIS = 1 (INTCON1<15>).
4: Clearing this bit will clear SA and SB.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 33
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 3-2:
CORCON: CORE CONTROL REGISTER
U-0
—
bit 15
U-0
—
R/W-0
SATA
bit 7
R/W-0
SATB
bit 11
bit 10-8
R/W-0
US
R/W-0
EDT(1)
R-0
R-0
DL<2:0>
R-0
bit 8
Legend:
R = Readable bit
0’ = Bit is cleared
bit 15-13
bit 12
U-0
—
R/W-1
SATDW
R/W-0
ACCSAT
C = Clearable bit
W = Writable bit
‘x = Bit is unknown
R/C-0
IPL3(2)
R/W-0
PSV
R/W-0
RND
R/W-0
IF
bit 0
-n = Value at POR
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
Unimplemented: Read as ‘0’
US: DSP Multiply Unsigned/Signed Control bit
1 = DSP engine multiplies are unsigned
0 = DSP engine multiplies are signed
EDT: Early DO Loop Termination Control bit(1)
1 = Terminate executing DO loop at end of current loop iteration
0 = No effect
DL<2:0>: DO Loop Nesting Level Status bits
111 = 7 DO loops active
•
•
•
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
001 = 1 DO loop active
000 = 0 DO loops active
SATA: ACCA Saturation Enable bit
1 = Accumulator A saturation enabled
0 = Accumulator A saturation disabled
SATB: ACCB Saturation Enable bit
1 = Accumulator B saturation enabled
0 = Accumulator B saturation disabled
SATDW: Data Space Write from DSP Engine Saturation Enable bit
1 = Data space write saturation enabled
0 = Data space write saturation disabled
ACCSAT: Accumulator Saturation Mode Select bit
1 = 9.31 saturation (super saturation)
0 = 1.31 saturation (normal saturation)
IPL3: CPU Interrupt Priority Level Status bit 3(2)
1 = CPU Interrupt Priority Level is greater than 7
0 = CPU Interrupt Priority Level is 7 or less
PSV: Program Space Visibility in Data Space Enable bit
1 = Program space visible in data space
0 = Program space not visible in data space
RND: Rounding Mode Select bit
1 = Biased (conventional) rounding enabled
0 = Unbiased (convergent) rounding enabled
IF: Integer or Fractional Multiplier Mode Select bit
1 = Integer mode enabled for DSP multiply ops
0 = Fractional mode enabled for DSP multiply ops
Note 1: This bit will always read as ‘0’.
2: The IPL3 bit is concatenated with the IPL<2:0> bits (SR<7:5>) to form the CPU Interrupt Priority Level.
DS70318D-page 34
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
3.5
3.5.2
Arithmetic Logic Unit (ALU)
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 ALU is 16 bits wide and is capable of addition,
subtraction, bit shifts and logic operations. Unless
otherwise mentioned, arithmetic operations are 2’s
complement in nature. Depending on the operation, the
ALU can affect the values of the Carry (C), Zero (Z),
Negative (N), Overflow (OV) and Digit Carry (DC) Status
bits in the SR register. The C and DC Status bits operate
as Borrow and Digit Borrow bits, respectively, for
subtraction operations.
The ALU can perform 8-bit or 16-bit operations,
depending on the mode of the instruction that is used.
Data for the ALU operation can come from the W
register array or data memory, depending on the
addressing mode of the instruction. Likewise, output
data from the ALU can be written to the W register array
or a data memory location.
Refer to the “dsPIC30F/33F Programmer’s Reference
Manual” (DS70157) for information on the SR bits
affected by each instruction.
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 CPU incorporates hardware support for both multiplication and division. This includes a dedicated hardware
multiplier and support hardware for 16-bit-divisor division.
3.5.1
MULTIPLIER
Using the high-speed, 17-bit x 17-bit multiplier of the
DSP engine, the ALU supports unsigned, signed or
mixed sign operation in several MCU multiplication
modes:
•
•
•
•
•
•
•
16-bit x 16-bit signed
16-bit x 16-bit unsigned
16-bit signed x 5-bit (literal) unsigned
16-bit unsigned x 16-bit unsigned
16-bit unsigned x 5-bit (literal) unsigned
16-bit unsigned x 16-bit signed
8-bit unsigned x 8-bit unsigned
DIVIDER
The divide block supports 32-bit/16-bit and 16-bit/16-bit
signed and unsigned integer divide operations with the
following data sizes:
•
•
•
•
32-bit signed/16-bit signed divide
32-bit unsigned/16-bit unsigned divide
16-bit signed/16-bit signed divide
16-bit unsigned/16-bit unsigned divide
The quotient for all divide instructions ends up in W0 and
the remainder in W1. 16-bit signed and unsigned DIV
instructions can specify any W register for both the 16-bit
divisor (Wn) and any W register (aligned) pair
(W(m + 1):Wm) for the 32-bit dividend. The divide
algorithm takes one cycle per bit of divisor, so both 32-bit/
16-bit and 16-bit/16-bit instructions take the same
number of cycles to execute.
3.6
DSP Engine
The DSP engine consists of a high-speed, 17-bit x
17-bit multiplier, a barrel shifter and a 40-bit adder/
subtracter (with two target accumulators, round and
saturation logic).
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 is a single-cycle instruction flow architecture; therefore, concurrent operation of the DSP engine with MCU
instruction flow is not possible. However, some MCU ALU
and DSP engine resources can be used concurrently by
the same instruction (for example, ED, EDAC).
The DSP engine can also perform inherent
accumulator-to-accumulator operations that require no
additional data. These instructions are ADD, SUB and
NEG.
The DSP engine has options selected through bits in
the CPU Core Control register (CORCON), as listed
below:
•
•
•
•
•
•
Fractional or integer DSP multiply (IF)
Signed or unsigned DSP multiply (US)
Conventional or convergent rounding (RND)
Automatic saturation on/off for ACCA (SATA)
Automatic saturation on/off for ACCB (SATB)
Automatic saturation on/off for writes to data
memory (SATDW)
• Accumulator Saturation mode selection
(ACCSAT)
A block diagram of the DSP engine is shown in
Figure 3-3.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 35
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 3-1:
DSP INSTRUCTIONS SUMMARY
Instruction
Algebraic Operation
CLR
A=0
ED
EDAC
MAC
MAC
MOVSAC
MPY
MPY
MPY.N
MSC
A = (x – y)2
A = A + (x – y)2
A = A + (x * y)
A = A + x2
No change in A
A=x*y
A=x2
A=–x*y
A=A–x*y
FIGURE 3-3:
ACC Write Back
Yes
No
No
Yes
No
Yes
No
No
No
Yes
DSP ENGINE BLOCK DIAGRAM
40
40-bit Accumulator A
40-bit Accumulator B
Carry/Borrow Out
Carry/Borrow In
40
Saturate
S
a
Round t 16
u
Logic r
a
t
e
Adder
Negate
40
40
40
16
X Data Bus
Barrel
Shifter
40
Y Data Bus
Sign-Extend
32
Zero Backfill
16
32
33
17-Bit
Multiplier/Scaler
16
16
To/From W Array
DS70318D-page 36
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
3.6.1
MULTIPLIER
3.6.2.1
The 17-bit x 17-bit multiplier is capable of signed or
unsigned operation and can multiplex its output using a
scaler to support either 1.31 fractional (Q31) or 32-bit
integer results. Unsigned operands are zero-extended
into the 17th bit of the multiplier input value. Signed
operands are sign-extended into the 17th bit of the
multiplier input value. The output of the 17-bit x 17-bit
multiplier/scaler is a 33-bit value that is sign-extended
to 40 bits. Integer data is inherently represented as a
signed 2’s complement value, where the Most
Significant bit (MSb) is defined as a sign bit. The range
of an N-bit 2’s complement integer is -2N-1 to 2N-1 – 1.
• For a 16-bit integer, the data range is -32768
(0x8000) to 32767 (0x7FFF) including 0.
• For a 32-bit integer, the data range is
-2,147,483,648 (0x8000 0000) to 2,147,483,647
(0x7FFF FFFF).
When the multiplier is configured for fractional
multiplication, the data is represented as a 2’s
complement fraction, where the MSb is defined as a
sign bit and the radix point is implied to lie just after the
sign bit (QX format). The range of an N-bit 2’s
complement fraction with this implied radix point is -1.0
to (1 – 21-N). For a 16-bit fraction, the Q15 data range
is -1.0 (0x8000) to 0.999969482 (0x7FFF) including 0
and has a precision of 3.01518x10-5. In Fractional
mode, the 16 x 16 multiply operation generates a
1.31 product that has a precision of 4.65661 x 10-10.
The same multiplier is used to support the MCU
multiply instructions, which include integer 16-bit
signed, unsigned and mixed sign multiply operations.
The MUL instruction can be directed to use byte or
word-sized operands. Byte operands will direct a 16-bit
result, and word operands will direct a 32-bit result to
the specified register(s) in the W array.
3.6.2
DATA ACCUMULATORS AND
ADDER/SUBTRACTER
The data accumulator consists of a 40-bit adder/
subtracter with automatic sign extension logic. It can
select one of two accumulators (A or B) as its preaccumulation
source
and
post-accumulation
destination. For the ADD and LAC instructions, the data
to be accumulated or loaded can be optionally scaled
using the barrel shifter prior to accumulation.
© 2009 Microchip Technology Inc.
Adder/Subtracter, Overflow and
Saturation
The adder/subtracter is a 40-bit adder with an optional
zero input into one side, and either true or complement
data into the other input.
• In the case of addition, the Carry/Borrow input is
active-high and the other input is true data (not
complemented).
• In the case of subtraction, the Carry/Borrow input
is active-low and the other input is complemented.
The adder/subtracter generates Overflow Status bits,
SA/SB and OA/OB, which are latched and reflected in
the STATUS register:
• Overflow from bit 39: this is a catastrophic
overflow in which the sign of the accumulator is
destroyed.
• Overflow into guard bits, 32 through 39: this is a
recoverable overflow. This bit is set whenever all
the guard bits are not identical to each other.
The adder has an additional saturation block that
controls accumulator data saturation, if selected. It
uses the result of the adder, the Overflow Status bits
described
previously
and
the
SAT<A:B>
(CORCON<7:6>) and ACCSAT (CORCON<4>) mode
control bits to determine when and to what value to
saturate.
Six STATUS register bits support saturation and
overflow:
• OA: ACCA overflowed into guard bits
• OB: ACCB overflowed into guard bits
• SA: ACCA saturated (bit 31 overflow and
saturation)
or
ACCA overflowed into guard bits and saturated
(bit 39 overflow and saturation)
• SB: ACCB saturated (bit 31 overflow and
saturation)
or
ACCB overflowed into guard bits and saturated
(bit 39 overflow and saturation)
• OAB: Logical OR of OA and OB
• SAB: Logical OR of SA and SB
The OA and OB bits are modified each time data
passes through the adder/subtracter. When set, they
indicate that the most recent operation has overflowed
into the accumulator guard bits (bits 32 through 39).
The OA and OB bits can also optionally generate an
arithmetic warning trap when set and the corresponding Overflow Trap Flag Enable bits (OVATE, OVBTE) in
the INTCON1 register are set (refer to Section 7.0
“Interrupt Controller”). This allows the user application to take immediate action, for example, to correct
system gain.
Preliminary
DS70318D-page 37
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
The SA and SB bits are modified each time data
passes through the adder/subtracter, but can only be
cleared by the user application. When set, they indicate
that the accumulator has overflowed its maximum
range (bit 31 for 32-bit saturation or bit 39 for 40-bit
saturation) and will be saturated (if saturation is
enabled). When saturation is not enabled, SA and SB
default to bit 39 overflow and thus, indicate that a catastrophic overflow has occurred. If the COVTE bit in the
INTCON1 register is set, SA and SB bits will generate
an arithmetic warning trap when saturation is disabled.
The Overflow and Saturation Status bits can optionally
be viewed in the STATUS Register (SR) as the logical
OR of OA and OB (in bit OAB) and the logical OR of SA
and SB (in bit SAB). Programmers can check one bit in
the STATUS register to determine if either accumulator
has overflowed, or one bit to determine if either
accumulator has saturated. This is useful for complex
number arithmetic, which typically uses both
accumulators.
The device supports three Saturation and Overflow
modes:
• Bit 39 Overflow and Saturation:
When bit 39 overflow and saturation occurs, the
saturation logic loads the maximally positive
9.31 (0x7FFFFFFFFF) or maximally negative
9.31 value (0x8000000000) into the target accumulator. The SA or SB bit is set and remains set until
cleared by the user application. This condition is
referred to as ‘super saturation’ and provides
protection against erroneous data or unexpected
algorithm problems (such as gain calculations).
• Bit 31 Overflow and Saturation:
When bit 31 overflow and saturation occurs, the
saturation logic then loads the maximally positive
1.31 value (0x007FFFFFFF) or maximally negative 1.31 value (0x0080000000) into the target
accumulator. The SA or SB bit is set and remains
set until cleared by the user application. When
this Saturation mode is in effect, the guard bits are
not used, so the OA, OB or OAB bits are never
set.
• Bit 39 Catastrophic Overflow:
The bit 39 Overflow Status bit from the adder is
used to set the SA or SB bit, which remains set
until cleared by the user application. No saturation
operation is performed, and the accumulator is
allowed to overflow, destroying its sign. If the
COVTE bit in the INTCON1 register is set, a
catastrophic overflow can initiate a trap exception.
3.6.3
ACCUMULATOR ‘WRITE BACK’
The MAC class of instructions (with the exception of
MPY, MPY.N, ED and EDAC) can optionally write a
rounded version of the high word (bits 31 through 16)
of the accumulator that is not targeted by the instruction
into data space memory. The write is performed across
the X bus into combined X and Y address space. The
following addressing modes are supported:
DS70318D-page 38
• W13, Register Direct:
The rounded contents of the non-target
accumulator are written into W13 as a
1.15 fraction.
• [W13] + = 2, Register Indirect with Post-Increment:
The rounded contents of the non-target
accumulator are written into the address pointed
to by W13 as a 1.15 fraction. W13 is then
incremented by 2 (for a word write).
3.6.3.1
Round Logic
The round logic is a combinational block that performs
a conventional (biased) or convergent (unbiased)
round function during an accumulator write (store). The
Round mode is determined by the state of the RND bit
in the CORCON register. It generates a 16-bit,
1.15 data value that is passed to the data space write
saturation logic. If rounding is not indicated by the
instruction, a truncated 1.15 data value is stored and
the least significant word is simply discarded.
Conventional rounding zero-extends bit 15 of the accumulator and adds it to the ACCxH word (bits 16 through
31 of the accumulator).
• If the ACCxL word (bits 0 through 15 of the
accumulator) is between 0x8000 and 0xFFFF
(0x8000 included), ACCxH is incremented.
• If ACCxL is between 0x0000 and 0x7FFF, ACCxH
is left unchanged.
A consequence of this algorithm is that over a
succession of random rounding operations, the value
tends to be biased slightly positive.
Convergent (or unbiased) rounding operates in the
same manner as conventional rounding, except when
ACCxL equals 0x8000. In this case, the Least
Significant bit (bit 16 of the accumulator) of ACCxH is
examined:
• If it is ‘1’, ACCxH is incremented.
• If it is ‘0’, ACCxH is not modified.
Assuming that bit 16 is effectively random in nature,
this scheme removes any rounding bias that may
accumulate.
The SAC and SAC.R instructions store either a
truncated (SAC), or rounded (SAC.R) version of the
contents of the target accumulator to data memory via
the X bus, subject to data saturation (see
Section 3.6.3.2 “Data Space Write Saturation”). For
the MAC class of instructions, the accumulator writeback operation functions in the same manner,
addressing combined MCU (X and Y) data space
though the X bus. For this class of instructions, the data
is always subject to rounding.
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
3.6.3.2
Data Space Write Saturation
3.6.4
BARREL SHIFTER
In addition to adder/subtracter saturation, writes to data
space can also be saturated, but without affecting the
contents of the source accumulator. The data space
write saturation logic block accepts a 16-bit, 1.15
fractional value from the round logic block as its input,
together with overflow status from the original source
(accumulator) and the 16-bit round adder. These inputs
are combined and used to select the appropriate
1.15 fractional value as output to write to data space
memory.
The barrel shifter can perform up to 16-bit arithmetic or
logic right shifts, or up to 16-bit left shifts in a single
cycle. The source can be either of the two DSP
accumulators or the X bus (to support multi-bit shifts of
register or memory data).
If the SATDW bit in the CORCON register is set, data
(after rounding or truncation) is tested for overflow and
adjusted accordingly:
The barrel shifter is 40 bits wide, thereby obtaining a
40-bit result for DSP shift operations and a 16-bit result
for MCU shift operations. Data from the X bus is
presented to the barrel shifter between bit positions 16
and 31 for right shifts, and between bit positions 0 and
16 for left shifts.
• For input data greater than 0x007FFF, data
written to memory is forced to the maximum
positive 1.15 value, 0x7FFF.
• For input data less than 0xFF8000, data written to
memory is forced to the maximum negative
1.15 value, 0x8000.
The shifter requires a signed binary value to determine
both the magnitude (number of bits) and direction of the
shift operation. A positive value shifts the operand right.
A negative value shifts the operand left. A value of ‘0’
does not modify the operand.
The Most Significant bit of the source (bit 39) is used to
determine the sign of the operand being tested.
If the SATDW bit in the CORCON register is not set, the
input data is always passed through unmodified under
all conditions.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 39
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 40
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.0
Note:
MEMORY ORGANIZATION
4.1
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 4. “Program
Memory” (DS70202), which is available
from
the
Microchip
web
site
(www.microchip.com).
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 architecture features separate program and data
memory spaces and buses. This architecture also allows
the direct access to program memory from the data
space during code execution.
FIGURE 4-1:
Program Address Space
The program address memory space of the
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices is 4M instructions. The space is
addressable by a 24-bit value derived either from the
23-bit Program Counter (PC) during program execution,
or from table operation or data space remapping as
described in Section 4.6 “Interfacing Program and
Data Memory Spaces”.
User application access to the program memory space
is restricted to the lower half of the address range
(0x000000 to 0x7FFFFF). The exception is the use of
TBLRD/TBLWT operations, which use TBLPAG<7> to
permit access to the Configuration bits and Device ID
sections of the configuration memory space.
The memory maps for the dsPIC33FJ06GS101/X02
and dsPIC33FJ16GSX02/X04 devices are shown in
Figure 4-1.
PROGRAM MEMORY MAPS FOR dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 DEVICES
dsPIC33FJ06GS101/102/202
Interrupt Vector Table
Reserved
User Memory Space
Alternate Vector Table
User Program
Flash Memory
(1792 instructions)
0x000000
0x000002
0x000004
0x0000FE
0x000100
0x000104
0x0001FE
0x000200
0x000FFE
0x001000
User Memory Space
GOTO Instruction
Reset Address
Unimplemented
(Read ‘0’s)
dsPIC33FJ16GS402/404/502/504
0x000000
GOTO Instruction
0x000002
Reset Address
0x000004
Interrupt Vector Table
0x0000FE
0x000100
Reserved
0x000104
Alternate Vector Table
0x0001FE
0x000200
User Program
Flash Memory
(5376 instructions)
0x002BFE
0x002C00
Unimplemented
(Read ‘0’s)
0x7FFFFE
0x800000
0x7FFFFE
0x800000
Device Configuration
Registers
Reserved
Configuration Memory Space
Configuration Memory Space
Reserved
0xF7FFFE
0xF80000
0xF80017
0xF80018
Reserved
DEVID (2)
Reserved
© 2009 Microchip Technology Inc.
Device Configuration
Registers
0xF7FFFE
0xF80000
0xF80017
0xF80018
Reserved
0xFEFFFE
0xFEFFFE
0xFF0000
0xFF0002
0xFFFFFE
DEVID (2)
Reserved
Preliminary
0xFF0000
0xFF0002
0xFFFFFE
DS70318D-page 41
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.1.1
PROGRAM MEMORY
ORGANIZATION
4.1.2
All dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices reserve the addresses between 0x00000
and 0x000200 for hard-coded program execution vectors.
A hardware Reset vector is provided to redirect code execution from the default value of the PC on device Reset to
the actual start of code. A GOTO instruction is
programmed by the user application at 0x000000, with
the actual address for the start of code at 0x000002.
The program memory space is organized in wordaddressable blocks. Although it is treated as 24 bits
wide, it is more appropriate to think of each address of
the program memory as a lower and upper word, with
the upper byte of the upper word being unimplemented.
The lower word always has an even address, while the
upper word has an odd address (see Figure 4-2).
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices also have two interrupt vector tables, located
from 0x000004 to 0x0000FF and 0x000100 to 0x0001FF.
These vector tables allow each of the device interrupt
sources to be handled by separate Interrupt Service
Routines (ISRs). A more detailed discussion of the
interrupt vector tables is provided in Section 7.1
“Interrupt Vector Table”.
Program memory addresses are always word-aligned
on the lower word, and addresses are incremented or
decremented by two during the code execution. This
arrangement provides compatibility with data memory
space addressing and makes data in the program
memory space accessible.
FIGURE 4-2:
msw
Address
PROGRAM MEMORY ORGANIZATION
16
8
PC Address
(lsw Address)
0
0x000000
0x000002
0x000004
0x000006
00000000
00000000
00000000
00000000
Program Memory
‘Phantom’ Byte
(read as ‘0’)
DS70318D-page 42
least significant word
most significant word
23
0x000001
0x000003
0x000005
0x000007
INTERRUPT AND TRAP VECTORS
Instruction Width
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.2
Data Address Space
The
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 CPU has a separate, 16-bitwide data memory space. The data space is accessed
using separate Address Generation Units (AGUs) for
read and write operations. The data memory maps is
shown in Figure 4-3.
All Effective Addresses (EAs) in the data memory space
are 16 bits wide and point to bytes within the data space.
This arrangement gives a data space address range of
64 Kbytes or 32K words. The lower half of the data
memory space (that is, when EA<15> = 0) is used for
implemented memory addresses, while the upper half
(EA<15> = 1) is reserved for the Program Space
Visibility area (see Section 4.6.3 “Reading Data From
Program Memory Using Program Space Visibility”).
All word accesses must be aligned to an even address.
Misaligned word data fetches are not supported, so
care must be taken when mixing byte and word
operations, or translating from 8-bit MCU code. If a
misaligned read or write is attempted, an address error
trap is generated. If the error occurred on a read, the
instruction underway is completed. If the error occurred
on a write, the instruction is executed but the write does
not occur. In either case, a trap is then executed,
allowing the system and/or user application to examine
the machine state prior to execution of the address
Fault.
All byte loads into any W register are loaded into the
Least Significant Byte. The Most Significant Byte is not
modified.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices implement up to 30 Kbytes of data
memory. Should an EA point to a location outside of
this area, an all-zero word or byte will be returned.
A sign-extend instruction (SE) is provided to allow user
applications to translate 8-bit signed data to 16-bit
signed values. Alternatively, for 16-bit unsigned data,
user applications can clear the MSB of any W register
by executing a zero-extend (ZE) instruction on the
appropriate address.
4.2.1
4.2.3
DATA SPACE WIDTH
The data memory space is organized in byte
addressable, 16-bit wide blocks. Data is aligned in data
memory and registers as 16-bit words, but all data
space EAs resolve to bytes. The Least Significant
Bytes (LSBs) of each word have even addresses, while
the Most Significant Bytes (MSBs) have odd
addresses.
4.2.2
DATA MEMORY ORGANIZATION
AND ALIGNMENT
To maintain backward compatibility with PIC® MCU
devices and improve data space memory usage
efficiency,
the
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 instruction set supports both
word and byte operations. As a consequence of byte
accessibility, all effective address calculations are
internally scaled to step through word-aligned memory.
For example, the core recognizes that Post-Modified
Register Indirect Addressing mode [Ws++] that results
in a value of Ws + 1 for byte operations and Ws + 2 for
word operations.
Data byte reads will read the complete word that
contains the byte, using the LSB of any EA to
determine which byte to select. The selected byte is
placed onto the LSB of the data path. That is, data
memory and registers are organized as two parallel
byte-wide entities with shared (word) address decode
but separate write lines. Data byte writes only write to
the corresponding side of the array or register that
matches the byte address.
© 2009 Microchip Technology Inc.
SFR SPACE
The first 2 Kbytes of the near data space, from 0x0000
to 0x07FF, is primarily occupied by Special Function
Registers (SFRs). These are used by the
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 core and peripheral modules for controlling the
operation of the device.
SFRs are distributed among the modules that they
control, and are generally grouped together by module.
Much of the SFR space contains unused addresses;
these are read as ‘0’.
Note:
4.2.4
The actual set of peripheral features and
interrupts varies by the device. Refer to
the corresponding device tables and
pinout diagrams for device-specific
information.
NEAR DATA SPACE
The 8-Kbyte area between 0x0000 and 0x1FFF is
referred to as the near data space. Locations in this
space are directly addressable via a 13-bit absolute
address field within all memory direct instructions.
Additionally, the whole data space is addressable using
MOV instructions, which support Memory Direct
Addressing mode with a 16-bit address field, or by
using Indirect Addressing mode using a working
register as an Address Pointer.
Preliminary
DS70318D-page 43
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 4-3:
DATA MEMORY MAP FOR dsPIC33FJ06GS101/102 DEVICES WITH 256 BYTES
OF RAM
MSB
Address
MSb
2-Kbyte
SFR Space
256 bytes
SRAM Space
LSB
Address
16 bits
LSb
0x0000
0x0001
SFR Space
0x07FF
0x0801
0x087F
0x0881
X Data RAM (X)
Y Data RAM (Y)
0x087E
0x0880
0x08FF
0x0901
0x08FE
0x0900
0x1FFF
0x2001
0x1FFE
0x8001
0x8000
8-Kbyte
Near Data
Space
0x2000
X Data
Unimplemented (X)
Optionally
Mapped
into Program
Memory
0xFFFF
DS70318D-page 44
0x07FE
0x0800
0xFFFE
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 4-4:
DATA MEMORY MAP FOR dsPIC33FJ06GS202 DEVICE WITH 1-Kbyte RAM
MSB
Address
MSb
2-Kbyte
SFR Space
1-Kbyte
SRAM Space
LSB
Address
16 bits
LSb
0x0000
0x0001
SFR Space
0x07FF
0x0801
0x09FF
0x0A01
X Data RAM (X)
Y Data RAM (Y)
0x09FE
0x0A00
0x0BFF
0x0C01
0x0BFE
0x0C00
0x1FFF
0x2001
0x1FFE
0x8001
0x8000
8-Kbyte
Near Data
Space
0x2000
X Data
Unimplemented (X)
Optionally
Mapped
into Program
Memory
0xFFFF
© 2009 Microchip Technology Inc.
0x07FE
0x0800
0xFFFE
Preliminary
DS70318D-page 45
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 4-5:
DATA MEMORY MAP FOR dsPIC33FJ16GS402/404/502/504 DEVICES WITH
2-Kbyte RAM
MSB
Address
MSb
2-Kbyte
SFR Space
2-Kbyte
SRAM Space
LSB
Address
16 bits
LSb
0x0000
0x0001
SFR Space
0x07FF
0x0801
0x0BFF
0x0C01
X Data RAM (X)
Y Data RAM (Y)
0x0BFE
0x0C00
0x0FFF
0x1001
0x0FFE
0x1000
0x1FFF
0x2001
0x1FFE
0x8001
0x8000
8-Kbyte
Near Data
Space
0x2000
X Data
Unimplemented (X)
Optionally
Mapped
into Program
Memory
0xFFFF
DS70318D-page 46
0x07FE
0x0800
0xFFFE
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.2.5
X AND Y DATA SPACES
The core has two data spaces, X and Y. These data
spaces can be considered either separate (for some
DSP instructions), or as one unified linear address
range (for MCU instructions). The data spaces are
accessed using two Address Generation Units (AGUs)
and separate data paths. This feature allows certain
instructions to concurrently fetch two words from RAM,
thereby enabling efficient execution of DSP algorithms,
such as Finite Impulse Response (FIR) filtering and
Fast Fourier Transform (FFT).
The X data space is used by all instructions and
supports all addressing modes. X data space has
separate read and write data buses. The X read data
bus is the read data path for all instructions that view
data space as combined X and Y address space. It is
also the X data prefetch path for the dual operand DSP
instructions (MAC class).
© 2009 Microchip Technology Inc.
The Y data space is used in concert with the X data
space by the MAC class of instructions (CLR, ED,
EDAC, MAC, MOVSAC, MPY, MPY.N and MSC) to
provide two concurrent data read paths.
Both the X and Y data spaces support Modulo
Addressing mode for all instructions, subject to
addressing mode restrictions. Bit-Reversed Addressing
mode is only supported for writes to X data space.
All data memory writes, including in DSP instructions,
view data space as combined X and Y address space.
The boundary between the X and Y data spaces is
device-dependent and is not user-programmable.
All effective addresses are 16 bits wide and point to
bytes within the data space. Therefore, the data space
address range is 64 Kbytes, or 32K words, though the
implemented memory locations vary by device.
Preliminary
DS70318D-page 47
DS70318D-page 48
001C
001E
0020
WREG14
WREG15
SPLIM
Preliminary
0034
PSVPAG
0040
0042
0044
0046
DOENDH
SR
CORCON
MODCON
XMODEN
—
OA
—
—
—
—
—
ACCB<39>
YMODEN
—
OB
—
—
—
—
—
—
—
SA
—
—
—
—
—
—
US
SB
—
—
—
—
—
EDT
OAB
—
—
—
—
—
ACCB<39> ACCB<39> ACCB<39> ACCB<39>
ACCB<39> ACCB<39>
ACCBH
ACCBL
ACCA<39> ACCA<39>
—
—
—
—
—
—
—
BWM<3:0>
DL<2:0>
DA
—
DOENDL<15:1>
SAB
—
—
DOSTARTL<15:1>
DCOUNT<15:0>
DC
—
—
Repeat Loop Counter Register
—
—
—
Program Counter Low Word Register
ACCB<39>
ACCA<39>
ACCAH
Working Register 15
Working Register 14
Working Register 13
Working Register 12
Working Register 11
Working Register 10
Working Register 9
Working Register 8
Working Register 7
Working Register 6
Working Register 5
Working Register 4
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
003E
DOENDL
Legend:
003A
003C
DOSTARTL
DOSTARTH
0038
0032
TBLPAG
DCOUNT
0030
PCH
0036
002E
PCL
RCOUNT
002A
002C
ACCBH
ACCBU
ACCA<39> ACCA<39> ACCA<39> ACCA<39>
001A
WREG13
ACCA<39>
0018
WREG12
0028
0016
WREG11
0026
0014
WREG10
ACCBL
0012
WREG9
ACCAU
ACCAL
0010
WREG8
0022
000E
WREG7
0024
000C
WREG6
ACCAL
000A
WREG5
ACCAH
Stack Pointer Limit Register
0008
WREG4
Working Register 3
Working Register 2
Working Register 1
Working Register 0
0006
Bit 8
WREG3
Bit 9
0004
Bit 10
WREG2
Bit 11
0002
Bit 12
0000
Bit 13
WREG1
Bit 14
WREG0
Bit 15
SFR Name
CPU CORE REGISTER MAP
SFR
Addr
TABLE 4-1:
SATA
IPL2
—
—
Bit 7
ACCBU
ACCAU
Bit 4
Bit 3
Bit 2
Table Page Address Pointer Register
Program Counter High Byte Register
Bit 5
Bit 1
SATD
W
IPL0
YWM<3:0>
SATB
IPL1
—
—
ACCSAT
RA
IPL3
N
OV
RND
Z
XWM<3:0>
PSV
DOENDH
DOSTARTH<5:0>
Program Memory Visibility Page Address Pointer Register
Bit 6
IF
C
0
0
Bit 0
0000
0020
0000
00xx
xxxx
00xx
xxxx
xxxx
xxxx
0000
0000
0000
0000
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
0800
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
© 2009 Microchip Technology Inc.
—
XB<14:0>
0060
0068
CNEN1
CNPU1
—
—
—
—
Bit 14
Bit 15
—
—
Bit 13
—
—
Bit 12
—
—
Bit 11
—
—
Bit 10
—
—
Bit 9
—
—
Bit 8
CN7PUE
CN7IE
Bit 7
Preliminary
CN13IE
CN12IE
CN11IE
CN10IE
Bit 10
CN9IE
Bit 9
CN8IE
Bit 8
CN7IE
Bit 7
—
CN4PUE
CN3PUE
CN3IE
Bit 3
Bit 4
CN2PUE
CN2IE
Bit 2
Bit 3
Bit 0
CN6IE
Bit 6
CN5PUE
CN5IE
Bit 5
CN4PUE
CN4IE
Bit 4
CN3PUE
CN3IE
Bit 3
CN25IE
CN8PUE
CN24IE
CN8IE
Bit 8
CN7PUE
CN23IE
CN7IE
Bit 7
CN6PUE
CN22IE
CN6IE
Bit 6
CN5PUE
CN21IE
CN5IE
Bit 5
CN4PUE
CN20IE
CN4IE
Bit 4
CN3PUE
CN19IE
CN3IE
Bit 3
CN2PUE
CN18IE
CN2IE
Bit 2
CN2PUE
CN2IE
Bit 2
CN1PUE
CN17IE
CN1IE
Bit 1
CN1PUE
CN1IE
Bit 1
1
0
1
0
Bit 0
CN0PUE
CN0IE
Bit 1
CN1PUE
CN1IE
Bit 1
Bit 2
CN0PUE
CN16IE
CN0IE
Bit 0
CN0PUE
CN0IE
Bit 0
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
All
Resets
0000
0000
0000
0000
All
Resets
0000
0000
All
Resets
0000
0000
All
Resets
CN29PUE CN28PUE CN27PUE CN26PUE CN25PUE CN24PUE CN23PUE CN22PUE CN21PUE CN20PUE CN19PUE CN18PUE CN17PUE CN16PUE
CN26IE
CN9IE
Bit 9
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
CN27IE
CN10IE
Bit 10
006A
CN28IE
CN11IE
Bit 11
CNPU2
CN29IE
CN12IE
Bit 12
0068 CN15PUE CN14PUE CN13PUE CN12PUE CN11PUE CN10PUE CN9PUE
—
CN13IE
Bit 13
CNPU1
—
CN14IE
Bit 14
0062
Bit 15
0060 CN15IE
Legend:
Bit 5
CN4IE
Bit 4
Bit 6
CHANGE NOTIFICATION REGISTER MAP FOR dsPIC33FJ16GS404 AND dsPIC33FJ16GS504
CNEN2
SFR
Addr
CNEN1
File
Name
CN14IE
Bit 11
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
CN15IE
Bit 12
0068 CN15PUE CN14PUE CN13PUE CN12PUE CN11PUE CN10PUE CN9PUE CN8PUE CN7PUE CN6PUE
Bit 13
0060
Bit 14
CNPU1
Bit 15
CNEN1
TABLE 4-4:
CN5IE
Bit 5
CN5PUE
SFR
Addr
Legend:
Bit 7
CHANGE NOTIFICATION REGISTER MAP FOR dsPIC33FJ06GS102, dsPIC33FJ06GS202, dsPIC33FJ16GS402 AND
dsPIC33FJ16GS502
CN6PUE
CN6IE
Bit 6
CHANGE NOTIFICATION REGISTER MAP FOR dsPIC33FJ06GS101
File
Name
TABLE 4-3:
Bit 8
Disable Interrupts Counter Register
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
SFR
Addr
File Name
TABLE 4-2:
Legend:
—
BREN
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
0052
Legend:
0050
XBREV
DISICNT
YS<15:1>
YE<15:1>
004E
XS<15:1>
Bit 9
004C
Bit 10
YMODSRT
Bit 11
YMODEND
Bit 12
XE<15:1>
Bit 13
0048
Bit 14
004A
Bit 15
XMODSRT
SFR
Addr
CPU CORE REGISTER MAP (CONTINUED)
XMODEND
SFR Name
TABLE 4-1:
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318D-page 49
DS70318D-page 50
Preliminary
009E
00A0 ADCP1IE
00A2
00A4
00A6
00A8
00AA
00AC
00AE
00B2
00C0
00C4
00D2
00D4
00DA
00DC
00E0
IEC5
IEC6
IEC7
IPC0
IPC1
IPC2
IPC3
IPC4
IPC5
IPC7
IPC14
IPC16
IPC23
IPC24
IPC27
IPC28
INTTREG
Legend:
009C
IEC4
—
—
—
—
Bit 12
Bit 11
Bit 10
—
—
ADCP1IP<2:0>
—
—
—
—
—
—
CNIP<2:0>
—
U1RXIP<2:0>
T2IP<2:0>
T1IP<2:0>
—
—
—
—
—
—
INT2IE
ADIE
—
—
—
—
—
INT2IF
ADIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1TXIE
—
—
—
—
—
—
U1TXIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1RXIE
—
—
—
—
—
—
U1RXIF
—
—
ADCP0IP<2:0>
—
PWM1IP<2:0>
—
—
—
—
—
—
Bit 8
Bit 7
Bit 6
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
-—
—
—
—
—
—
—
—
—
—
—
T2IE
—
—
—
—
—
—
T2IF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 5
—
—
—
—
—
—
INT1IF
—
—
—
—
—
—
—
—
—
—
—
—
—
INT1IE
ADCP3IP<2:0>
—
PWM4IP<2:0>
—
U1EIP<2:0>
PSEMIP<2:0>
INT2IP<2:0>
—
MI2C1IP<2:0>
ADIP<2:0>
Bit 4
Bit 3
Bit 2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
OC1IE
—
—
—
—
—
—
OC1IF
INT2EP
STKERR
VECNUM<6:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CNIE
T1IE
—
—
—
—
—
CNIF
T1IF
—
MATHERR ADDRERR
SPI1EIP<2:0>
COVTE SFTACERR DIV0ERR
SPI1IP<2:0>
—
OC1IP<2:0>
—
—
—
—
PSEMIE
—
—
SPI1EIE
—
—
—
—
PSEMIF
—
SPI1EIF
—
OVBTE
Bit 9
ILR<3:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SPI1IE
—
—
—
—
—
—
SPI1IF
—
OVBERR COVAERR COVBERR OVATE
Bit 13
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
—
—
—
—
—
—
—
—
—
—
—
—
ADCP0IE
PWM1IE
—
—
—
—
—
—
ADCP0IF
PWM1IF
—
—
—
—
DISI
OVAERR
Bit 14
—
—
—
—
—
—
—
—
—
—
—
—
—
—
009A
IEC0
—
IEC3
0094
IFS7
ADCP1IF
0096
0092
IFS6
—
0098
0090
IFS5
—
—
IEC1
008E
IFS4
—
—
ALTIVT
NSTDIS
Bit 15
INTERRUPT CONTROLLER REGISTER MAP FOR dsPIC33FJ06GS101 DEVICES ONLY
IEC2
008A
008C
IFS3
0084
0086
IFS0
IFS1
0080
0082
INTCON1
INTCON2
SFR
Addr.
File
Name
TABLE 4-5:
—
—
—
—
—
—
—
INT1IP<2:0>
SI2C1IP<2:0>
U1TXIP<2:0>
—
—
INT0IP<2:0>
ADCP3IE
PWM4IE
—
U1EIE
—
—
MI2C1IE
—
ADCP3IF
PWM4IF
—
U1EIF
—
MI2C1IF
—
INT1EP
OSCFAIL
Bit 1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SI2C1IE
INT0IE
—
—
—
—
—
SI2C1IF
INT0IF
INT0EP
—
Bit 0
0000
0000
0040
4400
0040
0400
0040
0040
0004
4044
0044
4440
4000
4404
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
© 2009 Microchip Technology Inc.
Preliminary
0094
0096
009A
009C
009E PWM2IE
00A0 ADCP1IE ADCP0IE
—
0092
00A2
00A4
00A6
00A8
00AA
00AC
00AE
00B2
00C0
00C4
00D2
00DA
00DC
IFS5
IFS6
IFS7
IEC0
IEC1
IEC3
IEC4
IEC5
IEC6
IEC7
IPC0
IPC1
IPC2
IPC3
IPC4
IPC5
IPC7
IPC14
IPC16
IPC23
IPC27
IPC28
INTTREG 00E0
Legend:
008E
0090 ADCP1IF ADCP0IF
—
008C
IFS4
—
—
Bit 11
Bit 10
PWM2IP<2:0>
—
—
—
—
CNIP<2:0>
—
U1RXIP<2:0>
T2IP<2:0>
T1IP<2:0>
—
—
—
—
—
INT2IE
ADIE
—
—
—
—
—
INT2IF
ADIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1TXIE
—
—
—
—
—
—
U1TXIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1RXIE
—
—
—
—
—
—
U1RXIF
—
ADCP0IP<2:0>
—
Bit 8
Bit 7
Bit 6
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
-—
—
—
—
—
—
—
—
—
—
T2IE
—
—
—
—
—
—
T2IF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
COVTE SFTACERR DIV0ERR
PWM1IP<2:0>
—
—
—
—
—
—
SPI1IP<2:0>
—
OC1IP<2:0>
—
—
—
—
PSEMIE
—
SPI1EIE
—
—
—
—
PSEMIF
—
SPI1EIF
—
OVBTE
ILR<3:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SPI1IE
—
—
—
—
—
—
SPI1IF
—
Bit 9
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
—
—
—
—
—
—
—
—
—
PWM1IE
—
—
—
—
—
PWM1IF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
PWM2IF
—
—
Bit 12
OVBERR COVAERR COVBERR OVATE
Bit 13
ADCP1IP<2:0>
008A
—
—
IFS3
—
—
DISI
OVAERR
0084
ALTIVT
NSTDIS
0086
0082
INTCON2
Bit 14
IFS0
0080
INTCON1
Bit 15
—
—
—
U1EIP<2:0>
PSEMIP<2:0>
INT2IP<2:0>
—
MI2C1IP<2:0>
ADIP<2:0>
Bit 4
Bit 3
—
—
—
—
—
—
—
—
—
—
—
INT1IE
—
—
—
—
—
—
INT1IF
—
—
Bit 2
—
—
—
—
—
—
—
—
—
—
—
—
—
OC1IE
—
—
—
—
—
—
OC1IF
INT2EP
—
—
—
—
—
INT1IP<2:0>
SI2C1IP<2:0>
U1TXIP<2:0>
—
—
INT0IP<2:0>
—
—
—
U1EIE
—
MI2C1IE
—
—
—
—
U1EIF
—
MI2C1IF
—
INT1EP
OSCFAIL
Bit 1
—
—
—
—
SI2C1IE
INT0IE
ADCP2IF
—
—
—
—
SI2C1IF
INT0IF
INT0EP
—
Bit 0
—
—
—
—
—
—
—
ADCP2IE
ADCP2IP<2:0>
STKERR
VECNUM<6:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CNIE
T1IE
—
—
—
—
—
CNIF
T1IF
—
MATHERR ADDRERR
SPI1EIP<2:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 5
INTERRUPT CONTROLLER REGISTER MAP FOR dsPIC33FJ06GS102 DEVICES ONLY
IFS1
SFR
Addr.
File
Name
TABLE 4-6:
0000
0004
4400
4400
0040
0040
0040
0004
4044
0044
4440
4000
4404
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318D-page 51
DS70318D-page 52
008E
0090 ADCP1IF ADCP0IF
0092
0094
0096
IFS6
IFS7
IEC0
IEC1
009E
00A0 ADCP1IE ADCP0IE
00A2
00A4
00A6
IEC6
IEC7
IPC0
IPC1
Preliminary
—
00AE
00B2
00C0
00C4
00D2
00D6
00DA
00DC
00DE
IPC5
IPC7
IPC14
IPC16
IPC23
IPC25
IPC27
IPC28
IPC29
INTTREG 00E0
Legend:
—
00AC
IPC4
—
—
—
—
—
—
ADCP1IP<2:0>
AC2IP<2:0>
PWM2IP<2:0>
—
—
—
—
CNIP<2:0>
—
Bit 12
Bit 11
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1TXIE
—
—
—
—
—
—
U1TXIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1RXIE
—
—
—
—
—
—
U1RXIF
—
COVAERR COVBERR
U1RXIP<2:0>
T2IP<2:0>
T1IP<2:0>
—
—
—
—
—
INT2IE
ADIE
—
—
—
—
—
INT2IF
ADIF
—
OVBERR
Bit 13
—
—
ADCP0IP<2:0>
—
Bit 8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
COVTE
PWM1IP<2:0>
—
—
—
—
AC1IP<2:0>
—
SPI1IP<2:0>
—
OC1IP<2:0>
—
—
—
—
PSEMIE
—
SPI1EIE
—
—
—
—
PSEMIF
—
SPI1EIF
—
OVBTE
Bit 9
ILR<3:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SPI1IE
—
—
—
—
—
—
SPI1IF
—
OVATE
Bit 10
Bit 6
—
—
—
—
—
—
—
—
—
—
—
-—
—
—
—
—
AC2IE
—
—
—
—
T2IE
—
AC2IF
—
—
—
—
T2IF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1EIP<2:0>
PSEMIP<2:0>
—
—
—
—
—
—
—
—
—
INT1IE
—
—
—
—
—
—
—
ADCP6IE
INT2IP<2:0>
—
—
—
—
—
INT1IF
—
—
ADCP6IF
MI2C1IP<2:0>
ADIP<2:0>
—
Bit 4
Bit 3
Bit 2
—
—
—
—
—
—
—
—
—
—
—
—
—
AC1IE
OC1IE
—
—
—
—
—
AC1IF
OC1IF
INT2EP
—
—
—
—
—
—
INT1IP<2:0>
SI2C1IP<2:0>
U1TXIP<2:0>
—
—
INT0IP<2:0>
—
—
—
U1EIE
—
MI2C1IE
IC1IE
—
—
—
U1EIF
—
MI2C1IF
IC1IF
INT1EP
OSCFAIL
Bit 1
—
—
—
—
SI2C1IE
INT0IE
ADCP2IF
—
—
—
—
SI2C1IF
INT0IF
INT0EP
—
Bit 0
ADCP6IP<2:0>
—
—
—
—
—
—
—
—
ADCP2IE
ADCP2IP<2:0>
STKERR
VECNUM<6:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CNIE
T1IE
—
—
—
—
—
CNIF
T1IF
—
MATHERR ADDRERR
IC1IP<2:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 5
SPI1EIP<2:0>
SFTACERR DIV0ERR
Bit 7
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
—
—
—
—
—
—
—
—
—
—
—
PWM1IE
—
—
—
—
IPC3
—
00A8
00AA
IPC2
—
—
—
PWM2IE
—
—
IEC5
—
—
009A
009C
IEC4
—
—
—
PWM1IF
IEC3
—
—
—
PWM2IF
—
—
—
IFS5
—
—
—
—
008A
IFS1
—
DISI
OVAERR
008C
0086
IFS0
ALTIVT
NSTDIS
Bit 14
IFS4
0084
INTCON2
Bit 15
INTERRUPT CONTROLLER REGISTER MAP FOR dsPIC33FJ06G202 DEVICES ONLY
IFS3
0080
0082
INTCON1
SFR
Addr.
File
Name
TABLE 4-7:
0000
0004
0004
4400
4000
4400
0040
0040
0040
0004
4444
0044
4440
4000
4444
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
© 2009 Microchip Technology Inc.
Preliminary
Legend:
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
PWM1IE
—
—
—
—
—
—
—
—
PWM2IE
Bit 12
Bit 11
Bit 10
Bit 9
—
—
ADCP1IP<2:0>
—
PWM2IP<2:0>
—
—
—
—
CNIP<2:0>
—
U1RXIP<2:0>
T2IP<2:0>
T1IP<2:0>
—
—
—
—
—
INT2IE
ADIE
—
—
—
—
—
INT2IF
ADIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1TXIE
—
—
—
—
—
—
U1TXIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1RXIE
—
—
—
—
—
—
U1RXIF
—
—
—
—
—
—
PSEMIF
—
—
OC2IP<2:0>
SPI1IP<2:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
T3IE
—
—
—
—
—
—
T3IF
ADCP0IP<2:0>
—
PWM1IP<2:0>
—
—
—
—
—
—
Bit 8
Bit 7
Bit 6
—
—
-—
—
-—
—
—
—
—
—
-—
—
—
—
—
—
—
—
—
—
T2IE
—
—
—
—
—
—
T2IF
—
—
—
—
—
—
—
—
—
OC2IE
—
—
—
—
—
—
OC2IF
—
—
—
—
U1EIP<2:0>
PSEMIP<2:0>
INT2IP<2:0>
—
MI2C1IP<2:0>
ADIP<2:0>
Bit 4
Bit 3
—
—
—
—
—
—
—
INT1IE
—
—
—
—
—
—
INT1IF
—
—
Bit 2
—
—
—
—
—
—
—
—
—
—
—
—
OC1IE
—
—
—
—
—
—
OC1IF
INT2EP
—
PWM3IP<2:0>
—
—
—
—
INT1IP<2:0>
SI2C1IP<2:0>
U1TXIP<2:0>
T3IP<2:0>
—
INT0IP<2:0>
ADCP3IE
—
—
U1EIE
—
MI2C1IE
IC1IE
ADCP3IF
—
—
U1EIF
—
MI2C1IF
IC1IF
INT1EP
OSCFAIL
Bit 1
PWM3IE
—
—
—
SI2C1IE
INT0IE
ADCP2IF
PWM3IF
—
—
—
SI2C1IF
INT0IF
INT0EP
—
Bit 0
—
—
—
—
—
—
ADCP2IE
ADCP2IP<2:0>
STKERR
VECNUM<6:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CNIE
T1IE
—
—
—
—
—
CNIF
T1IF
—
MATHERR ADDRERR
SPI1EIP<2:0>
IC2IP<2:0>
IC1IP<2:0>
—
—
—
—
—
—
IC2IE
—
—
—
—
—
—
IC2IF
—
—
Bit 5
ADCP3IP<2:0>
COVTE SFTACERR DIV0ERR
OC1IP<2:0>
—
—
—
—
PSEMIE
ILR<3:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SPI1IE SPI1EIE
—
—
—
—
—
—
SPI1IF SPI1EIF
—
OVBERR COVAERR COVBERR OVATE OVBTE
Bit 13
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
00E0
00D4
IPC24
INTTREG
00D2
IPC23
00DA
00C4
IPC16
00DC
00C0
IPC14
IPC28
00B2
IPC7
IPC27
00AE
00A8
IPC2
IPC5
00A6
IPC1
00AA
00A4
IPC0
00AC
00A2
IEC7
IPC4
00A0 ADCP1IE ADCP0IE
IEC6
IPC3
009E
—
—
IEC5
—
—
009A
—
009C
—
—
—
PWM1IF
IEC4
0096
IEC1
—
—
PWM2IF
IEC3
0092
0094
IEC0
0090 ADCP1IF ADCP0IF
IFS6
IFS7
008E
—
—
—
—
IFS5
—
—
—
—
008A
IFS1
DISI
OVAERR
008C
0086
IFS0
ALTIVT
NSTDIS
Bit 14
IFS4
0084
INTCON2
Bit 15
INTERRUPT CONTROLLER REGISTER MAP FOR dsPIC33FJ16GS402/404 DEVICES ONLY
IFS3
0080
0082
INTCON1
SFR
Addr.
File
Name
TABLE 4-8:
0000
0044
4400
0004
4400
0040
0040
0040
0004
4044
0044
4444
4440
4444
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318D-page 53
0084
0086
008A
008C
008E
0090 ADCP1IF ADCP0IF
IFS1
DS70318D-page 54
IFS3
IFS4
IFS5
IFS6
Preliminary
—
Legend:
—
00DE
—
—
—
—
—
—
Bit 12
Bit 11
Bit 10
—
—
—
ADCP1IP<2:0>
—
AC2IP<2:0>
—
PWM2IP<2:0>
—
—
—
—
CNIP<2:0>
—
U1RXIP<2:0>
T2IP<2:0>
T1IP<2:0>
—
—
—
—
—
INT2IE
ADIE
—
—
—
—
—
INT2IF
ADIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1TXIE
—
—
—
—
—
—
U1TXIF
—
—
—
—
—
—
—
—
—
—
—
—
—
-—
—
—
—
—
—
—
—
—
—
U1RXIE
—
—
—
—
—
—
U1RXIF
—
Bit 8
Bit 7
Bit 6
—
—
—
—
—
—
—
T3IE
—
—
—
—
—
—
—
—
—
—
AC3IE
ADCP0IP<2:0>
—
—
—
—
—
—
—
T3IF
—
AC3IF
PWM1IP<2:0>
—
—
—
—
AC1IP<2:0>
—
SPI1IP<2:0>
OC2IP<2:0>
OC1IP<2:0>
—
AC4IE
—
—
PSEMIE
—
SPI1EIE
—
AC4IF
—
—
PSEMIF
—
SPI1EIF
—
—
—
—
-—
—
—
—
—
—
—
—
—
—
-—
—
—
—
—
AC2IE
—
—
—
—
T2IE
—
AC2IF
—
—
—
—
T2IF
—
—
—
—
—
—
—
—
—
—
—
OC2IE
—
—
—
—
—
—
OC2IF
—
—
U1EIP<2:0>
—
—
ADCP3IP<2:0>
—
AC4IP<2:0>
—
—
—
—
INT1IE
—
—
—
—
—
ADCP6IE
PSEMIP<2:0>
INT2IP<2:0>
—
—
—
—
—
INT1IF
—
—
ADCP6IF
MI2C1IP<2:0>
ADIP<2:0>
Bit 4
Bit 3
Bit 2
—
—
—
—
—
—
—
—
—
—
—
—
AC1IE
OC1IE
—
—
—
—
—
AC1IF
OC1IF
INT2EP
—
AC3IP<2:0>
—
PWM3IP<2:0>
—
—
—
—
INT1IP<2:0>
SI2C1IP<2:0>
U1TXIP<2:0>
T3IP<2:0>
—
INT0IP<2:0>
ADCP3IE
PWM4IE
—
U1EIE
—
MI2C1IE
IC1IE
ADCP3IF
PWM4IF
—
U1EIF
—
MI2C1IF
IC1IF
INT1EP
OSCFAIL
Bit 1
PWM3IF
—
—
—
SI2C1IF
INT0IF
INT0EP
—
Bit 0
ADCP6IP<2:0>
—
—
—
—
—
—
—
ADCP2IE
PWM3IE
—
—
—
SI2C1IE
INT0IE
ADCP2IF
ADCP2IP<2:0>
STKERR
VECNUM<6:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
-—
—
—
—
—
—
—
CNIE
T1IE
—
—
—
—
—
CNIF
T1IF
—
MATHERR ADDRERR
SPI1EIP<2:0>
IC2IP<2:0>
IC1IP<2:0>
—
—
—
—
—
—
IC2IE
—
—
—
—
—
—
IC2IF
—
—
Bit 5
PWM4IP<2:0>
OVBTE COVTE SFTACERR DIV0ERR
Bit 9
ILR<3:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SPI1IE
—
—
—
—
—
—
SPI1IF
—
OVBERR COVAERR COVBERR OVATE
Bit 13
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
—
—
—
INTTREG 00E0
00D8
IPC26
IPC29
00D6
IPC25
—
00DA
00D4
IPC24
—
00DC
00D2
IPC23
—
—
—
IPC28
00C4
IPC16
—
—
—
—
PWM1IE
—
—
—
—
—
—
—
—
—
—
—
PWM2IE
—
—
—
IPC27
00C0
IPC14
00A8
IPC2
00B2
00A6
IPC1
IPC7
00A4
IPC0
00AE
00A2
IEC7
IPC5
00A0 ADCP1IE ADCP0IE
IEC6
00AA
009E
IEC5
00AC
009C
IEC4
IPC4
009A
IEC3
IPC3
0096
—
—
IEC1
—
—
0092
0094
IEC0
PWM1IF
—
—
—
—
IFS7
PWM2IF
—
—
—
—
DISI
OVAERR
IFS0
ALTIVT
NSTDIS
0080
0082
Bit 14
INTCON2
Bit 15
INTERRUPT CONTROLLER REGISTER MAP FOR dsPIC33FJ16GS502 DEVICES ONLY
INTCON1
SFR
Addr.
File
Name
TABLE 4-9:
0000
0004
0044
4400
0044
4000
0044
4400
0040
0040
0040
0004
4444
0044
4444
4440
4444
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
008A
008C
008E
0090 ADCP1IF ADCP0IF
0092
IFS4
IFS5
IFS6
IFS7
© 2009 Microchip Technology Inc.
Preliminary
00D8
IPC25
IPC26
Legend:
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
PWM1IE
—
—
—
—
—
—
—
—
—
—
PWM2IE
—
—
Bit 12
Bit 11
—
—
ADCP5IP<2:0>
ADCP1IP<2:0>
—
AC2IP<2:0>
—
PWM2IP<2:0>
—
—
—
—
CNIP<2:0>
—
U1RXIP<2:0>
T2IP<2:0>
T1IP<2:0>
—
—
—
—
—
INT2IE
ADIE
—
—
—
—
—
INT2IF
ADIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1TXIE
—
—
—
—
—
—
U1TXIF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U1RXIE
—
—
—
—
—
—
U1RXIF
—
OVBERR COVAERR COVBERR
Bit 13
—
—
—
—
T3IE
—
—
—
—
—
—
—
—
—
—
—
AC3IE
ADCP4IP<2:0>
—
—
—
—
—
T3IF
—
AC3IF
ADCP0IP<2:0>
—
—
—
Bit 8
Bit 7
Bit 6
—
—
—
—
—
—
—
—
—
—
—
—
—
-—
—
—
—
—
AC2IE
—
—
—
—
T2IE
—
AC2IF
—
—
—
—
T2IF
—
—
—
—
—
—
—
—
—
—
—
—
OC2IE
—
—
—
—
—
—
OC2IF
—
IC2IP<2:0>
ADIP<2:0>
PSEMIP<2:0>
—
ADCP3IP<2:0>
—
AC4IP<2:0>
—
PWM4IP<2:0>
—
—
—
—
—
—
INT1IE
—
—
—
—
—
ADCP6IE
INT2IP<2:0>
U1EIP<2:0>
—
—
—
—
INT1IF
—
—
ADCP6IF
MI2C1IP<2:0>
—
Bit 4
Bit 3
Bit 2
—
—
—
—
—
—
—
—
—
—
—
INT1IP<2:0>
SI2C1IP<2:0>
U1TXIP<2:0>
T3IP<2:0>
—
INT0IP<2:0>
ADCP3IE
PWM4IE
—
U1EIE
—
MI2C1IE
IC1IE
ADCP3IF
PWM4IF
—
U1EIF
—
MI2C1IF
IC1IF
INT1EP
OSCFAIL
Bit 1
PWM3IE
—
—
—
SI2C1IE
INT0IE
ADCP2IF
PWM3IF
—
—
—
SI2C1IF
INT0IF
INT0EP
—
Bit 0
ADCP6IP<2:0>
—
—
—
—
—
—
—
ADCP2IE
ADCP2IP<2:0>
—
AC3IP<2:0>
—
PWM3IP<2:0>
ADCP4IE
—
—
—
—
AC1IE
OC1IE
ADCP4IF
—
—
—
—
AC1IF
OC1IF
INT2EP
STKERR
VECNUM<6:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
ADCP5IE
—
—
—
—
CNIE
T1IE
ADCP5IF
—
—
—
—
CNIF
T1IF
—
MATHERR ADDRERR
IC1IP<2:0>
—
—
—
—
—
—
IC2IE
—
—
—
—
—
—
IC2IF
—
—
Bit 5
SPI1EIP<2:0>
COVTE SFTACERR DIV0ERR
PWM1IP<2:0>
—
—
—
—
AC1IP<2:0>
—
SPI1IP<2:0>
OC2IP<2:0>
OC1IP<2:0>
—
AC4IE
—
—
PSEMIE
—
SPI1EIE
—
AC4IF
—
—
PSEMIF
—
SPI1EIF
—
OVBTE
Bit 9
ILR<3:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SPI1IE
—
—
—
—
—
—
SPI1IF
—
OVATE
Bit 10
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
00E0
00D6
IPC24
00DE
00D4
IPC23
INTTREG
00D2
IPC16
IPC29
00C4
IPC14
00DA
00C0
IPC7
00DC
00B2
IPC5
IPC28
00AE
IPC4
IPC27
00AA
00AC
IPC3
00A8
IPC2
00A2
IEC7
00A4
00A0 ADCP1IE ADCP0IE
IEC6
00A6
009E
IEC5
IPC0
009C
IEC4
IPC1
009A
—
—
IEC3
—
—
0094
0096
IEC0
—
PWM1IF
—
—
IEC1
—
PWM2IF
—
—
—
—
IFS3
—
—
0084
0086
DISI
OVAERR
Bit 14
IFS0
ALTIVT
NSTDIS
Bit 15
INTERRUPT CONTROLLER REGISTER MAP FOR dsPIC33FJ16GS504 DEVICES ONLY
IFS1
0080
0082
INTCON1
INTCON2
SFR
Addr.
File
Name
TABLE 4-10:
0000
0004
4444
4400
0440
4000
0044
4400
0040
0040
0040
0004
4444
0044
4444
4440
4444
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318D-page 55
DS70318D-page 56
—
—
—
—
—
Preliminary
TGATE
—
—
—
—
—
—
—
—
ICSIDL
—
—
—
Bit 10
—
Bit 8
Bit 7
—
ICTMR
Input Capture 1 Register
Bit 9
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
Bit 11
Legend:
—
Bit 12
0140
Bit 13
0142
Bit 14
IC1CON
Bit 15
—
—
Period Register 3
Period Register 2
Timer3 Register
INPUT CAPTURE REGISTER MAP FOR dsPIC33FJ06GS202
TSIDL
TGATE
Bit 6
ICOV
Bit 4
TCKPS<1:0>
TCKPS<1:0>
Bit 3
—
T32
—
Bit 3
—
—
Bit 3
ICBNE
Bit 4
TCKPS<1:0>
Bit 5
TCKPS<1:0>
Bit 5
ICI<1:0>
Bit 6
TGATE
TGATE
Bit 4
TCKPS<1:0>
Bit 5
Timer3 Holding Register (for 32-bit timer operations only)
IC1BUF
SFR
Addr
SFR
Name
TON
—
0112
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
Legend:
—
T3CON
TSIDL
0110
—
010E
—
Timer2 Register
T2CON
—
PR3
TON
Bit 7
Period Register 1
010C
TABLE 4-13:
—
Timer1 Register
Bit 8
PR2
—
Bit 9
010A
—
Bit 10
TMR3
—
Bit 11
0108
—
Bit 12
TMR3HLD
TSIDL
Bit 13
0104
—
Bit 14
0106
TON
Bit 15
TMR2
0102
TSIDL
TGATE
Bit 6
TIMER REGISTER MAP FOR dsPIC33FJ16GSX02 AND dsPIC33FJ16GSX04
—
Period Register 2
T1CON
0100
PR1
SFR
Addr
TMR1
SFR
Name
TABLE 4-12:
TON
—
Timer2 Register
0110
—
Period Register 1
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
Bit 7
Timer1 Register
Bit 8
Legend:
—
Bit 9
T2CON
—
Bit 10
010C
—
Bit 11
PR2
TSIDL
Bit 12
0104
—
Bit 13
0106
TON
Bit 14
T1CON
0102
Bit 15
TIMER REGISTER MAP FOR dsPIC33FJ06GS101 AND dsPIC33FJ06GSX02
TMR2
0100
PR1
SFR
Addr
TMR1
SFR
Name
TABLE 4-11:
Bit 2
—
—
Bit 1
TCS
TCS
TCS
Bit 1
TCS
TCS
Bit 1
ICM<2:0>
TSYNC
Bit 2
—
TSYNC
Bit 2
Bit 0
—
—
—
Bit 0
—
—
Bit 0
0000
xxxx
All
Resets
0000
0000
FFFF
FFFF
xxxx
xxxx
xxxx
0000
FFFF
xxxx
All
Resets
0000
FFFF
xxxx
0000
FFFF
xxxx
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
© 2009 Microchip Technology Inc.
—
—
—
—
ICTMR
Preliminary
OCSIDL
—
—
—
—
—
018A
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
—
—
—
—
—
SYNCOEN
Bit 8
MDC<15:0>
PTPER<15:0>
SYNCPOL
Bit 9
SEVTCMP<15:3>
—
EIPU
Bit 10
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
SEIEN
Bit 11
—
Legend:
—
SESTAT
Bit 12
—
0406
—
PTSIDL
—
—
Bit 13
Bit 14
—
Bit 7
—
—
SYNCEN
Output Compare 2 Register
040A
—
PTEN
Bit 15
—
—
—
Bit 6
Output Compare 2 Secondary Register
—
SEVTCMP
0404
PTPER
OCSIDL
Bit 7
Output Compare 1 Register
MDC
0400
0402
PTCON
—
HIGH-SPEED PWM REGISTER MAP
—
—
Legend:
—
OC2CON
—
0188
OCSIDL
OC2R
—
0186
—
Bit 8
OC2RS
PTCON2
Bit 6
Output Compare 1 Secondary Register
Bit 9
0184
Bit 10
OC1CON
Bit 11
0182
Bit 12
0180
Bit 13
OC1R
Bit 14
OC1RS
Bit 15
SFR
Addr
Addr
Offset
—
Output Compare 1 Register
SFR
Name
File Name
Bit 7
—
Bit 5
—
—
Bit 6
Bit 4
OCFLT
OCFLT
Bit 4
—
—
SYNCSRC<1:0>
Bit 5
—
—
Bit 5
Bit 4
Bit 3
—
Bit 3
OCTSEL
OCTSEL
Bit 3
Bit 1
Bit 2
Bit 2
—
—
—
Bit 0
Bit 0
Bit 0
Bit 0
PCLKDIV<2:0>
SEVTPS<3:0>
Bit 1
OCM<2:0>
OCM<2:0>
Bit 1
OCM<2:0>
Bit 1
ICM<2:0>
ICM<2:0>
Bit 2
Bit 2
OCTSEL
ICBNE
ICBNE
Bit 3
OCFLT
ICOV
ICOV
Bit 4
OUTPUT COMPARE REGISTER MAP dsPIC33FJ16GSX02 AND dsPIC33FJ06GSX04
—
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
Bit 8
Legend:
TABLE 4-17:
ICI<1:0>
Output Compare 1 Secondary Register
Bit 9
0184
Bit 10
OC1CON
Bit 11
0182
Bit 12
0180
Bit 13
OC1R
Bit 14
OC1RS
Bit 15
SFR
Addr
TABLE 4-16:
Bit 5
ICI<1:0>
Bit 6
OUTPUT COMPARE REGISTER MAP dsPIC33FJ06GS101 AND dsPIC33FJ06GSX02
—
SFR
Name
TABLE 4-15:
ICSIDL
ICTMR
Input Capture 2 Register
—
Input Capture 1 Register
—
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
—
Bit 7
Legend:
—
—
Bit 8
0146
—
Bit 9
IC2CON
ICSIDL
Bit 10
0144
—
Bit 11
IC2BUF
—
Bit 12
0140
Bit 13
0142
Bit 14
IC1CON
Bit 15
INPUT CAPTURE REGISTER MAP FOR dsPIC33FJ16GSX02 AND dsPIC33FJ16GSX04
IC1BUF
SFR Addr
SFR
Name
TABLE 4-14:
0000
0000
FFF8
0000
0000
All
Resets
0000
xxxxx
xxxx
0000
xxxx
xxxx
All
Resets
0000
xxxx
xxxx
All
Resets
0000
xxxx
0000
xxxx
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318D-page 57
DS70318D-page 58
0426
0428
042A
042C
042E
0430
0432
0434
0436
0438
PDC1
PHASE1
DTR1
ALTDTR1
SDC1
SPHASE1
TRIG1
TRGCON1
STRIG1
PWMCAP1
PHR
—
—
IFLTMOD
POLH
PHF
PLR
TRGDIV<3:0>
—
—
PENL
CLSTAT TRGSTAT
PLF
TRGIEN
Bit 10
—
—
PWMCAP1<15:3>
CLLEBEN
—
Preliminary
044A
044C
044E
0450
0452
0454
0456
DTR2
ALTDTR2
SDC2
SPHASE2
TRIG2
TRGCON2
STRIG2
PHR
—
—
PHF
PLR
TRGDIV<3:0>
—
—
PLF
TRGIEN
Bit 10
—
—
CLLEBEN
PWMCAP2<15:3>
—
—
LEB<9:3>
DTM
—
—
FLTDAT<1:0>
Bit 4
Bit 5
FLTSRC<4:0>
OVRDAT<1:0>
ALTDTR2<13:0>
SDC2<15:0>
Bit 6
DTC<1:0>
Bit 7
DTR2<13:0>
SPHASE2<15:0>
STRGCMP<15:3>
—
PDC2<15:0>
CLMOD
OVRENL
MDCS
Bit 8
PHASE2<15:0>
CLPOL
OVRENH
ITB
Bit 9
TRGCMP<15:3>
PMOD<1:0>
CLIEN
FLTLEBEN
CLSRC<4:0>
POLL
FLTIEN
Bit 11
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
0448
PHASE2
POLH
TRGSTAT
Bit 12
Legend:
0446
PDC2
IFLTMOD
PENL
CLSTAT
Bit 13
0458
0444
FCLCON2
PENH
FLTSTAT
Bit 14
045A
0442
IOCON2
Bit 15
LEBCON2
0440
PWMCON2
CAM
Bit 2
—
—
—
TRGSTRT<5:0>
—
FLTPOL
CLDAT<1:0>
—
Bit 3
OSYNC
IUE
Bit 0
—
—
—
—
—
—
—
—
FLTMOD<1:0>
SWAP
XPRES
Bit 1
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
CAM
Bit 2
—
—
—
TRGSTRT<5:0>
—
FLTPOL
CLDAT<1:0>
—
Bit 3
OSYNC
IUE
Bit 0
—
—
—
—
—
—
—
—
FLTMOD<1:0>
SWAP
XPRES
Bit 1
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
HIGH-SPEED PWM GENERATOR 2 REGISTER MAP FOR dsPIC33FJ06GS102/202 AND dsPIC33FJ16GSX02/X04 DEVICES ONLY
PWMCAP2
Addr
Offset
File Name
TABLE 4-19:
—
LEB<9:3>
DTM
—
—
FLTDAT<1:0>
Bit 4
Bit 5
FLTSRC<4:0>
OVRDAT<1:0>
ALTDTR1<13:0>
SDC1<15:0>
Bit 6
DTC<1:0>
Bit 7
DTR1<13:0>
SPHASE1<15:0>
STRGCMP<15:3>
—
PDC1<15:0>
CLMOD
OVRENL
MDCS
Bit 8
PHASE1<15:0>
CLPOL
OVRENH
ITB
Bit 9
TRGCMP<15:3>
PMOD<1:0>
CLIEN
Bit 11
FLTLEBEN
CLSRC<4:0>
POLL
FLTIEN
Bit 12
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
0424
FCLCON1
PENH
FLTSTAT
Bit 13
Legend:
0422
IOCON1
Bit 14
043A
0420
PWMCON1
Bit 15
HIGH-SPEED PWM GENERATOR 1 REGISTER MAP
LEBCON1
Addr
Offset
File Name
TABLE 4-18:
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
© 2009 Microchip Technology Inc.
046C
046C
046E
0470
0472
0474
0476
DTR3
ALTDTR3
SDC3
SPHASE3
TRIG3
TRGCON3
STRIG3
PHR
—
—
PHF
PLR
TRGDIV<3:0>
—
—
PLF
TRGIEN
—
—
Preliminary
048A
048A
048E
0490
0492
0494
0496
DTR4
ALTDTR4
SDC4
SPHASE4
TRIG4
TRGCON4
STRIG4
PHR
—
—
PHF
PLR
TRGDIV<3:0>
—
—
PLF
TRGIEN
Bit 10
—
—
CLLEBEN
PWMCAP4<15:3>
—
—
LEB<9:3>
DTM
—
—
FLTDAT<1:0>
Bit 4
Bit 5
FLTSRC<4:0>
OVRDAT<1:0>
ALTDTR4<13:0>
SDC4<15:0>
Bit 6
DTC<1:0>
Bit 7
DTR4<13:0>
SPHASE4<15:0>
STRGCMP<15:3>
—
PDC4<15:0>
CLMOD
OVRENL
MDCS
Bit 8
PHASE4<15:0>
CLPOL
OVRENH
ITB
Bit 9
TRGCMP<15:3>
PMOD<1:0>
CLIEN
FLTLEBEN
CLSRC<4:0>
POLL
FLTIEN
Bit 11
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
0488
PHASE4
POLH
TRGSTAT
Bit 12
Legend:
0486
PDC4
IFLTMOD
PENL
CLSTAT
Bit 13
0498
0484
FCLCON4
PENH
FLTSTAT
Bit 14
049A
0482
IOCON4
Bit 15
LEBCON4
0480
PWMCON4
—
LEB<9:3>
DTM
CAM
Bit 2
—
—
—
TRGSTRT<5:0>
—
FLTPOL
CLDAT<1:0>
—
Bit 3
OSYNC
IUE
Bit 0
—
—
—
—
—
—
—
—
FLTMOD<1:0>
SWAP
XPRES
Bit 1
CAM
Bit 2
—
—
—
TRGSTRT<5:0>
—
FLTPOL
CLDAT<1:0>
—
Bit 3
OSYNC
IUE
Bit 0
—
—
—
—
—
—
—
—
FLTMOD<1:0>
SWAP
XPRES
Bit 1
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
HIGH-SPEED PWM GENERATOR 4 REGISTER MAP FOR dsPIC33FJ06GS101 AND dsPIC33FJ16GS50X DEVICES ONLY
PWMCAP4
Addr
Offset
File Name
TABLE 4-21:
CLLEBEN
PWMCAP3<15:3>
—
—
—
FLTDAT<1:0>
Bit 4
Bit 5
FLTSRC<4:0>
OVRDAT<1:0>
ALTDTR3<13:0>
SDC3<15:0>
Bit 6
DTC<1:0>
Bit 7
DTR3<13:0>
SPHASE3<15:0>
STRGCMP<15:3>
—
PDC3<15:0>
CLMOD
OVRENL
MDCS
Bit 8
PHASE3<15:0>
CLPOL
OVRENH
ITB
Bit 9
TRGCMP<15:3>
PMOD<1:0>
CLIEN
FLTLEBEN
CLSRC<4:0>
POLL
FLTIEN
Bit 10
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
0468
PHASE3
POLH
TRGSTAT
Bit 11
Legend:
0466
PDC3
IFLTMOD
PENL
CLSTAT
Bit 12
0478
0464
FCLCON3
PENH
FLTSTAT
Bit 13
047A
0462
IOCON3
Bit 14
LEBCON3
0460
PWMCON3
Bit 15
HIGH-SPEED PWM GENERATOR 3 REGISTER MAP FOR dsPIC33FJ16GSX02/X04 DEVICES ONLY
PWMCAP3
Addr
Offset
File Name
TABLE 4-20:
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318D-page 59
DS70318D-page 60
—
—
Bit 14
USIDL
Bit 13
Preliminary
—
—
—
—
—
—
SSEN
—
CKP
SPIROV
SPI1 Transmit and Receive Buffer Register
—
—
CKE
0248
—
SMP
—
Bit 7
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
FRMPOL
MODE16
—
Bit 8
Legend:
SPIFSD
—
DISSCK DISSDO
—
Bit 9
SPI1BUF
FRMEN
—
SPISIDL
Bit 10
Bit 6
Baud Rate Generator Prescaler
0244
—
—
Bit 11
—
SPI1CON2
—
SPIEN
Bit 12
—
0240
Bit 13
—
0242
Bit 14
—
SPI1CON1
Bit 15
SPI1 REGISTER MAP
—
SPI1STAT
SFR
Addr
SFR Name
TABLE 4-24:
—
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
LPBACK
Bit 6
I2COV
STREN
Bit 6
URXISEL<1:0>
WAKE
Bit 7
Legend:
—
TRMT
UEN0
Bit 8
0228
—
UTXBF
UEN1
Bit 9
U1BRG
—
UTXE
N
—
Bit 10
IWCOL
0224
—
UTXBRK
RTSMD
Bit 11
—
—
ADD10
GCEN
0226
—
—
IREN
Bit 12
—
—
GCSTAT
SMEN
U1TXREG
—
UTXISEL1 UTXINV UTXISEL0
UARTEN
Bit 15
UART1 REGISTER MAP
—
—
BCL
DISSLW
—
—
—
U1RXREG
0222
0220
U1MODE
U1STA
SFR
Addr
SFR Name
TABLE 4-23:
—
—
—
A10M
—
—
—
Bit 7
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
—
—
IPMIEN
—
—
—
Bit 8
Legend:
—
—
—
I2CSIDL SCLREL
—
—
—
Bit 9
020C
—
ACKSTAT TRSTAT
I2CEN
—
—
—
Bit 10
I2C1MSK
0206
I2C1CON
—
—
—
Bit 11
0208
0204
I2C1BRG
—
—
—
—
Bit 12
020A
0202
I2C1TRN
Bit 13
I2C1ADD
0200
I2C1RCV
Bit 14
Bit 15
I2C1 REGISTER MAP
I2C1STAT
SFR
Addr
SFR
Name
TABLE 4-22:
Bit 3
Transmit Register
Receive Register
Bit 4
P
ACKEN
RIDLE
URXINV
Bit 4
PERR
BRGH
Bit 3
S
RCEN
—
MSTEN
—
Bit 5
—
—
Bit 4
—
SPRE<2:0>
—
Bit 3
UART Receive Register
UART Transmit Register
ADDEN
ABAUD
Bit 5
AMSK<9:0>
Address Register
D_A
ACKDT
Baud Rate Generator Register
Bit 5
Bit 1
RBF
RSEN
Bit 1
—
—
Bit 2
FERR
SPIRBF
Bit 0
URXDA
STSEL
Bit 0
TBF
SEN
Bit 0
FRMDLY
—
PPRE<1:0>
SPITBF
Bit 1
OERR
PDSEL<1:0>
Bit 2
R_W
PEN
Bit 2
0000
0000
0000
0000
All
Resets
0000
0000
xxxx
0110
0000
All
Resets
0000
0000
0000
1000
0000
00FF
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
—
—
GSWTRG
Bit 10
—
PCFG7
EIE
Bit 7
© 2009 Microchip Technology Inc.
032C
032E
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
ADCBUF6
ADCBUF7
Legend:
Preliminary
0326
0328
032A
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
ADCBUF4
ADCBUF5
Legend:
IRQEN2
ADC Data Buffer 5
ADC Data Buffer 4
ADC Data Buffer 3
ADC Data Buffer 2
ADC Data Buffer 1
ADC Data Buffer 0
—
ADCBUF3
—
IRQEN0
0324
—
—
EIE
ADBASE<15:1>
—
—
FORM
ADCBUF2
—
—
—
—
—
Bit 7
0322
—
TRGSRC1<4:0>
—
—
GSWTRG
Bit 8
0320
—
—
—
—
—
Bit 9
ADCBUF1
—
SWTRG1
—
—
SLOWCLK
Bit 10
ADCBUF0
—
PEND1
—
—
ADSIDL
Bit 11
030C
IRQEN1
—
—
—
Bit 12
ADCPC1
ADSTAT
—
ADON
Bit 13
0308
0306
ADPCFG
Bit 14
030A
0302
ADCON
Bit 15
ADCPC0
0300
SFR Name
—
PEND0
—
PCFG6
ORDER
Bit 6
—
SWTRG0
—
—
SEQSAMP
Bit 5
PEND2
PEND0
—
—
ORDER
Bit 6
SWTRG2
SWTRG0
—
PCFG5
SEQSAMP
Bit 5
Bit 4
—
PCFG4
ASYNCSAMP
Bit 4
—
—
—
ASYNCSAMP
HIGH-SPEED 10-BIT ADC REGISTER MAP FOR dsPIC33FJ06GS102 DEVICES ONLY
ADC Data Buffer 7
ADC Data Buffer 6
ADC Data Buffer 3
ADBASE
SFR
Addr
TABLE 4-26:
0326
ADC Data Buffer 2
ADC Data Buffer 1
ADC Data Buffer 0
—
ADCBUF3
TRGSRC3<4:0>
0324
SWTRG3
ADCBUF2
PEND3
0322
IRQEN3
IRQEN0
ADBASE<15:1>
—
—
FORM
Bit 8
ADCBUF1
—
—
—
Bit 9
0320
TRGSRC1<4:0>
—
—
—
Bit 11
ADCBUF0
—
—
SLOWCLK
Bit 12
030A
SWTRG1
—
—
ADSIDL
Bit 13
030C
PEND1
—
—
—
Bit 14
ADCPC1
IRQEN1
—
—
ADON
Bit 15
HIGH-SPEED 10-BIT ADC REGISTER MAP FOR dsPIC33FJ06GS101 DEVICES ONLY
ADCPC0
0306
0308
0302
ADPCFG
ADBASE
0300
ADCON
ADSTAT
SFR
Addr
SFR Name
TABLE 4-25:
—
PCFG2
Bit 2
P2RDY
TRGSRC2<4:0>
Bit 0
Bit 1
—
—
P1RDY P0RDY
PCFG1 PCFG0
Bit 0
—
—
P1RDY P0RDY
PCFG1 PCFG0
ADCS<2:0>
PCFG2
Bit 2
—
TRGSRC0<4:0>
—
PCFG3
—
Bit 3
—
Bit 1
ADCS<2:0>
TRGSRC0<4:0>
P3RDY
PCFG3
—
Bit 3
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
0000
0000
0000
0000
0000
0003
All
Resets
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
0000
0000
0000
0000
0000
0003
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318D-page 61
DS70318D-page 62
ADC Data Buffer13
0328
032A
0338
ADCBUF4
ADCBUF5
ADCBUF12
ADCBUF13 033A
—
IRQEN6
ADC Data Buffer 5
ADC Data Buffer 4
ADC Data Buffer 3
ADC Data Buffer 2
ADC Data Buffer 1
ADC Data Buffer 0
—
IRQEN2
Preliminary
0322
0324
0326
0328
032A
032C
032E
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
ADCBUF2
ADCBUF3
ADCBUF4
ADCBUF5
ADCBUF6
ADCBUF7
Legend:
TRGSRC3<4:0>
—
ADC Data Buffer 7
ADC Data Buffer 6
ADC Data Buffer 5
ADC Data Buffer 4
ADC Data Buffer 3
ADC Data Buffer 2
ADC Data Buffer 1
ADC Data Buffer 0
IRQEN2
IRQEN0
ADBASE<15:1>
—
EIE
PCFG7
0320
SWTRG3
—
—
FORM
ADCBUF1
PEND3
TRGSRC1<4:0>
—
—
—
Bit 7
ADCBUF0
IRQEN3
SWTRG1
—
—
GSWTRG
Bit 8
030C
PEND1
—
—
—
Bit 9
ADCPC1
IRQEN1
—
—
SLOWCLK
Bit 10
030A
—
—
ADSIDL
Bit 11
ADCPC0
—
—
—
Bit 12
0306
—
ADON
Bit 13
0308
0302
ADPCFG
Bit 14
ADBASE
0300
ADCON
Bit 15
ADSTAT
SFR
Addr
SFR Name
PEND6
PEND2
PEND0
P6RDY
—
ORDER
Bit 6
Bit 4
SWTRG6
SWTRG2
SWTRG0
—
PCFG5
—
PCFG4
SEQSAMP ASYNCSAMP
Bit 5
PEND2
PEND0
—
PCFG6
ORDER
Bit 6
Bit 4
SWTRG2
SWTRG0
—
PCFG5
—
PCFG4
SEQSAMP ASYNCSAMP
Bit 5
HIGH-SPEED 10-BIT ADC REGISTER MAP FOR dsPIC33FJ16GS402/404 DEVICES ONLY
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
TABLE 4-28:
Legend:
ADC Data Buffer 12
0326
ADCBUF3
—
—
0324
—
—
ADCBUF2
—
—
0322
—
—
IRQEN0
ADCBUF1
—
ADBASE<15:1>
—
—
EIE
0320
—
—
—
—
—
FORM
ADCBUF0
—
TRGSRC1<4:0>
—
—
—
Bit 7
0310
—
—
—
—
GSWTRG
Bit 8
ADCPC3
—
SWTRG1
—
—
—
Bit 9
030C
PEND1
—
—
SLOWCLK
Bit 10
ADCPC1
IRQEN1
—
—
ADSIDL
—
—
Bit 11
0308
0306
ADSTAT
—
ADON
Bit 12
030A
0302
ADPCFG
Bit 13
Bit 14
ADBASE
0300
ADCON
Bit 15
HIGH-SPEED 10-BIT ADC REGISTER MAP FOR dsPIC33FJ06GS202 DEVICES ONLY
ADCPC0
SFR
Addr
SFR Name
TABLE 4-27:
P2RDY
—
P2RDY
TRGSRC2<4:0>
Bit 0
Bit 1
—
P1RDY P0RDY
PCFG1 PCFG0
Bit 0
—
P1RDY P0RDY
PCFG1 PCFG0
ADCS<2:0>
PCFG2
TRGSRC0<4:0>
P3RDY
PCFG3
Bit 2
TRGSRC6<4:0>
TRGSRC2<4:0>
Bit 3
Bit 1
ADCS<2:0>
PCFG2
Bit 2
TRGSRC0<4:0>
—
PCFG3
—
Bit 3
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
0000
0000
0000
0000
0000
0003
All
Resets
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
0000
0000
0000
0000
0000
0000
0003
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
—
—
PCFG7
EIE
Bit 7
© 2009 Microchip Technology Inc.
ADC Data Buffer 13
0326
0328
032A
032C
032E
0338
ADCBUF3
ADCBUF4
ADCBUF5
ADCBUF6
ADCBUF7
ADCBUF12
ADCBUF13 033A
Legend:
ADC Data Buffer 12
0324
ADC Data Buffer 7
ADC Data Buffer 6
ADC Data Buffer 5
ADC Data Buffer 4
ADC Data Buffer 3
ADC Data Buffer 2
ADC Data Buffer 1
ADC Data Buffer 0
IRQEN6
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
—
ADCBUF2
—
IRQEN2
0322
—
TRGSRC3<4:0>
ADCBUF1
—
SWTRG3
0320
—
PEND3
IRQEN0
ADBASE<15:1>
—
—
FORM
Bit 8
ADCBUF0
—
—
—
—
Bit 9
0310
TRGSRC1<4:0>
—
—
GSWTRG
Bit 10
ADCPC3
—
—
—
—
Bit 11
030A
SWTRG1
—
—
SLOWCLK
Bit 12
030C IRQEN3
PEND1
—
—
ADSIDL
—
—
Bit 13
Bit 14
ADCPC1
IRQEN1
—
—
ADON
Bit 15
PEND6
PEND2
PEND0
P6RDY
PCFG6
ORDER
Bit 6
Bit 4
SWTRG6
SWTRG2
SWTRG0
—
PCFG5
—
PCFG4
SEQSAMP ASYNCSAMP
Bit 5
HIGH-SPEED 10-BIT ADC REGISTER MAP FOR dsPIC33FJ16GS502 DEVICES ONLY
ADCPC0
0306
0308
0302
ADPCFG
ADBASE
0300
ADCON
ADSTAT
SFR
Addr
SFR Name
TABLE 4-29:
Bit 1
P2RDY
TRGSRC6<4:0>
TRGSRC2<4:0>
Bit 0
—
P1RDY P0RDY
PCFG1 PCFG0
ADCS<2:0>
PCFG2
Bit 2
TRGSRC0<4:0>
P3RDY
PCFG3
—
Bit 3
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
0000
0000
0000
0000
0000
0000
0003
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Preliminary
DS70318D-page 63
DS70318D-page 64
—
FORM
Bit 8
—
Preliminary
ADC Data Buffer 13
0324
0326
0328
032A
032C
032E
0330
0332
0334
0336
0338
ADCBUF2
ADCBUF3
ADCBUF4
ADCBUF5
ADCBUF6
ADCBUF7
ADCBUF8
ADCBUF9
ADCBUF10
ADCBUF11
ADCBUF12
ADCBUF13 033A
Legend:
ADC Data Buffer 12
0322
—
ADC Data Buffer 11
ADC Data Buffer 10
ADC Data Buffer 9
ADC Data Buffer 8
ADC Data Buffer 7
ADC Data Buffer 6
ADC Data Buffer 5
ADC Data Buffer 4
ADC Data Buffer 3
ADC Data Buffer 2
ADC Data Buffer 1
ADC Data Buffer 0
IRQEN6
IRQEN4
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
—
—
ADCBUF1
—
TRGSRC5<4:0>
IRQEN2
0320
—
SWTRG5
TRGSRC3<4:0>
ADCBUF0
—
PEND5
SWTRG3
0310
IRQEN5
PEND3
IRQEN0
ADBASE<15:1>
—
PCFG7
EIE
Bit 7
ADCPC3
—
—
PCFG9 PCFG8
—
Bit 9
030E
TRGSRC1<4:0>
—
PCFG10
GSWTRG
Bit 10
ADCPC2
—
—
PCFG11
—
Bit 11
030A
SWTRG1
—
—
SLOWCLK
Bit 12
030C IRQEN3
PEND1
—
—
ADSIDL
—
—
Bit 13
Bit 14
ADCPC1
IRQEN1
—
—
ADON
Bit 15
PEND6
PEND4
PEND2
PEND0
P6RDY
PCFG6
ORDER
Bit 6
Bit 4
SWTRG6
SWTRG4
SWTRG2
SWTRG0
P5RDY
PCFG5
P4RDY
PCFG4
SEQSAMP ASYNCSAMP
Bit 5
HIGH-SPEED 10-BIT ADC REGISTER MAP FOR dsPIC33FJ16GS504 DEVICES ONLY
ADCPC0
0306
0308
0302
ADPCFG
ADBASE
0300
ADCON
ADSTAT
SFR
Addr
SFR Name
TABLE 4-30:
Bit 1
P2RDY
TRGSRC6<4:0>
TRGSRC4<4:0>
TRGSRC2<4:0>
Bit 0
—
P1RDY P0RDY
PCFG1 PCFG0
ADCS<2:0>
PCFG2
Bit 2
TRGSRC0<4:0>
P3RDY
PCFG3
—
Bit 3
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
0000
0000
0000
0000
0000
0000
0000
0003
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
0544
0546
CMPDAC1
CMPCON2
CMPDAC2
© 2009 Microchip Technology Inc.
054A
054C
054E
CMPDAC3
CMPCON4
CMPDAC4
0546
0548
CMPCON2
CMPCON3
0544
CMPDAC1
CMPDAC2
0540
0542
CMPCON1
ADR
File Name
TABLE 4-32:
0540
0542
CMPCON1
ADR
File Name
TABLE 4-31:
—
—
—
CMPSIDL
—
CMPSIDL
—
—
Bit 13
Bit 14
—
—
—
—
Bit 12
—
—
—
—
Bit 11
—
—
—
—
Bit 10
—
—
Bit 9
DACOE
DACOE
Bit 8
Bit 6
INSEL<1:0>
INSEL<1:0>
Bit 7
—
Bit 4
—
CMREF<9:0>
EXTREF
CMREF<9:0>
EXTREF
Bit 5
CMPSTAT
CMPSTAT
Bit 3
—
CMPON
—
CMPON
—
CMPON
—
CMPON
Bit 15
—
—
—
—
—
—
—
CMPSIDL
-
CMPSIDL
-
CMPSIDL
-
CMPSIDL
—
—
Bit 13
Bit 14
—
—
—
—
—
—
—
—
Bit 12
—
—
—
—
—
—
—
—
Bit 11
—
—
—
—
—
—
—
—
Bit 10
—
—
—
—
Bit 9
DACOE
DACOE
DACOE
DACOE
Bit 8
Bit 6
INSEL<1:0>
INSEL<1:0>
INSEL<1:0>
INSEL<1:0>
Bit 7
—
Bit 4
—
—
—
CMREF<9:0>
EXTREF
CMREF<9:0>
EXTREF
CMREF<9:0>
EXTREF
CMREF<9:0>
EXTREF
Bit 5
CMPSTAT
CMPSTAT
CMPSTAT
CMPSTAT
Bit 3
ANALOG COMPARATOR CONTROL REGISTER MAP dsPIC33FJ16GS502/504 DEVICES ONLY
—
CMPON
—
CMPON
Bit 15
ANALOG COMPARATOR CONTROL REGISTER MAP FOR dsPIC33FJ06GS202 DEVICES ONLY
—
—
—
—
Bit 2
—
—
Bit 2
CMPPOL
CMPPOL
CMPPOL
CMPPOL
Bit 1
CMPPOL
CMPPOL
Bit 1
RANGE
RANGE
RANGE
RANGE
Bit 0
RANGE
RANGE
Bit 0
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
0000
0000
0000
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Preliminary
DS70318D-page 65
DS70318D-page 66
06A4
06A8
06AA
06BA
06BC
06BE
06C0
06C2
06C4
RPINR18
RPINR20
RPINR21
RPINR29
RPINR30
RPINR31
RPINR32
RPINR33
RPINR34
Preliminary
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 13
—
—
—
—
Bit 12
—
—
—
—
SYNCI1R<5:0>
FLT7R<5:0>
FLT5R<5:0>
FLT3R<5:0>
FLT1R<5:0>
—
SCK1R<5:0>
U1CTSR<5:0>
—
IC2R<5:0>
T3CKR<5:0>
T1CKR<5:0>
—
—
Bit 10
INT1R<5:0>
Bit 11
—
—
—
—
Bit 9
—
—
—
—
Bit 8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 7
06D4
06D6
06F0
06F2
RPOR2
RPOR3
RPOR16
RPOR17
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 6
—
—
—
Bit 5
—
—
—
—
—
—
Bit 15
—
—
—
—
—
—
Bit 14
Bit 13
Bit 12
Bit 10
RP35<5:0>
RP33<5:0>
RP7R<5:0>
RP5R<5:0>
RP3R<5:0>
RP1R<5:0>
Bit 11
Bit 9
Bit 8
—
—
—
—
—
—
Bit 7
—
—
—
—
—
—
Bit 6
Bit 5
PERIPHERAL PIN SELECT OUTPUT REGISTER MAP FOR dsPIC33FJ06GS101
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
06D0
06D2
RPOR0
RPOR1
Addr
File
Name
TABLE 4-34:
Legend:
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 14
Bit 15
PERIPHERAL PIN SELECT INPUT REGISTER MAP
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
0696
RPINR11
Legend:
0686
0684
RPINR2
068E
0682
RPINR1
RPINR7
0680
RPINR0
RPINR3
SFR
Addr
SFR Name
TABLE 4-33:
Bit 4
—
—
—
Bit 4
—
Bit 2
—
—
Bit 2
RP34<5:0>
RP32<5:0>
RP6R<5:0>
RP4R<5:0>
RP2R<5:0>
RP0R<5:0>
Bit 3
SYNCI2R<5:0>
FLT8R<5:0>
FLT6R<5:0>
FLT4R<5:0>
FLT2R<5:0>
—
SS1R<5:0>
SDI1R<5:0>
U1RXR<5:0>
OCFAR<5:0>
IC1R<5:0>
T2CKR<5:0>
—
INT2R<5:0>
—
Bit 3
Bit 1
—
—
—
Bit 1
Bit 0
—
—
—
Bit 0
0000
0000
0000
0000
0000
0000
All
Resets
3F3F
3F3F
3F3F
3F3F
3F3F
3F00
0000
3F3F
003F
3F3F
3F3F
3F3F
0000
003F
3F00
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
© 2009 Microchip Technology Inc.
06DA
06DC
06DE
06F0
06F2
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
RPOR5
RPOR6
RPOR7
RPOR16
RPOR17
Legend:
—
—
—
—
—
—
—
—
RP35<5:0>
RP33<5:0>
RP15R<5:0>
RP13R<5:0>
RP11R<5:0>
RP9R<5:0>
RP7R<5:0>
RP5R<5:0>
—
—
—
—
—
—
—
—
—
—
Bit 7
—
—
—
—
—
—
—
—
—
—
Bit 6
Bit 5
Bit 4
Bit 2
RP34<5:0>
RP32<5:0>
RP14R<5:0>
RP12R<5:0>
RP10R<5:0>
RP8R<5:0>
RP6R<5:0>
RP4R<5:0>
RP2R<5:0>
RP0R<5:0>
Bit 3
06D8
Preliminary
06DA
06DC
06DE
06E0
06E2
06E4
06E6
06E8
06EA
06EC
06F0
06F2
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
RPOR5
RPOR6
RPOR7
RPOR8
RPOR9
RPOR10
RPOR11
RPOR12
RPOR13
RPOR14
RPOR16
RPOR17
Legend:
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
RP35<5:0>
RP33<5:0>
RP29R<5:0>
RP27R<5:0>
RP25R<5:0>
RP23R<5:0>
RP21R<5:0>
RP19R<5:0>
RP17R<5:0>
RP15R<5:0>
RP13R<5:0>
RP11R<5:0>
RP9R<5:0>
RP7R<5:0>
RP5R<5:0>
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 7
RPOR4
Bit 8
06D6
Bit 9
06D4
RP3R<5:0>
RP1R<5:0>
Bit 10
RPOR3
—
—
Bit 11
RPOR2
—
—
Bit 12
06D0
Bit 13
06D2
Bit 14
RPOR1
Bit 15
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 6
Bit 5
Bit 4
Bit 2
RP34<5:0>
RP32<5:0>
RP28R<5:0>
RP26R<5:0>
RP24R<5:0>
RP22R<5:0>
RP20R<5:0>
RP18R<5:0>
RP16R<5:0>
RP14R<5:0>
RP12R<5:0>
RP10R<5:0>
RP8R<5:0>
RP6R<5:0>
RP4R<5:0>
RP2R<5:0>
RP0R<5:0>
Bit 3
PERIPHERAL PIN SELECT OUTPUT REGISTER MAP FOR dsPIC33FJ16GS404 AND dsPIC33FJ16GS504
—
—
—
—
—
—
—
—
RPOR0
Addr
File Name
TABLE 4-36:
06D8
RPOR4
Bit 8
06D6
Bit 9
06D4
RP3R<5:0>
RP1R<5:0>
Bit 10
RPOR3
—
—
Bit 11
RPOR2
—
—
Bit 12
06D0
Bit 13
06D2
Bit 14
RPOR1
Bit 15
Bit 1
Bit 1
Bit 0
Bit 0
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
All
Resets
PERIPHERAL PIN SELECT OUTPUT REGISTER MAP FOR dsPIC33FJ06GS102, dsPIC33FJ06GS202, dsPIC33FJ16GS402
AND dsPIC33FJ16GS502
RPOR0
Addr
File Name
TABLE 4-35:
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318D-page 67
DS70318D-page 68
Preliminary
02CE
ODCB
02CC
02CE
PORTB
LATB
ODCB
—
—
—
—
—
—
—
—
Bit 9
—
—
—
—
Bit 8
—
—
—
—
Bit 7
—
—
—
—
Bit 14
—
—
—
—
Bit 13
—
—
—
—
Bit 12
—
—
—
—
Bit 11
—
—
—
—
Bit 10
—
—
—
—
Bit 9
—
—
—
—
Bit 8
ODCB7
LATB7
RB7
TRISB7
Bit 7
Bit 15
LATB15
RB15
ODCB15
ODCB14
LATB14
RB14
TRISB14
Bit 14
ODCB13
LATB13
RB13
TRISB13
Bit 13
ODCB12
LATB12
RB12
TRISB12
Bit 12
ODCB11
LATB11
RB11
TRISB11
Bit 11
ODCB10
LATB10
RB10
TRISB10
Bit 10
ODCB9
LATB9
RB9
TRISB9
Bit 9
ODCB8
LATB8
RB8
TRISB8
Bit 8
ODCB7
LATB7
RB7
TRISB7
Bit 7
02D6
ODCC
—
—
—
—
—
—
Bit 14
ODCC13
LATC13
RC13
TRISC13
Bit 13
ODCC12
LATC12
RC12
TRISC12
Bit 12
ODCC11
LATC11
RC11
TRISC11
Bit 11
ODCC10
LATC10
RC10
TRISC10
Bit 10
ODCC9
LATC9
RC9
TRISC9
Bit 9
ODCC8
LATC8
RC8
TRISC8
Bit 8
ODCC7
LATC7
RC7
TRISC7
Bit 7
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
02D4
LATC
—
—
02D0
02D2
ODCB5
LATB5
RB5
TRISB5
Bit 5
—
—
—
—
Bit 5
ODCB6
LATB6
RB6
TRISB6
Bit 6
ODCC6
LATC6
RC6
TRISC6
Bit 6
Bit 4
ODCB4
LATB4
RB4
TRISB4
Bit 4
ODCA4
LATA4
RA4
TRISA4
ODCB5
LATB5
RB5
TRISB5
Bit 5
ODCC5
LATC5
RC5
TRISC5
Bit 5
PORTC REGISTER MAP FOR dsPIC33FJ16GS404 AND dsPIC33FJ16GS504
Bit 15
TRISC
ODCB6
LATB6
RB6
TRISB6
Bit 6
—
—
—
—
Bit 6
ODCB3
LATB3
RB3
TRISB3
Bit 3
ODCA3
LATA3
RA3
TRISA3
Bit 3
ODCB2
LATB2
RB2
TRISB2
Bit 2
ODCA2
LATA2
RA2
TRISA2
Bit 2
ODCB1
LATB1
RB1
TRISB1
Bit 1
ODCA1
LATA1
RA1
TRISA1
Bit 1
ODCB0
LATB0
RB0
TRISB0
Bit 0
ODCA0
LATA0
RA0
TRISA0
Bit 0
ODCC4
LATC4
RC4
TRISC4
Bit 4
ODCB4
LATB4
RB4
TRISB4
Bit 4
ODCC3
LATC3
RC3
TRISC3
Bit 3
ODCB3
LATB3
RB3
TRISB3
Bit 3
ODCC2
LATC2
RC2
TRISC2
Bit 2
ODCB2
LATB2
RB2
TRISB2
Bit 2
ODCC1
LATC1
RC1
TRISC1
Bit 1
ODCB1
LATB1
RB1
TRISB1
Bit 1
ODCC0
LATC0
RC0
TRISC0
Bit 0
ODCB0
LATB0
RB0
TRISB0
Bit 0
PORTB REGISTER MAP FOR dsPIC33FJ06GS102, dsPIC33FJ06GS202, dsPIC33FJ16GS402, dsPIC33FJ16GS404,
dsPIC33FJ16GS502 AND dsPIC33FJ16GS504
TRISB15
PORTC
Legend:
—
—
SFR
Addr
TABLE 4-40:
SFR Name
—
—
—
—
Bit 10
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
02C8
02CA
TRISB
SFR
Addr
SFR
Name
TABLE 4-39:
Legend:
—
—
—
—
Bit 11
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
02CC
LATB
—
—
02C8
02CA
TRISB
Bit 15
PORTB
Legend:
—
—
—
—
Bit 12
PORTB REGISTER MAP FOR dsPIC33FJ06GS101
SFR
Addr
TABLE 4-38:
SFR Name
—
—
—
—
Bit 13
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
02C6
ODCA
Legend:
02C4
LATA
—
—
—
—
02C0
02C2
TRISA
Bit 14
Bit 15
PORTA REGISTER MAP
SFR
Addr
PORTA
SFR Name
TABLE 4-37:
0000
0000
xxxx
3FFF
All
Resets
0000
0000
xxxx
FFFF
All
Resets
0000
0000
xxxx
00FF
All
Resets
0000
0000
xxxx
001F
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
0750
OSCTUN
ACLKCON
ENAPLL
ROON
—
ROI
—
TRAPR
Bit 15
APLLCK
SELACLK
—
ROSIDL
—
DOZE<2:0>
—
ROSEL
—
—
—
COSC<2:0>
Bit 12
Bit 13
—
IOPUWR
Bit 14
—
—
DOZEN
—
—
Bit 11
SYSTEM CONTROL REGISTER MAP
VREGS
Bit 8
—
FRCDIV<2:0>
NOSC<2:0>
CM
Bit 9
APSTSCLR<2:0>
RODIV<3:0>
—
—
Bit 10
© 2009 Microchip Technology Inc.
ASRCSEL
—
—
WREN
—
WRERR
—
—
—
—
Bit 11
Bit 12
—
—
Bit 10
—
—
Bit 9
—
—
Bit 8
—
Bit 7
ERASE
Bit 6
—
Bit 5
Preliminary
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Bit 13
—
—
—
—
T2MD
Bit 12
PWM4MD
—
—
—
T1MD
Bit 11
—
—
CMPMD
—
—
Bit 10
—
—
—
IC2MD
PWMMD
Bit 9
PWM1MD
—
—
IC1MD
—
Bit 8
—
—
—
—
—
—
—
—
—
Bit 14
—
Bit 15
—
—
—
—
—
Bit 13
—
—
—
—
T2MD
Bit 12
—
—
—
—
T1MD
Bit 11
—
—
CMPMD
—
—
Bit 10
PWM2MD
—
—
IC2MD
PWMMD
Bit 9
PWM1MD
—
—
IC1MD
—
Bit 8
PMD REGISTER MAP FOR dsPIC33FJ06GS102 DEVICES ONLY
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
077A
PMD6
Legend:
0774
0776
PMD3
0772
PMD2
PMD4
0770
PMD1
SFR
Addr
TABLE 4-44:
SFR
Name
Bit 14
Bit 15
PMD REGISTER MAP FOR dsPIC33FJ06GS101 DEVICES ONLY
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
077A
PMD6
Legend:
0774
0776
PMD3
0772
PMD4
0770
PMD2
SFR
Addr
PMD1
SFR
Name
TABLE 4-43:
—
—
—
—
I2C1MD
Bit 7
—
—
—
—
I2C1MD
Bit 7
—
—
—
—
—
Bit 6
—
—
—
—
—
Bit 6
—
—
—
—
U1MD
Bit 5
—
—
—
—
U1MD
Bit 5
—
—
—
—
—
Bit 4
—
—
—
—
—
Bit 4
—
REFOMD
—
—
SPI1MD
Bit 3
—
REFOMD
—
—
SPI1MD
Bit 3
Bit 3
—
NVMKEY<7:0>
—
Bit 4
—
PLLPRE<4:0>
—
IDLE
Bit 2
Bit 1
—
—
—
BOR
Bit 1
—
—
—
—
—
Bit 2
—
—
—
—
—
Bit 2
—
—
—
OC2MD
—
Bit 1
—
—
—
OC2MD
—
Bit 1
NVMOP<3:0>
Bit 2
—
TUN<5:0>
—
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
Reset value shown is for POR only. Value on other Reset states is dependent on the state of memory write or erase operations at the time of Reset.
—
WR
Bit 13
—
—
PLLDIV<8:0>
CF
SLEEP
Bit 3
Legend:
Note 1:
0760
Bit 14
—
—
—
WDTO
Bit 4
0766
NVMCON
Bit 15
NVM REGISTER MAP
FRCSEL
—
—
LOCK
SWDTEN
Bit 5
NVMKEY
Addr
File Name
TABLE 4-42:
IOLOCK
SWR
Bit 6
PLLPOST<1:0>
CLKLOCK
EXTR
Bit 7
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
The RCON register Reset values are dependent on type of Reset.
The OSCCON register Reset values are dependent on the FOSC Configuration bits and on type of Reset.
0748
REFOCON
Legend:
Note 1:
2:
0746
074E
PLLFBD
0742
0744
CLKDIV
0740
RCON
OSCCON
SFR
Addr
SFR Name
TABLE 4-41:
—
—
—
OC1MD
ADCMD
Bit 0
—
—
—
OC1MD
ADCMD
Bit 0
Bit 0
—
—
OSWEN
POR
Bit 0
0000
0000
0000
0000
0000
All
Resets
0000
0000
0000
0000
0000
All
Resets
0000
0000(1)
All
Resets
0000
0000
0000
0030
3040
0300(2)
xxxx(1)
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318D-page 69
DS70318D-page 70
0774
0776
077A
077C
PMD3
PMD4
PMD6
PMD7
Preliminary
077C
PMD7
—
—
—
—
—
—
—
—
—
T2MD
Bit 12
—
—
—
—
—
T1MD
Bit 11
—
—
—
CMPMD
—
—
Bit 10
CMP2MD
PWM2MD
—
—
—
PWMMD
Bit 9
CMP1MD
PWM1MD
—
—
IC1MD
—
Bit 8
077C
PMD7
—
—
—
—
—
I2C1MD
Bit 7
—
—
—
—
—
—
Bit 6
—
—
—
—
—
U1MD
Bit 5
—
—
—
—
—
—
Bit 4
—
—
—
—
—
—
—
—
—
—
—
—
Bit 14
Bit 15
—
—
—
—
—
T3MD
Bit 13
—
—
—
—
—
T2MD
Bit 12
—
—
—
—
—
T1MD
Bit 11
—
PWM3MD
—
—
—
—
Bit 10
—
PWM2MD
—
—
IC2MD
PWMMD
Bit 9
—
PWM1MD
—
—
IC1MD
—
Bit 8
—
—
—
—
—
—
Bit 6
—
—
—
—
—
U1MD
Bit 5
—
—
—
—
—
—
Bit 4
—
—
—
—
—
—
Bit 15
—
—
—
—
—
—
Bit 14
—
—
—
—
—
T3MD
Bit 13
—
—
—
—
—
T2MD
Bit 12
CMP4MD
PWM4MD
—
—
—
T1MD
Bit 11
CMP3MD
PWM3MD
—
CMPMD
—
—
Bit 10
CMP2MD
PWM2MD
—
—
IC2MD
PWMMD
Bit 9
CMP1MD
PWM1MD
—
—
IC1MD
—
Bit 8
—
—
—
—
—
I2C1MD
Bit 7
—
—
—
—
—
—
Bit 6
—
—
—
—
—
U1MD
Bit 5
—
—
—
—
—
—
Bit 4
PMD REGISTER MAP FOR dsPIC33FJ16GS502 AND dsPIC33FJ16GS504 DEVICES ONLY
—
—
—
—
—
I2C1MD
Bit 7
PMD REGISTER MAP FOR dsPIC33FJ16GS402 AND dsPIC33FJ16GS404 DEVICES ONLY
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
077A
PMD6
Legend:
0774
0776
PMD3
0772
PMD2
PMD4
0770
PMD1
SFR
Addr
TABLE 4-47:
SFR
Name
—
—
—
—
—
—
Bit 13
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
077A
PMD6
Legend:
0774
0776
PMD3
0772
PMD2
PMD4
0770
PMD1
SFR
Addr
TABLE 4-46:
SFR
Name
—
—
—
—
—
—
—
—
Bit 14
Bit 15
PMD REGISTER MAP FOR dsPIC33FJ06GS202 DEVICES ONLY
x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
0772
Legend:
0770
PMD2
SFR
Addr
PMD1
SFR
Name
TABLE 4-45:
—
—
REFOMD
—
—
SPI1MD
Bit 3
—
—
REFOMD
—
—
SPI1MD
Bit 3
—
—
REFOMD
—
—
SPI1MD
Bit 3
—
—
—
—
—
—
Bit 2
—
—
—
—
—
—
Bit 2
—
—
—
—
—
—
Bit 2
—
—
—
—
OC2MD
—
Bit 1
—
—
—
—
OC2MD
—
Bit 1
—
—
—
—
—
—
Bit 1
—
—
—
—
OC1MD
ADCMD
Bit 0
—
—
—
—
OC1MD
ADCMD
Bit 0
—
—
—
—
OC1MD
ADCMD
Bit 0
0000
0000
0000
0000
0000
0000
All
Resets
0000
0000
0000
0000
0000
0000
All
Resets
0000
0000
0000
0000
0000
0000
All
Resets
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.2.6
SOFTWARE STACK
4.3
In addition to its use as a working register, the W15
register in the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 devices is also used as a
software Stack Pointer. The Stack Pointer always
points to the first available free word and grows from
lower to higher addresses. It predecrements for stack
pops and post-increments for stack pushes, as shown
in Figure 4-6. For a PC push during any CALL instruction, the MSb of the PC is zero-extended before the
push, ensuring that the MSb is always clear.
Note:
A PC push during exception processing
concatenates the SRL register to the MSb
of the PC prior to the push.
The Stack Pointer Limit register (SPLIM) associated
with the Stack Pointer sets an upper address boundary
for the stack. SPLIM is uninitialized at Reset. As is the
case for the Stack Pointer, SPLIM<0> is forced to ‘0’
because all stack operations must be word-aligned.
Whenever an EA is generated using W15 as a source
or destination pointer, the resulting address is
compared with the value in SPLIM. If the contents of
the Stack Pointer (W15) and the SPLIM register are
equal and a push operation is performed, a stack error
trap will not occur. The stack error trap will occur on a
subsequent push operation. For example, to cause a
stack error trap when the stack grows beyond address
0x1000 in RAM, initialize the SPLIM with the value
0x0FFE.
Similarly, a Stack Pointer underflow (stack error) trap is
generated when the Stack Pointer address is found to
be less than 0x0800. This prevents the stack from
interfering with the Special Function Register (SFR)
space.
A write to the SPLIM register should not be immediately
followed by an indirect read operation using W15.
FIGURE 4-6:
Stack Grows Toward
Higher Address
0x0000
The addressing modes shown in Table 4-48 form the
basis of the addressing modes optimized to support the
specific features of individual instructions. The
addressing modes provided in the MAC class of
instructions differ from those in the other instruction
types.
4.3.1
FILE REGISTER INSTRUCTIONS
Most file register instructions use a 13-bit address field
(f) to directly address data present in the first 8192
bytes of data memory (near data space). Most file
register instructions employ a working register, W0,
which is denoted as WREG in these instructions. The
destination is typically either the same file register or
WREG (with the exception of the MUL instruction),
which writes the result to a register or register pair. The
MOV instruction allows additional flexibility and can
access the entire data space.
4.3.2
MCU INSTRUCTIONS
The three-operand MCU instructions are of the form:
Operand 3 = Operand 1 <function> Operand 2
where Operand 1 is always a working register (that is,
the addressing mode can only be register direct), which
is referred to as Wb. Operand 2 can be a W register,
fetched from data memory, or a 5-bit literal. The result
location can be either a W register or a data memory
location. The following addressing modes are
supported by MCU instructions:
•
•
•
•
•
Register Direct
Register Indirect
Register Indirect Post-Modified
Register Indirect Pre-Modified
5-Bit or 10-Bit Literal
Note:
CALL STACK FRAME
15
Instruction Addressing Modes
Not all instructions support all the
addressing modes given above. Individual
instructions can support different subsets
of these addressing modes.
0
PC<15:0>
000000000 PC<22:16>
<Free Word>
W15 (before CALL)
W15 (after CALL)
POP : [--W15]
PUSH : [W15++]
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 71
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 4-48:
FUNDAMENTAL ADDRESSING MODES SUPPORTED
Addressing Mode
Description
File Register Direct
The address of the file register is specified explicitly.
Register Direct
The contents of a register are accessed directly.
Register Indirect
The contents of Wn forms the Effective Address (EA).
Register Indirect Post-Modified
The contents of Wn forms the EA. Wn is post-modified (incremented or
decremented) by a constant value.
Register Indirect Pre-Modified
Wn is pre-modified (incremented or decremented) by a signed constant value
to form the EA.
Register Indirect with Register Offset The sum of Wn and Wb forms the EA.
(Register Indexed)
Register Indirect with Literal Offset
4.3.3
The sum of Wn and a literal forms the EA.
MOVE AND ACCUMULATOR
INSTRUCTIONS
4.3.4
Move instructions and the DSP accumulator class of
instructions provide a greater degree of addressing
flexibility than other instructions. In addition to the
addressing modes supported by most MCU
instructions, move and accumulator instructions also
support Register Indirect with Register Offset
Addressing mode, also referred to as Register Indexed
mode.
Note:
For the MOV instructions, the addressing
mode specified in the instruction can differ
for the source and destination EA.
However, the 4-bit Wb (register offset)
field is shared by both source and
destination (but typically only used by
one).
In summary, the following addressing modes are
supported by move and accumulator instructions:
•
•
•
•
•
•
•
•
Register Direct
Register Indirect
Register Indirect Post-modified
Register Indirect Pre-modified
Register Indirect with Register Offset (Indexed)
Register Indirect with Literal Offset
8-Bit Literal
16-Bit Literal
Note:
DS70318D-page 72
The dual source operand DSP instructions (CLR, ED,
EDAC, MAC, MPY, MPY.N, MOVSAC and MSC), also referred
to as MAC instructions, use a simplified set of addressing
modes to allow the user application to effectively
manipulate the data pointers through register indirect
tables.
The two-source operand prefetch registers must be
members of the set {W8, W9, W10, W11}. For data
reads, W8 and W9 are always directed to the X RAGU,
and W10 and W11 are always directed to the Y AGU.
The effective addresses generated (before and after
modification) must, therefore, be valid addresses within
X data space for W8 and W9 and Y data space for W10
and W11.
Note:
Register Indirect with Register Offset
Addressing mode is available only for W9
(in X space) and W11 (in Y space).
In summary, the following addressing modes are
supported by the MAC class of instructions:
•
•
•
•
•
Register Indirect
Register Indirect Post-Modified by 2
Register Indirect Post-Modified by 4
Register Indirect Post-Modified by 6
Register Indirect with Register Offset (Indexed)
4.3.5
Not all instructions support all the
addressing modes given above. Individual
instructions may support different subsets
of these addressing modes.
MAC INSTRUCTIONS
OTHER INSTRUCTIONS
Besides the addressing modes outlined previously, some
instructions use literal constants of various sizes. For
example, BRA (branch) instructions use 16-bit signed
literals to specify the branch destination directly, whereas
the DISI instruction uses a 14-bit unsigned literal field. In
some instructions, such as ADD Acc, the source of an
operand or result is implied by the opcode itself. Certain
operations, such as NOP, do not have any operands.
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.4
Modulo Addressing
Note:
Modulo Addressing mode is a method used to provide
an automated means to support circular data buffers
using hardware. The objective is to remove the need
for software to perform data address boundary checks
when executing tightly looped code, as is typical in
many DSP algorithms.
Modulo Addressing can operate in either data or program
space (since the data pointer mechanism is essentially
the same for both). One circular buffer can be supported
in each of the X (which also provides the pointers into
program space) and Y data spaces. Modulo Addressing
can operate on any W register pointer. However, it is not
advisable to use W14 or W15 for Modulo Addressing
since these two registers are used as the Stack Frame
Pointer and Stack Pointer, respectively.
In general, any particular circular buffer can be
configured to operate in only one direction as there are
certain restrictions on the buffer start address (for
incrementing buffers), or end address (for
decrementing buffers), based upon the direction of the
buffer.
The only exception to the usage restrictions is for
buffers that have a power-of-two length. As these
buffers satisfy the start and end address criteria, they
can operate in a bidirectional mode (that is, address
boundary checks are performed on both the lower and
upper address boundaries).
4.4.1
START AND END ADDRESS
The Modulo Addressing scheme requires that a
starting and ending address be specified and loaded
into the 16-bit Modulo Buffer Address registers:
XMODSRT, XMODEND, YMODSRT and YMODEND
(see Table 4-1).
FIGURE 4-7:
Y space Modulo Addressing EA
calculations assume word-sized data (LSb
of every EA is always clear).
The length of a circular buffer is not directly specified. It
is determined by the difference between the
corresponding start and end addresses. The maximum
possible length of the circular buffer is 32K words
(64 Kbytes).
4.4.2
W ADDRESS REGISTER
SELECTION
The Modulo and Bit-Reversed Addressing Control
register, MODCON<15:0>, contains enable flags as
well as a W register field to specify the W Address
registers. The XWM and YWM fields select the
registers that will operate with Modulo Addressing:
• If XWM = 15, X RAGU and X WAGU Modulo
Addressing is disabled.
• If YWM = 15, Y AGU Modulo Addressing is
disabled.
The X Address Space Pointer W register (XWM), to
which Modulo Addressing is to be applied, is stored in
MODCON<3:0> (see Table 4-1). Modulo Addressing is
enabled for X data space when XWM is set to any value
other than ‘15’ and the XMODEN bit is set at
MODCON<15>.
The Y Address Space Pointer W register (YWM) to
which Modulo Addressing is to be applied is stored in
MODCON<7:4>. Modulo Addressing is enabled for Y
data space when YWM is set to any value other than
‘15’ and the YMODEN bit is set at MODCON<14>.
MODULO ADDRESSING OPERATION EXAMPLE
Byte
Address
0x1100
0x1163
MOV
MOV
MOV
MOV
MOV
MOV
#0x1100, W0
W0, XMODSRT
#0x1163, W0
W0, MODEND
#0x8001, W0
W0, MODCON
MOV
#0x0000, W0
;W0 holds buffer fill value
MOV
#0x1110, W1
;point W1 to buffer
DO
AGAIN, #0x31
MOV
W0, [W1++]
AGAIN: INC W0, W0
;set modulo start address
;set modulo end address
;enable W1, X AGU for modulo
;fill the 50 buffer locations
;fill the next location
;increment the fill value
Start Addr = 0x1100
End Addr = 0x1163
Length = 0x0032 words
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 73
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.4.3
MODULO ADDRESSING
APPLICABILITY
Modulo Addressing can be applied to the Effective
Address (EA) calculation associated with any W
register. Address boundaries check for addresses
equal to:
• The upper boundary addresses for incrementing
buffers
• The lower boundary addresses for decrementing
buffers
It is important to realize that the address boundaries
check for addresses less than or greater than the upper
(for incrementing buffers) and lower (for decrementing
buffers) boundary addresses (not just equal to).
Address changes can, therefore, jump beyond
boundaries and still be adjusted correctly.
Note:
4.5
The modulo corrected effective address is
written back to the register only when PreModify or Post-Modify Addressing mode is
used to compute the effective address.
When an address offset (such as
[W7 + W2]) is used, Modulo Addressing
correction is performed but the contents of
the register remain unchanged.
If the length of a bit-reversed buffer is M = 2N bytes,
the last ‘N’ bits of the data buffer start address must
be zeros.
XB<14:0> is the Bit-Reversed Address modifier, or
‘pivot point,’ which is typically a constant. In the case of
an FFT computation, its value is equal to half of the FFT
data buffer size.
Note:
When enabled, Bit-Reversed Addressing is executed
only for Register Indirect with Pre-Increment or PostIncrement Addressing and word-sized data writes. It
will not function for any other addressing mode or for
byte-sized data, and normal addresses are generated
instead. When Bit-Reversed Addressing is active, the
W Address Pointer is always added to the address
modifier (XB), and the offset associated with the Register Indirect Addressing mode is ignored. In addition, as
word-sized data is a requirement, the LSb of the EA is
ignored (and always clear).
Note:
Bit-Reversed Addressing
Bit-Reversed Addressing mode is intended to simplify
data re-ordering for radix-2 FFT algorithms. It is
supported by the X AGU for data writes only.
The modifier, which can be a constant value or register
contents, is regarded as having its bit order reversed. The
address source and destination are kept in normal order.
Thus, the only operand requiring reversal is the modifier.
4.5.1
BIT-REVERSED ADDRESSING
IMPLEMENTATION
All bit-reversed EA calculations assume
word-sized data (LSb of every EA is
always clear). The XB value is scaled
accordingly to generate compatible (byte)
addresses.
Modulo Addressing and Bit-Reversed
Addressing should not be enabled
together. If an application attempts to do so,
Bit-Reversed Addressing will assume
priority when active for the X WAGU and X
WAGU; Modulo Addressing will be disabled. However, Modulo Addressing will
continue to function in the X RAGU.
If Bit-Reversed Addressing has already been enabled
by setting the BREN (XBREV<15>) bit, a write to the
XBREV register should not be immediately followed by
an indirect read operation using the W register that has
been designated as the Bit-Reversed Pointer.
Bit-Reversed Addressing mode is enabled in any of
these situations:
• BWM bits (W register selection) in the MODCON
register are any value other than 15 (the stack
cannot be accessed using Bit-Reversed
Addressing)
• The BREN bit is set in the XBREV register
• The addressing mode used is Register Indirect
with Pre-Increment or Post-Increment
DS70318D-page 74
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 4-8:
BIT-REVERSED ADDRESS EXAMPLE
Sequential Address
b15 b14 b13 b12 b11 b10 b9 b8
b7 b6 b5 b4
b3 b2
b1
0
Bit Locations Swapped Left-to-Right
Around Center of Binary Value
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b1 b2 b3 b4
0
Bit-Reversed Address
Pivot Point
XB = 0x0008 for a 16-Word Bit-Reversed Buffer
TABLE 4-49:
BIT-REVERSED ADDRESS SEQUENCE (16-ENTRY)
Normal Address
Bit-Reversed Address
A3
A2
A1
A0
Decimal
A3
A2
A1
A0
Decimal
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
0
0
8
0
0
1
0
2
0
1
0
0
4
0
0
1
1
3
1
1
0
0
12
0
1
0
0
4
0
0
1
0
2
0
1
0
1
5
1
0
1
0
10
0
1
1
0
6
0
1
1
0
6
0
1
1
1
7
1
1
1
0
14
1
0
0
0
8
0
0
0
1
1
1
0
0
1
9
1
0
0
1
9
1
0
1
0
10
0
1
0
1
5
1
0
1
1
11
1
1
0
1
13
1
1
0
0
12
0
0
1
1
3
1
1
0
1
13
1
0
1
1
11
1
1
1
0
14
0
1
1
1
7
1
1
1
1
15
1
1
1
1
15
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 75
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.6
4.6.1
Interfacing Program and Data
Memory Spaces
Since the address ranges for the data and program
spaces are 16 and 24 bits, respectively, a method is
needed to create a 23-bit or 24-bit program address
from 16-bit data registers. The solution depends on the
interface method to be used.
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 architecture uses a 24-bit-wide program space and a
16-bit-wide data space. The architecture is also a modified Harvard scheme, meaning that data can also be
present in the program space. To use this data successfully, it must be accessed in a way that preserves the
alignment of information in both spaces.
For table operations, the 8-bit Table Page register
(TBLPAG) is used to define a 32K word region within
the program space. This is concatenated with a 16-bit
EA to arrive at a full 24-bit program space address. In
this format, the Most Significant bit of TBLPAG is used
to determine if the operation occurs in the user memory
(TBLPAG<7> = 0) or the configuration memory
(TBLPAG<7> = 1).
Aside from normal execution, the dsPIC33FJ06GS101/
X02 and dsPIC33FJ16GSX02/X04 architecture
provides two methods by which program space can be
accessed during operation:
• Using table instructions to access individual bytes
or words anywhere in the program space
• Remapping a portion of the program space into
the data space (Program Space Visibility)
For remapping operations, the 8-bit Program Space
Visibility Register (PSVPAG) is used to define a
16K word page in the program space. When the Most
Significant bit of the EA is ‘1’, PSVPAG is concatenated
with the lower 15 bits of the EA to form a 23-bit program
space address. Unlike table operations, this limits
remapping operations strictly to the user memory area.
Table instructions allow an application to read or write
to small areas of the program memory. This capability
makes the method ideal for accessing data tables that
need to be updated periodically. It also allows access
to all bytes of the program word. The remapping
method allows an application to access a large block of
data on a read-only basis, which is ideal for look ups
from a large table of static data. The application can
only access the least significant word of the program
word.
TABLE 4-50:
ADDRESSING PROGRAM SPACE
Table 4-50 and Figure 4-9 show how the program EA is
created for table operations and remapping accesses
from the data EA. Here, P<23:0> refers to a program
space word, and D<15:0> refers to a data space word.
PROGRAM SPACE ADDRESS CONSTRUCTION
Access
Space
Access Type
Program Space Address
<23>
<22:16>
<15>
<14:1>
Instruction Access
(Code Execution)
User
TBLRD/TBLWT
(Byte/Word Read/Write)
User
TBLPAG<7:0>
Configuration
TBLPAG<7:0>
Data EA<15:0>
1xxx xxxx
xxxx xxxx xxxx xxxx
Program Space Visibility
(Block Remap/Read)
Note 1:
PC<22:1>
0
<0>
0
0xx xxxx xxxx xxxx xxxx xxx0
0xxx xxxx
User
Data EA<15:0>
xxxx xxxx xxxx xxxx
0
PSVPAG<7:0>
0
xxxx xxxx
Data EA<14:0>(1)
xxx xxxx xxxx xxxx
Data EA<15> is always ‘1’ in this case, but is not used in calculating the program space address. Bit 15 of
the address is PSVPAG<0>.
DS70318D-page 76
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 4-9:
DATA ACCESS FROM PROGRAM SPACE ADDRESS GENERATION
Program Counter(1)
Program Counter
0
0
23 bits
EA
Table Operations(2)
1/0
1/0
TBLPAG
8 bits
16 bits
24 bits
Select
Program Space Visibility(1)
(Remapping)
EA
1
0
PSVPAG
0
8 bits
15 bits
23 bits
User/Configuration
Space Select
Byte Select
Note 1: The Least Significant bit (LSb) of program space addresses is always fixed as ‘0’ to maintain word
alignment of data in the program and data spaces.
2: Table operations are not required to be word-aligned. Table read operations are permitted in the
configuration memory space.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 77
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.6.2
DATA ACCESS FROM PROGRAM
MEMORY USING TABLE
INSTRUCTIONS
The TBLRDL and TBLWTL instructions offer a direct
method of reading or writing the lower word of any
address within the program space without going
through data space. The TBLRDH and TBLWTH
instructions are the only method to read or write the
upper 8 bits of a program space word as data.
The PC is incremented by two for each successive
24-bit program word. This allows program memory
addresses to directly map to data space addresses.
Program memory can thus be regarded as two 16-bit
wide word address spaces, residing side by side, each
with the same address range. TBLRDL and TBLWTL
access the space that contains the least significant
data word. TBLRDH and TBLWTH access the space that
contains the upper data byte.
Two table instructions are provided to move byte or
word-sized (16-bit) data to and from program space.
Both function as either byte or word operations.
• TBLRDL (Table Read Low):
- In Word mode, this instruction maps the
lower word of the program space location
(P<15:0>) to a data address (D<15:0>).
FIGURE 4-10:
- In Byte mode, either the upper or lower byte
of the lower program word is mapped to the
lower byte of a data address. The upper byte
is selected when byte select is ‘1’; the lower
byte is selected when it is ‘0’.
• TBLRDH (Table Read High):
- In Word mode, this instruction maps the entire
upper word of a program address (P<23:16>)
to a data address. Note that D<15:8>, the
‘phantom byte’, will always be ‘0’.
- In Byte mode, this instruction maps the upper
or lower byte of the program word to D<7:0>
of the data address, in the TBLRDL
instruction. The data is always ‘0’ when the
upper ‘phantom’ byte is selected (Byte
Select = 1).
Similarly, two table instructions, TBLWTH and TBLWTL,
are used to write individual bytes or words to a program
space address. The details of their operation are
explained in Section 5.0 “Flash Program Memory”.
For all table operations, the area of program memory
space to be accessed is determined by the Table Page
register (TBLPAG). TBLPAG covers the entire program
memory space of the device, including user and
configuration spaces. When TBLPAG<7> = 0, the table
page is located in the user memory space. When
TBLPAG<7> = 1, the page is located in configuration
space.
ACCESSING PROGRAM MEMORY WITH TABLE INSTRUCTIONS
Program Space
TBLPAG
02
23
15
0
0x000000
23
16
8
0
00000000
0x020000
0x030000
00000000
00000000
00000000
‘Phantom’ Byte
TBLRDH.B (Wn<0> = 0)
TBLRDL.B (Wn<0> = 1)
TBLRDL.B (Wn<0> = 0)
TBLRDL.W
0x800000
DS70318D-page 78
The address for the table operation is determined by the data EA
within the page defined by the TBLPAG register.
Only read operations are shown; write operations are also valid in
the user memory area.
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
4.6.3
READING DATA FROM PROGRAM
MEMORY USING PROGRAM SPACE
VISIBILITY
The upper 32 Kbytes of data space may optionally be
mapped into any 16K word page of the program space.
This option provides transparent access to stored
constant data from the data space without the need to
use special instructions (such as TBLRDL/H).
Program space access through the data space occurs
if the Most Significant bit of the data space EA is ‘1’ and
program space visibility is enabled by setting the PSV
bit in the Core Control register (CORCON<2>). The
location of the program memory space to be mapped
into the data space is determined by the Program
Space Visibility Page register (PSVPAG). This 8-bit
register defines any one of 256 possible pages of
16K words in program space. In effect, PSVPAG
functions as the upper 8 bits of the program memory
address, with the 15 bits of the EA functioning as the
lower bits. By incrementing the PC by 2 for each
program memory word, the lower 15 bits of data space
addresses directly map to the lower 15 bits in the
corresponding program space addresses.
Data reads to this area add a cycle to the instruction
being executed, since two program memory fetches
are required.
Although each data space address 8000h and higher
maps directly into a corresponding program memory
address (see Figure 4-11), only the lower 16 bits of the
FIGURE 4-11:
24-bit program word are used to contain the data. The
upper 8 bits of any program space location used as
data should be programmed with ‘1111 1111’ or
‘0000 0000’ to force a NOP. This prevents possible
issues should the area of code ever be accidentally
executed.
PSV access is temporarily disabled during
table reads/writes.
Note:
For operations that use PSV and are executed outside
a REPEAT loop, the MOV and MOV.D instructions require
one instruction cycle in addition to the specified
execution time. All other instructions require two
instruction cycles in addition to the specified execution
time.
For operations that use PSV, and are executed inside
a REPEAT loop, these instances require two instruction
cycles in addition to the specified execution time of the
instruction:
• Execution in the first iteration
• Execution in the last iteration
• Execution prior to exiting the loop due to an
interrupt
• Execution upon re-entering the loop after an
interrupt is serviced
Any other iteration of the REPEAT loop will allow the
instruction using PSV to access data, to execute in a
single cycle.
PROGRAM SPACE VISIBILITY OPERATION
When CORCON<2> = 1 and EA<15> = 1:
Program Space
PSVPAG
02
23
15
Data Space
0
0x000000
0x0000
Data EA<14:0>
0x010000
0x018000
The data in the page
designated by
PSVPAG is mapped
into the upper half of
the data memory
space...
0x8000
PSV Area
0x800000
© 2009 Microchip Technology Inc.
Preliminary
...while the lower 15 bits
of the EA specify an
exact address within
0xFFFF the PSV area. This
corresponds exactly to
the same lower 15 bits
of the actual program
space address.
DS70318D-page 79
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 80
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
5.0
Note:
signal controller just before shipping the product. This
also allows the most recent firmware or a custom
firmware to be programmed.
FLASH PROGRAM MEMORY
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 5. “Flash
Programming” (DS70191), which is
available from the Microchip web site
(www.microchip.com).
RTSP is accomplished using TBLRD (table read) and
TBLWT (table write) instructions. With RTSP, the user
application can write program memory data, either in
blocks or ‘rows’ of 64 instructions (192 bytes) at a time,
or a single program memory word, and erase program
memory in blocks or ‘pages’ of 512 instructions
(1536 bytes) at a time.
5.1
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices contain internal Flash program memory for
storing and executing application code. The memory is
readable, writable and erasable during normal operation
over the entire VDD range.
Flash memory can be programmed in two ways:
• In-Circuit Serial Programming™ (ICSP™)
programming capability
• Run-Time Self-Programming (RTSP)
ICSP allows a dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 device to be serially
programmed while in the end application circuit. This is
done with two lines for programming clock and
programming data (one of the alternate programming
pin pairs: PGECx/PGEDx, and three other lines for
power (VDD), ground (VSS) and Master Clear (MCLR).
This allows customers to manufacture boards with
unprogrammed devices and then program the digital
FIGURE 5-1:
Table Instructions and Flash
Programming
Regardless of the method used, all programming of
Flash memory is done with the table read and table
write instructions. These allow direct read and write
access to the program memory space from the data
memory while the device is in normal operating mode.
The 24-bit target address in the program memory is
formed using bits<7:0> of the TBLPAG register and the
Effective Address (EA) from a W register specified in
the table instruction, as shown in Figure 5-1.
The TBLRDL and the TBLWTL instructions are used to
read or write to bits<15:0> of program memory.
TBLRDL and TBLWTL can access program memory in
both Word and Byte modes.
The TBLRDH and TBLWTH instructions are used to read
or write to bits<23:16> of program memory. TBLRDH
and TBLWTH can also access program memory in Word
or Byte mode.
ADDRESSING FOR TABLE REGISTERS
24 bits
Using
Program Counter
Program Counter
0
0
Working Reg EA
Using
Table Instruction
1/0
TBLPAG Reg
8 bits
User/Configuration
Space Select
© 2009 Microchip Technology Inc.
16 bits
24-bit EA
Preliminary
Byte
Select
DS70318D-page 81
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
5.2
RTSP Operation
5.3
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 Flash program memory array is organized into rows
of 64 instructions or 192 bytes. RTSP allows the user
application to erase a page of memory, which consists of
eight rows (512 instructions) at a time, and to program
one row or one word at a time. Table 24-12 shows typical
erase and programming times. The 8-row erase pages
and single row write rows are edge-aligned from the
beginning of program memory, on boundaries of
1536 bytes and 192 bytes, respectively.
The program memory implements holding buffers that
can contain 64 instructions of programming data. Prior
to the actual programming operation, the write data
must be loaded into the buffers sequentially. The
instruction words loaded must always be from a group
of 64 boundary.
The basic sequence for RTSP programming is to set up
a Table Pointer, then do a series of TBLWT instructions
to load the buffers. Programming is performed by
setting the control bits in the NVMCON register. A total
of 64 TBLWTL and TBLWTH instructions are required
to load the instructions.
All of the table write operations are single-word writes
(two instruction cycles) because only the buffers are
written. A programming cycle is required for
programming each row.
Programming Operations
A complete programming sequence is necessary for
programming or erasing the internal Flash in RTSP
mode. The processor stalls (waits) until the
programming operation is finished.
The programming time depends on the FRC accuracy
(see Table 24-20) and the value of the FRC Oscillator
Tuning register (see Register 8-4). Use the following
formula to calculate the minimum and maximum values
for the Row Write Time, Page Erase Time, and Word
Write Cycle Time parameters (see Table 24-12).
EQUATION 5-1:
PROGRAMMING TIME
T
-------------------------------------------------------------------------------------------------------------------------7.37 MHz × ( FRC Accuracy )% × ( FRC Tuning )%
For example, if the device is operating at +125°C,
the FRC accuracy will be ±5%. If the TUN<5:0> bits
(see Register 8-4) are set to ‘b111111, the
Minimum Row Write Time is:
11064 Cycles
T RW = ---------------------------------------------------------------------------------------------- = 1.435ms
7.37 MHz × ( 1 + 0.05 ) × ( 1 – 0.00375 )
and, the Maximum Row Write Time is:
11064 Cycles
T RW = ---------------------------------------------------------------------------------------------- = 1.586ms
7.37 MHz × ( 1 – 0.05 ) × ( 1 – 0.00375 )
Setting the WR bit (NVMCON<15>) starts the operation, and the WR bit is automatically cleared when the
operation is finished.
5.4
Control Registers
Two SFRs are used to read and write the program
Flash memory: NVMCON and NVMKEY.
The NVMCON register (Register 5-1) controls which
blocks are to be erased, which memory type is to be
programmed and the start of the programming cycle.
NVMKEY is a write-only register that is used for write
protection. To start a programming or erase sequence,
the user application must consecutively write 0x55 and
0xAA to the NVMKEY register. Refer to Section 5.3
“Programming Operations” for further details.
DS70318D-page 82
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 5-1:
NVMCON: FLASH MEMORY CONTROL REGISTER
R/SO-0(1)
R/W-0(1)
R/W-0(1)
U-0
U-0
U-0
U-0
U-0
WR
WREN
WRERR
—
—
—
—
—
bit 15
bit 8
U-0
R/W-0(1)
U-0
U-0
—
ERASE
—
—
R/W-0(1)
R/W-0(1)
R/W-0(1)
R/W-0(1)
NVMOP<3:0>(2)
bit 7
bit 0
Legend:
SO = Settable Only bit
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
WR: Write Control bit
1 = Initiates a Flash memory program or erase operation. The operation is self-timed and the bit is
cleared by hardware once operation is complete.
0 = Program or erase operation is complete and inactive
bit 14
WREN: Write Enable bit
1 = Enable Flash program/erase operations
0 = Inhibit Flash program/erase operations
bit 13
WRERR: Write Sequence Error Flag bit
1 = An improper program or erase sequence attempt or termination has occurred (bit is set
automatically on any set attempt of the WR bit)
0 = The program or erase operation completed normally
bit 12-7
Unimplemented: Read as ‘0’
bit 6
ERASE: Erase/Program Enable bit
1 = Perform the erase operation specified by NVMOP<3:0> on the next WR command
0 = Perform the program operation specified by NVMOP<3:0> on the next WR command
bit 5-4
Unimplemented: Read as ‘0’
bit 3-0
NVMOP<3:0>: NVM Operation Select bits(2)
If ERASE = 1:
1111 = Memory bulk erase operation
1101 = Erase general segment
0011 = No operation
0010 = Memory page erase operation
0001 = No operation
0000 = Erase a single Configuration register byte
If ERASE = 0:
1111 = No operation
1101 = No operation
0011 = Memory word program operation
0010 = No operation
0001 = Memory row program operation
0000 = Program a single Configuration register byte
Note 1: These bits can only be Reset on POR.
2: All other combinations of NVMOP<3:0> are unimplemented.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 83
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 5-2:
NVMKEY: NONVOLATILE MEMORY KEY REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
W-0
W-0
W-0
W-0
W-0
W-0
W-0
W-0
NVMKEY<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-8
Unimplemented: Read as ‘0’
bit 7-0
NVMKEY<7:0>: Key Register bits (write-only)
DS70318D-page 84
Preliminary
x = Bit is unknown
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
5.4.1
PROGRAMMING ALGORITHM FOR
FLASH PROGRAM MEMORY
4.
5.
One row of program Flash memory can be
programmed at a time. To achieve this, it is necessary
to erase the 8-row erase page that contains the desired
row. The general process is:
1.
2.
3.
Read eight rows of program memory
(512 instructions) and store in data RAM.
Update the program data in RAM with the
desired new data.
Erase the block (see Example 5-1):
a) Set the NVMOP bits (NVMCON<3:0>) to
‘0010’ to configure for block erase. Set the
ERASE (NVMCON<6>) and WREN
(NVMCON<14>) bits.
b) Write the starting address of the page to be
erased into the TBLPAG and W registers.
c) Write 0x55 to NVMKEY.
d) Write 0xAA to NVMKEY.
e) Set the WR bit (NVMCON<15>). The erase
cycle begins and the CPU stalls for the
duration of the erase cycle. When the erase is
done, the WR bit is cleared automatically.
EXAMPLE 5-1:
For protection against accidental operations, the write
initiate sequence for NVMKEY must be used to allow
any erase or program operation to proceed. After the
programming command has been executed, the user
application must wait for the programming time until
programming is complete. The two instructions
following the start of the programming sequence
should be NOPs, as shown in Example 5-3.
ERASING A PROGRAM MEMORY PAGE
; Set up NVMCON for block erase operation
MOV
#0x4042, W0
MOV
W0, NVMCON
; Init pointer to row to be ERASED
MOV
#tblpage(PROG_ADDR), W0
MOV
W0, TBLPAG
MOV
#tbloffset(PROG_ADDR), W0
TBLWTL W0, [W0]
DISI
#5
MOV
MOV
MOV
MOV
BSET
NOP
NOP
6.
Write the first 64 instructions from data RAM into
the program memory buffers (see Example 5-2).
Write the program block to Flash memory:
a) Set the NVMOP bits to ‘0001’ to configure
for row programming. Clear the ERASE bit
and set the WREN bit.
b) Write 0x55 to NVMKEY.
c) Write 0xAA to NVMKEY.
d) Set the WR bit. The programming cycle
begins and the CPU stalls for the duration of
the write cycle. When the write to Flash
memory is done, the WR bit is cleared
automatically.
Repeat steps 4 and 5, using the next available
64 instructions from the block in data RAM by
incrementing the value in TBLPAG, until all
512 instructions are written back to Flash memory.
#0x55, W0
W0, NVMKEY
#0xAA, W1
W1, NVMKEY
NVMCON, #WR
© 2009 Microchip Technology Inc.
;
; Initialize NVMCON
;
;
;
;
;
;
;
;
;
;
;
;
Initialize PM Page Boundary SFR
Initialize in-page EA[15:0] pointer
Set base address of erase block
Block all interrupts with priority <7
for next 5 instructions
Write the 55 key
Write the AA key
Start the erase sequence
Insert two NOPs after the erase
command is asserted
Preliminary
DS70318D-page 85
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
EXAMPLE 5-2:
LOADING THE WRITE BUFFERS
; Set up NVMCON for row programming operations
MOV
#0x4001, W0
;
MOV
W0, NVMCON
; Initialize NVMCON
; Set up a pointer to the first program memory location to be written
; program memory selected, and writes enabled
MOV
#0x0000, W0
;
MOV
W0, TBLPAG
; Initialize PM Page Boundary SFR
MOV
#0x6000, W0
; An example program memory address
; Perform the TBLWT instructions to write the latches
; 0th_program_word
MOV
#LOW_WORD_0, W2
;
MOV
#HIGH_BYTE_0, W3
;
TBLWTL W2, [W0]
; Write PM low word into program latch
TBLWTH W3, [W0++]
; Write PM high byte into program latch
; 1st_program_word
MOV
#LOW_WORD_1, W2
;
MOV
#HIGH_BYTE_1, W3
;
TBLWTL W2, [W0]
; Write PM low word into program latch
TBLWTH W3, [W0++]
; Write PM high byte into program latch
; 2nd_program_word
MOV
#LOW_WORD_2, W2
;
MOV
#HIGH_BYTE_2, W3
;
TBLWTL W2, [W0]
; Write PM low word into program latch
TBLWTH W3, [W0++]
; Write PM high byte into program latch
•
•
•
; 63rd_program_word
MOV
#LOW_WORD_31, W2
;
MOV
#HIGH_BYTE_31, W3
;
TBLWTL W2, [W0]
; Write PM low word into program latch
TBLWTH W3, [W0++]
; Write PM high byte into program latch
EXAMPLE 5-3:
INITIATING A PROGRAMMING SEQUENCE
DISI
#5
MOV
MOV
MOV
MOV
BSET
NOP
NOP
#0x55, W0
W0, NVMKEY
#0xAA, W1
W1, NVMKEY
NVMCON, #WR
DS70318D-page 86
; Block all interrupts with priority <7
; for next 5 instructions
;
;
;
;
;
;
Write the 55 key
Write the AA key
Start the erase sequence
Insert two NOPs after the
erase command is asserted
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
6.0
Note:
RESETS
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 8. “Reset”
(DS70192), which is available from the
Microchip web site (www.microchip.com).
The Reset module combines all Reset sources and
controls the device Master Reset Signal, SYSRST. The
following is a list of device Reset sources:
•
•
•
•
•
•
•
•
POR: Power-on Reset
BOR: Brown-out Reset
MCLR: Master Clear Pin Reset
SWR: Software RESET Instruction
WDTO: Watchdog Timer Reset
CM: Configuration Mismatch Reset
TRAPR: Trap Conflict Reset
IOPUWR: Illegal Condition Device Reset
- Illegal Opcode Reset
- Uninitialized W Register Reset
- Security Reset
Any active source of reset will make the SYSRST
signal active. On system Reset, some of the registers
associated with the CPU and peripherals are forced to
a known Reset state and some are unaffected.
Note:
Refer to the specific peripheral section or
Section 3.0 “CPU” of this data sheet for
register Reset states.
All types of device Reset sets a corresponding status
bit in the RCON register to indicate the type of Reset
(see Register 6-1).
A POR clears all the bits, except for the POR bit
(RCON<0>), that are set. The user application can set
or clear any bit at any time during code execution. The
RCON bits only serve as status bits. Setting a particular
Reset status bit in software does not cause a device
Reset to occur.
The RCON register also has other bits associated with
the Watchdog Timer and device power-saving states.
The function of these bits is discussed in other sections
of this manual.
Note:
The status bits in the RCON register
should be cleared after they are read so
that the next RCON register value after a
device Reset is meaningful.
A simplified block diagram of the Reset module is
shown in Figure 6-1.
FIGURE 6-1:
RESET SYSTEM BLOCK DIAGRAM
RESET Instruction
Glitch Filter
MCLR
WDT
Module
Sleep or Idle
VDD
BOR
Internal
Regulator
SYSRST
VDD Rise
Detect
POR
Trap Conflict
Illegal Opcode
Uninitialized W Register
Configuration Mismatch
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 87
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
RCON: RESET CONTROL REGISTER(1)
REGISTER 6-1:
R/W-0
R/W-0
U-0
U-0
U-0
U-0
R/W-0
R/W-0
TRAPR
IOPUWR
—
—
—
—
CM
VREGS
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-1
R/W-1
EXTR
SWR
SWDTEN(2)
WDTO
SLEEP
IDLE
BOR
POR
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
TRAPR: Trap Reset Flag bit
1 = A Trap Conflict Reset has occurred
0 = A Trap Conflict Reset has not occurred
bit 14
IOPUWR: Illegal Opcode or Uninitialized W Access Reset Flag bit
1 = An illegal opcode detection, an illegal address mode or uninitialized W register used as an
Address Pointer caused a Reset
0 = An illegal opcode or uninitialized W Reset has not occurred
bit 13-10
Unimplemented: Read as ‘0’
bit 9
CM: Configuration Mismatch Flag bit
1 = A Configuration Mismatch Reset has occurred
0 = A Configuration Mismatch Reset has NOT occurred
bit 8
VREGS: Voltage Regulator Standby During Sleep bit
1 = Voltage regulator is active during Sleep
0 = Voltage regulator goes into Standby mode during Sleep
bit 7
EXTR: External Reset Pin (MCLR) bit
1 = A Master Clear (pin) Reset has occurred
0 = A Master Clear (pin) Reset has not occurred
bit 6
SWR: Software Reset Flag (Instruction) bit
1 = A RESET instruction has been executed
0 = A RESET instruction has not been executed
bit 5
SWDTEN: Software Enable/Disable of WDT bit(2)
1 = WDT is enabled
0 = WDT is disabled
bit 4
WDTO: Watchdog Timer Time-out Flag bit
1 = WDT time-out has occurred
0 = WDT time-out has not occurred
bit 3
SLEEP: Wake-up from Sleep Flag bit
1 = Device has been in Sleep mode
0 = Device has not been in Sleep mode
bit 2
IDLE: Wake-up from Idle Flag bit
1 = Device was in Idle mode
0 = Device was not in Idle mode
Note 1: All of the Reset status bits can be set or cleared in software. Setting one of these bits in software does not
cause a device Reset.
2: If the FWDTEN Configuration bit is ‘1’ (unprogrammed), the WDT is always enabled, regardless of the
SWDTEN bit setting.
DS70318D-page 88
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 6-1:
RCON: RESET CONTROL REGISTER(1) (CONTINUED)
bit 1
BOR: Brown-out Reset Flag bit
1 = A Brown-out Reset has occurred
0 = A Brown-out Reset has not occurred
bit 0
POR: Power-on Reset Flag bit
1 = A Power-up Reset has occurred
0 = A Power-up Reset has not occurred
Note 1: All of the Reset status bits can be set or cleared in software. Setting one of these bits in software does not
cause a device Reset.
2: If the FWDTEN Configuration bit is ‘1’ (unprogrammed), the WDT is always enabled, regardless of the
SWDTEN bit setting.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 89
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
6.1
2.
System Reset
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 families of devices have two types of Reset:
• Cold Reset
• Warm Reset
A cold Reset is the result of a Power-on Reset (POR)
or a Brown-out Reset (BOR). On a cold Reset, the
FNOSC Configuration bits in the FOSC Configuration
register select the device clock source.
A warm Reset is the result of all the other Reset
sources, including the RESET instruction. On warm
Reset, the device will continue to operate from the
current clock source as indicated by the Current
Oscillator Selection (COSC<2:0>) bits in the Oscillator
Control (OSCCON<14:12>) register.
The device is kept in a Reset state until the system
power supplies have stabilized at appropriate levels
and the oscillator clock is ready. The sequence in
which this occurs is detailed below and is shown in
Figure 6-2.
1.
POR Reset: A POR circuit holds the device in
Reset when the power supply is turned on. The
POR circuit is active until VDD crosses the VPOR
threshold and the delay, TPOR, has elapsed.
TABLE 6-1:
3.
4.
5.
6.
BOR Reset: The on-chip voltage regulator has
a BOR circuit that keeps the device in Reset
until VDD crosses the VBOR threshold and the
delay, TBOR, has elapsed. The delay, TBOR,
ensures that the voltage regulator output
becomes stable.
PWRT Timer: The programmable power-up
timer continues to hold the processor in Reset
for a specific period of time (TPWRT) after a
BOR. The delay TPWRT ensures that the system
power supplies have stabilized at the
appropriate level for full-speed operation. After
the delay, TPWRT, has elapsed, the SYSRST
becomes inactive, which in turn enables the
selected oscillator to start generating clock
cycles.
Oscillator Delay: The total delay for the clock to
be ready for various clock source selections is
given in Table 6-1. Refer to Section 8.0
“Oscillator Configuration” for more information.
When the oscillator clock is ready, the processor
begins execution from location 0x000000. The
user application programs a GOTO instruction at
the Reset address, which redirects program
execution to the appropriate start-up routine.
The Fail-Safe Clock Monitor (FSCM), if enabled,
begins to monitor the system clock when the
system clock is ready and the delay, TFSCM,
elapsed.
OSCILLATOR DELAY
Oscillator Mode
Oscillator
Startup Delay
Oscillator
Startup Timer
PLL Lock Time
Total Delay
FRC, FRCDIV16, FRCDIVN
TOSCD(1)
—
—
TOSCD(1)
FRCPLL
TOSCD(1)
—
TLOCK(3)
TOSCD + TLOCK(1,3)
XT
TOSCD(1)
TOST(2)
—
TOSCD + TOST(1,2)
HS
TOSCD(1)
TOST(2)
—
TOSCD + TOST(1,2)
EC
—
—
—
—
XTPLL
TOSCD(1)
TOST(2)
TLOCK(3)
TOSCD + TOST +
TLOCK(1,2,3)
HSPLL
TOSCD(1)
TOST(2)
TLOCK(3)
TOSCD + TOST +
TLOCK(1,2,3)
ECPLL
—
—
TLOCK(3)
TLOCK(3)
LPRC
TOSCD(1)
—
—
TOSCD(1)
Note 1:
2:
3:
TOSCD = Oscillator start-up delay (1.1 μs max for FRC, 70 μs max for LPRC). Crystal oscillator start-up
times vary with crystal characteristics, load capacitance, etc.
TOST = Oscillator start-up timer delay (1024 oscillator clock period). For example, TOST = 102.4 μs for a
10 MHz crystal and TOST = 32 ms for a 32 kHz crystal.
TLOCK = PLL lock time (1.5 ms nominal) if PLL is enabled.
DS70318D-page 90
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 6-2:
SYSTEM RESET TIMING
VBOR
VPOR
VDD
TPOR
POR Reset
BOR Reset
1
TBOR
2
3
TPWRT
SYSRST
4
Oscillator Clock
TOSCD
TOST
TLOCK
6
TFSCM
FSCM
5
Device Status
Reset
Run
Time
Note 1:
POR Reset: A POR circuit holds the device in Reset when the power supply is turned on. The POR circuit is
active until VDD crosses the VPOR threshold and the delay, TPOR, has elapsed.
2:
BOR Reset: The on-chip voltage regulator has a BOR circuit that keeps the device in Reset until VDD crosses
the VBOR threshold and the delay, TBOR, has elapsed. The delay, TBOR, ensures the voltage regulator output
becomes stable.
3:
PWRT Timer: The programmable power-up timer continues to hold the processor in Reset for a specific period
of time (TPWRT) after a BOR. The delay, TPWRT, ensures that the system power supplies have stabilized at the
appropriate level for full-speed operation. After the delay, TPWRT has elapsed and the SYSRST becomes
inactive, which in turn, enables the selected oscillator to start generating clock cycles.
4:
Oscillator Delay: The total delay for the clock to be ready for various clock source selections is given in
Table 6-1. Refer to Section 8.0 “Oscillator Configuration” for more information.
5:
When the oscillator clock is ready, the processor begins execution from location 0x000000. The user application
programs a GOTO instruction at the Reset address, which redirects program execution to the appropriate start-up
routine.
6:
If the Fail-Safe Clock Monitor (FSCM) is enabled, it begins to monitor the system clock when the system clock is
ready and the delay, TFSCM, has elapsed.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 91
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 6-2:
OSCILLATOR DELAY
Symbol
Parameter
Value
VPOR
POR threshold
1.8V nominal
TPOR
POR extension time
30 μs maximum
VBOR
BOR threshold
2.5V nominal
TBOR
BOR extension time
100 μs maximum
TPWRT
Programmable power-up time delay
0-128 ms nominal
TFSCM
Fail-Safe Clock Monitor delay
900 μs maximum
Note:
6.2
When the device exits the Reset
condition (begins normal operation), the
device operating parameters (voltage,
frequency, temperature, etc.) must be
within their operating ranges; otherwise,
the device may not function correctly.
The user application must ensure that
the delay between the time power is first
applied, and the time SYSRST becomes
inactive, is long enough to get all operating parameters within specification.
Power-on Reset (POR)
A Power-on Reset (POR) circuit ensures the device is
reset from power-on. The POR circuit is active until
VDD crosses the VPOR threshold and the delay, TPOR,
has elapsed. The delay, TPOR, ensures the internal
device bias circuits become stable.
The device supply voltage characteristics must meet
the specified starting voltage and rise rate
requirements to generate the POR. Refer to
Section 24.0 “Electrical Characteristics” for details.
The POR status (POR) bit in the Reset Control
(RCON<0>) register is set to indicate the Power-on
Reset.
DS70318D-page 92
6.2.1
Brown-out Reset (BOR) and
Power-up Timer (PWRT)
The on-chip regulator has a Brown-out Reset (BOR)
circuit that resets the device when the VDD is too low
(VDD < VBOR) for proper device operation. The BOR
circuit keeps the device in Reset until VDD crosses the
VBOR threshold and the delay, TBOR, has elapsed. The
delay, TBOR, ensures the voltage regulator output
becomes stable.
The BOR status (BOR) bit in the Reset Control
(RCON<1>) register is set to indicate the Brown-out
Reset.
The device will not run at full speed after a BOR as the
VDD should rise to acceptable levels for full-speed
operation. The PWRT provides power-up time delay
(TPWRT) to ensure that the system power supplies have
stabilized at the appropriate levels for full-speed
operation before the SYSRST is released.
The power-up timer delay (TPWRT) is programmed by
the
Power-on
Reset
Timer
Value
Select
(FPWRT<2:0>) bits in the POR Configuration
(FPOR<2:0>) register, which provides eight settings
(from 0 ms to 128 ms). Refer to Section 21.0 “Special
Features” for further details.
Figure 6-3 shows the typical brown-out scenarios. The
reset delay (TBOR + TPWRT) is initiated each time VDD
rises above the VBOR trip point
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 6-3:
BROWN-OUT SITUATIONS
VDD
VBOR
TBOR + TPWRT
SYSRST
VDD
VBOR
TBOR + TPWRT
SYSRST
VDD dips before PWRT expires
VDD
VBOR
TBOR + TPWRT
SYSRST
6.3
External Reset (EXTR)
The external Reset is generated by driving the MCLR
pin low. The MCLR pin is a Schmitt trigger input with an
additional glitch filter. Reset pulses that are longer than
the minimum pulse width will generate a Reset. Refer
to Section 24.0 “Electrical Characteristics” for
minimum pulse width specifications. The external
Reset (MCLR) pin (EXTR) bit in the Reset Control
(RCON) register is set to indicate the MCLR Reset.
6.3.0.1
EXTERNAL SUPERVISORY
CIRCUIT
Many systems have external supervisory circuits that
generate Reset signals to reset multiple devices in the
system. This external Reset signal can be directly
connected to the MCLR pin to reset the device when
the rest of system is reset.
6.3.0.2
INTERNAL SUPERVISORY CIRCUIT
When using the internal power supervisory circuit to
reset the device, the external Reset pin (MCLR) should
be tied directly or resistively to VDD. In this case, the
MCLR pin will not be used to generate a Reset. The
external Reset pin (MCLR) does not have an internal
pull-up and must not be left unconnected.
6.4
Software RESET Instruction (SWR)
Whenever the RESET instruction is executed, the
device will assert SYSRST, placing the device in a
special Reset state. This Reset state will not
re-initialize the clock. The clock source in effect prior to
© 2009 Microchip Technology Inc.
the RESET instruction will remain. SYSRST is released
at the next instruction cycle and the Reset vector fetch
will commence.
The Software Reset (SWR) flag (instruction) in the
Reset Control (RCON<6>) register is set to indicate
the software Reset.
6.5
Watchdog Time-out Reset (WDTO)
Whenever a Watchdog time-out occurs, the device will
asynchronously assert SYSRST. The clock source will
remain unchanged. A WDT time-out during Sleep or
Idle mode will wake-up the processor, but will not reset
the processor.
The Watchdog Timer Time-out (WDTO) flag in the
Reset Control (RCON<4>) register is set to indicate
the Watchdog Reset. Refer to Section 21.4
“Watchdog Timer (WDT)” for more information on
Watchdog Reset.
6.6
Trap Conflict Reset
If a lower priority hard trap occurs while a higher
priority trap is being processed, a hard Trap Conflict
Reset occurs. The hard traps include exceptions of priority level 13 through level 15, inclusive. The address
error (level 13) and oscillator error (level 14) traps fall
into this category.
The Trap Reset (TRAPR) flag in the Reset Control
(RCON<15>) register is set to indicate the Trap Conflict
Reset. Refer to Section 7.0 “Interrupt Controller” for
more information on Trap Conflict Resets.
Preliminary
DS70318D-page 93
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
6.7
Configuration Mismatch Reset
To maintain the integrity of the Peripheral Pin Select
Control registers, they are constantly monitored with
shadow registers in hardware. If an unexpected
change in any of the registers occur (such as cell
disturbances caused by ESD or other external events),
a Configuration Mismatch Reset occurs.
The Configuration Mismatch (CM) flag in the Reset
Control (RCON<9>) register is set to indicate the
Configuration Mismatch Reset. Refer to Section 10.0
“I/O Ports” for more information on the
Configuration Mismatch Reset.
Note:
6.8
The Configuration Mismatch Reset
feature and associated Reset flag are not
available on all devices.
Illegal Condition Device Reset
An illegal condition device Reset occurs due to the
following sources:
The Illegal Opcode or Uninitialized W Access Reset
(IOPUWR) flag in the Reset Control (RCON<14>)
register is set to indicate the illegal condition device
Reset.
ILLEGAL OPCODE RESET
A device Reset is generated if the device attempts to
execute an illegal opcode value that is fetched from
program memory.
The Illegal Opcode Reset function can prevent the
device from executing program memory sections that
are used to store constant data. To take advantage of
the Illegal Opcode Reset, use only the lower 16 bits of
TABLE 6-3:
6.8.2
UNINITIALIZED W REGISTER
RESET
Any attempt to use the uninitialized W register as an
Address Pointer will Reset the device. The W register
array (with the exception of W15) is cleared during all
Resets and is considered uninitialized until written to.
6.8.3
SECURITY RESET
If a Program Flow Change (PFC) or Vector Flow
Change (VFC) targets a restricted location in a
protected segment (boot and secure segment), that
operation will cause a Security Reset.
The PFC occurs when the program counter is reloaded
as a result of a call, jump, computed jump, return,
return from subroutine or other form of branch
instruction.
The VFC occurs when the program counter is reloaded
with an interrupt or trap vector.
• Illegal Opcode Reset
• Uninitialized W Register Reset
• Security Reset
6.8.1
each program memory section to store the data values.
The upper 8 bits should be programmed with 3Fh,
which is an illegal opcode value.
Refer to Section 21.8 “Code Protection and
CodeGuard™ Security” for more information on
Security Reset.
6.9
Using the RCON Status Bits
The user application can read the Reset Control
(RCON) register after any device Reset to determine
the cause of the Reset.
Note:
The status bits in the RCON register
should be cleared after they are read so
that the next RCON register value after a
device Reset will be meaningful.
Table 6-3 provides a summary of the Reset flag bit
operation.
RESET FLAG BIT OPERATION
Flag Bit
Set by:
Cleared by:
TRAPR (RCON<15>)
Trap conflict event
POR,BOR
IOPWR (RCON<14>)
Illegal opcode or uninitialized W register
access or Security Reset
POR,BOR
CM (RCON<9>)
Configuration Mismatch
POR,BOR
EXTR (RCON<7>)
MCLR Reset
POR
SWR (RCON<6>)
RESET instruction
POR,BOR
WDTO (RCON<4>)
WDT time-out
PWRSAV instruction, CLRWDT instruction,
POR,BOR
SLEEP (RCON<3>)
PWRSAV #SLEEP instruction
POR,BOR
IDLE (RCON<2>)
PWRSAV #IDLE instruction
POR,BOR
BOR (RCON<1>)
POR, BOR
POR (RCON<0>)
POR
Note:
All Reset flag bits can be set or cleared by user software.
DS70318D-page 94
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
7.0
Note:
7.1.1
INTERRUPT CONTROLLER
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference
Manual”,
Section
41.
“Interrupts (Part IV)” (DS70300), which
is available on the Microchip web site
(www.microchip.com).
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 interrupt controller reduces the numerous peripheral
interrupt request signals to a single interrupt request
signal
to
the
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 CPU. It has the following
features:
• Up to eight processor exceptions and software
traps
• Seven user-selectable priority levels
• Interrupt Vector Table (IVT) with up to 118 vectors
• A unique vector for each interrupt or exception
source
• Fixed priority within a specified user priority level
• Alternate Interrupt Vector Table (AIVT) for debug
support
• Fixed interrupt entry and return latencies
7.1
ALTERNATE INTERRUPT VECTOR
TABLE
The Alternate Interrupt Vector Table (AIVT) is located
after the IVT, as shown in Figure 7-1. Access to the
AIVT is provided by the ALTIVT control bit
(INTCON2<15>). If the ALTIVT bit is set, all interrupt
and exception processes use the alternate vectors
instead of the default vectors. The alternate vectors are
organized in the same manner as the default vectors.
The AIVT supports debugging by providing a means to
switch between an application and a support
environment without requiring the interrupt vectors to
be reprogrammed. This feature also enables switching
between applications for evaluation of different
software algorithms at run time. If the AIVT is not
needed, the AIVT should be programmed with the
same addresses used in the IVT.
7.2
Reset Sequence
A device Reset is not a true exception because the
interrupt controller is not involved in the Reset process.
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 device clears its registers in response to a Reset,
which forces the PC to zero. The digital signal controller
then begins program execution at location 0x000000. A
GOTO instruction at the Reset address can redirect
program execution to the appropriate start-up routine.
Note:
Interrupt Vector Table
The Interrupt Vector Table (IVT) is shown in Figure 7-1.
The IVT resides in program memory, starting at location
000004h. The IVT contains 126 vectors, consisting of
eight nonmaskable trap vectors, plus up to 118 sources
of interrupt. In general, each interrupt source has its own
vector. Each interrupt vector contains a 24-bit-wide
address. The value programmed into each interrupt
vector location is the starting address of the associated
Interrupt Service Routine (ISR).
Any unimplemented or unused vector
locations in the IVT and AIVT should be
programmed with the address of a default
interrupt handler routine that contains a
RESET instruction.
Interrupt vectors are prioritized in terms of their natural
priority. This priority is linked to their position in the
vector table. Lower addresses generally have a higher
natural priority. For example, the interrupt associated
with vector 0 will take priority over interrupts at any
other vector address.
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices implement up to 35 unique interrupts and
4 non-maskable traps. These are summarized in
Table 7-1.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 95
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Decreasing Natural Order Priority
FIGURE 7-1:
Note 1:
DS70318D-page 96
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 INTERRUPT VECTOR
TABLE
Reset – GOTO Instruction
Reset – GOTO Address
Reserved
Oscillator Fail Trap Vector
Address Error Trap Vector
Stack Error Trap Vector
Math Error Trap Vector
Reserved
Reserved
Reserved
Interrupt Vector 0
Interrupt Vector 1
~
~
~
Interrupt Vector 52
Interrupt Vector 53
Interrupt Vector 54
~
~
~
Interrupt Vector 116
Interrupt Vector 117
Reserved
Reserved
Reserved
Oscillator Fail Trap Vector
Address Error Trap Vector
Stack Error Trap Vector
Math Error Trap Vector
Reserved
Reserved
Reserved
Interrupt Vector 0
Interrupt Vector 1
~
~
~
Interrupt Vector 52
Interrupt Vector 53
Interrupt Vector 54
~
~
~
Interrupt Vector 116
Interrupt Vector 117
Start of Code
0x000000
0x000002
0x000004
0x000014
0x00007C
0x00007E
0x000080
Interrupt Vector Table (IVT)(1)
0x0000FC
0x0000FE
0x000100
0x000102
0x000114
Alternate Interrupt Vector Table (AIVT)(1)
0x00017C
0x00017E
0x000180
0x0001FE
0x000200
See Table 7-1 for the list of implemented interrupt vectors.
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 7-1:
INTERRUPT VECTORS
Vector
Number
Interrupt
Request
(IQR)
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38-64
65
66-72
73
74-101
102
103
104
105
106
107
108
109
110
111
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30-56
57
58-64
65
66-93
94
95
96
97
98
99
100
101
102
103
© 2009 Microchip Technology Inc.
IVT Address
AIVT Address
Interrupt Source
Highest Natural Order Priority
0x000014
0x000114
INT0 – External Interrupt 0
0x000016
0x000116
IC1 – Input Capture 1
0x000018
0x000118
OC1 – Output Compare 1
0x00001A
0x00011A
T1 – Timer1
0x00001C
0x00011C
Reserved
0x00001E
0x00011E
IC2 – Input Capture 2
0x000020
0x000120
OC2 – Output Compare 2
0x000022
0x000122
T2 – Timer2
0x000024
0x000124
T3 – Timer3
0x000026
0x000126
SPI1E – SPI1 Fault
0x000028
0x000128
SPI1 – SPI1 Transfer Done
0x00002A
0x00012A
U1RX – UART1 Receiver
0x00002C
0x00012C
U1TX – UART1 Transmitter
0x00002E
0x00012E
ADC – ADC Group Convert Done
0x000030
0x000130
Reserved
0x000032
0x000132
Reserved
0x000034
0x000134
SI2C1 – I2C1 Slave Event
0x000036
0x000136
MI2C1 – I2C1 Master Event
0x000038
0x000138
CMP1 – Analog Comparator 1 Interrupt
0x00003A
0x00013A
CN – Input Change Notification Interrupt
0x00003C
0x00013C
INT1 – External Interrupt 1
0x00003E
0x00013E
Reserved
0x000040
0x000140
Reserved
0x000042
0x000142
Reserved
0x000044
0x000144
Reserved
0x000046
0x000146
Reserved
0x000048
0x000148
Reserved
0x00004A
0x00014A
Reserved
0x00004C
0x00014C
Reserved
0x00004E
0x00014E
INT2 – External Interrupt 2
Reserved
0x000086
0x000186
PWM PSEM Special Event Match
Reserved
0x000096
0x000196
U1E – UART1 Error Interrupt
Reserved
0x0000D0
0x0001D0
PWM1 – PWM1 Interrupt
0x0000D2
0x0001D2
PWM2 – PWM2 Interrupt
0x0000D4
0x0001D4
PWM3 – PWM3 Interrupt
0x0000D6
0x0001D6
PWM4 – PWM4 Interrupt
0x0000D8
0x0001D8
Reserved
0x0000DA
0x0001DA
Reserved
0x0000DC
0x0001DC
Reserved
0x0000DE
0x0001DE
Reserved
0x0000E0
0x0001E0
Reserved
0x0000E2
0x00001E2
CMP2 – Analog Comparator 2
Preliminary
DS70318D-page 97
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 7-1:
INTERRUPT VECTORS (CONTINUED)
Vector
Number
Interrupt
Request
(IQR)
112
113
114
115
116
117
118
119
120
121
122
123
124
125
104
105
106
107
108
109
110
111
112
113
114
115
116
117
DS70318D-page 98
IVT Address
AIVT Address
Interrupt Source
0x0000E4
0x0001E4
CMP3 – Analog Comparator 3
0x0000E6
0x0001E6
CMP4 – Analog Comparator 4
0x0000E8
0x0001E8
Reserved
0x0000EA
0x0001EA
Reserved
0x0000EC
0x0001EC
Reserved
0x0000EE
0x0001EE
Reserved
0x0000F0
0x0001F0
ADC Pair 0 Convert Done
0x0000F2
0x0001F2
ADC Pair 1 Convert Done
0x0000F4
0x0001F4
ADC Pair 2 Convert Done
0x0000F6
0x0001F6
ADC Pair 3 Convert Done
0x0000F8
0x0001F8
ADC Pair 4 Convert Done
0x0000FA
0x0001FA
ADC Pair 5 Convert Done
0x0000FC
0x0001FC
ADC Pair 6 Convert Done
0x0000FE
0x0001FE
Reserved
Lowest Natural Order Priority
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
7.3
7.3.5
Interrupt Control and Status
Registers
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices implement 27 registers for the interrupt
controller:
•
•
•
•
•
•
INTCON1
INTCON2
IFSx
IECx
IPCx
INTTREG
7.3.1
INTCON1 AND INTCON2
Global interrupt control functions are controlled from
INTCON1 and INTCON2. INTCON1 contains the
Interrupt Nesting Disable (NSTDIS) bit as well as the
control and status flags for the processor trap sources.
The INTCON2 register controls the external interrupt
request signal behavior and the use of the Alternate
Interrupt Vector Table.
7.3.2
IFSx
The IFSx registers maintain all of the interrupt request
flags. Each source of interrupt has a status bit, which is
set by the respective peripherals or external signal and
is cleared via software.
7.3.3
IECx
The IECx registers maintain all of the interrupt enable
bits. These control bits are used to individually enable
interrupts from the peripherals or external signals.
7.3.4
IPCx
INTTREG
The INTTREG register contains the associated
interrupt vector number and the new CPU Interrupt
priority Level, which are latched into the Vector Number
(VECNUM<6:0>) and Interrupt Level (ILR<3:0>) bit
fields in the INTTREG register. The new Interrupt
Priority Level is the priority of the pending interrupt.
The interrupt sources are assigned to the IFSx, IECx
and IPCx registers in the same sequence that they are
listed in Table 7-1. For example, the INT0 (External
Interrupt 0) is shown as having vector number 8 and a
natural order priority of 0. Thus, the INT0IF bit is found
in IFS0<0>, the INT0IE bit is found in IEC0<0> and the
INT0IP bits are found in the first position of IPC0
(IPC0<2:0>).
7.3.6
STATUS/CONTROL REGISTERS
Although they are not specifically part of the interrupt
control hardware, two of the CPU Control registers
contain bits that control interrupt functionality.
• The CPU STATUS register, SR, contains the
IPL<2:0> bits (SR<7:5>). These bits indicate the
current CPU interrupt Priority Level. The user can
change the current CPU priority level by writing to
the IPL bits.
• The CORCON register contains the IPL3 bit,
which together with IPL<2:0>, indicates the
current CPU priority level. IPL3 is a read-only bit
so that trap events cannot be masked by the user
software.
All Interrupt registers are described in Register 7-1
through Register 7-35 in the following pages.
The IPCx registers are used to set the Interrupt Priority
Level for each source of interrupt. Each user interrupt
source can be assigned to one of eight priority levels.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 99
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
SR: CPU STATUS REGISTER(1)
REGISTER 7-1:
R-0
R-0
R/C-0
R/C-0
R-0
R/C-0
R -0
R/W-0
OA
OB
SA
SB
OAB
SAB
DA
DC
bit 15
bit 8
R/W-0(3)
IPL2
R/W-0(3)
(2)
IPL1
(2)
R/W-0(3)
IPL0
(2)
R-0
R/W-0
R/W-0
R/W-0
R/W-0
RA
N
OV
Z
C
bit 7
bit 0
Legend:
C = Clearable bit
R = Readable bit
U = Unimplemented bit, read as ‘0’
S = Settable bit
W = Writable bit
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
IPL<2:0>: CPU Interrupt Priority Level Status bits(2)
111 = CPU Interrupt Priority Level is 7 (15), user interrupts disabled
110 = CPU Interrupt Priority Level is 6 (14)
101 = CPU Interrupt Priority Level is 5 (13)
100 = CPU Interrupt Priority Level is 4 (12)
011 = CPU Interrupt Priority Level is 3 (11)
010 = CPU Interrupt Priority Level is 2 (10)
001 = CPU Interrupt Priority Level is 1 (9)
000 = CPU Interrupt Priority Level is 0 (8)
bit 7-5
Note 1: For complete register details, see Register 3-1.
2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority
Level. The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when
IPL<3> = 1.
3: The IPL<2:0> status bits are read-only when NSTDIS (INTCON1<15>) = 1.
REGISTER 7-2:
CORCON: CORE CONTROL REGISTER(1)
U-0
—
bit 15
U-0
—
R/W-0
SATA
bit 7
R/W-0
SATB
U-0
US
R/W-0
EDT
R-0
R-0
DL<2:0>
R-0
bit 8
Legend:
R = Readable bit
0’ = Bit is cleared
bit 3
U-0
—
R/W-1
SATDW
R/W-0
ACCSAT
C = Clearable bit
W = Writable bit
‘x = Bit is unknown
R/C-0
IPL3(2)
R/W-0
PSV
R/W-0
RND
R/W-0
IF
bit 0
-n = Value at POR
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
IPL3: CPU Interrupt Priority Level Status bit 3(2)
1 = CPU Interrupt Priority Level is greater than 7
0 = CPU Interrupt Priority Level is 7 or less
Note 1: For complete register details, see Register 3-2.
2: The IPL3 bit is concatenated with the IPL<2:0> bits (SR<7:5>) to form the CPU Interrupt Priority Level.
DS70318D-page 100
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-3:
INTCON1: INTERRUPT CONTROL REGISTER 1
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
NSTDIS
OVAERR
OVBERR
COVAERR
COVBERR
OVATE
OVBTE
COVTE
bit 15
bit 8
R/W-0
R/W-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
U-0
SFTACERR
DIV0ERR
—
MATHERR
ADDRERR
STKERR
OSCFAIL
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
NSTDIS: Interrupt Nesting Disable bit
1 = Interrupt nesting is disabled
0 = Interrupt nesting is enabled
bit 14
OVAERR: Accumulator A Overflow Trap Flag bit
1 = Trap was caused by overflow of Accumulator A
0 = Trap was not caused by overflow of Accumulator A
bit 13
OVBERR: Accumulator B Overflow Trap Flag bit
1 = Trap was caused by overflow of Accumulator B
0 = Trap was not caused by overflow of Accumulator B
bit 12
COVAERR: Accumulator A Catastrophic Overflow Trap Flag bit
1 = Trap was caused by catastrophic overflow of Accumulator A
0 = Trap was not caused by catastrophic overflow of Accumulator A
bit 11
COVBERR: Accumulator B Catastrophic Overflow Trap Flag bit
1 = Trap was caused by catastrophic overflow of Accumulator B
0 = Trap was not caused by catastrophic overflow of Accumulator B
bit 10
OVATE: Accumulator A Overflow Trap Enable bit
1 = Trap overflow of Accumulator A
0 = Trap disabled
bit 9
OVBTE: Accumulator B Overflow Trap Enable bit
1 = Trap overflow of Accumulator B
0 = Trap disabled
bit 8
COVTE: Catastrophic Overflow Trap Enable bit
1 = Trap on catastrophic overflow of Accumulator A or B enabled
0 = Trap disabled
bit 7
SFTACERR: Shift Accumulator Error Status bit
1 = Math error trap was caused by an invalid accumulator shift
0 = Math error trap was not caused by an invalid accumulator shift
bit 6
DIV0ERR: Arithmetic Error Status bit
1 = Math error trap was caused by a divide by zero
0 = Math error trap was not caused by a divide by zero
bit 5
Unimplemented: Read as ‘0’
bit 4
MATHERR: Arithmetic Error Status bit
1 = Math error trap has occurred
0 = Math error trap has not occurred
bit 3
ADDRERR: Address Error Trap Status bit
1 = Address error trap has occurred
0 = Address error trap has not occurred
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 101
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-3:
INTCON1: INTERRUPT CONTROL REGISTER 1 (CONTINUED)
bit 2
STKERR: Stack Error Trap Status bit
1 = Stack error trap has occurred
0 = Stack error trap has not occurred
bit 1
OSCFAIL: Oscillator Failure Trap Status bit
1 = Oscillator failure trap has occurred
0 = Oscillator failure trap has not occurred
bit 0
Unimplemented: Read as ‘0’
DS70318D-page 102
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-4:
INTCON2: INTERRUPT CONTROL REGISTER 2
R/W-0
R-0
U-0
U-0
U-0
U-0
U-0
U-0
ALTIVT
DISI
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
R/W-0
R/W-0
R/W-0
—
—
—
—
—
INT2EP
INT1EP
INT0EP
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
ALTIVT: Enable Alternate Interrupt Vector Table bit
1 = Use alternate vector table
0 = Use standard (default) vector table
bit 14
DISI: DISI Instruction Status bit
1 = DISI instruction is active
0 = DISI instruction is not active
bit 13-3
Unimplemented: Read as ‘0’
bit 2
INT2EP: External Interrupt 2 Edge Detect Polarity Select bit
1 = Interrupt on negative edge
0 = Interrupt on positive edge
bit 1
INT1EP: External Interrupt 1 Edge Detect Polarity Select bit
1 = Interrupt on negative edge
0 = Interrupt on positive edge
bit 0
INT0EP: External Interrupt 0 Edge Detect Polarity Select bit
1 = Interrupt on negative edge
0 = Interrupt on positive edge
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 103
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-5:
IFS0: INTERRUPT FLAG STATUS REGISTER 0
U-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
—
—
ADIF
U1TXIF
U1RXIF
SPI1IF
SPI1EIF
T3IF(1,2)
bit 15
bit 8
R/W-0
R/W-0
R/W-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
T2IF(1,2)
OC2IF(1,2)
IC2IF
—
T1IF
OC1IF
IC1IF(1)
INT0IF
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-14
Unimplemented: Read as ‘0’
bit 13
ADIF: ADC Group Conversion Complete Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 12
U1TXIF: UART1 Transmitter Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 11
U1RXIF: UART1 Receiver Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 10
SPI1IF: SPI1 Event Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 9
SPI1EIF: SPI1 Fault Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 8
T3IF: Timer3 Interrupt Flag Status bit(1,2)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 7
T2IF: Timer2 Interrupt Flag Status bit(1,2)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 6
OC2IF: Output Compare Channel 2 Interrupt Flag Status bit(1,2)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 5
IC2IF: Input Capture Channel 2 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 4
Unimplemented: Read as ‘0’
bit 3
T1IF: Timer1 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
x = Bit is unknown
Note 1: This bit is not implemented in dsPIC33FJ06GS101/102 devices.
2: These bits are not implemented in dsPIC33FJ06GS202 devices.
DS70318D-page 104
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-5:
IFS0: INTERRUPT FLAG STATUS REGISTER 0 (CONTINUED)
bit 2
OC1IF: Output Compare Channel 1 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 1
IC1IF: Input Capture Channel 1 Interrupt Flag Status bit(1)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 0
INT0IF: External Interrupt 0 Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
Note 1: This bit is not implemented in dsPIC33FJ06GS101/102 devices.
2: These bits are not implemented in dsPIC33FJ06GS202 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 105
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-6:
IFS1: INTERRUPT FLAG STATUS REGISTER 1
U-0
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
—
—
INT2IF
—
—
—
—
—
bit 15
bit 8
U-0
U-0
—
—
U-0
—
R/W-0
INT1IF
R/W-0
CNIF
R/W-0
AC1IF
(1)
R/W-0
R/W-0
MI2C1IF
SI2C1IF
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-14
Unimplemented: Read as ‘0’
bit 13
INT2IF: External Interrupt 2 Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 12-5
Unimplemented: Read as ‘0’
bit 4
INT1IF: External Interrupt 1 Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 3
CNIF: Input Change Notification Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 2
AC1IF: Analog Comparator 1 Interrupt Flag Status bit(1)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 1
MI2C1IF: I2C1 Master Events Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 0
SI2C1IF: I2C1 Slave Events Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
x = Bit is unknown
Note 1: This bit is not implemented in dsPIC33FJ16GS402/404 and dsPIC33FJ06GS101/102 devices.
DS70318D-page 106
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-7:
IFS3: INTERRUPT FLAG STATUS REGISTER 3
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
U-0
—
—
—
—
—
—
PSEMIF
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-10
Unimplemented: Read as ‘0’
bit 9
PSEMIF: PWM Special Event Match Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 8-0
Unimplemented: Read as ‘0’
REGISTER 7-8:
x = Bit is unknown
IFS4: INTERRUPT FLAG STATUS REGISTER 4
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
U-0
—
—
—
—
—
—
U1EIF
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-2
Unimplemented: Read as ‘0’
bit 1
U1EIF: UART1 Error Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 0
Unimplemented: Read as ‘0’
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 107
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-9:
IFS5: INTERRUPT FLAG STATUS REGISTER 5
R/W-0
R/W-0
U-0
U-0
U-0
U-0
U-0
U-0
PWM2IF(1)
PWM1IF
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
PWM2IF: PWM2 Interrupt Flag Status bit(1)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 14
PWM1IF: PWM1 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 13-0
Unimplemented: Read as ‘0’
x = Bit is unknown
Note 1: This bit is not implemented in dsPIC33FJ06GS101/102 devices.
DS70318D-page 108
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-10:
R/W-0
IFS6: INTERRUPT FLAG STATUS REGISTER 6
R/W-0
ADCP1IF
ADCP0IF
U-0
—
U-0
U-0
—
—
U-0
—
R/W-0
AC4IF
(1,2)
R/W-0
AC3IF(1,2)
bit 15
bit 8
R/W-0
U-0
(2)
—
AC2IF
U-0
—
U-0
U-0
—
—
U-0
—
R/W-0
PWM4IF
(1,3)
R/W-0
PWM3IF(4)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
ADCP1IF: ADC Pair 1 Conversion Done Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 14
ADCP0IF: ADC Pair 0 Conversion Done Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 13-10
Unimplemented: Read as ‘0’
bit 9
AC4IF: Analog Comparator 4 Interrupt Flag Status bit(1,2)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 8
AC3IF: Analog Comparator 3 Interrupt Flag Status bit(1,2)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 7
AC2IF: Analog Comparator 2 Interrupt Flag Status bit(2)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 6-2
Unimplemented: Read as ‘0’
bit 1
PWM4IF: PWM4 Interrupt Flag Status bit(1,3)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 0
PWM3IF: PWM3 Interrupt Flag Status bit(4)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
x = Bit is unknown
Note 1: These bits are unimplemented in dsPIC33FJ06GS202 devices.
2: These bits are unimplemented in dsPIC33FJ06GS101 and dsPIC33FJ16GS502 devices.
3: These bits are unimplemented in dsPIC33FJ16GS402/404/502 devices.
4: These bits are unimplemented in dsPIC33FJ06101/102/202 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 109
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-11:
IFS7: INTERRUPT FLAG STATUS REGISTER 7
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
—
—
U-0
—
R/W-0
ADCP6IF
R/W-0
ADCP5IF
R/W-0
(1)
ADCP4IF
R/W-0
(1)
ADCP3IF
R/W-0
(2)
ADCP2IF(3)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-5
Unimplemented: Read as ‘0’
bit 4
ADCP6IF: ADC Pair 6 Conversion Done Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 3
ADCP5IF: ADC Pair 5 Conversion Done Interrupt Flag Status bit(1)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 2
ADCP4IF: ADC Pair 4 Conversion Done Interrupt Flag Status bit(1)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 1
ADCP3IF: ADC Pair 3 Conversion Done Interrupt Flag Status bit(2)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 0
ADCP2IF: ADC Pair 2 Conversion Done Interrupt Flag Status bit(3)
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS101/102/202 and dsPIC33FJ16GS402/402/502
devices.
2: This bit is not implemented in dsPIC33FJ06GS102/202 devices.
3: This bit is not implemented in dsPIC33FJ06GS101 devices.
DS70318D-page 110
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-12:
IEC0: INTERRUPT ENABLE CONTROL REGISTER 0
U-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
—
—
ADIE
U1TXIE
U1RXIE
SPI1IE
SPI1EIE
T3IE(1,2)
bit 15
bit 8
R/W-0
R/W-0
R/W-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
T2IE
OC2IE(1,2)
IC2IE(1,2)
—
T1IE
OC1IE
IC1IE(1)
INT0IE
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-14
Unimplemented: Read as ‘0’
bit 13
ADIE: ADC1 Conversion Complete Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 12
U1TXIE: UART1 Transmitter Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 11
U1RXIE: UART1 Receiver Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 10
SPI1IE: SPI1 Event Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 9
SPI1EIE: SPI1 Event Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 8
T3IE: Timer3 Interrupt Enable bit(1,2)
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 7
T2IE: Timer2 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 6
OC2IE: Output Compare Channel 2 Interrupt Enable bit(1,2)
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 5
IC2IE: Input Capture Channel 2 Interrupt Enable bit(1,2)
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 4
Unimplemented: Read as ‘0’
bit 3
T1IE: Timer1 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
x = Bit is unknown
Note 1: These bits are unimplemented in dsPIC33FJ06GS101/102 devices.
2: These bits are unimplemented in dsPIC33FJ06GS202 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 111
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-12:
IEC0: INTERRUPT ENABLE CONTROL REGISTER 0 (CONTINUED)
bit 2
OC1IE: Output Compare Channel 1 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 1
IC1IE: Input Capture Channel 1 Interrupt Enable bit(1)
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 0
INT0IE: External Interrupt 0 Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
Note 1: These bits are unimplemented in dsPIC33FJ06GS101/102 devices.
2: These bits are unimplemented in dsPIC33FJ06GS202 devices.
DS70318D-page 112
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-13:
IEC1: INTERRUPT ENABLE CONTROL REGISTER 1
U-0
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
—
—
INT2IE
—
—
—
—
—
bit 15
bit 8
U-0
U-0
—
—
U-0
—
R/W-0
INT1IE
R/W-0
CNIE
R/W-0
(1)
AC1IE
R/W-0
R/W-0
MI2C1IE
SI2C1IE
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-14
Unimplemented: Read as ‘0’
bit 13
INT2IE: External Interrupt 2 Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 12-5
Unimplemented: Read as ‘0’
bit 4
INT1IE: External Interrupt 1 Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 3
CNIE: Input Change Notification Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 2
AC1IE: Analog Comparator 1 Interrupt Enable bit(1)
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 1
MI2C1IE: I2C1 Master Events Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 0
SI2C1IE: I2C1 Slave Events Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
x = Bit is unknown
Note 1: This bit is not implemented in dsPIC33FJ06GS101/102 and dsPIC33FJ16GS402/404 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 113
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-14:
IEC3: INTERRUPT ENABLE CONTROL REGISTER 3
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
U-0
—
—
—
—
—
—
PSEMIE
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-10
Unimplemented: Read as ‘0’
bit 9
PSEMIE: PWM Special Event Match Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 8-0
Unimplemented: Read as ‘0’
REGISTER 7-15:
x = Bit is unknown
IEC4: INTERRUPT ENABLE CONTROL REGISTER 4
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
U-0
—
—
—
—
—
—
U1EIE
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-2
Unimplemented: Read as ‘0’
bit 1
U1EIE: UART1 Error Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 0
Unimplemented: Read as ‘0’
DS70318D-page 114
Preliminary
x = Bit is unknown
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-16:
R/W-0
(1)
PWM2IE
IEC5: INTERRUPT ENABLE CONTROL REGISTER 5
R/W-0
U-0
U-0
U-0
U-0
U-0
U-0
PWM1IE
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
PWM2IE: PWM2 Interrupt Enable bit(1)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 14
PWM1IE: PWM1 Interrupt Enable bit
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 13-0
Unimplemented: Read as ‘0’
x = Bit is unknown
Note 1: This bit is unimplemented in dsPIC33FJ06GS101/102 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 115
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-17:
R/W-0
IEC6: INTERRUPT ENABLE CONTROL REGISTER 6
R/W-0
ADCP1IE
ADCP0IE
U-0
—
U-0
—
U-0
—
U-0
—
R/W-0
(1,2)
AC4IE
R/W-0
AC3IE(1,2)
bit 15
bit 8
R/W-0
U-0
(2)
—
AC2IE
U-0
—
U-0
—
U-0
—
U-0
—
R/W-0
(1,3)
PWM4IE
R/W-0
PWM3IE(4)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
ADCP1IE: ADC Pair 1 Conversion Done Interrupt Enable bit
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 14
ADCP0IE: ADC Pair 0 Conversion Done Interrupt Enable bit
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 13-10
Unimplemented: Read as ‘0
bit 9
AC4IE: Analog Comparator 4 Interrupt Enable bit(1,2)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 8
AC3IE: Analog Comparator 3 Interrupt Enable bit(1,2)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 7
AC2IE: Analog Comparator 2 Interrupt Enable bit(2)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 6-2
Unimplemented: Read as ‘0’
bit 1
PWM4IE: PWM4 Interrupt Enable bit(1,3)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 0
PWM3IE: PWM3 Interrupt Enable bit(4)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
x = Bit is unknown
Note 1: These bits are unimplemented in dsPIC33FJ06GS202 devices.
2: These bits are unimplemented in dsPIC33FJ06GS101 and dsPIC33FJ16GS502 devices.
3: These bits are unimplemented in dsPIC33FJ16GS402/404/502 devices.
4: These bits are unimplemented in dsPIC33FJ06101/102/202 devices.
DS70318D-page 116
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-18:
IEC7: INTERRUPT ENABLE CONTROL REGISTER 7
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
—
—
—
R/W-0
R/W-0
ADCP6IE(3) ADCP5IE(1)
R/W-0
R/W-0
R/W-0
ADCP4IE(1)
ADCP3IE(2)
ADCP2IE(3)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-5
Unimplemented: Read as ‘0’
bit 4
ADCP6IE: ADC Pair 6 Conversion Done Interrupt Enable bit(3)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit
ADCP5IE: ADC Pair 5 Conversion Done Interrupt Enable bit(1)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit
ADCP4IE: ADC Pair 4 Conversion Done Interrupt Enable bit(1)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit
ADCP3IE: ADC Pair 3 Conversion Done Interrupt Enable bit(2)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit
ADCP2IE: ADC Pair 2 Conversion Done Interrupt Enable bit(3)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS101/102/202 and dsPIC33FJ16GS402/402/502
devices.
2: This bit is not implemented in dsPIC33FJ06GS102/202 devices.
3: This bit is not implemented in dsPIC33FJ06GS101 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 117
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-19:
U-0
IPC0: INTERRUPT PRIORITY CONTROL REGISTER 0
R/W-1
—
R/W-0
R/W-0
T1IP<2:0>
U-0
R/W-1
—
R/W-0
R/W-0
OC1IP<2:0>
bit 15
bit 8
U-0
R/W-1
R/W-0
IC1IP<2:0>(1)
—
R/W-0
U-0
R/W-1
—
R/W-0
R/W-0
INT0IP<2:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
Unimplemented: Read as ‘0’
bit 14-12
T1IP<2:0>: Timer1 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11
Unimplemented: Read as ‘0’
bit 10-8
OC1IP<2:0>: Output Compare Channel 1 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7
Unimplemented: Read as ‘0’
bit 6-4
IC1IP<2:0>: Input Capture Channel 1 Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3
Unimplemented: Read as ‘0’
bit 2-0
INT0IP<2:0>: External Interrupt 0 Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
x = Bit is unknown
Note 1: These bits are unimplemented in dsPIC33FJ06GS101/102 devices.
DS70318D-page 118
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-20:
U-0
IPC1: INTERRUPT PRIORITY CONTROL REGISTER 1
R/W-1
R/W-0
—
R/W-0
T2IP<2:0>
U-0
R/W-1
R/W-0
R/W-0
OC2IP<2:0>(1)
—
bit 15
bit 8
U-0
R/W-1
R/W-0
IC2IP<2:0>(1,2)
—
R/W-0
U-0
U-0
U-0
U-0
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
Unimplemented: Read as ‘0’
bit 14-12
T2IP<2:0>: Timer2 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11
Unimplemented: Read as ‘0’
bit 10-8
OC2IP<2:0>: Output Compare Channel 2 Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7
Unimplemented: Read as ‘0’
bit 6-4
IC2IP<2:0>: Input Capture Channel 2 Interrupt Priority bits(1,2)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3-0
Unimplemented: Read as ‘0’
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS101/202 devices.
2: These bits are not implemented in dsPIC33FJ06GS102 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 119
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-21:
U-0
IPC2: INTERRUPT PRIORITY CONTROL REGISTER 2
R/W-1
—
R/W-0
R/W-0
U1RXIP<2:0>
U-0
R/W-1
—
R/W-0
R/W-0
SPI1IP<2:0>
bit 15
bit 8
U-0
R/W-1
—
R/W-0
SPI1EIP<2:0>
R/W-0
U-0
R/W-1
—
R/W-0
R/W-0
T3IP<2:0>(1)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
Unimplemented: Read as ‘0’
bit 14-12
U1RXIP<2:0>: UART1 Receiver Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11
Unimplemented: Read as ‘0’
bit 10-8
SPI1IP<2:0>: SPI1 Event Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7
Unimplemented: Read as ‘0’
bit 6-4
SPI1EIP<2:0>: SPI1 Error Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3
Unimplemented: Read as ‘0’
bit 2-0
T3IP<2:0>: Timer3 Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS101/102/202 devices.
DS70318D-page 120
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-22:
IPC3: INTERRUPT PRIORITY CONTROL REGISTER 3
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
R/W-1
—
R/W-0
ADIP<2:0>
R/W-0
U-0
R/W-1
—
R/W-0
R/W-0
U1TXIP<2:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-7
Unimplemented: Read as ‘0’
bit 6-4
ADIP<2:0>: ADC1 Conversion Complete Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3
Unimplemented: Read as ‘0’
bit 2-0
U1TXIP<2:0>: UART1 Transmitter Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 121
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-23:
U-0
IPC4: INTERRUPT PRIORITY CONTROL REGISTER 4
R/W-1
—
R/W-0
R/W-0
CNIP<2:0>
U-0
R/W-1
R/W-0
R/W-0
AC1IP<2:0>(1)
—
bit 15
bit 8
U-0
R/W-1
—
R/W-0
MI2C1IP<2:0>
R/W-0
U-0
—
R/W-1
R/W-0
R/W-0
SI2C1IP<2:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
Unimplemented: Read as ‘0’
bit 14-12
CNIP<2:0>: Change Notification Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11
Unimplemented: Read as ‘0’
bit 10-8
AC1IP<2:0>: Analog Comparator 1 Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7
Unimplemented: Read as ‘0’
bit 6-4
MI2C1IP<2:0>: I2C1 Master Events Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3
Unimplemented: Read as ‘0’
bit 2-0
SI2C1IP<2:0>: I2C1 Slave Events Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS101/102 and dsPIC33FJ16GS402/404 devices.
DS70318D-page 122
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-24:
IPC5: INTERRUPT PRIORITY CONTROL REGISTER 5
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
R/W-1
R/W-0
R/W-0
INT1IP<2:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-3
Unimplemented: Read as ‘0’
bit 2-0
INT1IP<2:0>: External Interrupt 1 Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
REGISTER 7-25:
x = Bit is unknown
IPC7: INTERRUPT PRIORITY CONTROL REGISTER 7
U-0
U-1
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
R/W-1
—
R/W-0
INT2IP<2:0>
R/W-0
U-0
U-0
U-0
U-0
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-7
Unimplemented: Read as ‘0’
bit 6-4
INT2IP<2:0>: External Interrupt 2 Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3-0
Unimplemented: Read as ‘0’
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 123
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-26:
IPC14: INTERRUPT PRIORITY CONTROL REGISTER 14
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
R/W-1
—
R/W-0
R/W-0
PSEMIP<2:0>
U-0
U-0
U-0
U-0
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-7
Unimplemented: Read as ‘0’
bit 6-4
PSEMIP<2:0>: PWM Special Event Match Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3-0
Unimplemented: Read as ‘0’
REGISTER 7-27:
IPC16: INTERRUPT PRIORITY CONTROL REGISTER 16
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
R/W-1
—
R/W-0
U1EIP<2:0>
R/W-0
U-0
U-0
U-0
U-0
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-7
Unimplemented: Read as ‘0’
bit 6-4
U1EIP<2:0>: UART1 Error Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3-0
Unimplemented: Read as ‘0’
DS70318D-page 124
Preliminary
x = Bit is unknown
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-28:
U-0
IPC23: INTERRUPT PRIORITY CONTROL REGISTER 23
R/W-1
R/W-0
R/W-0
U-0
PWM2IP(1)
—
R/W-1
—
R/W-0
R/W-0
PWM1IP<2:0>
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
Unimplemented: Read as ‘0’
bit 14-12
PWM2IP<2:0>: PWM2 Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11
Unimplemented: Read as ‘0’
bit 10-8
PWM1IP<2:0>: PWM1 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7-0
Unimplemented: Read as ‘0’
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS101/102 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 125
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-29:
IPC24: INTERRUPT PRIORITY CONTROL REGISTER 24
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
R/W-1
R/W-0
R/W-0
U-0
(1)
—
PWM4IP
R/W-1
—
R/W-0
PWM3IP<2:0>
R/W-0
(2)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-7
Unimplemented: Read as ‘0’
bit 6-4
PWM4IP<2:0>: PWM4 Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3
Unimplemented: Read as ‘0’
bit 2-0
PWM3IP<2:0>: PWM3 Interrupt Priority bits(2)
111 = Interrupt is priority 7 (highest priority)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS202 and dsPIC33FJ16GS402/404 devices.
2: These bits are not implemented in dsPIC33FJ06101/102/202 devices.
DS70318D-page 126
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-30:
U-0
IPC25: INTERRUPT PRIORITY CONTROL REGISTER 25
R/W-1
—
R/W-0
AC2IP<2:0>
R/W-0
(1)
U-0
U-0
U-0
U-0
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
Unimplemented: Read as ‘0’
bit 14-12
AC2IP<2:0>: Analog Comparator 2 Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11-01
Unimplemented: Read as ‘0’
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS101/102 and dsPIC33FJ16GS402/404 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 127
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-31:
IPC26: INTERRUPT PRIORITY CONTROL REGISTER 26
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
R/W-1
R/W-0
AC4IP<2:0>(1)
—
R/W-0
U-0
R/W-1
—
R/W-0
R/W-0
AC3IP<2:0>(1,2)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-7
Unimplemented: Read as ‘0’
bit 6-4
AC4IP<2:0>: Analog Comparator 4 Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3
Unimplemented: Read as ‘0’
bit 2-0
AC3IP<2:0>: Analog Comparator 3 Interrupt Priority bits(1,2)
111 = Interrupt is priority 7 (highest priority)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS202 and dsPIC33FJ16GS402/404 devices.
2: These bits are not implemented in dsPIC33FJ06GS101/102 devices.
DS70318D-page 128
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-32:
U-0
IPC27: INTERRUPT PRIORITY CONTROL REGISTER 27
R/W-1
—
R/W-0
R/W-0
ADCP1IP<2:0>
U-0
R/W-1
—
R/W-0
R/W-0
ADCP0IP<2:0>
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
Unimplemented: Read as ‘0’
bit 14-12
ADCP1IP<2:0>: ADC Pair 1 Conversion Done Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11
Unimplemented: Read as ‘0’
bit 10-8
ADCP0IP<2:0>: ADC Pair 0 Conversion Done Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7-0
Unimplemented: Read as ‘0’
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 129
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-33:
U-0
IPC28: INTERRUPT PRIORITY CONTROL REGISTER 28
R/W-1
R/W-0
R/W-0
ADCP5IP<2:0>(4)
—
U-0
R/W-1
R/W-0
R/W-0
ADCP4IP<2:0>(4)
—
bit 15
bit 8
U-0
R/W-1
—
R/W-0
ADCP3IP<2:0>
R/W-0
(2,3)
U-0
R/W-1
—
R/W-0
ADCP2IP<2:0>
R/W-0
(1)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
Unimplemented: Read as ‘0’
bit 14-12
ADCP5IP<2:0>: ADC Pair 5 Conversion Done Interrupt Priority bits(4)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11
Unimplemented: Read as ‘0’
bit 10-8
ADCP4IP<2:0>: ADC Pair 4 Conversion Done Interrupt Priority bits(4)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7
Unimplemented: Read as ‘0’
bit 6-4
ADCP3IP<2:0>: ADC Pair 3 Conversion Done Interrupt Priority bits(2,3)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3
Unimplemented: Read as ‘0’
bit 2-0
ADCP2IP<2:0>: ADC Pair 2 Conversion Done Interrupt Priority bits(1)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
Note 1: These bits are not implemented in dsPIC33FJ06GS101 devices.
2: These bits are not implemented in dsPIC33FJ06GS102 devices.
3: These bits are not implemented in dsPIC33FJ06GS202 devices.
4: These bits are implemented in dsPIC33FJ16GS504 devices only.
DS70318D-page 130
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-34:
IPC29: INTERRUPT PRIORITY CONTROL REGISTER 29
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
R/W-1
R/W-0
R/W-0
ADCP6IP<2:0>(1)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-3
Unimplemented: Read as ‘0’
bit 2-0
ADCP6IP<2:0>: ADC Pair 6 Conversion Done Interrupt 1 Priority bits(1)
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
x = Bit is unknown
Note 1: These bits are not implemented in dsPIC33FJ06GS202 devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 131
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 7-35:
INTTREG: INTERRUPT CONTROL AND STATUS REGISTER
U-0
U-0
U-0
U-0
—
—
—
—
R-0
R-0
R-0
R-0
ILR<3:0>
bit 15
bit 8
U-0
R-0
R-0
—
R-0
R-0
R-0
R-0
R-0
VECNUM<6:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-12
Unimplemented: Read as ‘0’
bit 11-8
ILR<3:0>: New CPU Interrupt Priority Level bits
1111 = CPU Interrupt Priority Level is 15
•
•
•
0001 = CPU Interrupt Priority Level is 1
0000 = CPU Interrupt Priority Level is 0
bit 7
Unimplemented: Read as ‘0’
bit 6-0
VECNUM<6:0>: Vector Number of Pending Interrupt bits
0111111 = Interrupt vector pending is number 135
•
•
•
0000001 = Interrupt vector pending is number 9
0000000 = Interrupt vector pending is number 8
DS70318D-page 132
Preliminary
x = Bit is unknown
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
7.4
7.4.3
Interrupt Setup Procedures
7.4.1
INITIALIZATION
Complete the following steps to configure an interrupt
source at initialization:
1.
2.
Set the NSTDIS bit (INTCON1<15>) if nested
interrupts are not desired.
Select the user-assigned priority level for the
interrupt source by writing the control bits in the
appropriate IPCx register. The priority level will
depend on the specific application and type of
interrupt source. If multiple priority levels are not
desired, the IPCx register control bits for all
enabled interrupt sources can be programmed
to the same non-zero value.
Note:
3.
4.
At a device Reset, the IPCx registers are
initialized such that all user interrupt
sources are assigned to priority level 4.
Clear the interrupt flag status bit associated with
the peripheral in the associated IFSx register.
Enable the interrupt source by setting the
interrupt enable control bit associated with the
source in the appropriate IECx register.
7.4.2
TRAP SERVICE ROUTINE
A Trap Service Routine (TSR) is coded like an ISR,
except that the appropriate trap status flag in the
INTCON1 register must be cleared to avoid re-entry
into the TSR.
7.4.4
INTERRUPT DISABLE
The following steps outline the procedure to disable all
user interrupts:
1.
Push the current SR value onto the software
stack using the PUSH instruction.
Force the CPU to priority level 7 by inclusive
ORing the value EOh with SRL.
2.
To enable user interrupts, the POP instruction can be
used to restore the previous SR value.
Note:
Only user interrupts with a priority level of
7 or lower can be disabled. Trap sources
(level 8-level 15) cannot be disabled.
The DISI instruction provides a convenient way to
disable interrupts of priority levels 1-6 for a fixed period
of time. Level 7 interrupt sources are not disabled by
the DISI instruction.
INTERRUPT SERVICE ROUTINE
The method used to declare an ISR and initialize
IVT with the correct vector address depends on
programming language (C or assembler) and
language development toolsuite used to develop
application.
the
the
the
the
In general, the user application must clear the interrupt
flag in the appropriate IFSx register for the source of
interrupt that the ISR handles. Otherwise, program will
re-enter the ISR immediately after exiting the routine. If
the ISR is coded in assembly language, it must be
terminated using a RETFIE instruction to unstack the
saved PC value, SRL value and old CPU priority level.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 133
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 134
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
8.0
• An on-chip Phase-Locked Loop (PLL) to scale the
internal operating frequency to the required
system clock frequency
• An internal FRC oscillator that can also be used
with the PLL, thereby allowing full-speed operation
without any external clock generation hardware
• Clock switching between various clock sources
• Programmable clock postscaler for system power
savings
• A Fail-Safe Clock Monitor (FSCM) that detects
clock failure and takes fail-safe measures
• A Clock Control register (OSCCON)
• Nonvolatile Configuration bits for main oscillator
selection.
• Auxiliary PLL for ADC and PWM
OSCILLATOR
CONFIGURATION
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a comprehensive reference source. To complement
the information in this data sheet, refer to
the “dsPIC33F Family Reference Manual”,
Section 42. “Oscillator (Part IV)”
(DS70307), which is available from the
Microchip web site (www.microchip.com).
Note:
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 oscillator system provides:
• External and internal oscillator options as clock
sources
FIGURE 8-1:
A simplified diagram of the oscillator system is shown
in Figure 8-1.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 OSCILLATOR SYSTEM
DIAGRAM
DOZE<2:0>
R
POSCCLK
(2)
XT, HS, EC
S3
PLL(1)
S1
OSC2
S2
XTPLL, HSPLL,
ECPLL, FRCPLL
S1/S3
FVCO(1)
FCY
DOZE
OSC1
Primary Oscillator
POSCMD<1:0>
FP
FRC
Oscillator
FRCDIV
÷ 2
FRCCLK
FRCDIVN
FOSC
S7
FRCDIV<2:0>
TUN<5:0>
FRCDIV16
÷ 16
S6
FRC
S0
LPRC
LPRC
Oscillator
S5
Reference Clock Generation
POSCCLK
÷ N
FOSC
Clock Fail
REFCLKO
RPx
ROSEL
S7
Clock Switch
Reset
NOSC<2:0> FNOSC<2:0>
WDT, PWRT,
FSCM
RODIV<3:0>
Auxiliary Clock Generation
POSCCLK
FRCCLK
ASRCSEL
Note
FVCO(1)
APLL
x16
FRCSEL
ACLK
ENAPLL
SELACLK
APSTSCLR<2:0>
1:
See Section 8.1.3 “PLL Configuration” and Section 8.2 “Auxiliary Clock Generation” for FVCO values.
2:
If the Oscillator is used with XT or HS modes, an external parallel resistor with the value of 1 MΩ must be connected.
© 2009 Microchip Technology Inc.
To PWM/ADC
÷ N
Preliminary
DS70318D-page 135
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
8.1
CPU Clocking System
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices provide six system clock options:
•
•
•
•
•
•
Fast RC (FRC) Oscillator
FRC Oscillator with PLL
Primary (XT, HS or EC) Oscillator
Primary Oscillator with PLL
Low-Power RC (LPRC) Oscillator
FRC Oscillator with Postscaler
8.1.1
The FRC frequency depends on the FRC accuracy
(see Table 24-20) and the value of the FRC Oscillator
Tuning register (see Register 8-4).
8.1.2
SYSTEM CLOCK SOURCES
The Fast RC (FRC) internal oscillator runs at a nominal
frequency of 7.37 MHz. User software can tune the
FRC frequency. User software can optionally specify a
factor (ranging from 1:2 to 1:256) by which the FRC
clock frequency is divided. This factor is selected using
the FRCDIV<2:0> (CLKDIV<10:8>) bits.
The primary oscillator can use one of the following as
its clock source:
SYSTEM CLOCK SELECTION
The oscillator source used at a device Power-on Reset
event is selected using Configuration bit settings. The
oscillator Configuration bit settings are located in the
Configuration registers in the program memory. (Refer
to Section 21.1 “Configuration Bits” for further
details.) The Initial Oscillator Selection Configuration
bits, FNOSC<2:0> (FOSCSEL<2:0>), and the Primary
Oscillator
Mode
Select
Configuration
bits,
POSCMD<1:0> (FOSC<1:0>), select the oscillator
source that is used at a Power-on Reset. The FRC
primary oscillator is the default (unprogrammed)
selection.
The Configuration bits allow users to choose among
12 different clock modes, shown in Table 8-1.
• XT (Crystal): Crystals and ceramic resonators in
the range of 3 MHz to 10 MHz. The crystal is
connected to the OSC1 and OSC2 pins.
• HS (High-Speed Crystal): Crystals in the range of
10 MHz to 40 MHz. The crystal is connected to
the OSC1 and OSC2 pins.
• EC (External Clock): The external clock signal is
directly applied to the OSC1 pin.
The LPRC internal oscIllator runs at a nominal
frequency of 32.768 kHz. It is also used as a reference
clock by the Watchdog Timer (WDT) and Fail-Safe
Clock Monitor (FSCM).
The clock signals generated by the FRC and primary
oscillators can be optionally applied to an on-chip
Phase-Locked Loop (PLL) to provide a wide range of
TABLE 8-1:
output frequencies for device operation. PLL
configuration is described in Section 8.1.3 “PLL Configuration”.
The output of the oscillator (or the output of the PLL if
a PLL mode has been selected), FOSC, is divided by 2
to generate the device instruction clock (FCY) and the
peripheral clock time base (FP). FCY defines the
operating speed of the device and speeds up to 40
MHz are supported by the dsPIC33FJ06GS101/X02
and dsPIC33FJ16GSX02/X04 architecture.
Instruction execution speed or device operating
frequency, FCY, is given by Equation 8-1.
EQUATION 8-1:
DEVICE OPERATING
FREQUENCY
FCY = FOSC/2
CONFIGURATION BIT VALUES FOR CLOCK SELECTION
Oscillator Mode
Oscillator Source POSCMD<1:0>
FNOSC<2:0>
Note
Fast RC Oscillator with Divide-by-N (FRCDIVN)
Internal
xx
111
1, 2
Fast RC Oscillator with Divide-by-16 (FRCDIV16)
Internal
xx
110
1
Low-Power RC Oscillator (LPRC)
Internal
xx
101
1
Reserved
xx
100
—
Primary Oscillator (HS) with PLL (HSPLL)
Primary
10
011
—
Primary Oscillator (XT) with PLL (XTPLL)
Primary
01
011
—
Reserved
Primary Oscillator (EC) with PLL (ECPLL)
Primary
00
011
1
Primary Oscillator (HS)
Primary
10
010
—
Primary Oscillator (XT)
Primary
01
010
—
Primary Oscillator (EC)
Primary
00
010
1
Fast RC Oscillator with PLL (FRCPLL)
Internal
xx
001
1
Fast RC Oscillator (FRC)
Internal
xx
000
1
Note 1:
2:
OSC2 pin function is determined by the OSCIOFNC Configuration bit.
This is the default oscillator mode for an unprogrammed (erased) device.
DS70318D-page 136
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
8.1.3
PLL CONFIGURATION
The primary oscillator and internal FRC oscillator can
optionally use an on-chip PLL to obtain higher speeds
of operation. The PLL provides significant flexibility in
selecting the device operating speed. A block diagram
of the PLL is shown in Figure 8-2.
The output of the primary oscillator or FRC, denoted as
‘FIN’, is divided down by a prescale factor (N1) of 2, 3,
... or 33 before being provided to the PLL’s Voltage
Controlled Oscillator (VCO). The input to the VCO must
be selected in the range of 0.8 MHz to 8 MHz. The
prescale factor ‘N1’ is selected using the
PLLPRE<4:0> bits (CLKDIV<4:0>).
The PLL Feedback Divisor, selected using the
PLLDIV<8:0> bits (PLLFBD<8:0>), provides a factor, ‘M’,
by which the input to the VCO is multiplied. This factor
must be selected such that the resulting VCO output
frequency is in the range of 100 MHz to 200 MHz.
The VCO output is further divided by a postscale factor,
‘N2’. This factor is selected using the PLLPOST<1:0>
bits (CLKDIV<7:6>). ‘N2’ can be either 2, 4, or 8, and
must be selected such that the PLL output frequency
(FOSC) is in the range of 12.5 MHz to 80 MHz, which
generates device operating speeds of 6.25-40 MIPS.
FIGURE 8-2:
For a primary oscillator or FRC oscillator, output ‘FIN’,
the PLL output ‘FOSC’ is given by Equation 8-2.
EQUATION 8-2:
FOSC CALCULATION
FOSC = FIN *
M
( N1*N2
)
For example, suppose a 10 MHz crystal is being used
with the selected oscillator mode of XT with PLL (see
Equation 8-3).
• If PLLPRE<4:0> = 0, then N1 = 2. This yields a
VCO input of 10/2 = 5 MHz, which is within the
acceptable range of 0.8-8 MHz.
• If PLLDIV<8:0> = 0x1E, then M = 32. This yields a
VCO output of 5 x 32 = 160 MHz, which is within
the 100-200 MHz ranged needed.
• If PLLPOST<1:0> = 0, then N2 = 2. This provides
a Fosc of 160/2 = 80 MHz. The resultant device
operating speed is 80/2 = 40 MIPS.
EQUATION 8-3:
FCY =
FOSC
2
=
XT WITH PLL MODE
EXAMPLE
1
2
* 32
( 10000000
) = 40 MIPS
2*2
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 PLL BLOCK DIAGRAM
FVCO
100-200 MHz
Here(1)
0.8-8.0 MHz
Here(1)
Source (Crystal, External
Clock or Internal RC)
PLLPRE
X
VCO
PLLPOST
PLLDIV
N1
Divide by
2-33
M
Divide by
2-513
12.5-80 MHz
Here(1)
FOSC
N2
Divide by
2, 4, 8
Note 1: This frequency range must be satisfied at all times.
8.2
Auxiliary Clock Generation
Note:
The auxiliary clock generation is used for a peripherals
that need to operate at a frequency unrelated to the
system clock such as a PWM or ADC.
Note:
To achieve 1.04 ns PWM resolution, the
auxiliary clock must be set up for 120 MHz.
The primary oscillator and internal FRC oscillator
sources can be used with an auxiliary PLL to obtain the
auxiliary clock. The auxiliary PLL has a fixed 16x
multiplication factor.
© 2009 Microchip Technology Inc.
8.3
If the primary PLL is used as a source for
the auxiliary clock, then the primary PLL
should be configured up to a maximum
operation of 30 MIPS or less.
Reference Clock Generation
The reference clock output logic provides the user with
the ability to output a clock signal based on the system
clock or the crystal oscillator on a device pin. The user
application can specify a wide range of clock scaling
prior to outputting the reference clock.
Preliminary
DS70318D-page 137
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
OSCCON: OSCILLATOR CONTROL REGISTER(1)
REGISTER 8-1:
U-0
R-0
—
R-0
R-0
COSC<2:0>
U-0
R/W-y
R/W-y
R/W-y
NOSC<2:0>(2)
—
bit 15
bit 8
R/W-0
R/W-0
R-0
U-0
R/C-0
U-0
U-0
R/W-0
CLKLOCK
IOLOCK
LOCK
—
CF
—
—
OSWEN
bit 7
bit 0
Legend:
y = Value set from Configuration bits on POR
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
Unimplemented: Read as ‘0’
bit 14-12
COSC<2:0>: Current Oscillator Selection bits (read-only)
000 = Fast RC oscillator (FRC)
001 = Fast RC oscillator (FRC) with PLL
010 = Primary oscillator (XT, HS, EC)
011 = Primary oscillator (XT, HS, EC) with PLL
100 = Reserved
101 = Low-Power RC oscillator (LPRC)
110 = Fast RC oscillator (FRC) with divide-by-16
111 = Fast RC oscillator (FRC) with divide-by-n
bit 11
Unimplemented: Read as ‘0’
bit 10-8
NOSC<2:0>: New Oscillator Selection bits(2)
000 = Fast RC oscillator (FRC)
001 = Fast RC oscillator (FRC) with PLL
010 = Primary oscillator (XT, HS, EC)
011 = Primary oscillator (XT, HS, EC) with PLL
100 = Reserved
101 = Low-Power RC oscillator (LPRC)
110 = Fast RC oscillator (FRC) with divide-by-16
111 = Fast RC oscillator (FRC) with divide-by-n
bit 7
CLKLOCK: Clock Lock Enable bit
If clock switching is enabled and FSCM is disabled, (FOSC<FCKSM> = 0b01):
1 = Clock switching is disabled, system clock source is locked
0 = Clock switching is enabled, system clock source can be modified by clock switching
bit 6
IOLOCK: Peripheral Pin Select Lock bit
1 = Peripherial pin select is locked, write to Peripheral Pin Select registers not allowed
0 = Peripherial pin select is not locked, write to Peripheral Pin Select registers allowed
bit 5
LOCK: PLL Lock Status bit (read-only)
1 = Indicates that PLL is in lock, or PLL start-up timer is satisfied
0 = Indicates that PLL is out of lock, start-up timer is in progress or PLL is disabled
bit 4
Unimplemented: Read as ‘0’
Note 1: Writes to this register require an unlock sequence. Refer to Section 42. “Oscillator (Part IV)” (DS70307)
in the “dsPIC33F Family Reference Manual” (available from the Microchip website) for details.
2: Direct clock switches between any primary oscillator mode with PLL and FRCPLL mode are not permitted.
This applies to clock switches in either direction. In these instances, the application must switch to FRC mode
as a transition clock source between the two PLL modes.
DS70318D-page 138
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 8-1:
OSCCON: OSCILLATOR CONTROL REGISTER(1) (CONTINUED)
bit 3
CF: Clock Fail Detect bit (read/clear by application)
1 = FSCM has detected clock failure
0 = FSCM has not detected clock failure
bit 2-1
Unimplemented: Read as ‘0’
bit 0
OSWEN: Oscillator Switch Enable bit
1 = Request oscillator switch to selection specified by NOSC<2:0> bits
0 = Oscillator switch is complete
Note 1: Writes to this register require an unlock sequence. Refer to Section 42. “Oscillator (Part IV)” (DS70307)
in the “dsPIC33F Family Reference Manual” (available from the Microchip website) for details.
2: Direct clock switches between any primary oscillator mode with PLL and FRCPLL mode are not permitted.
This applies to clock switches in either direction. In these instances, the application must switch to FRC mode
as a transition clock source between the two PLL modes.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 139
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 8-2:
R/W-0
CLKDIV: CLOCK DIVISOR REGISTER
R/W-0
ROI
R/W-1
R/W-1
R/W-0
R/W-0
(1)
DOZE<2:0>
DOZEN
R/W-0
R/W-0
FRCDIV<2:0>
bit 15
bit 8
R/W-0
R/W-1
PLLPOST<1:0>
U-0
R/W-0
R/W-0
—
R/W-0
R/W-0
R/W-0
PLLPRE<4:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
ROI: Recover on Interrupt bit
1 = Interrupts will clear the DOZEN bit and the processor clock/peripheral clock ratio is set to 1:1
0 = Interrupts have no effect on the DOZEN bit
bit 14-12
DOZE<2:0>: Processor Clock Reduction Select bits
000 = FCY/1
001 = FCY/2
010 = FCY/4
011 = FCY/8 (default)
100 = FCY/16
101 = FCY/32
110 = FCY/64
111 = FCY/128
bit 11
DOZEN: Doze Mode Enable bit(1)
1 = DOZE<2:0> field specifies the ratio between the peripheral clocks and the processor clocks
0 = Processor clock/peripheral clock ratio forced to 1:1
bit 10-8
FRCDIV<2:0>: Internal Fast RC Oscillator Postscaler bits
000 = FRC divide by 1 (default)
001 = FRC divide by 2
010 = FRC divide by 4
011 = FRC divide by 8
100 = FRC divide by 16
101 = FRC divide by 32
110 = FRC divide by 64
111 = FRC divide by 256
bit 7-6
PLLPOST<1:0>: PLL VCO Output Divider Select bits (also denoted as ‘N2’, PLL postscaler)
00 = Output/2
01 = Output/4 (default)
10 = Reserved
11 = Output/8
bit 5
Unimplemented: Read as ‘0’
bit 4-0
PLLPRE<4:0>: PLL Phase Detector Input Divider bits (also denoted as ‘N1’, PLL prescaler)
00000 = Input/2 (default)
00001 = Input/3
•
•
•
11111 = Input/33
Note 1: This bit is cleared when the ROI bit is set and an interrupt occurs.
DS70318D-page 140
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 8-3:
PLLFBD: PLL FEEDBACK DIVISOR REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
—
—
—
—
—
—
—
PLLDIV<8>
bit 15
bit 8
R/W-0
R/W-0
R/W-1
R/W-1
R/W-0
R/W-0
R/W-0
R/W-0
PLLDIV<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-9
Unimplemented: Read as ‘0’
bit 8-0
PLLDIV<8:0>: PLL Feedback Divisor bits (also denoted as ‘M’, PLL multiplier)
000000000 = 2
000000001 = 3
000000010 = 4
•
•
•
000110000 = 50 (default)
•
•
•
111111111 = 513
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 141
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 8-4:
OSCTUN: FRC OSCILLATOR TUNING REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
—
R/W-0
R/W-0
R/W-0
—
R/W-0
TUN<5:0>
R/W-0
R/W-0
(1)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-6
Unimplemented: Read as ‘0’
bit 5-0
TUN<5:0>: FRC Oscillator Tuning bits(1)
011111 = Center frequency + 11.625% (8.23 MHz)
011110 = Center frequency + 11.25% (8.20 MHz)
•
•
•
000001 = Center frequency + 0.375% (7.40 MHz)
000000 = Center frequency (7.37 MHz nominal)
111111 = Center frequency -0.375% (7.345 MHz)
•
•
•
100001 = Center frequency -11.625% (6.52 MHz)
100000 = Center frequency -12% (6.49 MHz)
x = Bit is unknown
Note 1: OSCTUN functionality has been provided to help customers compensate for temperature effects on the
FRC frequency over a wide range of temperatures. The tuning step size is an approximation and is neither
characterized nor tested
DS70318D-page 142
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 8-5:
ACLKCON: AUXILIARY CLOCK DIVISOR CONTROL REGISTER
R/W-0
R-0
R/W-0
U-0
U-0
ENAPLL
APLLCK
SELACLK
—
—
R/W-0
R/W-0
R/W-0
APSTSCLR<2:0>
bit 15
bit 0
R/W-0
R/W-0
U-0
U-0
U-0
U-0
U-0
U-0
ASRCSEL
FRCSEL
—
—
—
—
—
—
bit 7
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
ENAPLL: Auxiliary PLL Enable bit
1 = APLL is enabled
0 = APLL is disabled
bit 14
APLLCK: APLL Locked Status bit (read-only)
1 = Indicates that auxiliary PLL is in lock
0 = Indicates that auxiliary PLL is not in lock
bit 13
SELACLK: Select Auxiliary Clock Source for Auxiliary Clock Divider bit
1 = Auxiliary Oscillators provides the source clock for auxiliary clock divider
0 = Primary PLL (FVCO) provides the source clock for auxiliary clock divider
bit 12-11
Unimplemented: Read as ‘0’
bit 10-8
APSTSCLR<2:0>: Auxiliary Clock Output Divider bits
111 = Divided by 1
110 = Divided by 2
101 = Divided by 4
100 = Divided by 8
011 = Divided by 16
010 = Divided by 32
001 = Divided by 64
000 = Divided by 256
bit 7
ASRCSEL: Select Reference Clock Source for Auxiliary Clock bit
1 = Primary oscillator is the clock source
0 = No clock input is selected
bit 6
FRCSEL: Select Reference Clock Source for Auxiliary PLL bit
1 = Select FRC clock for auxiliary PLL
0 = Input clock source is determined by ASRCSEL bit setting
bit 5-0
Unimplemented: Read as ‘0’
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 143
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 8-6:
R/W-0
REFOCON: REFERENCE OSCILLATOR CONTROL REGISTER
U-0
ROON
—
R/W-0
ROSIDL
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
(1)
ROSEL
RODIV<3:0>
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
bit 7
U-0
—
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
ROON: Reference Oscillator Output Enable bit
1 = Reference oscillator output enabled on REFCLK0(2) pin
0 = Reference oscillator output disabled
bit 14
Unimplemented: Read as ‘0’
bit 13
ROSIDL: Reference Oscillator Run in Sleep bit
1 = Reference oscillator output continues to run in Sleep
0 = Reference oscillator output is disabled in Sleep
bit 12
ROSEL: Reference Oscillator Source Select bit
1 = Oscillator crystal used as the reference clock
0 = System clock used as the reference clock
bit 11-8
RODIV<3:0>: Reference Oscillator Divider bits(1)
1111 = Reference clock divided by 32,768
1110 = Reference clock divided by 16,384
1101 = Reference clock divided by 8,192
1100 = Reference clock divided by 4,096
1011 = Reference clock divided by 2,048
1010 = Reference clock divided by 1,024
1001 = Reference clock divided by 512
1000 = Reference clock divided by 256
0111 = Reference clock divided by 128
0110 = Reference clock divided by 64
0101 = Reference clock divided by 32
0100 = Reference clock divided by 16
0011 = Reference clock divided by 8
0010 = Reference clock divided by 4
0001 = Reference clock divided by 2
0000 = Reference clock
bit 7-0
Unimplemented: Read as ‘0’
x = Bit is unknown
Note 1: The reference oscillator output must be disabled (ROON = 0) before writing to these bits.
2: This pin is remappable. Refer to Section 10.4 “Peripheral Pin Select” for more information.
DS70318D-page 144
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
8.4
2.
Clock Switching Operation
Applications are free to switch among any of the four
clock sources (primary, LP, FRC and LPRC) under
software control at any time. To limit the possible side
effects of this flexibility, dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 devices have a safeguard
lock built into the switch process.
Note:
8.4.1
Primary oscillator mode has three different
submodes (XT, HS and EC), which are
determined by the POSCMD<1:0>
Configuration bits. While an application
can switch to and from primary oscillator
mode in software, it cannot switch among
the different primary submodes without
reprogramming the device.
If a valid clock switch has been initiated, the
LOCK
(OSCCON<5>)
and
the
CF
(OSCCON<3>) status bits are cleared.
The new oscillator is turned on by the hardware
if it is not currently running. If a crystal oscillator
must be turned on, the hardware waits until the
Oscillator Start-up Timer (OST) expires. If the
new source is using the PLL, the hardware waits
until a PLL lock is detected (LOCK = 1).
The hardware waits for 10 clock cycles from the
new clock source and then performs the clock
switch.
The hardware clears the OSWEN bit to indicate a
successful clock transition. In addition, the NOSC
bit values are transferred to the COSC status bits.
The old clock source is turned off at this time,
with the exception of LPRC (if WDT or FSCM
are enabled).
3.
4.
5.
6.
ENABLING CLOCK SWITCHING
To enable clock switching, the FCKSM1 Configuration
bit in the Configuration register must be programmed to
‘0’. (Refer to Section 21.1 “Configuration Bits” for
further details.) If the FCKSM1 Configuration bit is
unprogrammed (‘1’), the clock switching function and
Fail-Safe Clock Monitor function are disabled. This is
the default setting.
Note 1: The processor continues to execute code
throughout the clock switching sequence.
Timing-sensitive code should not be
executed during this time.
2: Direct clock switches between any primary
oscillator mode with PLL and FRCPLL
mode are not permitted. This applies to
clock switches in either direction. In these
instances, the application must switch to
FRC mode as a transition clock source
between the two PLL modes.
3: Refer to Section 42. “Oscillator (Part
IV)” (DS70307) in the “dsPIC33F Family
Reference Manual” for details.
The NOSC control bits (OSCCON<10:8>) do not
control the clock selection when clock switching is
disabled. However, the COSC bits (OSCCON<14:12>)
reflect the clock source selected by the FNOSC
Configuration bits.
The OSWEN control bit (OSCCON<0>) has no effect
when clock switching is disabled. It is held at ‘0’ at all
times.
8.4.2
OSCILLATOR SWITCHING SEQUENCE
To perform a clock switch, the following basic sequence
is required:
1.
2.
3.
4.
5.
If
desired,
read
the
COSC
bits
(OSCCON<14:12>) to determine the current
oscillator source.
Perform the unlock sequence to allow a write to
the OSCCON register high byte.
Write the appropriate value to the NOSC control
bits (OSCCON<10:8>) for the new oscillator
source.
Perform the unlock sequence to allow a write to
the OSCCON register low byte.
Set the OSWEN bit (OSCCON<0>) to initiate the
oscillator switch.
Once the basic sequence is completed, the system
clock hardware responds automatically as follows:
1.
8.5
Fail-Safe Clock Monitor (FSCM)
The Fail-Safe Clock Monitor (FSCM) allows the device
to continue to operate even in the event of an oscillator
failure. The FSCM function is enabled by programming.
If the FSCM function is enabled, the LPRC internal
oscillator runs at all times (except during Sleep mode)
and is not subject to control by the Watchdog Timer.
In the event of an oscillator failure, the FSCM
generates a clock failure trap event and switches the
system clock over to the FRC oscillator. Then, the
application program can either attempt to restart the
oscillator or execute a controlled shutdown. The trap
can be treated as a warm Reset by simply loading the
Reset address into the oscillator fail trap vector.
If the PLL multiplier is used to scale the system clock,
the internal FRC is also multiplied by the same factor
on clock failure. Essentially, the device switches to
FRC with PLL on a clock failure.
The clock switching hardware compares the
COSC status bits with the new value of the
NOSC control bits. If they are the same, the
clock switch is a redundant operation. In this
case, the OSWEN bit is cleared automatically
and the clock switch is aborted.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 145
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 146
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
9.0
Note:
POWER-SAVING FEATURES
9.2
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference
Manual”,
Section
9.
“Watchdog Timer and Power-Saving
Modes” (DS70196), which is available
from the Microchip web site (www.microchip.com).
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices provide the ability to manage power
consumption by selectively managing clocking to the
CPU and the peripherals. In general, a lower clock
frequency and a reduction in the number of circuits being
clocked
constitutes
lower
consumed
power.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
devices can manage power consumption in four different
ways:
•
•
•
•
Clock Frequency
Instruction-Based Sleep and Idle modes
Software-Controlled Doze mode
Selective Peripheral Control in Software
Combinations of these methods can be used to
selectively tailor an application’s power consumption
while still maintaining critical application features, such
as timing-sensitive communications.
9.1
Clock Frequency and Clock
Switching
The
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices allow a wide range
of clock frequencies to be selected under application
control. If the system clock configuration is not locked,
users can choose low-power or high-precision
oscillators by simply changing the NOSC bits
(OSCCON<10:8>). The process of changing a system
clock during operation, as well as limitations to the
process, are discussed in more detail in Section 8.0
“Oscillator Configuration”.
EXAMPLE 9-1:
Instruction-Based Power-Saving
Modes
The dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices have two special power-saving modes that
are entered through the execution of a special PWRSAV
instruction. Sleep mode stops clock operation and halts all
code execution. Idle mode halts the CPU and code
execution, but allows peripheral modules to continue
operation. The assembler syntax of the PWRSAV
instruction is shown in Example 9-1.
Note:
SLEEP_MODE and IDLE_MODE are
constants defined in the assembler
include file for the selected device.
Sleep and Idle modes can be exited as a result of an
enabled interrupt, WDT time-out or a device Reset. When
the device exits these modes, it is said to wake-up.
9.2.1
SLEEP MODE
The following occur in Sleep mode:
• The system clock source is shut down. If an
on-chip oscillator is used, it is turned off.
• The device current consumption is reduced to a
minimum, provided that no I/O pin is sourcing
current.
• The Fail-Safe Clock Monitor does not operate,
since the system clock source is disabled.
• The LPRC clock continues to run in Sleep mode if
the WDT is enabled.
• The WDT, if enabled, is automatically cleared
prior to entering Sleep mode.
• Some device features or peripherals may continue
to operate. This includes the items such as the
input change notification on the I/O ports or
peripherals that use an external clock input.
• Any peripheral that requires the system clock
source for its operation is disabled.
The device will wake-up from Sleep mode on any of
these events:
• Any interrupt source that is individually enabled
• Any form of device Reset
• A WDT time-out
On wake-up from Sleep mode, the processor restarts
with the same clock source that was active when Sleep
mode was entered.
PWRSAV INSTRUCTION SYNTAX
PWRSAV #SLEEP_MODE
PWRSAV #IDLE_MODE
; Put the device into SLEEP mode
; Put the device into IDLE mode
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 147
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
9.2.2
IDLE MODE
The following occur in Idle mode:
• The CPU stops executing instructions.
• The WDT is automatically cleared.
• The system clock source remains active. By
default, all peripheral modules continue to operate
normally from the system clock source, but can
also be selectively disabled (see Section 9.4
“Peripheral Module Disable”).
• If the WDT or FSCM is enabled, the LPRC also
remains active.
The device will wake-up from Idle mode on any of these
events:
• Any interrupt that is individually enabled
• Any device Reset
• A WDT time-out
On wake-up from Idle mode, the clock is reapplied to
the CPU and instruction execution begins immediately,
starting with the instruction following the PWRSAV
instruction, or the first instruction in the ISR.
9.2.3
INTERRUPTS COINCIDENT WITH
POWER SAVE INSTRUCTIONS
Any interrupt that coincides with the execution of a
PWRSAV instruction is held off until entry into Sleep or
Idle mode has completed. The device then wakes up
from Sleep or Idle mode.
9.3
Doze Mode
The preferred strategies for reducing power
consumption are changing clock speed and invoking
one of the power-saving modes. In some
circumstances, this may not be practical. For example,
it may be necessary for an application to maintain
uninterrupted synchronous communication, even while
it is doing nothing else. Reducing system clock speed
can introduce communication errors, while using a
power-saving mode can stop communications
completely.
Doze mode is enabled by setting the DOZEN bit
(CLKDIV<11>). The ratio between peripheral and core
clock speed is determined by the DOZE<2:0> bits
(CLKDIV<14:12>). There are eight possible
configurations, from 1:1 to 1:128, with 1:1 being the
default setting.
Programs can use Doze mode to selectively reduce
power consumption in event-driven applications. This
allows clock-sensitive functions, such as synchronous
communications, to continue without interruption while
the CPU idles, waiting for something to invoke an
interrupt routine. An automatic return to full-speed CPU
operation on interrupts can be enabled by setting the
ROI bit (CLKDIV<15>). By default, interrupt events
have no effect on Doze mode operation.
For example, suppose the device is operating at
20 MIPS and the CAN module has been configured for
500 kbps based on this device operating speed. If the
device is placed in Doze mode with a clock frequency
ratio of 1:4, the CAN module continues to communicate
at the required bit rate of 500 kbps, but the CPU now
starts executing instructions at a frequency of 5 MIPS.
9.4
The Peripheral Module Disable (PMD) registers
provide a method to disable a peripheral module by
stopping all clock sources supplied to that module.
When a peripheral is disabled using the appropriate
PMD control bit, the peripheral is in a minimum power
consumption state. The control and status registers
associated with the peripheral are also disabled, so
writes to those registers will have no effect and read
values will be invalid.
A peripheral module is enabled only if both the
associated bit in the PMD register is cleared and the
peripheral is supported by the specific dsPIC® DSC
variant. If the peripheral is present in the device, it is
enabled in the PMD register by default.
Note:
Doze mode is a simple and effective alternative method
to reduce power consumption while the device is still
executing code. In this mode, the system clock
continues to operate from the same source and at the
same speed. Peripheral modules continue to be
clocked at the same speed, while the CPU clock speed
is reduced. Synchronization between the two clock
domains is maintained, allowing the peripherals to
access the SFRs while the CPU executes code at a
slower rate.
DS70318D-page 148
Peripheral Module Disable
Preliminary
If a PMD bit is set, the corresponding
module is disabled after a delay of one
instruction cycle. Similarly, if a PMD bit is
cleared, the corresponding module is
enabled after a delay of one instruction
cycle (assuming the module control registers are already configured to enable
module operation).
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 9-1:
PMD1: PERIPHERAL MODULE DISABLE CONTROL REGISTER 1
U-0
U-0
R/W-0
R/W-0
R/W-0
U-0
R/W-0
U-0
—
—
T3MD
T2MD
T1MD
—
PWMMD
—
bit 15
bit 8
R/W-0
U-0
R/W-0
U-0
R/W-0
U-0
U-0
R/W-0
I2C1MD
—
U1MD
—
SPI1MD
—
—
ADCMD
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-14
Unimplemented: Read as ‘0’
bit 13
T3MD: Timer3 Module Disable bit
1 = Timer3 module is disabled
0 = Timer3 module is enabled
bit 12
T2MD: Timer2 Module Disable bit
1 = Timer2 module is disabled
0 = Timer2 module is enabled
bit 11
T1MD: Timer1 Module Disable bit
1 = Timer1 module is disabled
0 = Timer1 module is enabled
bit 10
Unimplemented: Read as ‘0’
bit 9
PWMMD: PWM Module Disable bit
1 = PWM module is disabled
0 = PWM module is enabled
bit 8
Unimplemented: Read as ‘0’
bit 7
I2C1MD: I2C1 Module Disable bit
1 = I2C1 module is disabled
0 = I2C1 module is enabled
bit 6
Unimplemented: Read as ‘0’
bit 5
U1MD: UART1 Module Disable bit
1 = UART1 module is disabled
0 = UART1 module is enabled
bit 4
Unimplemented: Read as ‘0’
bit 3
SPI1MD: SPI1 Module Disable bit
1 = SPI1 module is disabled
0 = SPI1 module is enabled
bit 2-1
Unimplemented: Read as ‘0’
bit 0
ADCMD: ADC Module Disable bit
1 = ADC module is disabled
0 = ADC module is enabled
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 149
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 9-2:
PMD2: PERIPHERAL MODULE DISABLE CONTROL REGISTER 2
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
R/W-0
—
—
—
—
—
—
IC2MD
IC1MD
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
R/W-0
—
—
—
—
—
—
OC2MD
OC1MD
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-10
Unimplemented: Read as ‘0’
bit 9
IC2MD: Input Capture 2 Module Disable bit
1 = Input Capture 2 module is disabled
0 = Input Capture 2 module is enabled
bit 8
IC1MD: Input Capture 1 Module Disable bit
1 = Input Capture 1 module is disabled
0 = Input Capture 1 module is enabled
bit 7-2
Unimplemented: Read as ‘0’
bit 1
OC2MD: Output Compare 2 Module Disable bit
1 = Output Compare 2 module is disabled
0 = Output Compare 2 module is enabled
bit 0
OC1MD: Output Compare 1 Module Disable bit
1 = Output Compare 1 module is disabled
0 = Output Compare 1 module is enabled
DS70318D-page 150
Preliminary
x = Bit is unknown
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 9-3:
PMD3: PERIPHERAL MODULE DISABLE CONTROL REGISTER 3
U-0
U-0
U-0
U-0
U-0
R/W-0
U-0
U-0
—
—
—
—
—
CMPMD
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-11
Unimplemented: Read as ‘0’
bit 10
CMPMD: Analog Comparator Module Disable bit
1 = Analog comparator module is disabled
0 = Analog comparator module is enabled
bit 9-0
Unimplemented: Read as ‘0’
REGISTER 9-4:
x = Bit is unknown
PMD4: PERIPHERAL MODULE DISABLE CONTROL REGISTER 4
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
R/W-0
U-0
U-0
U-0
—
—
—
—
REFOMD
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-4
Unimplemented: Read as ‘0’
bit 3
REFOMD: Reference Clock Generator Module Disable bit
1 = Reference clock generator module is disabled
0 = Reference clock generator module is enabled
bit 2-0
Unimplemented: Read as ‘0’
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 151
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 9-5:
PMD6: PERIPHERAL MODULE DISABLE CONTROL REGISTER 6
U-0
U-0
U-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
—
—
—
—
PWM4MD
PWM3MD
PWM2MD
PWM1MD
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-12
Unimplemented: Read as ‘0’
bit 11
PWM4MD: PWM Generator 4 Module Disable bit
1 = PWM Generator 4 module is disabled
0 = PWM Generator 4 module is enabled
bit 10
PWM3MD: PWM Generator 3 Module Disable bit
1 = PWM Generator 3 module is disabled
0 = PWM Generator 3 module is enabled
bit 9
PWM2MD: PWM Generator 2 Module Disable bit
1 = PWM Generator 2 module is disabled
0 = PWM Generator 2 module is enabled
bit 8
PWM1MD: PWM Generator 1 Module Disable bit
1 = PWM Generator 1 module is disabled
0 = PWM Generator 1 module is enabled
bit 7-0
Unimplemented: Read as ‘0’
DS70318D-page 152
Preliminary
x = Bit is unknown
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 9-6:
PMD7: PERIPHERAL MODULE DISABLE CONTROL REGISTER 7
U-0
U-0
U-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
—
—
—
—
CMP4MD
CMP3MD
CMP2MD
CMP1MD
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-12
Unimplemented: Read as ‘0’
bit 11
CMP4MD: Analog Comparator 4 Module Disable bit
1 = Analog Comparator 4 module is disabled
0 = Analog Comparator 4 module is enabled
bit 10
CMP3MD: Analog Comparator 3 Module Disable bit
1 = Analog Comparator 3 module is disabled
0 = Analog Comparator 3 module is enabled
bit 9
CMP2MD: Analog Comparator 2 Module Disable bit
1 = Analog Comparator 2 module is disabled
0 = Analog Comparator 2 module is enabled
bit 8
CMP1MD: Analog Comparator 1 Module Disable bit
1 = Analog Comparator 1 module is disabled
0 = Analog Comparator 1 module is enabled
bit 7-0
Unimplemented: Read as ‘0’
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 153
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 154
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
10.0
Note:
I/O PORTS
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 10. “I/O
Ports” (DS70193), which is available on
Microchip web site (www.microchip.com).
All of the device pins (except VDD, VSS, MCLR and
OSC1/CLKI) are shared among the peripherals and the
parallel I/O ports. All I/O input ports feature Schmitt
Trigger inputs for improved noise immunity.
10.1
Parallel I/O (PIO) Ports
Generally a parallel I/O port that shares a pin with a
peripheral is subservient to the peripheral. The
peripheral’s output buffer data and control signals are
provided to a pair of multiplexers. The multiplexers
select whether the peripheral or the associated port
has ownership of the output data and control signals of
the I/O pin. The logic also prevents “loop through”, in
which a port’s digital output can drive the input of a
FIGURE 10-1:
peripheral that shares the same pin. Figure 10-1 shows
how ports are shared with other peripherals and the
associated I/O pin to which they are connected.
When a peripheral is enabled and the peripheral is
actively driving an associated pin, the use of the pin as
a general purpose output pin is disabled. The I/O pin
can be read, but the output driver for the parallel port bit
is disabled. If a peripheral is enabled, but the peripheral
is not actively driving a pin, that pin can be driven by a
port.
All port pins have three registers directly associated
with their operation as digital I/O. The data direction
register (TRISx) determines whether the pin is an input
or an output. If the data direction bit is ‘1’, then the pin
is an input. All port pins are defined as inputs after a
Reset. Reads from the latch (LATx) read the latch.
Writes to the latch write the latch. Reads from the port
(PORTx) read the port pins, while writes to the port pins
write the latch.
Any bit and its associated data and control registers
that are not valid for a particular device will be
disabled. That means the corresponding LATx and
TRISx registers and the port pin will read as zeros.
When a pin is shared with another peripheral or
function that is defined as an input only, it is
nevertheless regarded as a dedicated port because
there is no other competing source of outputs.
BLOCK DIAGRAM OF A TYPICAL SHARED PORT STRUCTURE
Peripheral Module
Output Multiplexers
Peripheral Input Data
Peripheral Module Enable
I/O
Peripheral Output Enable
1
Peripheral Output Data
0
PIO Module
WR TRIS
Output Data
0
Read TRIS
Data Bus
1
Output Enable
D
Q
I/O Pin
CK
TRIS Latch
D
WR LAT +
WR PORT
Q
CK
Data Latch
Read LAT
Input Data
Read PORT
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 155
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
10.1.1
OPEN-DRAIN CONFIGURATION
10.2.1
In addition to the PORT, LAT and TRIS registers for
data control, some digital-only port pins can also be
individually configured for either digital or open-drain
output. This is controlled by the Open-Drain Control
register, ODCx, associated with each port. Setting any
of the bits configures the corresponding pin to act as an
open-drain output.
The open-drain feature allows the generation of
outputs higher than VDD (for example, 5V) on any
desired digital only pins by using external pull-up
resistors. The maximum open-drain voltage allowed is
the same as the maximum VIH specification.
Refer to “Pin Diagrams” for the available pins and
their functionality.
10.2
Configuring Analog Port Pins
The ADPCFG and TRIS registers control the operation
of the Analog-to-Digital (A/D) port pins. The port pins
that are to function as analog inputs must have their
corresponding TRIS bit set (input). If the TRIS bit is
cleared (output), the digital output level (VOH or VOL)
will be converted.
The ADPCFG register has a default value of 0x0000;
therefore, all pins that share ANx functions are analog
(not digital) by default.
When the PORT register is read, all pins configured as
analog input channels will read as cleared (a low level).
Pins configured as digital inputs will not convert an
analog input. Analog levels on any pin defined as a
digital input (including the ANx pins) can cause the
input buffer to consume current that exceeds the
device specifications.
EQUATION 10-1:
MOV
MOV
NOP
BTSS
0xFF00, W0
W0, TRISBB
PORTB, #13
DS70318D-page 156
I/O PORT WRITE/READ TIMING
One instruction cycle is required between a port direction
change or port write operation and a read operation of
the same port. Typically, this instruction would be a NOP.
An example is shown in Example 10-1.
10.3
Input Change Notification
The input change notification function of the I/O
ports allows the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 devices to generate interrupt
requests to the processor in response to a
Change-Of-State (COS) on selected input pins. This
feature can detect input Change-Of-States even in
Sleep mode, when the clocks are disabled. Depending
on the device pin count, up to 30 external signals (CNx
pin) can be selected (enabled) for generating an
interrupt request on a Change-Of-State.
Four control registers are associated with the CN
module. The CNEN1 and CNEN2 registers contain the
interrupt enable control bits for each of the CN input
pins. Setting any of these bits enables a CN interrupt
for the corresponding pins.
Each CN pin also has a weak pull-up connected to it.
The pull-ups act as a current source connected to the
pin, and eliminate the need for external resistors when
the push button or keypad devices are connected. The
pull-ups are enabled separately using the CNPU1 and
CNPU2 registers, which contain the control bits for
each of the CN pins. Setting any of the control bits
enables the weak pull-ups for the corresponding pins.
Note:
Pull-ups on change notification pins
should always be disabled when the port
pin is configured as a digital output.
PORT WRITE/READ EXAMPLE
;
;
;
;
Configure PORTB<15:8> as inputs
and PORTB<7:0> as outputs
Delay 1 cycle
Next Instruction
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
10.4
10.4.2.1
Peripheral Pin Select
Peripheral pin select configuration enables peripheral
set selection and placement on a wide range of I/O
pins. By increasing the pinout options available on a
particular device, programmers can better tailor the
microcontroller to their entire application, rather than
trimming the application to fit the device.
The peripheral pin select configuration feature operates
over a fixed subset of digital I/O pins. Programmers can
independently map the input and/or output of most
digital peripherals to any one of these I/O pins.
Peripheral pin select is performed in software, and generally does not require the device to be reprogrammed.
Hardware safeguards are included that prevent accidental or spurious changes to the peripheral mapping, once
it has been established.
10.4.1
The peripheral pin select feature is used with a range
of up to 30 pins. The number of available pins depends
on the particular device and its pin count. Pins that
support the peripheral pin select feature include the
designation “RPn” in their full pin designation, where
“RP” designates a remappable peripheral and “n” is the
remappable pin number.
10.4.2
The inputs of the peripheral pin select options are
mapped on the basis of the peripheral. A control
register associated with a peripheral dictates the pin it
will be mapped to. The RPINRx registers are used to
configure peripheral input mapping (see Register 10-1
through Register 10-14). Each register contains sets of
6-bit fields, with each set associated with one of the
remappable peripherals. Programming a given
peripheral’s bit field with an appropriate 6-bit value
maps the RPn pin with that value to that peripheral. For
any given device, the valid range of values for any bit
field corresponds to the maximum number of peripheral
pin selections supported by the device.
Figure 10-2 Illustrates remappable pin selection for
U1RX input.
Note:
AVAILABLE PINS
Input Mapping
For input mapping only, the Peripheral Pin
Select (PPS) functionality does not have
priority over the TRISx settings. Therefore,
when configuring the RPx pin for input, the
corresponding bit in the TRISx register
must also be configured for input (i.e., set
to ‘1’).
FIGURE 10-2:
CONTROLLING PERIPHERAL PIN
SELECT
REMAPPABLE MUX
INPUT FOR U1RX
U1RXR<5:0>
Peripheral pin select features are controlled through
two sets of Special Function Registers: one to map
peripheral inputs and one to map outputs. Because
they are separately controlled, a particular peripheral’s
input and output (if the peripheral has both) can be
placed on any selectable function pin without
constraint.
0
RP0
1
RP1
2
U1RX Input
to Peripheral
RP2
The association of a peripheral to a peripheral selectable pin is handled in two different ways, depending on
whether an input or output is being mapped.
33
RP33
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 157
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 10-1:
SELECTABLE INPUT SOURCES (MAPS INPUT TO FUNCTION)
Function Name
Register
Configuration
Bits
INT1
RPINR0
INT1R<5:0>
External Interrupt 2
INT2
RPINR1
INT2R<5:0>
Timer1 External Clock
T1CK
RPINR2
T1CKR<5:0>
Timer2 External Clock
T2CK
RPINR3
T2CKR<5:0>
Timer3 External Clock
Input Name
External Interrupt 1
T3CK
RPINR3
T3CKR<5:0>
Input Capture 1
IC1
RPINR7
IC1R<5:0>
Input Capture 2
IC2
RPINR7
IC2R<5:0>
Output Compare Fault A
OCFA
RPINR11
OCFAR<5:0>
UART1 Receive
U1RX
RPINR18
U1RXR<5:0>
U1CTS
RPINR18
U1CTSR<5:0>
SPI Data Input 1
SDI1
RPINR20
SDI1R<5:0>
SPI Clock Input 1
UART1 Clear To Send
SCK1
RPINR20
SCK1R<5:0>
SPI Slave Select Input 1
SS1
RPINR21
SS1R<5:0>
PWM Fault Input PWM1
FLT1
RPINR29
FLT1R<5:0>
PWM Fault Input PWM2
FLT2
RPINR30
FLT2R<5:0>
PWM Fault Input PWM3
FLT3
RPINR30
FLT3R<5:0>
PWM Fault Input PWM4
FLT4
RPINR31
FLT4R<5:0>
PWM Fault Input PWM5
FLT5
RPINR31
FLT5R<5:0>
PWM Fault Input PWM6
FLT6
RPINR32
FLT6R<5:0>
PWM Fault Input PWM7
FLT7
RPINR32
FLT7R<5:0>
PWM Fault Input PWM8
FLT8
RPINR33
FLT8R<5:0>
External Synchronization signal to PWM Master Time Base
SYNCI1
RPINR33
SYNCI1R<5:0>
External Synchronization signal to PWM Master Time Base
SYNCI2
RPINR34
SYNCI2R<5:0>
DS70318D-page 158
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
10.4.2.2
Output Mapping
FIGURE 10-3:
In contrast to inputs, the outputs of the peripheral pin
select options are mapped on the basis of the pin. In
this case, a control register associated with a particular
pin dictates the peripheral output to be mapped. The
RPORx registers are used to control output mapping.
Like the RPINRx registers, each register contains sets
of 6-bit fields, with each set associated with one RPn
pin (see Register 10-15 through Register 10-31). The
value of the bit field corresponds to one of the
peripherals, and that peripheral’s output is mapped to
the pin (see Table 10-2 and Figure 10-3).
The list of peripherals for output mapping also includes
a null value of ‘00000’ because of the mapping
technique. This permits any given pin to remain
unconnected from the output of any of the pin
selectable peripherals.
MULTIPLEXING OF
REMAPPABLE OUTPUT
FOR RPn
RPORn<5:0>
Default
0
U1TX Output Enable
3
U1RTS Output Enable 4
Output Enable
OC2 Output Enable
PWM4L Output Enable
Default
U1TX Output
U1RTS Output
19
45
0
3
4
Output Data
OC2 Output
PWM4L Output
TABLE 10-2:
Function
RPn
19
45
OUTPUT SELECTION FOR REMAPPABLE PIN (RPn)
RPORn<5:0>
Output Name
NULL
000000
RPn tied to default port pin
U1TX
000011
RPn tied to UART1 transmit
U1RTS
000100
RPn tied to UART1 ready to send
SDO1
000111
RPn tied to SPI1 data output
SCK1
001000
RPn tied to SPI1 clock output
SS1
001001
RPn tied to SPI1 slave select output
OC1
010010
RPn tied to Output Compare 1
OC2
010011
RPn tied to Output Compare 2
SYNCO1
100101
RPn tied to external device synchronization signal via PWM master time base
REFCLKO
100110
REFCLK output signal
ACMP1
100111
RPn tied to Analog Comparator Output 1
ACMP2
101000
RPn tied to Analog Comparator Output 2
ACMP3
101001
RPn tied to Analog Comparator Output 3
ACMP4
101010
RPn tied to Analog Comparator Output 4
PWM4H
101100
RPn tied to PWM output pins associated with PWM Generator 4
PWM4L
101101
RPn tied to PWM output pins associated with PWM Generator 4
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 159
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
10.4.2.3
Virtual Pins
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices support four virtual
RPn pins (RP32, RP33, RP34 and RP35), which are
identical in functionality to all other RPn pins, with the
exception of pinouts. These four pins are internal to the
devices and are not connected to a physical device pin.
These pins provide a simple way for inter-peripheral
connection without utilizing a physical pin. For example,
the output of the analog comparator can be connected to
RP32 and the PWM Fault input can be configured for
RP32 as well. This configuration allows the analog
comparator to trigger PWM Faults without the use of an
actual physical pin on the device.
10.4.3
CONTROLLING CONFIGURATION
CHANGES
Because peripheral remapping can be changed during
run time, some restrictions on peripheral remapping
are needed to prevent accidental configuration
changes. dsPIC33F devices include three features to
prevent alterations to the peripheral map:
• Control register lock sequence
• Continuous state monitoring
• Configuration bit pin select lock
10.4.3.1
Control Register Lock
Under normal operation, writes to the RPINRx and
RPORx registers are not allowed. Attempted writes
appear to execute normally, but the contents of the
registers remain unchanged. To change these
registers, they must be unlocked in hardware. The
register lock is controlled by the IOLOCK bit
(OSCCON<6>). Setting IOLOCK prevents writes to the
control registers; clearing IOLOCK allows writes.
Unlike the similar sequence with the oscillator’s LOCK
bit, IOLOCK remains in one state until changed. This
allows all of the peripheral pin selects to be configured
with a single unlock sequence followed by an update to
all control registers, then locked with a second lock
sequence.
10.4.3.2
Continuous State Monitoring
In addition to being protected from direct writes, the
contents of the RPINRx and RPORx registers are
constantly monitored in hardware by shadow registers.
If an unexpected change in any of the registers occurs
(such as cell disturbances caused by ESD or other
external events), a Configuration Mismatch Reset will
be triggered.
10.4.3.3
Configuration Bit Pin Select Lock
As an additional level of safety, the device can be
configured to prevent more than one write session to
the RPINRx and RPORx registers. The IOL1WAY
(FOSC<5>) Configuration bit blocks the IOLOCK bit
from being cleared after it has been set once. If
IOLOCK remains set, the register unlock procedure will
not execute and the Peripheral Pin Select Control
registers cannot be written to. The only way to clear the
bit and re-enable peripheral remapping is to perform a
device Reset.
In the default (unprogrammed) state, IOL1WAY is set,
restricting users to one write session. Programming
IOL1WAY allows user applications unlimited access
(with the proper use of the unlock sequence) to the
Peripheral Pin Select registers.
To set or clear IOLOCK, a specific command sequence
must be executed:
1.
2.
3.
Write 0x46 to OSCCON<7:0>.
Write 0x57 to OSCCON<7:0>.
Clear (or set) IOLOCK as a single operation.
Note:
MPLAB® C30 provides built-in C language
functions for unlocking the OSCCON
register:
__builtin_write_OSCCONL(value)
__builtin_write_OSCCONH(value)
See MPLAB C30 Help files for more
information.
DS70318D-page 160
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
10.5
Peripheral Pin Select Registers
The
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 families of devices implement
34 registers for remappable peripheral configuration:
Not all output remappable peripheral registers are
implemented on all devices. See the register
description of the specific register for further details.
• 15 Input Remappable Peripheral Registers
• 19 Output Remappable Peripheral Registers
Note:
Input and output register values can only
be changed if OSCCON<IOLOCK> = 0.
See Section 10.4.3.1 “Control Register
Lock” for a specific command sequence.
REGISTER 10-1:
RPINR0: PERIPHERAL PIN SELECT INPUT REGISTER 0
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
INT1R<5:0>
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
INT1R<5:0>: Assign External Interrupt 1 (INTR1) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-0
Unimplemented: Read as ‘0’
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 161
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-2:
RPINR1: PERIPHERAL PIN SELECT INPUT REGISTER 1
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
INT2R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-6
Unimplemented: Read as ‘0’
bit 5-0
INT2R<5:0>: Assign External Interrupt 2 (INTR2) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
DS70318D-page 162
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-3:
RPINR3: PERIPHERAL PIN SELECT INPUT REGISTER 3
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
T3CKR<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
T2CKR<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
T3CKR<5:0>: Assign Timer3 External Clock (T3CK) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
T2CKR<5:0>: Assign Timer2 External Clock (T2CK) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 163
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-4:
RPINR7: PERIPHERAL PIN SELECT INPUT REGISTER 7
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
IC2R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
IC1R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
IC2R<5:0>: Assign Input Capture 2 (IC2) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
IC1R<5:0>: Assign Input Capture 1 (IC1) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
DS70318D-page 164
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-5:
RPINR11: PERIPHERAL PIN SELECT INPUT REGISTER 11
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
OCFAR<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-6
Unimplemented: Read as ‘0’
bit 5-0
OCFAR<5:0>: Assign Output Capture A (OCFA) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 165
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-6:
RPINR18: PERIPHERAL PIN SELECT INPUT REGISTER 18
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
U1CTSR<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
U1RXR<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
U1CTSR<5:0>: Assign UART1 Clear to Send (U1CTS) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
U1RXR<5:0>: Assign UART1 Receive (U1RX) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
DS70318D-page 166
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-7:
RPINR20: PERIPHERAL PIN SELECT INPUT REGISTER 20
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
SCK1R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
SDI1R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
SCK1R<5:0>: Assign SPI1 Clock Input (SCK1IN) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
SDI1R<5:0>: Assign SPI1 Data Input (SDI1) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 167
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-8:
RPINR21: PERIPHERAL PIN SELECT INPUT REGISTER 21
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
SS1R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-6
Unimplemented: Read as ‘0’
bit 5-0
SS1R<5:0>: Assign SPI1 Slave Select Input (SS1IN) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
DS70318D-page 168
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-9:
RPINR29: PERIPHERAL PIN SELECT INPUT REGISTER 29
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
FLT1R<5:0>
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
FLT1R<5:0>: Assign PWM Fault Input 1 (FLT1) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-0
Unimplemented: Read as ‘0’
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 169
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-10: RPINR30: PERIPHERAL PIN SELECT INPUT REGISTER 30
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
FLT3R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
FLT2R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
FLT3R<5:0>: Assign PWM Fault Input 3 (FLT3) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
FLT2R<5:0>: Assign PWM Fault Input 2 (FLT2) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
DS70318D-page 170
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-11: RPINR31: PERIPHERAL PIN SELECT INPUT REGISTER 31
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
FLT5R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
FLT4R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
FLT5R<5:0>: Assign PWM Fault Input 5 (FLT5) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
FLT4R<5:0>: Assign PWM Fault Input 4 (FLT4) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 171
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-12: RPINR32: PERIPHERAL PIN SELECT INPUT REGISTER 32
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
FLT7R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
FLT6R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
FLT7R<5:0>: Assign PWM Fault Input 7 (FLT7) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
FLT6R<5:0>: Assign PWM Fault Input 6 (FLT6) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
DS70318D-page 172
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-13: RPINR33: PERIPHERAL PIN SELECT INPUT REGISTER 33
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
SYNCI1R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
FLT8R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
SYNCI1R<5:0>: Assign PWM Master Time Base External Synchronization Signal to the
Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
FLT8R<5:0>: Assign PWM Fault Input 8 (FLT8) to the Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 173
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-14: RPINR34: PERIPHERAL PIN SELECT INPUT REGISTER 34
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
—
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
SYNCI2R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-6
Unimplemented: Read as ‘0’
bit 5-0
SYNCI2R<5:0>: Assign PWM Master Time Base External Synchronization Signal to the
Corresponding RPn Pin bits
111111 = Input tied to VSS
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
REGISTER 10-15: RPOR0: PERIPHERAL PIN SELECT OUTPUT REGISTER 0
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP1R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP0R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP1R<5:0>: Peripheral Output Function is Assigned to RP1 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP0R<5:0>: Peripheral Output Function is Assigned to RP0 Output Pin bits
(see Table 10-2 for peripheral function numbers)
DS70318D-page 174
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-16: RPOR1: PERIPHERAL PIN SELECT OUTPUT REGISTER 1
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP3R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP2R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP3R<5:0>: Peripheral Output Function is Assigned to RP3 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP2R<5:0>: Peripheral Output Function is Assigned to RP2 Output Pin bits
(see Table 10-2 for peripheral function numbers)
REGISTER 10-17: RPOR2: PERIPHERAL PIN SELECT OUTPUT REGISTER 2
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP5R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP4R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP5R<5:0>: Peripheral Output Function is Assigned to RP5 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP4R<5:0>: Peripheral Output Function is Assigned to RP4 Output Pin bits
(see Table 10-2 for peripheral function numbers)
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 175
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-18: RPOR3: PERIPHERAL PIN SELECT OUTPUT REGISTER 3
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP7R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP6R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP7R<5:0>: Peripheral Output Function is Assigned to RP7 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP6R<5:0>: Peripheral Output Function is Assigned to RP6 Output Pin bits
(see Table 10-2 for peripheral function numbers)
REGISTER 10-19: RPOR4: PERIPHERAL PIN SELECT OUTPUT REGISTER 4
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP9R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP8R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP9R<5:0>: Peripheral Output Function is Assigned to RP9 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP8R<5:0>: Peripheral Output Function is Assigned to RP8 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is not implemented in the dsPIC33FJ06GS101 device.
DS70318D-page 176
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-20: RPOR5: PERIPHERAL PIN SELECT OUTPUT REGISTER 5
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP11R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP10R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP11R<5:0>: Peripheral Output Function is Assigned to RP11 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP10R<5:0>: Peripheral Output Function is Assigned to RP10 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is not implemented in the dsPIC33FJ06GS101 device.
REGISTER 10-21: RPOR6: PERIPHERAL PIN SELECT OUTPUT REGISTER 6
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP13R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP12R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP13R<5:0>: Peripheral Output Function is Assigned to RP13 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP12R<5:0>: Peripheral Output Function is Assigned to RP12 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is not implemented in the dsPIC33FJ06GS101 device.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 177
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-22: RPOR7: PERIPHERAL PIN SELECT OUTPUT REGISTER 7
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP15R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP14R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP15R<5:0>: Peripheral Output Function is Assigned to RP15 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP14R<5:0>: Peripheral Output Function is Assigned to RP14 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is not implemented in the dsPIC33FJ06GS101 device.
REGISTER 10-23: RPOR8: PERIPHERAL PIN SELECT OUTPUT REGISTER 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP17R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP16R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP17R<5:0>: Peripheral Output Function is Assigned to RP17 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP16R<5:0>: Peripheral Output Function is Assigned to RP16 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is implemented in dsPIC33FJ16GS404 and dsPIC33FJ16GS504 devices only.
DS70318D-page 178
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-24: RPOR9: PERIPHERAL PIN SELECT OUTPUT REGISTER 9
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP19R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP18R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP19R<5:0>: Peripheral Output Function is Assigned to RP19 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP18R<5:0>: Peripheral Output Function is Assigned to RP18 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is implemented in dsPIC33FJ16GS404 and dsPIC33FJ16GS504 devices only.
REGISTER 10-25: RPOR10: PERIPHERAL PIN SELECT OUTPUT REGISTER 10
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP21R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP20R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP21R<5:0>: Peripheral Output Function is Assigned to RP21 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP20R<5:0>: Peripheral Output Function is Assigned to RP20 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is implemented in dsPIC33FJ16GS404 and dsPIC33FJ16GS504 devices only.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 179
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-26: RPOR11: PERIPHERAL PIN SELECT OUTPUT REGISTER 11
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP23R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP22R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP23R<5:0>: Peripheral Output Function is Assigned to RP23 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP22R<5:0>: Peripheral Output Function is Assigned to RP22 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is implemented in dsPIC33FJ16GS404 and dsPIC33FJ16GS504 devices only.
REGISTER 10-27: RPOR12: PERIPHERAL PIN SELECT OUTPUT REGISTER 12
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP25R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP24R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP25R<5:0>: Peripheral Output Function is Assigned to RP25 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP24R<5:0>: Peripheral Output Function is Assigned to RP24 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is implemented in dsPIC33FJ16GS404 and dsPIC33FJ16GS504 devices only.
DS70318D-page 180
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-28: RPOR13: PERIPHERAL PIN SELECT OUTPUT REGISTER 13
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP27R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP26R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP27R<5:0>: Peripheral Output Function is Assigned to RP27 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP26R<5:0>: Peripheral Output Function is Assigned to RP26 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is implemented in dsPIC33FJ16GS404 and dsPIC33FJ16GS504 devices only.
REGISTER 10-29: RPOR14: PERIPHERAL PIN SELECT OUTPUT REGISTER 14
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP29R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP28R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP29R<5:0>: Peripheral Output Function is Assigned to RP29 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP28R<5:0>: Peripheral Output Function is Assigned to RP28 Output Pin bits
(see Table 10-2 for peripheral function numbers)
Note 1: This register is implemented in dsPIC33FJ16GS404 and dsPIC33FJ16GS504 devices only.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 181
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 10-30: RPOR16: PERIPHERAL PIN SELECT OUTPUT REGISTER 16
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP33R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP32R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP33R<5:0>: Peripheral Output Function is Assigned to RP33 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP32R<5:0>: Peripheral Output Function is Assigned to RP32 Output Pin bits
(see Table 10-2 for peripheral function numbers)
REGISTER 10-31: RPOR17: PERIPHERAL PIN SELECT OUTPUT REGISTER 17
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP35R<5:0>
bit 15
bit 8
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
RP34R<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-8
RP35R<5:0>: Peripheral Output Function is Assigned to RP35 Output Pin bits
(see Table 10-2 for peripheral function numbers)
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RP34R<5:0>: Peripheral Output Function is Assigned to RP34 Output Pin bits
(see Table 10-2 for peripheral function numbers)
DS70318D-page 182
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
11.0
Note:
The Timer1 module can operate in one of the following
modes:
TIMER1
This data sheet summarizes the features of
the
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04
families
of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 11. “Timers”
(DS70205), which is available from the
Microchip web site (www.microchip.com).
•
•
•
•
In Timer and Gated Timer modes, the input clock is
derived from the internal instruction cycle clock (FCY).
In Synchronous and Asynchronous Counter modes,
the input clock is derived from the external clock input
at the T1CK pin.
The Timer modes are determined by the following bits:
The Timer1 module is a 16-bit timer, which can serve
as a time counter for the Real-Time Clock (RTC), or
operate as a free-running interval timer/counter.
• Timer Clock Source Control bit (TCS): T1CON<1>
• Timer Synchronization Control bit (TSYNC):
T1CON<2>
• Timer Gate Control bit (TGATE): T1CON<6>
The Timer1 module has the following unique features
over other timers:
The timer control bit settings for different operating
modes are given in the Table 11-1.
• Can be operated from the low-power 32 kHz
crystal oscillator available on the device
• Can be operated in Asynchronous Counter mode
from an external clock source.
• The external clock input (T1CK) can optionally be
synchronized to the internal device clock and the
clock synchronization is performed after the
prescaler.
TABLE 11-1:
TIMER MODE SETTINGS
Mode
The unique features of Timer1 allow it to be used for
Real-Time Clock (RTC) applications. A block diagram
of Timer1 is shown in Figure 11-1.
FIGURE 11-1:
Timer mode
Gated Timer mode
Synchronous Counter mode
Asynchronous Counter mode
TCS
TGATE
TSYNC
Timer
0
0
x
Gated Timer
0
1
x
Synchronous
Counter
1
x
1
Asynchronous
Counter
1
x
0
16-BIT TIMER1 MODULE BLOCK DIAGRAM
Falling Edge
Detect
Gate
Sync
1
Set T1IF Flag
0
FCY
Prescaler
(/n)
10
TCKPS<1:0>
00
TMR1
Reset
TGATE
1
x1
T1CK
Prescaler
(/n)
Sync
TSYNC
TCKPS<1:0>
© 2009 Microchip Technology Inc.
Comparator
0
Equal
TGATE
TCS
Preliminary
PR1
DS70318D-page 183
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 11-1:
T1CON: TIMER1 CONTROL REGISTER
R/W-0
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
TON
—
TSIDL
—
—
—
—
—
bit 15
bit 8
U-0
R/W-0
—
TGATE
R/W-0
R/W-0
TCKPS<1:0>
U-0
R/W-0
R/W-0
U-0
—
TSYNC
TCS
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
TON: Timer1 On bit
1 = Starts 16-bit Timer1
0 = Stops 16-bit Timer1
bit 14
Unimplemented: Read as ‘0’
bit 13
TSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12-7
Unimplemented: Read as ‘0’
bit 6
TGATE: Timer1 Gated Time Accumulation Enable bit
When T1CS = 1:
This bit is ignored.
When T1CS = 0:
1 = Gated time accumulation enabled
0 = Gated time accumulation disabled
bit 5-4
TCKPS<1:0> Timer1 Input Clock Prescale Select bits
11 = 1:256
10 = 1:64
01 = 1:8
00 = 1:1
bit 3
Unimplemented: Read as ‘0’
bit 2
TSYNC: Timer1 External Clock Input Synchronization Select bit
When TCS = 1:
1 = Synchronize external clock input
0 = Do not synchronize external clock input
When TCS = 0:
This bit is ignored.
bit 1
TCS: Timer1 Clock Source Select bit
1 = External clock from T1CK pin (on the rising edge)
0 = Internal clock (FCY)
bit 0
Unimplemented: Read as ‘0’
DS70318D-page 184
Preliminary
x = Bit is unknown
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
12.0
Note:
• External clock input (TxCK) is always synchronized
to the internal device clock and the clock
synchronization is performed after the prescaler.
TIMER2/3 FEATURES
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04
families
of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 11. “Timers”
(DS70205), which is available on the Microchip web site (www.microchip.com).
Figure 12-1 shows a block diagram of the Type B timer.
Timer3 is a Type C timer that offers the following major
features:
• A Type C timer can be concatenated with a
Type B timer to form a 32-bit timer
• The external clock input (TxCK) is always
synchronized to the internal device clock and the
clock synchronization is performed before the
prescaler
Timer2 is a Type B timer that offers the following major
features:
A block diagram of the Type C timer is shown in
Figure 12-2.
• A Type B timer can be concatenated with a
Type C timer to form a 32-bit timer
FIGURE 12-1:
Note:
Timer3 is not available on all devices.
TYPE B TIMER BLOCK DIAGRAM (x = 2)
Gate
Sync
Falling Edge
Detect
1
Set TxIF Flag
0
FCY
Prescaler
(/n)
10
00
TCKPS<1:0>
Prescaler
(/n)
Sync
x1
Comparator
TxCK
TCKPS<1:0>
Reset
TGATE
Equal
TGATE
TCS
FIGURE 12-2:
TMRx
PRx
TYPE C TIMER BLOCK DIAGRAM (x = 3)
Gate
Sync
Falling Edge
Detect
1
Set TxIF Flag
0
FCY
Prescaler
(/n)
10
00
TCKPS<1:0>
Sync
Prescaler
(/n)
x1
Comparator
TxCK
TCKPS<1:0>
Reset
TGATE
Equal
TGATE
TCS
© 2009 Microchip Technology Inc.
TMRx
Preliminary
PRx
DS70318D-page 185
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
The Timer2/3 module can operate in one of the
following modes:
• Timer mode
• Gated Timer mode
• Synchronous Counter mode
In Timer and Gated Timer modes, the input clock is
derived from the internal instruction cycle clock (FCY).
In Synchronous Counter mode, the input clock is
derived from the external clock input at the TxCK pin.
The timer modes are determined by the following bits:
• TCS (TxCON<1>): Timer Clock Source Control bit
• TGATE (TxCON<6>): Timer Gate Control bit
When configured for 32-bit operation, only the Type B
Timer Control (TxCON) register bits are required for
setup and control while the Type C Timer Control
register bits are ignored (except the TSIDL bit).
For interrupt control, the combined 32-bit timer uses
the interrupt enable, interrupt flag and interrupt priority
control bits of the Type C timer. The interrupt control
and status bits for the Type B timer are ignored
during 32-bit timer operation.
The Timer2 and Timer 3 that can be combined to form a
32-bit timer are listed in Table 12-2.
TABLE 12-2:
Timer control bit settings for different operating modes
are given in the Table 12-1.
TABLE 12-1:
TIMER MODE SETTINGS
Mode
TCS
TGATE
Timer
0
0
Gated Timer
0
1
Synchronous Counter
1
x
12.1
1.
2.
3.
5.
6.
Clear the T32 bit corresponding to that timer.
Select the timer prescaler ratio using the
TCKPS<1:0> bits.
Set the Clock and Gating modes using the TCS
and TGATE bits.
Load the timer period value into the PRx
register.
If interrupts are required, set the interrupt enable
bit, TxIE. Use the priority bits, TxIP<2:0>, to set
the interrupt priority.
Set the TON bit.
12.2
32-Bit Operation
A 32-bit timer module can be formed by combining a
Type B and a Type C 16-bit timer module. For 32-bit
timer operation, the T32 control bit in the Type B Timer
Control (TxCON<3>) register must be set. The Type C
timer holds the most significant word (msw) and the
Type B timer holds the least significant word (lsw)
for 32-bit operation.
DS70318D-page 186
Type C Timer (msw)
Timer2
Timer3
To configure the features of Timer2/3 for 32-bit
operation:
16-Bit Operation
1.
2.
4.
Type B Timer (lsw)
A block diagram representation of the 32-bit timer
module is shown in Figure 12-3. The 32-timer module
can operate in one of the following modes:
• Timer mode
• Gated Timer mode
• Synchronous Counter mode
To configure any of the timers for individual 16-bit
operation:
3.
32-BIT TIMER
4.
5.
6.
Set the T32 control bit.
Select the prescaler ratio for Timer2 using the
TCKPS<1:0> bits.
Set the Clock and Gating modes using the
corresponding TCS and TGATE bits.
Load the timer period value. PR3 contains the
most significant word of the value, while PR2
contains the least significant word.
If interrupts are required, set the interrupt enable
bit, T3IE. Use the priority bits, T3IP<2:0>, to set
the interrupt priority. While Timer2 controls the
timer, the interrupt appears as a Timer3
interrupt.
Set the corresponding TON bit.
The timer value at any point is stored in the register
pair, TMR3:TMR2, which always contains the most
significant word of the count, while TMR2 contains the
least significant word.
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 12-3:
32-BIT TIMER BLOCK DIAGRAM
Gate
Sync
Falling Edge
Detect
1
Set TyIF
Flag
PRy
PRx
0
Equal
Comparator
Prescaler
(/n)
10
TCKPS<1:0>
00
FCY
Prescaler
(/n)
TxCK
TCKPS<1:0>
msw
lsw
Sync
TGATE
TMRx(1)
TMRy(2)
Reset
x1
TGATE
TMRyHLD
TCS
Data Bus <15:0>
Note 1:
Timerx is a Type B Timer (x = 2).
2:
Timery is a Type C Timer (y = 3).
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 187
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 12-1:
TxCON: TIMER CONTROL REGISTER (x = 2)
R/W-0
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
TON
—
TSIDL
—
—
—
—
—
bit 15
bit 8
U-0
R/W-0
—
TGATE
R/W-0
R/W-0
TCKPS<1:0>
R/W-0
(1)
T32
U-0
R/W-0
U-0
—
TCS
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
TON: Timerx On bit
When T32 = 1 (in 32-Bit Timer mode):
1 = Starts 32-bit TMRx:TMRy timer pair
0 = Stops 32-bit TMRx:TMRy timer pair
When T32 = 0 (in 16-Bit Timer mode):
1 = Starts 16-bit timer
0 = Stops 16-bit timer
bit 14
Unimplemented: Read as ‘0’
bit 13
TSIDL: Stop in Idle Mode bit
1 = Discontinue timer operation when device enters Idle mode
0 = Continue timer operation in Idle mode
bit 12-7
Unimplemented: Read as ‘0’
bit 6
TGATE: Timerx Gated Time Accumulation Enable bit
When TCS = 1:
This bit is ignored.
When TCS = 0:
1 = Gated time accumulation enabled
0 = Gated time accumulation disabled
bit 5-4
TCKPS<1:0>: Timerx Input Clock Prescale Select bits
11 = 1:256 prescale value
10 = 1:64 prescale value
01 = 1:8 prescale value
00 = 1:1 prescale value
bit 3
T32: 32-Bit Timerx Mode Select bit
1 = TMRx and TMRy form a 32-bit timer
0 = TMRx and TMRy form separate 16-bit timer
bit 2
Unimplemented: Read as ‘0’
bit 1
TCS: Timerx Clock Source Select bit
1 = External clock from TxCK pin
0 = Internal clock (FOSC/2)
bit 0
Unimplemented: Read as ‘0’
DS70318D-page 188
Preliminary
x = Bit is unknown
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 12-2:
TyCON: TIMER CONTROL REGISTER (y = 3)
R/W-0
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
TON(2)
—
TSIDL(1)
—
—
—
—
—
bit 15
bit 8
U-0
R/W-0
—
TGATE(2)
R/W-0
R/W-0
TCKPS<1:0>(2)
U-0
U-0
R/W-0
U-0
—
—
TCS(2)
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
TON: Timery On bit(2)
1 = Starts 16-bit Timery
0 = Stops 16-bit Timery
bit 14
Unimplemented: Read as ‘0’
bit 13
TSIDL: Stop in Idle Mode bit(1)
1 = Discontinue timer operation when device enters Idle mode
0 = Continue timer operation in Idle mode
bit 12-7
Unimplemented: Read as ‘0’
bit 6
TGATE: Timery Gated Time Accumulation Enable bit(2)
When TCS = 1:
This bit is ignored.
When TCS = 0:
1 = Gated time accumulation enabled
0 = Gated time accumulation disabled
bit 5-4
TCKPS<1:0>: Timery Input Clock Prescale Select bits(2)
11 = 1:256 prescale value
10 = 1:64 prescale value
01 = 1:8 prescale value
00 = 1:1 prescale value
bit 3-2
Unimplemented: Read as ‘0’
bit 1
TCS: Timery Clock Source Select bit(2)
1 = External clock from TxCK pin
0 = Internal clock (FOSC/2)
bit 0
Unimplemented: Read as ‘0’
x = Bit is unknown
Note 1: When 32-bit timer operation is enabled (T32 = 1) in the Timer Control register (TxCON<3>), the TSIDL bit
must be cleared to operate the 32-bit timer in Idle mode.
2: When the 32-bit timer operation is enabled (T32 = 1) in the Timer Control (TxCON<3>) register, these bits
have no effect.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 189
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 190
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
13.0
INPUT CAPTURE
Note:
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 12. “Input
Capture” (DS70198), which is available
on
the
Microchip
web
site
(www.microchip.com).
• Simple Capture Event modes:
- Capture timer value on every falling edge of
input at ICx pin
- Capture timer value on every rising edge of
input at ICx pin
• Capture timer value on every edge (rising and
falling)
• Prescaler Capture Event modes:
- Capture timer value on every 4th rising edge
of input at ICx pin
- Capture timer value on every 16th rising
edge of input at ICx pin
The input capture module is useful in applications
requiring frequency (period) and pulse measurement.
The
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices support up to two
input capture channels.
Each input capture channel can select one of the
two 16-bit timers (Timer2 or Timer3) for the time
base. The selected timer can use either an internal
or external clock.
The input capture module captures the 16-bit value of
the selected Time Base register when an event occurs
at the ICx pin. The events that cause a capture event
are listed below in three categories:
• Device wake-up from capture pin during CPU
Sleep and Idle modes
• Interrupt on input capture event
• 4-word FIFO buffer for capture values
- Interrupt optionally generated after 1, 2, 3 or
4 buffer locations are filled
• Use of input capture to provide additional sources
of external interrupts
FIGURE 13-1:
Other operational features include:
INPUT CAPTURE BLOCK DIAGRAM
From 16-Bit Timers
TMR2 TMR3
16
16
1
Edge Detection Logic
and
Clock Synchronizer
Prescaler
Counter
(1, 4, 16)
ICx Pin
ICM<2:0> (ICxCON<2:0>)
Mode Select
ICTMR
(ICxCON<7>)
FIFO
3
0
FIFO
R/W
Logic
ICOV, ICBNE (ICxCON<4:3>)
ICxBUF
ICxI<1:0>
ICxCON
System Bus
Interrupt
Logic
Set Flag ICxIF
(in IFSx Register)
Note 1: An ‘x’ in a signal, register or bit name denotes the number of the capture channel.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 191
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
13.1
Input Capture Registers
REGISTER 13-1:
ICxCON: INPUT CAPTURE x CONTROL REGISTER (x = 1, 2)
U-0
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
—
—
ICSIDL
—
—
—
—
—
bit 15
bit 8
R/W-0
R/W-0
ICTMR
R/W-0
ICI<1:0>
R-0, HC
R-0, HC
ICOV
ICBNE
R/W-0
R/W-0
R/W-0
ICM<2:0>
bit 7
bit 0
Legend:
HC = Hardware Clearable bit
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13
ICSIDL: Input Capture Module Stop in Idle Control bit
1 = Input capture module halts in CPU Idle mode
0 = Input capture module continues to operate in CPU Idle mode
bit 12-8
Unimplemented: Read as ‘0’
bit 7
ICTMR: Input Capture Timer Select bits
1 = TMR2 contents are captured on capture event
0 = TMR3 contents are captured on capture event
bit 6-5
ICI<1:0>: Select Number of Captures per Interrupt bits
11 = Interrupt on every fourth capture event
10 = Interrupt on every third capture event
01 = Interrupt on every second capture event
00 = Interrupt on every capture event
bit 4
ICOV: Input Capture Overflow Status Flag bit (read-only)
1 = Input capture overflow occurred
0 = No input capture overflow occurred
bit 3
ICBNE: Input Capture Buffer Empty Status bit (read-only)
1 = Input capture buffer is not empty, at least one more capture value can be read
0 = Input capture buffer is empty
bit 2-0
ICM<2:0>: Input Capture Mode Select bits
111 = Input capture functions as interrupt pin only when device is in Sleep or Idle mode. Rising edge
detect-only, all other control bits are not applicable.
110 = Unused (module disabled)
101 = Capture mode, every 16th rising edge
100 = Capture mode, every 4th rising edge
011 = Capture mode, every rising edge
010 = Capture mode, every falling edge
001 = Capture mode, every edge (rising and falling). ICI<1:0> bits do not control interrupt generation
for this mode.
000 = Input capture module turned off
DS70318D-page 192
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
14.0
Note:
OUTPUT COMPARE
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 13. “Output
Compare” (DS70209), which is available
on
the
Microchip
web
site
(www.microchip.com).
The output compare module can select either Timer2 or
Timer3 for its time base. The module compares the
value of the timer with the value of one or two Compare
registers depending on the operating mode selected.
FIGURE 14-1:
The state of the output pin changes when the timer
value matches the Compare register value. The output
compare module generates either a single output
pulse, or a sequence of output pulses, by changing the
state of the output pin on the compare match events.
The output compare module can also generate
interrupts on compare match events.
The output compare module has multiple operating
modes:
•
•
•
•
•
•
•
Active-Low One-Shot mode
Active-High One-Shot mode
Toggle mode
Delayed One-Shot mode
Continuous Pulse mode
PWM mode without Fault Protection
PWM mode with Fault Protection
OUTPUT COMPARE MODULE BLOCK DIAGRAM
Set Flag bit
OCxIF
OCxRS
Output
Logic
OCxR
3
16
1
OCx
Output Enable
OCM<2:0>
Mode Select
Comparator
0
S Q
R
OCTSEL
0
1
TMR2
Rollover
TMR3
Rollover
OCFA
16
TMR2 TMR3
Note: An ‘x’ in a signal, register or bit name denotes the number of the output compare channels.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 193
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
14.1
application must disable the associated timer when
writing to the Output Compare Control registers to
avoid malfunctions.
Output Compare Modes
Configure the Output Compare modes by setting the
appropriate Output Compare Mode (OCM<2:0>) bits in
the Output Compare Control (OCxCON<2:0>) register.
Table 14-1 lists the different bit settings for the Output
Compare modes. Figure 14-2 illustrates the output
compare operation for various modes. The user
TABLE 14-1:
Note:
Refer to Section 13. “Output Compare”
in the “dsPIC33F Family Reference Manual” (DS7029) for OCxR and OCxRS register restrictions.
OUTPUT COMPARE MODES
OCM<2:0>
Mode
OCx Pin Initial State
OCx Interrupt Generation
Controlled by GPIO register
—
000
Module Disabled
001
Active-Low One-Shot
0
OCx rising edge
010
Active-High One-Shot
1
OCx falling edge
011
Toggle
100
Delayed One-Shot
101
Continuous Pulse
110
PWM without Fault Protection
‘0’, if OCxR is zero
‘1’, if OCxR is non-zero
No interrupt
111
PWM with Fault Protection
‘0’, if OCxR is zero
‘1’, if OCxR is non-zero
OCFA falling edge for OC1 to OC4
FIGURE 14-2:
Current output is maintained
OCx rising and falling edge
0
OCx falling edge
0
OCx falling edge
OUTPUT COMPARE OPERATION
Output Compare
Mode Enabled
Timer is Reset on
Period Match
OCxRS
TMRy
OCxR
Active-Low One-Shot
(OCM = 001)
Active-High One-Shot
(OCM = 010)
Toggle
(OCM = 011)
Delayed One-Shot
(OCM = 100)
Continuous Pulse
(OCM = 101)
PWM
(OCM = 110 or 111)
DS70318D-page 194
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 14-1:
OCxCON: OUTPUT COMPARE x CONTROL REGISTER (x = 1, 2)
U-0
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
—
—
OCSIDL
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
R-0, HC
R/W-0
—
—
—
OCFLT
OCTSEL
R/W-0
R/W-0
R/W-0
OCM<2:0>
bit 7
bit 0
Legend:
HC = Hardware Clearable bit
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13
OCSIDL: Stop Output Compare in Idle Mode Control bit
1 = Output Compare x halts in CPU Idle mode
0 = Output Compare x continues to operate in CPU Idle mode
bit 12-5
Unimplemented: Read as ‘0’
bit 4
OCFLT: PWM Fault Condition Status bit
1 = PWM Fault condition has occurred (cleared in hardware only)
0 = No PWM Fault condition has occurred (this bit is only used when OCM<2:0> = 111)
bit 3
OCTSEL: Output Compare Timer Select bit
1 = Timer3 is the clock source for Compare x
0 = Timer2 is the clock source for Compare x
bit 2-0
OCM<2:0>: Output Compare Mode Select bits
111 = PWM mode on OCx, Fault pin enabled
110 = PWM mode on OCx, Fault pin disabled
101 = Initialize OCx pin low, generate continuous output pulses on OCx pin
100 = Initialize OCx pin low, generate single output pulse on OCx pin
011 = Compare event toggles OCx pin
010 = Initialize OCx pin high, compare event forces OCx pin low
001 = Initialize OCx pin low, compare event forces OCx pin high
000 = Output compare channel is disabled
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 195
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 196
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
15.0
Note:
HIGH-SPEED PWM
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference
Manual”,
Section
43.
“High- Speed PWM” (DS70323), which is
available on the Microchip web site
(www.microchip.com).
The
high-speed
PWM
module
on
the
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 devices supports a wide variety of PWM modes
and output formats. This PWM module is ideal for
power conversion applications, such as:
•
•
•
•
•
•
•
Note:
Duty cycle, dead-time, phase shift and
frequency resolution is 8.32 ns in
Center-Aligned PWM mode.
Figure 15-1 conceptualizes the PWM module in a
simplified block diagram. Figure 15-2 illustrates how
the module hardware is partitioned for each PWM
output pair for the Complementary PWM mode. Each
functional unit of the PWM module is discussed in
subsequent sections.
15.2
Feature Description
The PWM module is designed for applications that
require:
Features Overview
The high-speed PWM module incorporates the
following features:
• 2-4 PWM generators with 4-8 outputs
• Individual time base and duty cycle for each of the
eight PWM outputs
• Dead time for rising and falling edges:
• Duty cycle resolution of 1.04 ns at 40 MIPS
• Dead-time resolution of 1.04 ns at 40 MIPS
• Phase shift resolution of 1.04 ns at 40 MIPS
• Frequency resolution of 1.04 ns at 40 MIPS
• PWM modes supported:
- Standard Edge-Aligned
- True Independent Output
- Complementary
- Center-Aligned
- Push-Pull
- Multiphase
- Variable Phase
- Fixed Off-Time
- Current Reset
- Current-Limit
• Independent Fault/Current-Limit inputs for each of
the eight PWM outputs
• Output override control
• Special Event Trigger
• PWM capture feature
• Prescaler for input clock
© 2009 Microchip Technology Inc.
Dual trigger from PWM to ADC
PWMxH, PWMxL output pin swapping
PWM4H, PWM4L pins remappable
On-the-fly PWM frequency, duty cycle and phase
shift changes
• Disabling of Individual PWM generators to reduce
power consumption
• Leading-Edge Blanking (LEB) functionality
The PWM module contains four PWM generators. The
module has up to eight PWM output pins: PWM1H,
PWM1L, PWM2H, PWM2L, PWM3H, PWM3L,
PWM4H and PWM4L. For complementary outputs,
these eight I/O pins are grouped into H/L pairs.
AC/DC Converters
DC/DC Converters
Power Factor Correction(PFC)
Uninterruptible Power Supply (UPS)
Inverters
Battery Chargers
Digital Lighting
15.1
•
•
•
•
• High-resolution at high PWM frequencies
• The ability to drive Standard, Edge-Aligned,
Center-Aligned Complementary mode, and
Push-Pull mode outputs
• The ability to create multiphase PWM outputs
For Center-Aligned mode, the duty cycle, period phase
and dead-time resolutions will be 8 ns.
Two common, medium power converter topologies are
push-pull and half-bridge. These designs require the
PWM output signal to be switched between alternate
pins, as provided by the Push-Pull PWM mode.
Phase-shifted PWM describes the situation where
each PWM generator provides outputs, but the phase
relationship between the generator outputs is
specifiable and changeable.
Multiphase PWM is often used to improve DC/DC
converter load transient response, and reduce the size
of output filter capacitors and inductors. Multiple DC/DC
converters are often operated in parallel, but
phase-shifted in time. A single PWM output operating at
250 kHz has a period of 4 μs, but an array of four PWM
channels, staggered by 1 μs each, yields an effective
switching frequency of 1 MHz. Multiphase PWM
applications typically use a fixed-phase relationship.
Variable phase PWM is useful in Zero Voltage
Transition (ZVT) power converters. Here, the PWM
duty cycle is always 50%, and the power flow is
controlled by varying the relative phase shift between
the two PWM generators.
Preliminary
DS70318D-page 197
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 15-1:
SIMPLIFIED CONCEPTUAL BLOCK DIAGRAM OF HIGH-SPEED PWM
PWMCONx
Pin and Mode Control
LEBCONx
Control for Blanking External Input Signals
TRGCONx
ADC Trigger Control
Dead-Time Control
ALTDTRx, DTRx
PTCON
PWM Enable and Mode Control
MDC
Master Duty Cycle Register
PDC1
MUX
Latch
PWM GEN 1
Comparator
Channel 1
Dead-Time Generator
PWM1H
Channel 2
Dead-Time Generator
PWM2H
PWM1L
Timer
Phase
MUX
16-bit Data Bus
Latch
PWM GEN 2
Comparator
Timer
Phase
PDC3
MUX
Latch
PWM GEN 3
Comparator
Timer
Phase
PWM2L
Fault CLMT Override Logic
PWM User, Current-Limit and Fault Override and Routing Logic
PDC2
Channel 3
Dead-Time Generator
PWM3H
PWM3L
PDC4
MUX
PWM GEN 4
Latch
PWM4H(1)
Channel 4
Dead-Time Generator
Comparator
PWM4L(1)
Timer
Phase
PTPER
Timer Period
Fault Control
Logic
Master Time Base
Special Event
Postscaler
Comparator
SEVTCMP
IOCONx
FCLCONx
SYNCO(1)
SYNCIX(1)
External Time Base
Synchronization
PTMR
FLTX(1)
Special Event
Trigger
Special Event
Comparison Value
Pin Override Control
Fault Mode and Pin Control
Note 1: These pins are remappable.
DS70318D-page 198
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 15-2:
PARTITIONED OUTPUT PAIR, COMPLEMENTARY PWM MODE
Phase Offset
TMR < PDC
Timer/Counter
PWM
Dead-Time
Override
Logic
Logic
M
U
X
PWMXH
M
U
X
PWMXL
Duty Cycle Comparator
PWM Duty Cycle Register
Channel Override Values
Fault Override Values
Fault Pin
15.3
Fault Active
Fault Pin Assignment Logic
Control Registers
The following registers control the operation of the
high-speed PWM module.
•
•
•
•
•
•
•
•
•
•
PTCON: PWM Time Base Control Register
PTCON2: PWM Clock Divider Select Register
PTPER: PWM Master Time Base Register(1)
SEVTCMP: PWM Special Event Compare
Register
MDC: PWM Master Duty Cycle Register
PWMCONx: PWMx Control Register
PDCx: PWMx Generator Duty Cycle Register
PHASEx: PWMx Primary Phase Shift Register
(PHASEx Register provides the local time base
period for PWMxH)
DTRx: PWMx Dead-Time Register
ALTDTRx: PWMx Alternate Dead-Time Register
© 2009 Microchip Technology Inc.
• SDCx: PWMx Secondary Duty Cycle Register
• SPHASEx: PWMx Secondary Phase Shift
Register (Provides the local time base for
PWMxL)
• TRGCONx: PWMx Trigger Control Register
• IOCONx: PWMx I/O Control Register
• FCLCONx: PWMx Fault Current-Limit Control
Register
• TRIGx: PWMx Primary Trigger Compare Value
Register
• STRIGx: PWMx Secondary Trigger Compare
Value Register
• LEBCONx: Leading-Edge Blanking Control
Register
• PWMCAPx: Primary PWMx Time Base Capture
Register
Preliminary
DS70318D-page 199
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-1:
R/W-0
PTEN
bit 15
R/W-0
(1)
bit 12
bit 11
bit 10
bit 9
bit 8
bit 7
bit 6
bit 5-4
bit 3-0
R/W-0
HS/HC-0
R/W-0
R/W-0
—
PTSIDL
SESTAT
SEIEN
EIPU(1)
U-0
R/W-0
R/W-0
R/W-0
R/W-0
SYNCSRC<1:0>
(1)
R/W-0
R/W-0
SYNCPOL(1) SYNCOEN(1)
bit 8
R/W-0
SEVTPS<3:0>
R/W-0
(1)
bit 0
Legend:
R = Readable bit
-n = Value at POR
bit 14
bit 13
U-0
—
SYNCEN
bit 7
bit 15
PTCON: PWM TIME BASE CONTROL REGISTER
HC = Hardware Clearable bit
W = Writable bit
‘1’ = Bit is set
HS = Hardware Settable bit
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
PTEN: PWM Module Enable bit
1 = PWM module is enabled
0 = PWM module is disabled
Unimplemented: Read as ‘0’
PTSIDL: PWM Time Base Stop in Idle Mode bit
1 = PWM time base halts in CPU Idle mode
0 = PWM time base runs in CPU Idle mode
SESTAT: Special Event Interrupt Status bit
1 = Special event interrupt is pending
0 = Special event interrupt is not pending
SEIEN: Special Event Interrupt Enable bit
1 = Special event interrupt is enabled
0 = Special event interrupt is disabled
EIPU: Enable Immediate Period Updates bit(1)
1 = Active Period register is updated immediately
0 = Active Period register updates occur on PWM cycle boundaries
SYNCPOL: Synchronization Input/Output Polarity bit(1)
1 = SYNCIx and SYNCO polarity is inverted (active-low)
0 = SYNCIx and SYNCO are active-high
SYNCOEN: Primary Time Base Sync Enable bit(1)
1 = SYNCO output is enabled
0 = SYNCO output is disabled
SYNCEN: External Time Base Synchronization Enable bit(1)
1 = External synchronization of primary time base is enabled
0 = External synchronization of primary time base is disabled
Unimplemented: Read as ‘0’
SYNCSRC<1:0>: Synchronous Source Selection bits(1)
00 = SYNCI1
01 = SYNCI2
10 = Reserved
11 = Reserved
SEVTPS<3:0>: PWM Special Event Trigger Output Postscaler Select bits(1)
0000 = 1:1 Postscaler generates a Special Event Trigger on every compare match event
0001 = 1:2 Postscaler generates a Special Event Trigger on every second compare match event
•
•
•
1111 = 1:16 Postscaler generates a Special Event Trigger trigger on every sixteenth compare match event
Note 1: These bits should be changed only when PTEN = 0. In addition, when using the SYNCIx feature, the user
application must program the period register with a value that is slightly larger than the expected period of
the external synchronization input signal.
DS70318D-page 200
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-2:
PTCON2: PWM CLOCK DIVIDER SELECT REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
—
—
U-0
—
U-0
—
U-0
R/W-0
R/W-0
R/W-0
PCLKDIV<2:0>(1)
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-3
Unimplemented: Read as ‘0’
bit 2-0
PCLKDIV<2:0>: PWM Input Clock Prescaler (Divider) Select bits(1)
000 = Divide by 1, maximum PWM timing resolution (power-on default)
001 = Divide by 2, maximum PWM timing resolution
010 = Divide by 4, maximum PWM timing resolution
011 = Divide by 8, maximum PWM timing resolution
100 = Divide by 16, maximum PWM timing resolution
101 = Divide by 32, maximum PWM timing resolution
110 = Divide by 64, maximum PWM timing resolution
111 = Reserved
Note 1: These bits should be changed only when PTEN = 0. Changing the clock selection during operation will
yield unpredictable results.
REGISTER 15-3:
R/W-1
PTPER: PWM MASTER TIME BASE REGISTER(1)
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
PTPER <15:8>
bit 15
bit 8
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-0
R/W-0
R/W-0
PTPER <7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-0
x = Bit is unknown
PTPER<15:0>: PWM Master Time Base (PMTMR) Period Value bits
Note 1: The minimum value that can be loaded into the PTPER register is 0x0010 and the maximum value is
0xFFF8.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 201
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-4:
R/W-0
SEVTCMP: PWM SPECIAL EVENT COMPARE REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
SEVTCMP <15:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
SEVTCMP <7:3>
U-0
U-0
U-0
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-3
SEVTCMP<15:3>: Special Event Compare Count Value bits
bit 2-0
Unimplemented: Read as ‘0’
REGISTER 15-5:
R/W-0
x = Bit is unknown
MDC: PWM MASTER DUTY CYCLE REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
MDC<15:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
MDC<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-0
x = Bit is unknown
MDC<15:0>: Master PWM Duty Cycle Value bits
Note 1: The smallest pulse width that can be generated on the PWM output corresponds to a value of 0x0008,
while the maximum pulse width generated corresponds to a value of Period – 0x0008.
2: As the duty cycle gets closer to 0% or 100% of the PWM period (0 ns-40 ns, depending on the mode of
operation), the PWM duty cycle resolution will degrade from 1 LSB to 3 LSB.
DS70318D-page 202
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-6:
HS/HC-0
FLTSTAT
PWMCONx: PWMx CONTROL REGISTER
HS/HC-0
(1)
CLSTAT
(1)
HS/HC-0
TRGSTAT
R/W-0
R/W-0
FLTIEN
CLIEN
R/W-0
R/W-0
TRGIEN
ITB
(3)
R/W-0
MDCS(3)
bit 15
bit 8
R/W-0
R/W-0
DTC<1:0>
U-0
—
U-0
U-0
—
—
R/W-0
CAM
R/W-0
(2,3)
(4)
XPRES
R/W-0
IUE
bit 7
bit 0
Legend:
HC = Hardware Clearable bit
HS = Hardware Settable bit
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
FLTSTAT: Fault Interrupt Status bit(1)
1 = Fault interrupt is pending
0 = No Fault interrupt is pending. This bit is cleared by setting FLTIEN = 0.
bit 14
CLSTAT: Current-Limit Interrupt Status bit(1)
1 = Current-limit interrupt is pending
0 = No current-limit interrupt is pending. This bit is cleared by setting CLIEN = 0.
bit 13
TRGSTAT: Trigger Interrupt Status bit
1 = Trigger interrupt is pending
0 = No trigger interrupt is pending. This bit is cleared by setting TRGIEN = 0.
bit 12
FLTIEN: Fault Interrupt Enable bit
1 = Fault interrupt is enabled
0 = Fault interrupt is disabled and the FLTSTAT bit is cleared
bit 11
CLIEN: Current-Limit Interrupt Enable bit
1 = Current-limit interrupt enabled
0 = Current-limit interrupt disabled and the CLSTAT bit is cleared
bit 10
TRGIEN: Trigger Interrupt Enable bit
1 = A trigger event generates an interrupt request
0 = Trigger event interrupts are disabled and the TRGSTAT bit is cleared
bit 9
ITB: Independent Time Base Mode bit(3)
1 = PHASEx/SPHASEx register provides time base period for this PWM generator
0 = PTPER register provides timing for this PWM generator
bit 8
MDCS: Master Duty Cycle Register Select bit(3)
1 = MDC register provides duty cycle information for this PWM generator
0 = PDCx/SDCx register provides duty cycle information for this PWM generator
bit 7-6
DTC<1:0>: Dead-Time Control bits
00 = Positive dead time actively applied for all output modes
01 = Negative dead time actively applied for all output modes
10 = Dead-time function is disabled
11 = Reserved
bit 5-3
Unimplemented: Read as ‘0’
Note 1: Software must clear the interrupt status here and the corresponding IFS bit in the interrupt controller.
2: The Independent Time Base mode (ITB = 1) must be enabled to use Center-Aligned mode. If ITB = 0, the
CAM bit is ignored.
3: These bits should be changed only when PTEN = 0. Changing the clock selection during operation will
yield unpredictable results.
4: To operate in External Period Reset mode, configure FCLCONx<CLMOD> = 0 and PWMCONx<ITB> = 1.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 203
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-6:
PWMCONx: PWMx CONTROL REGISTER (CONTINUED)
bit 2
CAM: Center-Aligned Mode Enable bit(2,3)
1 = Center-Aligned mode is enabled
0 = Center-Aligned mode is disabled
bit 1
XPRES: External PWM Reset Control bit(4)
1 = Current-limit source resets time base for this PWM generator if it is in Independent Time Base mode
0 = External pins do not affect PWM time base
bit 0
IUE: Immediate Update Enable bit
1 = Updates to the active MDC/PDCx/SDCx registers are immediate
0 = Updates to the active MDC/PDCx/SDCx registers are synchronized to the PWM time base
Note 1: Software must clear the interrupt status here and the corresponding IFS bit in the interrupt controller.
2: The Independent Time Base mode (ITB = 1) must be enabled to use Center-Aligned mode. If ITB = 0, the
CAM bit is ignored.
3: These bits should be changed only when PTEN = 0. Changing the clock selection during operation will
yield unpredictable results.
4: To operate in External Period Reset mode, configure FCLCONx<CLMOD> = 0 and PWMCONx<ITB> = 1.
DS70318D-page 204
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-7:
R/W-0
PDCx: PWMx GENERATOR DUTY CYCLE REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
PDCx<15:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
PDCx<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-0
x = Bit is unknown
PDCx<15:0>: PWM Generator # Duty Cycle Value bits
Note 1: In Independent PWM mode, the PDCx register controls the PWMxH duty cycle only. In Complementary,
Redundant and Push-Pull PWM modes, the PDCx register controls the duty cycle of both the PWMxH and
PWMxL. The smallest pulse width that can be generated on the PWM output corresponds to a value of
0x0008, while the maximum pulse width generated corresponds to a value of 0xFFEF.
2: As the duty cycle gets closer to 0% or 100% of the PWM period (0 ns-40 ns, depending on the mode of
operation), the PWM duty cycle resolution will degrade from 1 LSB to 3 LSB.
REGISTER 15-8:
R/W-0
SDCx: PWMx SECONDARY DUTY CYCLE REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
SDCx<15:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
SDCx<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-0
x = Bit is unknown
SDCx<15:0>: Secondary Duty Cycle for PWMxL Output Pin bits
Note 1: The SDCx register is used in Independent PWM mode only. When used in Independent PWM mode, the
SDCx register controls the PWMxL duty cycle. The smallest pulse width that can be generated on the
PWM output corresponds to a value of 0x0008, while the maximum pulse width generated corresponds to
a value of 0xFFEF.
2: As the duty cycle gets closer to 0% or 100% of the PWM period (0 ns-40 ns, depending on the mode of
operation), the PWM duty cycle resolution will degrade from 1 LSB to 3 LSB.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 205
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-9:
R/W-0
PHASEx: PWMx PRIMARY PHASE SHIFT REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
PHASEx<15:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
PHASEx<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-0
x = Bit is unknown
PHASEx<15:0>: PWM Phase Shift Value or Independent Time Base Period for this PWM Generator bits
Note 1: If PWMCONx<ITB> = 0, the following applies based on the mode of operation:
• Complementary, Redundant and Push-Pull Output mode (IOCONx<PMOD> = 00, 01, or 10)
PHASEx<15:0> = Phase shift value for PWMxH and PWMxL outputs
• True Independent Output mode (IOCONx<PMOD> = 11) PHASEx<15:0> = Phase shift value for
PWMxL only
2: If PWMCONx<ITB> = 1, the following applies based on the mode of operation:
• Complementary, Redundant, and Push-Pull Output mode (IOCONx<PMOD> = 00, 01, or 10)
PHASEx<15:0> = Independent time base period value for PWMxH and PWMxL
• True Independent Output mode (IOCONx<PMOD> = 11) PHASEx<15:0> = Independent time base
period value for PWMxL only
• The smallest pulse width that can be generated on the PWM output corresponds to a value of
0x0008, while the maximum pulse width generated corresponds to a value of Period - 0x0008.
DS70318D-page 206
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-10: SPHASEx: PWMx SECONDARY PHASE SHIFT REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
SPHASEx<15:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
SPHASEx<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15-0
x = Bit is unknown
SPHASEx<15:0>: Secondary Phase Offset for PWMxL Output Pin bits
(used in Independent PWM mode only)
Note 1: If PWMCONx<ITB> = 0, the following applies based on the mode of operation:
• Complementary, Redundant and Push-Pull Output mode (IOCONx<PMOD> = 00, 01, or 10)
SPHASEx<15:0> = Not used
• True Independent Output mode (IOCONx<PMOD> = 11) PHASEx<15:0> = Phase shift value for
PWMxL only
2: If PWMCONx<ITB> = 1, the following applies based on the mode of operation:
• Complementary, Redundant and Push-Pull Output mode (IOCONx<PMOD> = 00, 01, or 10)
SPHASEx<15:0> = Not used
• True Independent Output mode (IOCONx<PMOD> = 11) PHASEx<15:0> = Independent time base
period value for PWMxL only
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 207
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
.
REGISTER 15-11: DTRx: PWMx DEAD-TIME REGISTER
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
DTRx<13:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
DTRx<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-0
DTRx<13:0>: Unsigned 14-Bit Dead-Time Value for PWMx Dead-Time Unit bits
REGISTER 15-12: ALTDTRx: PWMx ALTERNATE DEAD-TIME REGISTER
U-0
U-0
—
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
ALTDTRx<13:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
ALTDTR <7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
Unimplemented: Read as ‘0’
bit 13-0
ALTDTRx<13:0>: Unsigned 14-Bit Dead-Time Value for PWMx Dead-Time Unit bits
DS70318D-page 208
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-13: TRGCONx: PWMx TRIGGER CONTROL REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
TRGDIV<3:0>
U-0
U-0
U-0
U-0
—
—
—
—
bit 15
bit 8
R/W-0
U-0
(1)
R/W-0
—
DTM
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGSTRT<5:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-12
TRGDIV<3:0>: Trigger # Output Divider bits
0000 = Trigger output for every trigger event
0001 = Trigger output for every 2nd trigger event
0010 = Trigger output for every 3rd trigger event
0011 = Trigger output for every 4th trigger event
0100 = Trigger output for every 5th trigger event
0101 = Trigger output for every 6th trigger event
0110 = Trigger output for every 7th trigger event
0111 = Trigger output for every 8th trigger event
1000 = Trigger output for every 9th trigger event
1001 = Trigger output for every 10th trigger event
1010 = Trigger output for every 11th trigger event
1011 = Trigger output for every 12th trigger event
1100 = Trigger output for every 13th trigger event
1101 = Trigger output for every 14th trigger event
1110 = Trigger output for every 15th trigger event
1111 = Trigger output for every 16th trigger event
bit 11-8
Unimplemented: Read as ‘0’
bit 7
DTM: Dual Trigger Mode bit(1)
1 = Secondary trigger event is combined with the primary trigger event to create the PWM trigger.
0 = Secondary trigger event is not combined with the primary trigger event to create the PWM trigger.
Two separate PWM triggers are generated.
bit 6
Unimplemented: Read as ‘0’
bit 5-0
TRGSTRT<5:0>: Trigger Postscaler Start Enable Select bits
000000 = Wait 0 PWM cycles before generating the first trigger event after the module is enabled
000001 = Wait 1 PWM cycles before generating the first trigger event after the module is enabled
000010 = Wait 1 PWM cycles before generating the first trigger event after the module is enabled
•
•
•
111111 = Wait 63 PWM cycles before generating the first trigger event after the module is enabled
Note 1:
The secondary generator cannot generate PWM trigger interrupts.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 209
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-14: IOCONx: PWMx I/O CONTROL REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
PENH
PENL
POLH
POLL
R/W-0
R/W-0
PMOD<1:0>(1)
R/W-0
R/W-0
OVRENH
OVRENL
bit 15
bit 8
R/W-0
R/W-0
OVRDAT<1:0>
R/W-0
R/W-0
R/W-0
FLTDAT<1:0>
R/W-0
CLDAT<1:0>
R/W-0
R/W-0
SWAP
OSYNC
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
PENH: PWMH Output Pin Ownership bit
1 = PWM module controls PWMxH pin
0 = GPIO module controls PWMxH pin
bit 14
PENL: PWML Output Pin Ownership bit
1 = PWM module controls PWMxL pin
0 = GPIO module controls PWMxL pin
bit 13
POLH: PWMH Output Pin Polarity bit
1 = PWMxH pin is active-low
0 = PWMxH pin is active-high
bit 12
POLL: PWML Output Pin Polarity bit
1 = PWMxL pin is active-low
0 = PWMxL pin is active-high
bit 11-10
PMOD<1:0>: PWM # I/O Pin Mode bits(1)
00 = PWM I/O pin pair is in the Complementary Output mode
01 = PWM I/O pin pair is in the Redundant Output mode
10 = PWM I/O pin pair is in the Push-Pull Output mode
11 = PWM I/O pin pair is in the True Independent Output mode
bit 9
OVRENH: Override Enable for PWMxH Pin bit
1 = OVRDAT<1> provides data for output on PWMxH pin
0 = PWM generator provides data for PWMxH pin
bit 8
OVRENL: Override Enable for PWMxL Pin bit
1 = OVRDAT<0> provides data for output on PWMxL pin
0 = PWM generator provides data for PWMxL pin
bit 7-6
OVRDAT<1:0>: Data for PWMxH and PWMxL Pins if Override is Enabled bits
If OVERENH = 1 then OVRDAT<1> provides data for PWMxH.
If OVERENL = 1 then OVRDAT<0> provides data for PWMxL.
bit 5-4
FLTDAT<1:0>: Data for PWMxH and PWMxL Pins if FLTMOD is Enabled bits
FCLCONx<IFLTMOD> = 0: Normal Fault mode:
If Fault active, then FLTDAT<1> provides data for PWMxH.
If Fault active, then FLTDAT<0> provides data for PWMxL.
FCLCONx<IFLTMOD> = 1: Independent Fault mode:
If current-limit active, then FLTDAT<1> provides data for PWMxH.
If Fault active, then FLTDAT<0> provides data for PWMxL.
Note 1: These bits should be changed only when PTEN = 0. Changing the clock selection during operation will
yield unpredictable results.
DS70318D-page 210
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-14: IOCONx: PWMx I/O CONTROL REGISTER (CONTINUED)
bit 3-2
CLDAT<1:0>: Data for PWMxH and PWMxL Pins if CLMODE is Enabled bits
FCLCONx<IFLTMOD> = 0: Normal Fault mode:
If current-limit active, then CLDAT<1> provides data for PWMxH.
If current-limit active, then CLDAT<0> provides data for PWMxL.
FCLCONx<IFLTMOD> = 1: Independent Fault mode:
CLDAT<1:0> is ignored.
bit 1
SWAP<1:0>: SWAP PWMxH and PWMxL pins
1 = PWMxH output signal is connected to PWMxL pin and PWMxL signal is connected to PWMxH pins
0 = PWMxH and PWMxL pins are mapped to their respective pins
bit 0
OSYNC: Output Override Synchronization bit
1 = Output overrides via the OVRDAT<1:0> bits are synchronized to the PWM time base
0 = Output overrides via the OVDDAT<1:0> bits occur on next CPU clock boundary
Note 1: These bits should be changed only when PTEN = 0. Changing the clock selection during operation will
yield unpredictable results.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 211
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-15: FCLCONx: PWMx FAULT CURRENT-LIMIT CONTROL REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
CLSRC<4:0>(2,3)
IFLTMOD
R/W-0
R/W-0
CLPOL(1)
CLMOD
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
FLTSRC<4:0>(2,3)
R/W-0
R/W-0
FLTPOL(1)
R/W-0
FLTMOD<1:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
IFLTMOD: Independent Fault Mode Enable bit
1 = Independent Fault mode: Current-limit input maps FLTDAT<1> to PWMxH output and Fault input
maps FLTDAT<0> to PWMxL output. The CLDAT<1:0> bits are not used for override functions.
0 = Normal Fault mode: Current-limit feature maps CLDAT<1:0> bits to the PWMxH and PWMxL
outputs. The PWM Fault feature maps FLTDAT<1:0> to the PWMxH and PWMxL outputs.
bit 14-10
CLSRC<4:0>: Current-Limit Control Signal Source Select for PWM # Generator bits(2,3)
00000 = Fault 1
00001 = Fault 2
00010 = Fault 3
00011 = Fault 4
00100 = Fault 5
00101 = Fault 6
00110 = Fault 7
00111 = Fault 8
01000 = Reserved
•
•
•
11111 = Reserved
bit 9
CLPOL: Current-Limit Polarity for PWM Generator # bit(1)
1 = The selected current-limit source is active-low
0 = The selected current-limit source is active-high
bit 8
CLMOD: Current-Limit Mode Enable bit for PWM Generator # bit
1 = Current-limit function is enabled
0 = Current-limit function is disabled
Note 1: These bits should be changed only when PTEN = 0. Changing the clock selection during operation will
yield unpredictable results.
2: When Independent Fault mode is enabled (IFLTMOD = 1), and Fault 1 is used for Current-Limit mode
(CLSRC<4:0> = b0000), the Fault Control Source Select bits (FLTSRC<4:0>) should be set to an unused
Fault source to prevent Fault 1 from disabling both the PWMxL and PWMxH outputs.
3: When Independent Fault mode is enabled (IFLTMOD = 1) and Fault 1 is used for Fault mode
(FLTSRC<4:0> = b0000), the Current-Limit Control Source Select bits (CLSRC<4:0>) should be set to an
unused current-limit source to prevent the current-limit source from disabling both the PWMxH and
PWMxL outputs.
DS70318D-page 212
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-15: FCLCONx: PWMx FAULT CURRENT-LIMIT CONTROL REGISTER (CONTINUED)
bit 7-3
FLTSRC<4:0>: Fault Control Signal Source Select for PWM Generator # bits(2,3)
00000 = Fault 1
00001 = Fault 2
00010 = Fault 3
00011 = Fault 4
00100 = Fault 5
00101 = Fault 6
00110 = Fault 7
00111 = Fault 8
01000 = Reserved
•
•
•
11111 = Reserved
bit 2
FLTPOL: Fault Polarity for PWM Generator # bit(1)
1 = The selected Fault source is active-low
0 = The selected Fault source is active-high
bit 1-0
FLTMOD<1:0>: Fault Mode for PWM Generator # bits
00 = The selected Fault source forces PWMxH, PWMxL pins to FLTDAT values (latched condition)
01 = The selected Fault source forces PWMxH, PWMxL pins to FLTDAT values (cycle)
10 = Reserved
11 = Fault input is disabled
Note 1: These bits should be changed only when PTEN = 0. Changing the clock selection during operation will
yield unpredictable results.
2: When Independent Fault mode is enabled (IFLTMOD = 1), and Fault 1 is used for Current-Limit mode
(CLSRC<4:0> = b0000), the Fault Control Source Select bits (FLTSRC<4:0>) should be set to an unused
Fault source to prevent Fault 1 from disabling both the PWMxL and PWMxH outputs.
3: When Independent Fault mode is enabled (IFLTMOD = 1) and Fault 1 is used for Fault mode
(FLTSRC<4:0> = b0000), the Current-Limit Control Source Select bits (CLSRC<4:0>) should be set to an
unused current-limit source to prevent the current-limit source from disabling both the PWMxH and
PWMxL outputs.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 213
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-16: TRIGx: PWMx PRIMARY TRIGGER COMPARE VALUE REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGCMP<15:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGCMP<7:3>
U-0
U-0
U-0
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-3
TRGCMP<15:3>: Trigger Control Value bits
When primary PWM functions in local time base, this register contains the compare values that can
trigger the ADC module.
bit 2-0
Unimplemented: Read as ‘0’
REGISTER 15-17: STRIGx: PWMx SECONDARY TRIGGER COMPARE VALUE REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
STRGCMP<15:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
STRGCMP<7:3>
U-0
U-0
U-0
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-3
STRGCMP<15:3>: Secondary Trigger Control Value bits
When secondary PWM functions in local time base, this register contains the compare values that can
trigger the ADC module.
bit 2-0
Unimplemented: Read as ‘0’
DS70318D-page 214
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-18: LEBCONx: LEADING-EDGE BLANKING CONTROL REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
PHR
PHF
PLR
PLF
FLTLEBEN
CLLEBEN
R/W-0
R/W-0
LEB<9:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
LEB<7:3>
U-0
U-0
U-0
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 15
PHR: PWMxH Rising Edge Trigger Enable bit
1 = Rising edge of PWMxH will trigger LEB counter
0 = LEB ignores rising edge of PWMxH
bit 14
PHF: PWMH Falling Edge Trigger Enable bit
1 = Falling edge of PWMxH will trigger LEB counter
0 = LEB ignores falling edge of PWMxH
bit 13
PLR: PWML Rising Edge Trigger Enable bit
1 = Rising edge of PWMxL will trigger LEB counter
0 = LEB ignores rising edge of PWMxL
bit 12
PLF: PWML Falling Edge Trigger Enable bit
1 = Falling edge of PWMxL will trigger LEB counter
0 = LEB ignores falling edge of PWMxL
bit 11
FLTLEBEN: Fault Input LEB Enable bit
1 = Leading-edge blanking is applied to selected Fault input
0 = Leading-edge blanking is not applied to selected Fault input
bit 10
CLLEBEN: Current-Limit LEB Enable bit
1 = Leading-edge blanking is applied to selected current-limit input
0 = Leading-edge blanking is not applied to selected current-limit input
bit 9-3
LEB: Leading-Edge Blanking for Current-Limit and Fault Inputs bits
Value is 8 nsec increments.
bit 2-0
Unimplemented: Read as ‘0’
© 2009 Microchip Technology Inc.
Preliminary
x = Bit is unknown
DS70318D-page 215
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 15-19: PWMCAPx: PRIMARY PWMx TIME BASE CAPTURE REGISTER
R-0
R-0
R-0
R-0
R-0
R-0
R-0
R-0
PWMCAP<15:8>(1,2)
bit 15
bit 8
R-0
R-0
R-0
R-0
R-0
PWMCAP<7:3>(1,2)
U-0
U-0
U-0
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-3
PWMCAP<15:3>: Captured PWM Time Base Value bits(1,2)
The value in this register represents the captured PWM time base value when a leading edge is
detected on the current-limit input.
bit 2-0
Unimplemented: Read as ‘0’
Note 1: The capture feature is only available on primary output (PWMxH).
2: This feature is active only after LEB processing on the current-limit input signal is complete.
DS70318D-page 216
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
16.0
SERIAL PERIPHERAL
INTERFACE (SPI)
Note:
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 18. “Serial
Peripheral Interface (SPI)” (DS70206),
which is available on the Microchip
web site (www.microchip.com).
The SPI module consists of a 16-bit shift register,
SPIxSR (where x = 1), used for shifting data in and out,
and a buffer register, SPIxBUF. A control register,
SPIxCON, configures the module. Additionally, a status
register, SPIxSTAT, indicates status conditions.
The serial interface consists of the following four pins:
•
•
•
•
SDIx (Serial Data Input)
SDOx (Serial Data Output)
SCKx (Shift Clock Input Or Output)
SSx (Active-Low Slave Select).
In Master mode operation, SCK is a clock output; in
Slave mode, it is a clock input.
The Serial Peripheral Interface (SPI) module is a
synchronous serial interface useful for communicating
with other peripheral or microcontroller devices. These
peripheral devices can be serial EEPROMs, shift
registers, display drivers, analog-to-digital converters
and so on. The SPI module is compatible with SPI and
SIOP from Motorola®.
FIGURE 16-1:
SPI MODULE BLOCK DIAGRAM
SCKx
SSx
1:1 to 1:8
Secondary
Prescaler
Sync
Control
1:1/4/16/64
Primary
Prescaler
Select
Edge
Control
Clock
SPIxCON1<1:0>
Shift Control
SPIxCON1<4:2>
SDOx
Enable
Master Clock
bit 0
SDIx
FCY
SPIxSR
Transfer
Transfer
SPIxRXB
SPIxTXB
SPIxBUF
Read SPIxBUF
Write SPIxBUF
16
Internal Data Bus
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 217
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 16-1:
SPIxSTAT: SPIx STATUS AND CONTROL REGISTER
R/W-0
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
SPIEN
—
SPISIDL
—
—
—
—
—
bit 15
bit 8
U-0
R/C-0
U-0
U-0
U-0
U-0
R-0
R-0
—
SPIROV
—
—
—
—
SPITBF
SPIRBF
bit 7
bit 0
Legend:
C = Clearable bit
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
SPIEN: SPIx Enable bit
1 = Enables module and configures SCKx, SDOx, SDIx and SSx as serial port pins
0 = Disables module
bit 14
Unimplemented: Read as ‘0’
bit 13
SPISIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12-7
Unimplemented: Read as ‘0’
bit 6
SPIROV: Receive Overflow Flag bit
1 = A new byte/word is completely received and discarded. The user software has not read the
previous data in the SPIxBUF register.
0 = No overflow has occurred
bit 5-2
Unimplemented: Read as ‘0’
bit 1
SPITBF: SPIx Transmit Buffer Full Status bit
1 = Transmit not yet started, SPIxTXB is full
0 = Transmit started, SPIxTXB is empty. Automatically set in hardware when CPU writes SPIxBUF
location, loading SPIxTXB. Automatically cleared in hardware when SPIx module transfers data
from SPIxTXB to SPIxSR.
bit 0
SPIRBF: SPIx Receive Buffer Full Status bit
1 = Receive complete, SPIxRXB is full
0 = Receive is not complete, SPIxRXB is empty. Automatically set in hardware when SPIx transfers
data from SPIxSR to SPIxRXB. Automatically cleared in hardware when core reads SPIxBUF
location, reading SPIxRXB.
DS70318D-page 218
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 16-2:
SPIXCON1: SPIx CONTROL REGISTER 1
U-0
U-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
—
—
—
DISSCK
DISSDO
MODE16
SMP
CKE(1)
bit 15
bit 8
R/W-0
R/W-0
R/W-0
SSEN(3)
CKP
MSTEN
R/W-0
R/W-0
R/W-0
R/W-0
SPRE<2:0>(2)
R/W-0
PPRE<1:0>(2)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-13
Unimplemented: Read as ‘0’
bit 12
DISSCK: Disable SCKx pin bit (SPI Master modes only)
1 = Internal SPI clock is disabled; pin functions as I/O
0 = Internal SPI clock is enabled
bit 11
DISSDO: Disable SDOx pin bit
1 = SDOx pin is not used by module; pin functions as I/O
0 = SDOx pin is controlled by the module
bit 10
MODE16: Word/Byte Communication Select bit
1 = Communication is word-wide (16 bits)
0 = Communication is byte-wide (8 bits)
bit 9
SMP: SPIx Data Input Sample Phase bit
Master mode:
1 = Input data sampled at end of data output time
0 = Input data sampled at middle of data output time
Slave mode:
SMP must be cleared when SPIx is used in Slave mode.
bit 8
CKE: SPIx Clock Edge Select bit(1)
1 = Serial output data changes on transition from active clock state to Idle clock state (see bit 6)
0 = Serial output data changes on transition from Idle clock state to active clock state (see bit 6)
bit 7
SSEN: Slave Select Enable bit (Slave mode)(3)
1 = SSx pin used for Slave mode
0 = SSx pin not used by module; pin controlled by port function
bit 6
CKP: Clock Polarity Select bit
1 = Idle state for clock is a high level; active state is a low level
0 = Idle state for clock is a low level; active state is a high level
bit 5
MSTEN: Master Mode Enable bit
1 = Master mode
0 = Slave mode
Note 1: The CKE bit is not used in the Framed SPI modes. Program this bit to ‘0’ for the Framed SPI modes
(FRMEN = 1).
2: Do not set both primary and secondary prescalers to a value of 1:1.
3: This bit must be cleared when FRMEN = 1.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 219
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 16-2:
SPIXCON1: SPIx CONTROL REGISTER 1 (CONTINUED)
bit 4-2
SPRE<2:0>: Secondary Prescale bits (Master mode)(2)
111 = Secondary prescale 1:1
110 = Secondary prescale 2:1
.
.
.
000 = Secondary prescale 8:1
bit 1-0
PPRE<1:0>: Primary Prescale bits (Master mode)(2)
11 = Primary prescale 1:1
10 = Primary prescale 4:1
01 = Primary prescale 16:1
00 = Primary prescale 64:1
Note 1: The CKE bit is not used in the Framed SPI modes. Program this bit to ‘0’ for the Framed SPI modes
(FRMEN = 1).
2: Do not set both primary and secondary prescalers to a value of 1:1.
3: This bit must be cleared when FRMEN = 1.
DS70318D-page 220
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 16-3:
SPIxCON2: SPIx CONTROL REGISTER 2
R/W-0
R/W-0
R/W-0
U-0
U-0
U-0
U-0
U-0
FRMEN
SPIFSD
FRMPOL
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
U-0
—
—
—
—
—
—
FRMDLY
—
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
FRMEN: Framed SPIx Support bit
1 = Framed SPIx support enabled (SSx pin used as frame sync pulse input/output)
0 = Framed SPIx support disabled
bit 14
SPIFSD: Frame Sync Pulse Direction Control bit
1 = Frame sync pulse input (slave)
0 = Frame sync pulse output (master)
bit 13
FRMPOL: Frame Sync Pulse Polarity bit
1 = Frame sync pulse is active-high
0 = Frame sync pulse is active-low
bit 12-2
Unimplemented: Read as ‘0’
bit 1
FRMDLY: Frame Sync Pulse Edge Select bit
1 = Frame sync pulse coincides with first bit clock
0 = Frame sync pulse precedes first bit clock
bit 0
Unimplemented: This bit must not be set to ‘1’ by the user application
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 221
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 222
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
17.0
Note:
INTER-INTEGRATED CIRCUIT
(I2C™)
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference
Manual”,
Section
19.
“Inter-Integrated
Circuit
(I2C™)”
(DS70195), which is available on the
Microchip web site (www.microchip.com).
The Inter-Integrated Circuit (I2C) module provides
complete hardware support for both Slave and
Multi-Master modes of the I2C serial communication
standard with a 16-bit interface.
The I2C module has a 2-pin interface:
• The SCLx pin is clock.
• The SDAx pin is data.
The I
2C
module offers the following key features:
2C
• I interface supporting both Master and Slave
modes of operation.
• I2C Slave mode supports 7-bit and
10-bit addressing.
• I2C Master mode supports 7-bit and
10-bit addressing.
• I2C port allows bidirectional transfers between
master and slaves.
• Serial clock synchronization for I2C port can be
used as a handshake mechanism to suspend and
resume serial transfer (SCLREL control).
• I2C supports multi-master operation, detects bus
collision and arbitrates accordingly.
17.1
17.2
I2C Registers
I2CxCON and I2CxSTAT are control and status
registers, respectively. The I2CxCON register is
readable and writable. The lower six bits of I2CxSTAT
are read-only. The remaining bits of the I2CSTAT are
read/write:
• I2CxRSR is the shift register used for shifting data
internal to the module and the user application
has no access to it.
• I2CxRCV is the receive buffer and the register to
which data bytes are written, or from which data
bytes are read.
• I2CxTRN is the transmit register to which bytes
are written during a transmit operation.
• The I2CxADD register holds the slave address.
• A status bit, ADD10, indicates 10-Bit Address
mode.
• The I2CxBRG acts as the Baud Rate Generator
(BRG) reload value.
In receive operations, I2CxRSR and I2CxRCV together
form a double-buffered receiver. When I2CxRSR
receives a complete byte, it is transferred to I2CxRCV,
and an interrupt pulse is generated.
Operating Modes
The hardware fully implements all the master and slave
functions of the I2C Standard and Fast mode
specifications, as well as 7-bit and 10-bit addressing.
The I2C module can operate either as a slave or a
master on an I2C bus.
The following types of I2C operation are supported:
•
•
•
I2C slave operation with 7-bit addressing
I2C slave operation with 10-bit addressing
I2C master operation with 7-bit or 10-bit addressing
For details about the communication sequence in each
of these modes, refer to the “dsPIC33F Family
Reference Manual”. Please see the Microchip web site
(www.microchip.com) for the latest “dsPIC33F Family
Reference Manual” chapters.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 223
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 17-1:
I2C™ BLOCK DIAGRAM (X = 1)
Internal
Data Bus
I2CxRCV
SCLx
Read
Shift
Clock
I2CxRSR
LSb
SDAx
Address Match
Match Detect
Write
I2CxMSK
Write
Read
I2CxADD
Read
Start and Stop
Bit Detect
Write
Start and Stop
Bit Generation
Control Logic
I2CxSTAT
Collision
Detect
Read
Write
I2CxCON
Acknowledge
Generation
Read
Clock
Stretching
Write
I2CxTRN
LSb
Read
Shift Clock
Reload
Control
Write
BRG Down Counter
I2CxBRG
Read
TCY/2
DS70318D-page 224
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 17-1:
I2CxCON: I2Cx CONTROL REGISTER
R/W-0
U-0
R/W-0
R/W-1, HC
R/W-0
R/W-0
R/W-0
R/W-0
I2CEN
—
I2CSIDL
SCLREL
IPMIEN
A10M
DISSLW
SMEN
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0, HC
R/W-0, HC
R/W-0, HC
R/W-0, HC
R/W-0, HC
GCEN
STREN
ACKDT
ACKEN
RCEN
PEN
RSEN
SEN
bit 7
bit 0
Legend:
U = Unimplemented bit, read as ‘0’
R = Readable bit
W = Writable bit
HS = Hardware Settable bit
HC = Hardware Clearable bit
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
I2CEN: I2Cx Enable bit
1 = Enables the I2Cx module and configures the SDAx and SCLx pins as serial port pins
0 = Disables the I2Cx module. All I2C pins are controlled by port functions.
bit 14
Unimplemented: Read as ‘0’
bit 13
I2CSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters an Idle mode
0 = Continue module operation in Idle mode
bit 12
SCLREL: SCLx Release Control bit (when operating as I2C slave)
1 = Release SCLx clock
0 = Hold SCLx clock low (clock stretch)
If STREN = 1:
Bit is R/W (i.e., software can write ‘0’ to initiate stretch and write ‘1’ to release clock). Hardware clear
at beginning of slave transmission. Hardware clear at end of slave reception.
If STREN = 0:
Bit is R/S (i.e., software can only write ‘1’ to release clock). Hardware clear at beginning of slave
transmission.
bit 11
IPMIEN: Intelligent Peripheral Management Interface (IPMI) Enable bit
1 = IPMI mode is enabled; all addresses acknowledged
0 = IPMI mode disabled
bit 10
A10M: 10-Bit Slave Address bit
1 = I2CxADD is a 10-bit slave address
0 = I2CxADD is a 7-bit slave address
bit 9
DISSLW: Disable Slew Rate Control bit
1 = Slew rate control disabled
0 = Slew rate control enabled
bit 8
SMEN: SMbus Input Levels bit
1 = Enable I/O pin thresholds compliant with SMbus specification
0 = Disable SMbus input thresholds
bit 7
GCEN: General Call Enable bit (when operating as I2C slave)
1 = Enable interrupt when a general call address is received in the I2CxRSR
(module is enabled for reception)
0 = General call address disabled
bit 6
STREN: SCLx Clock Stretch Enable bit (when operating as I2C slave)
Used in conjunction with SCLREL bit.
1 = Enable software or receive clock stretching
0 = Disable software or receive clock stretching
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 225
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 17-1:
I2CxCON: I2Cx CONTROL REGISTER (CONTINUED)
bit 5
ACKDT: Acknowledge Data bit (when operating as I2C master, applicable during master receive)
Value that is transmitted when the software initiates an Acknowledge sequence.
1 = Send NACK during Acknowledge
0 = Send ACK during Acknowledge
bit 4
ACKEN: Acknowledge Sequence Enable bit
(when operating as I2C master, applicable during master receive)
1 = Initiate Acknowledge sequence on SDAx and SCLx pins and transmit ACKDT data bit. Hardware
clear at end of master Acknowledge sequence.
0 = Acknowledge sequence not in progress
bit 3
RCEN: Receive Enable bit (when operating as I2C master)
1 = Enables Receive mode for I2C. Hardware clear at end of eighth bit of master receive data byte.
0 = Receive sequence not in progress
bit 2
PEN: Stop Condition Enable bit (when operating as I2C master)
1 = Initiate Stop condition on SDAx and SCLx pins. Hardware clear at end of master Stop sequence.
0 = Stop condition not in progress
bit 1
RSEN: Repeated Start Condition Enable bit (when operating as I2C master)
1 = Initiate Repeated Start condition on SDAx and SCLx pins. Hardware clear at end of master
Repeated Start sequence.
0 = Repeated Start condition not in progress
bit 0
SEN: Start Condition Enable bit (when operating as I2C master)
1 = Initiate Start condition on SDAx and SCLx pins. Hardware clear at end of master Start sequence.
0 = Start condition not in progress
DS70318D-page 226
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 17-2:
I2CxSTAT: I2Cx STATUS REGISTER
R-0, HSC
R-0, HSC
U-0
U-0
U-0
R/C-0, HSC
R-0, HSC
R-0, HSC
ACKSTAT
TRSTAT
—
—
—
BCL
GCSTAT
ADD10
bit 15
bit 8
R/C-0, HS
R/C-0, HS
R-0, HSC
IWCOL
I2COV
D_A
R/C-0, HSC R/C-0, HSC
P
R-0, HSC
R-0, HSC
R-0, HSC
R_W
RBF
TBF
S
bit 7
bit 0
Legend:
U = Unimplemented bit, read as ‘0’
R = Readable bit
W = Writable bit
HS = Hardware Settable bit
HSC = Hardware Settable/Clearable
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
ACKSTAT: Acknowledge Status bit
(when operating as I2C master, applicable to master transmit operation)
1 = NACK received from slave
0 = ACK received from slave
Hardware set or clear at end of slave Acknowledge.
bit 14
TRSTAT: Transmit Status bit (when operating as I2C master, applicable to master transmit operation)
1 = Master transmit is in progress (8 bits + ACK)
0 = Master transmit is not in progress
Hardware set at beginning of master transmission. Hardware clear at end of slave Acknowledge.
bit 13-11
Unimplemented: Read as ‘0’
bit 10
BCL: Master Bus Collision Detect bit
1 = A bus collision has been detected during a master operation
0 = No collision
Hardware set at detection of bus collision.
bit 9
GCSTAT: General Call Status bit
1 = General call address was received
0 = General call address was not received
Hardware set when address matches general call address. Hardware clear at Stop detection.
bit 8
ADD10: 10-Bit Address Status bit
1 = 10-bit address was matched
0 = 10-bit address was not matched
Hardware set at match of 2nd byte of matched 10-bit address. Hardware clear at Stop detection.
bit 7
IWCOL: Write Collision Detect bit
1 = An attempt to write the I2CxTRN register failed because the I2C module is busy
0 = No collision
Hardware set at occurrence of write to I2CxTRN while busy (cleared by software).
bit 6
I2COV: Receive Overflow Flag bit
1 = A byte was received while the I2CxRCV register is still holding the previous byte
0 = No overflow
Hardware set at attempt to transfer I2CxRSR to I2CxRCV (cleared by software).
bit 5
D_A: Data/Address bit (when operating as I2C slave)
1 = Indicates that the last byte received was data
0 = Indicates that the last byte received was device address
Hardware clear at device address match. Hardware set by reception of slave byte.
bit 4
P: Stop bit
1 = Indicates that a Stop bit has been detected last
0 = Stop bit was not detected last
Hardware set or clear when Start, Repeated Start or Stop detected.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 227
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 17-2:
I2CxSTAT: I2Cx STATUS REGISTER (CONTINUED)
bit 3
S: Start bit
1 = Indicates that a Start (or Repeated Start) bit has been detected last
0 = Start bit was not detected last
Hardware set or clear when Start, Repeated Start or Stop detected.
bit 2
R_W: Read/Write Information bit (when operating as I2C slave)
1 = Read – indicates data transfer is output from slave
0 = Write – indicates data transfer is input to slave
Hardware set or clear after reception of I 2C device address byte.
bit 1
RBF: Receive Buffer Full Status bit
1 = Receive complete, I2CxRCV is full
0 = Receive not complete, I2CxRCV is empty
Hardware set when I2CxRCV is written with received byte. Hardware clear when software reads
I2CxRCV.
bit 0
TBF: Transmit Buffer Full Status bit
1 = Transmit in progress, I2CxTRN is full
0 = Transmit complete, I2CxTRN is empty
Hardware set when software writes I2CxTRN. Hardware clear at completion of data transmission.
DS70318D-page 228
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 17-3:
I2CxMSK: I2Cx SLAVE MODE ADDRESS MASK REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
R/W-0
R/W-0
AMSK<9:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
AMSK<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-10
Unimplemented: Read as ‘0’
bit 9-0
AMSK<9:0>: Mask for Address bit x Select bits
1 = Enable masking for bit x of incoming message address; bit match not required in this position
0 = Disable masking for bit x; bit match required in this position
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 229
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 230
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
18.0
Note:
UNIVERSAL ASYNCHRONOUS
RECEIVER TRANSMITTER
(UART)
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04
family
of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference Manual”, Section 17. “UART”
(DS70188), which is available on the
Microchip web site (www.microchip.com).
The Universal Asynchronous Receiver Transmitter
(UART) module is one of the serial I/O modules
available in the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 device families. The UART
is a full-duplex, asynchronous system that can
communicate with peripheral devices, such as
personal computers, LIN, RS-232 and RS-485
interfaces. The module also supports a hardware flow
control option with the UxCTS and UxRTS pins and
also includes an IrDA® encoder and decoder.
The primary features of the UART module are:
• Full-Duplex, 8-Bit or 9-Bit Data Transmission
through the UxTX and UxRX pins
• Even, Odd or No Parity Options (for 8-bit data)
• One or Two Stop bits
FIGURE 18-1:
• Hardware Flow Control Option with UxCTS and
UxRTS Pins
• Fully Integrated Baud Rate Generator with 16-Bit
Prescaler
• Baud Rates Ranging from 1 Mbps to 15 bps at
16x mode at 40 MIPS
• Baud Rates Ranging from 4 Mbps to 61 bps at
4x mode at 40 MIPS
• 4-Deep First-In First-Out (FIFO) Transmit Data
Buffer
• 4-Deep FIFO Receive Data Buffer
• Parity, Framing and Buffer Overrun Error Detection
• Support for 9-bit mode with Address Detect
(9th bit = 1)
• Transmit and Receive Interrupts
• A Separate Interrupt for all UART Error Conditions
• Loopback mode for Diagnostic Support
• Support for Sync and Break Characters
• Support for Automatic Baud Rate Detection
• IrDA Encoder and Decoder Logic
• 16x Baud Clock Output for IrDA® Support
A simplified block diagram of the UART module is
shown in Figure 18-1. The UART module consists of
these key hardware elements:
• Baud Rate Generator
• Asynchronous Transmitter
• Asynchronous Receiver
UART SIMPLIFIED BLOCK DIAGRAM
Baud Rate Generator
IrDA®
Hardware Flow Control
UxRTS
UxCTS
© 2009 Microchip Technology Inc.
UART Receiver
UxRX
UART Transmitter
UxTX
Preliminary
DS70318D-page 231
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 18-1:
UxMODE: UARTx MODE REGISTER
R/W-0
U-0
R/W-0
R/W-0
R/W-0
U-0
UARTEN(1)
—
USIDL
IREN(2)
RTSMD
—
R/W-0
R/W-0
UEN<1:0>
bit 15
bit 8
R/W-0 HC
R/W-0
R/W-0, HC
R/W-0
R/W-0
WAKE
LPBACK
ABAUD
URXINV
BRGH
R/W-0
R/W-0
PDSEL<1:0>
R/W-0
STSEL
bit 7
bit 0
Legend:
HC = Hardware Clearable
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
UARTEN: UARTx Enable bit(1)
1 = UARTx is enabled; all UARTx pins are controlled by UARTx as defined by UEN<1:0>
0 = UARTx is disabled; all UARTx pins are controlled by port latches; UARTx power consumption minimal
bit 14
Unimplemented: Read as ‘0’
bit 13
USIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12
IREN: IrDA® Encoder and Decoder Enable bit(2)
1 = IrDA® encoder and decoder enabled
0 = IrDA® encoder and decoder disabled
bit 11
RTSMD: Mode Selection for UxRTS Pin bit
1 = UxRTS pin in Simplex mode
0 = UxRTS pin in Flow Control mode
bit 10
Unimplemented: Read as ‘0’
bit 9-8
UEN<1:0>: UARTx Enable bits
11 = UxTX, UxRX and BCLK pins are enabled and used; UxCTS pin controlled by port latches
10 = UxTX, UxRX, UxCTS and UxRTS pins are enabled and used
01 = UxTX, UxRX and UxRTS pins are enabled and used; UxCTS pin controlled by port latches
00 = UxTX and UxRX pins are enabled and used; UxCTS and UxRTS/BCLK pins controlled by
port latches
bit 7
WAKE: Wake-up on Start bit Detect During Sleep Mode Enable bit
1 = UARTx will continue to sample the UxRX pin; interrupt generated on falling edge; bit cleared
in hardware on following rising edge
0 = No wake-up enabled
bit 6
LPBACK: UARTx Loopback Mode Select bit
1 = Enable Loopback mode
0 = Loopback mode is disabled
bit 5
ABAUD: Auto-Baud Enable bit
1 = Enable baud rate measurement on the next character – requires reception of a Sync field (55h)
before other data; cleared in hardware upon completion
0 = Baud rate measurement disabled or completed
bit 4
URXINV: Receive Polarity Inversion bit
1 = UxRX Idle state is ‘0’
0 = UxRX Idle state is ‘1’
Note 1: Refer to Section 17. “UART” (DS70188) in the “dsPIC33F Family Reference Manual” for information on
enabling the UART module for receive or transmit operation.
2: This feature is only available for the 16x BRG mode (BRGH = 0).
DS70318D-page 232
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 18-1:
UxMODE: UARTx MODE REGISTER (CONTINUED)
bit 3
BRGH: High Baud Rate Enable bit
1 = BRG generates 4 clocks per bit period (4x baud clock, High-Speed mode)
0 = BRG generates 16 clocks per bit period (16x baud clock, Standard mode)
bit 2-1
PDSEL<1:0>: Parity and Data Selection bits
11 = 9-bit data, no parity
10 = 8-bit data, odd parity
01 = 8-bit data, even parity
00 = 8-bit data, no parity
bit 0
STSEL: Stop Bit Selection bit
1 = Two Stop bits
0 = One Stop bit
Note 1: Refer to Section 17. “UART” (DS70188) in the “dsPIC33F Family Reference Manual” for information on
enabling the UART module for receive or transmit operation.
2: This feature is only available for the 16x BRG mode (BRGH = 0).
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 233
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 18-2:
R/W-0
UxSTA: UARTx STATUS AND CONTROL REGISTER
R/W-0
UTXISEL1
UTXINV
R/W-0
UTXISEL0
U-0
—
R/W-0, HC
UTXBRK
R/W-0
(1)
UTXEN
R-0
R-1
UTXBF
TRMT
bit 15
bit 8
R/W-0
R/W-0
URXISEL<1:0>
R/W-0
R-1
R-0
R-0
R/C-0
R-0
ADDEN
RIDLE
PERR
FERR
OERR
URXDA
bit 7
bit 0
Legend:
HC = Hardware Clearable bit
C = Clearable bit
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15,13
UTXISEL<1:0>: Transmission Interrupt Mode Selection bits
11 = Reserved; do not use
10 = Interrupt when a character is transferred to the Transmit Shift register, and as a result, the
transmit buffer becomes empty
01 = Interrupt when the last character is shifted out of the Transmit Shift register; all transmit
operations are completed
00 = Interrupt when a character is transferred to the Transmit Shift register (this implies there is at
least one character open in the transmit buffer)
bit 14
UTXINV: Transmit Polarity Inversion bit
If IREN = 0:
1 = UxTX Idle state is ‘0’
0 = UxTX Idle state is ‘1’
If IREN = 1:
1 = IrDA® encoded UxTX Idle state is ‘1’
0 = IrDA® encoded UxTX Idle state is ‘0’
bit 12
Unimplemented: Read as ‘0’
bit 11
UTXBRK: Transmit Break bit
1 = Send Sync Break on next transmission – Start bit, followed by twelve ‘0’ bits, followed by Stop bit;
cleared by hardware upon completion
0 = Sync Break transmission disabled or completed
bit 10
UTXEN: Transmit Enable bit(1)
1 = Transmit enabled, UxTX pin controlled by UARTx
0 = Transmit disabled, any pending transmission is aborted and buffer is reset; UxTX pin controlled
by port
bit 9
UTXBF: Transmit Buffer Full Status bit (read-only)
1 = Transmit buffer is full
0 = Transmit buffer is not full; at least one more character can be written
bit 8
TRMT: Transmit Shift Register Empty bit (read-only)
1 = Transmit Shift register is empty and transmit buffer is empty (the last transmission has completed)
0 = Transmit Shift register is not empty, a transmission is in progress or queued
bit 7-6
URXISEL<1:0>: Receive Interrupt Mode Selection bits
11 = Interrupt is set on UxRSR transfer making the receive buffer full (i.e., has 4 data characters)
10 = Interrupt is set on UxRSR transfer making the receive buffer 3/4 full (i.e., has 3 data characters)
0x = Interrupt is set when any character is received and transferred from the UxRSR to the receive
buffer; receive buffer has one or more characters
Note 1: Refer to Section 17. “UART” (DS70188) in the “dsPIC33F Family Reference Manual” for information on
enabling the UART module for transmit operation.
DS70318D-page 234
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 18-2:
UxSTA: UARTx STATUS AND CONTROL REGISTER (CONTINUED)
bit 5
ADDEN: Address Character Detect bit (bit 8 of received data = 1)
1 = Address Detect mode enabled. If 9-bit mode is not selected, this does not take effect.
0 = Address Detect mode disabled
bit 4
RIDLE: Receiver Idle bit (read-only)
1 = Receiver is Idle
0 = Receiver is active
bit 3
PERR: Parity Error Status bit (read-only)
1 = Parity error has been detected for the current character (character at the top of the receive FIFO)
0 = Parity error has not been detected
bit 2
FERR: Framing Error Status bit (read-only)
1 = Framing error has been detected for the current character (character at the top of the receive
FIFO)
0 = Framing error has not been detected
bit 1
OERR: Receive Buffer Overrun Error Status bit (clear/read-only)
1 = Receive buffer has overflowed
0 = Receive buffer has not overflowed. Clearing a previously set OERR bit (1 → 0 transition) will reset
the receiver buffer and the UxRSR to the empty state.
bit 0
URXDA: Receive Buffer Data Available bit (read-only)
1 = Receive buffer has data, at least one more character can be read
0 = Receive buffer is empty
Note 1: Refer to Section 17. “UART” (DS70188) in the “dsPIC33F Family Reference Manual” for information on
enabling the UART module for transmit operation.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 235
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 236
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
19.0
Note:
HIGH-SPEED 10-BIT
ANALOG-TO-DIGITAL
CONVERTER (ADC)
19.2
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference
Manual”,
Section
44.
“High-Speed 10-Bit Analog-to-Digital
Converter (ADC)” (DS70321), which is
available on the Microchip web site
(www.microchip.com).
Module Description
This ADC module is designed for applications that
require low latency between the request for conversion
and the resultant output data. Typical applications
include:
• AC/DC power supplies
• DC/DC converters
• Power Factor Correction (PFC)
This ADC works with the high-speed PWM module in
power control applications that require high-frequency
control loops. This module can sample and convert two
analog inputs in a 0.5 microsecond when two SARs are
used. This small conversion delay reduces the “phase
lag” between measurement and control system
response.
The
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices provide high-speed
successive approximation analog to digital conversions to
support applications such as AC/DC and DC/DC power
converters.
Up to five inputs may be sampled at a time (four inputs
from the dedicated sample and hold circuits and one
from the shared sample and hold circuit). If multiple
inputs request conversion, the ADC will convert them in
a sequential manner, starting with the lowest order
input.
19.1
This ADC design provides each pair of analog inputs
(AN1,AN0), (AN3,AN2),..., the ability to specify its own
trigger source out of a maximum of sixteen different
trigger sources. This capability allows this ADC to
sample and convert analog inputs that are associated
with PWM generators operating on independent time
bases.
Features Overview
The ADC module comprises the following features:
• 10-bit resolution
• Unipolar inputs
• Up to two Successive Approximation Registers
(SARs)
• Up to 12 external input channels
• Up to two internal analog inputs
• Dedicated result register for each analog input
• ±1 LSB accuracy at 3.3V
• Single supply operation
• 4 Msps conversion rate at 3.3V (devices with two
SARs)
• 2 Msps conversion rate at 3.3V (devices with one
SAR)
• Low-power CMOS technology
© 2009 Microchip Technology Inc.
The user application typically requires synchronization
between analog data sampling and PWM output to the
application circuit. The very high-speed operation of
this ADC module allows “data on demand”.
In addition, several hardware features have been
added to the peripheral interface to improve real-time
performance in a typical DSP based application.
•
•
•
•
Result alignment options
Automated sampling
External conversion start control
Two internal inputs to monitor 1.2V internal
reference and EXTREF input signal
A block diagram of the ADC module is shown in
Figure 19-6.
Preliminary
DS70318D-page 237
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
19.3
Module Functionality
The high-speed 10-bit ADC module is designed to
support power conversion applications when used with
the High-Speed PWM module. The ADC may have one
or two SAR modules, depending on the device variant.
If two SARs are present on a device, two conversions
can be processed at a time, yielding 4 Msps conversion
rate. If only one SAR is present on a device, only one
conversion can be processed at a time, yielding 2 Msps
conversion rate. The high-speed 10-bit ADC produces
two 10-bit conversion results in a 0.5 microsecond.
The ADC module supports up to 12 external analog
inputs and two internal analog inputs. To monitor
reference voltage, two internal inputs, AN12 and AN13,
are connected to the EXTREF and internal band gap
voltages (1.2V), respectively.
The analog reference voltage is defined as the device
supply voltage (AVDD/AVSS).
The ADC module uses the following control and status
registers:
•
•
•
•
•
•
•
•
ADCON: A/D Control Register
ADSTAT: A/D Status Register
ADBASE: A/D Base Register(1,2)
ADPCFG: A/D Port Configuration Register
ADCPC0: A/D Convert Pair Control Register 0
ADCPC1: A/D Convert Pair Control Register 1
ADCPC2: A/D Convert Pair Control Register 2(1)
ADCPC3: A/D Convert Pair Control Register 3(1)
The ADCON register controls the operation of the
ADC module. The ADSTAT register displays the
status of the conversion processes. The ADPCFG
registers configure the port pins as analog inputs or
as digital I/O. The ADCPCx registers control the
triggering of the ADC conversions. See Register 19-1
through Register 19-8 for detailed bit configurations.
Note:
DS70318D-page 238
Preliminary
A unique feature of the ADC module is its
ability to sample inputs in an
asynchronous manner. Individual sample
and hold circuits can be triggered
independently of each other.
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 19-1:
ADC BLOCK DIAGRAM FOR dsPIC33FJ06GS101 DEVICES WITH ONE SAR
Even Numbered Inputs with Dedicated
Sample and Hold (S&H) Circuits
AN0
Eight
16-Bit
Registers
Bus Interface
SAR
Core
Data
Format
AN2
AN1
AN3
Shared Sample and Hold
AN6
AN7
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 239
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 19-2:
ADC BLOCK DIAGRAM FOR dsPIC33FJ06GS102 DEVICES WITH ONE SAR
Even Numbered Inputs with Dedicated
Sample and Hold (S&H) Circuits
AN0
Eight
16-Bit
Registers
Bus Interface
SAR
Core
Data
Format
AN2
AN1
AN3
Shared Sample and Hold
AN4
AN5
DS70318D-page 240
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 19-3:
ADC BLOCK DIAGRAM FOR dsPIC33FJ06GS202 DEVICES WITH ONE SAR
Even Numbered Inputs with Dedicated
Sample and Hold (S&H) Circuits
AN0
AN12(1)
(EXTREF)
Eight
16-Bit
Registers
Bus Interface
SAR
Core
Data
Format
AN2
AN1
Shared Sample and Hold
AN3
AN4
AN5
AN13(2)
(INTREF)
Note
1:
AN12 (EXTREF) is an internal analog input. To measure the voltage at AN12 (EXTREF), an analog comparator must be enabled
and EXTREF must be selected as the comparator reference.
2:
AN13 (INTREF) is an internal analog input and is not available on a pin.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 241
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 19-4:
ADC BLOCK DIAGRAM FOR dsPIC33FJ16GS402/404 DEVICES WITH ONE SAR
Even Numbered Inputs with Dedicated
Sample and Hold (S&H) Circuits
AN0
AN2
Ten
16-Bit
Registers
Bus Interface
SAR
Core
Data
Format
AN4
AN1
AN3
Shared Sample and Hold
AN5
AN6
AN7
DS70318D-page 242
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 19-5:
ADC BLOCK DIAGRAM FOR dsPIC33FJ16GS502 DEVICES WITH TWO SARS
Even Numbered Inputs with Dedicated
Sample and Hold (S&H) Circuits
AN0
Data
Format
SAR
Core
Five
16-Bit
Registers
Data
Format
AN2
Five
16-Bit
Registers
AN4
AN6
Bus Interface
Even numbered inputs
with shared S&H
AN12(1)
(EXTREF)
AN1
Odd Numbered Inputs
with Shared S&H
AN3
AN5
SAR
AN7
Core
AN13(2)
(INTREF)
Note
1:
AN12 (EXTREF) is an internal analog input. To measure the voltage at AN12 (EXTREF), an analog comparator must be enabled
and EXTREF must be selected as the comparator reference.
2:
AN13 (INTREF) is an internal analog input and is not available on a pin.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 243
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 19-6:
ADC BLOCK DIAGRAM FOR dsPIC33FJ16GS504 DEVICES WITH TWO SARS
Even Numbered Inputs with Dedicated
Sample and Hold (S&H) Circuits
AN0
Data
Format
SAR
Core
Seven
16-Bit
Registers
Data
Format
AN2
Seven
16-Bit
Registers
AN4
AN6
AN8
Bus Interface
Even Numbered Inputs
with Shared S&H
AN10
AN12(1)
(EXTREF)
AN1
Odd Numbered Inputs
with Shared S&H
SAR
AN3
Core
AN5
AN7
AN9
AN11
AN13(2)
(INTREF)
Note
1:
AN12 (EXTREF) is an internal analog input. To measure the voltage at AN12 (EXTREF), an analog comparator must be enabled
and EXTREF must be selected as the comparator reference.
2:
AN13 (INTREF) is an internal analog input and is not available on a pin.
DS70318D-page 244
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-1:
ADCON: A/D CONTROL REGISTER
R/W-0
U-0
R/W-0
R/W-0
U-0
R/W-0
U-0
R/W-0
ADON
—
ADSIDL
SLOWCLK(1)
—
GSWTRG
—
FORM(1)
bit 15
bit 8
R/W-0
R/W-0
EIE(1)
ORDER(1)
R/W-0
R/W-0
U-0
SEQSAMP(1) ASYNCSAMP(1)
R/W-0
—
R/W-1
R/W-1
ADCS<2:0>(1)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
ADON: A/D Operating Mode bit
1 = A/D converter module is operating
0 = A/D converter is off
bit 14
Unimplemented: Read as ‘0’
bit 13
ADSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12
SLOWCLK: Enable The Slow Clock Divider bit(1)
1 = ADC is clocked by the auxiliary PLL (ACLK)
0 = ADC is clock by the primary PLL (FVCO)
bit 11
Unimplemented: Read as ‘0’
bit 10
GSWTRG: Global Software Trigger bit
When this bit is set by the user, it will trigger conversions if selected by the TRGSRC<4:0> bits in the
ADCPCx registers. This bit must be cleared by the user prior to initiating another global trigger (i.e., this
bit is not auto-clearing).
bit 9
Unimplemented: Read as ‘0’
bit 8
FORM: Data Output Format bit(1)
1 = Fractional (DOUT = dddd dddd dd00 0000)
0 = Integer (DOUT = 0000 00dd dddd dddd)
bit 7
EIE: Early Interrupt Enable bit(1)
1 = Interrupt is generated after first conversion is completed
0 = Interrupt is generated after second conversion is completed
bit 6
ORDER: Conversion Order bit(1)
1 = Odd numbered analog input is converted first, followed by conversion of even numbered input
0 = Even numbered analog input is converted first, followed by conversion of odd numbered input
bit 5
SEQSAMP: Sequential Sample Enable bit(1)
1 = Shared Sample and Hold (S&H) circuit is sampled at the start of the second conversion if
ORDER = 0. If ORDER = 1, then the shared S&H is sampled at the start of the first conversion.
0 = Shared S&H is sampled at the same time the dedicated S&H is sampled if the shared S&H is not
currently busy with an existing conversion process. If the shared S&H is busy at the time the
dedicated S&H is sampled, then the shared S&H will sample at the start of the new conversion
cycle.
Note 1: This control bit can only be changed while ADC is disabled (ADON = 0), and only applies to single SAR
devices.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 245
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-1:
ADCON: A/D CONTROL REGISTER (CONTINUED)
bit 4
ASYNCSAMP: Asynchronous Dedicated S&H Sampling Enable bit(1)
1 = The dedicated S&H is constantly sampling and then terminates sampling as soon as the trigger
pulse is detected.
0 = The dedicated S&H starts sampling when the trigger event is detected and completes the sampling
process in two ADC clock cycles.
bit 3
Unimplemented: Read as ‘0’
bit 2-0
ADCS<2:0>: A/D Conversion Clock Divider Select bits(1)
111 = FADC/8
110 = FADC/7
101 = FADC/6
100 = FADC/5
011 = FADC/4 (default)
010 = FADC/3
001 = FADC/2
000 = FADC/1
Note 1: This control bit can only be changed while ADC is disabled (ADON = 0), and only applies to single SAR
devices.
DS70318D-page 246
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-2:
ADSTAT: A/D STATUS REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
R/C-0, HS
R/C-0, HS
R/C-0, HS
R/C-0, HS
R/C-0, HS
R/C-0, HS
R/C-0, HS
—
P6RDY(1)
P5RDY(2)
P4RDY(2)
P3RDY(3)
P2RDY(4)
P1RDY
P0RDY
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
C = Clearable bit
‘1’ = Bit is set
HS = Hardware Settable bit
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-7
Unimplemented: Read as ‘0’
bit 6
P6RDY: Conversion Data for Pair 6 Ready bit(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 5
P5RDY: Conversion Data for Pair 5 Ready bit(2)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 4
P4RDY: Conversion Data for Pair 4 Ready bit(2)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 3
P3RDY: Conversion Data for Pair 3 Ready bit(3)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 2
P2RDY: Conversion Data for Pair 2 Ready bit(4)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 1
P1RDY: Conversion Data for Pair 1 Ready bit
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 0
P0RDY: Conversion Data for Pair 0 Ready bit
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
Note 1: This bit is available in the dsPIC33FJ16GS502, dsPIC33FJ16GS504 and dsPIC33FJ06GS202 devices
only.
2: This bit is available in the dsPIC33FJ16GS504 devices only.
3: This bit is available in the dsPIC33FJ16GS402/404, dsPIC33FJ16GS502, dsPIC33FJ16GS504 and
dsPIC33FJ06GS101 devices only.
4: This bit is available in the dsPIC33FJ16GS504 and dsPIC33FJ16GS502 devices only.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 247
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-3:
R/W-0
ADBASE: A/D BASE REGISTER(1,2)
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
ADBASE<15:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
U-0
—
ADBASE<7:1>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-1
ADBASE<15:1>: This register contains the base address of the user’s ADC Interrupt Service Routine
jump table. This register, when read, contains the sum of the ADBASE register contents and the
encoded value of the PxRDY status bits.
The encoder logic provides the bit number of the highest priority PxRDY bits where P0RDY is the
highest priority, and P6RDY is the lowest priority.
bit 0
Unimplemented: Read as ‘0’
Note 1: The encoding results are shifted left two bits so bits 1-0 of the result are always zero.
2: As an alternative to using the ADBASE Register, the ADCP0-6 ADC Pair Conversion Complete Interrupts
can be used to invoke A to D conversion completion routines for individual ADC input pairs.
REGISTER 19-4:
ADPCFG: A/D PORT CONFIGURATION REGISTER
U-0
U-0
U-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
—
—
—
—
PCFG11
PCFG10
PCFG9
PCFG8
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
PCFG7
PCFG6
PCFG5
PCFG4
PCFG3
PCFG2
PCFG1
PCFG0
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-12
Unimplemented: Read as ‘0’
bit 11-0
PCFG<11:0>: A/D Port Configuration Control bits(1,2,3,4)
1 = Port pin in Digital mode, port read input enabled, A/D input multiplexor connected to AVSS
0 = Port pin in Analog mode, port read input disabled, A/D samples pin voltage
Note:
Not all PCFGx bits are available on all devices. See Figure 19-1 through Figure 19-6 for the available
analog pins (PCFGx = ANx, where x = 0-11).
DS70318D-page 248
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-5:
ADCPC0: A/D CONVERT PAIR CONTROL REGISTER 0
R/W-0
R/W-0
R/W-0
IRQEN1
PEND1
SWTRG1
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC1<4:0>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
IRQEN0
PEND0
SWTRG0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC0<4:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
IRQEN1: Interrupt Request Enable 1 bit
1 = Enable IRQ generation when requested conversion of channels AN3 and AN2 is completed
0 = IRQ is not generated
bit 14
PEND1: Pending Conversion Status 1 bit
1 = Conversion of channels AN3 and AN2 is pending. Set when selected trigger is asserted
0 = Conversion is complete
bit 13
SWTRG1: Software Trigger 1 bit
1 = Start conversion of AN3 and AN2 (if selected in TRGSRC bits)(1)
This bit is automatically cleared by hardware when the PEND1 bit is set.
0 = Conversion is not started
bit 12-8
TRGSRC1<4:0>: Trigger 1 Source Selection bits
Selects trigger source for conversion of analog channels AN3 and AN2.
00000 = No conversion enabled
00001 = Individual software trigger selected
00010 = Global software trigger selected
00011 = PWM Special Event Trigger selected
00100 = PWM Generator 1 primary trigger selected
00101 = PWM Generator 2 primary trigger selected
00110 = PWM Generator 3 primary trigger selected
00111 = PWM Generator 4 primary trigger selected
01000 = Reserved
•
•
•
01100 = Timer1 period match
01101 = Reserved
01110 = PWM Generator 1 secondary trigger selected
01111 = PWM Generator 2 secondary trigger selected
10000 = PWM Generator 3 secondary trigger selected
10001 = PWM Generator 4 secondary trigger selected
10010 = Reserved
•
•
•
10110 = Reserved
10111 = PWM Generator 1 current-limit ADC trigger
11000 = PWM Generator 2 current-limit ADC trigger
11001 = PWM Generator 3 current-limit ADC trigger
11010 = PWM Generator 4 current-limit ADC trigger
11011 = Reserved
•
•
•
11111 = Timer2 period match
Note 1: If other conversions are in progress, then conversion will be performed when the conversion resources are
available.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 249
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-5:
ADCPC0: A/D CONVERT PAIR CONTROL REGISTER 0 (CONTINUED)
bit 7
IRQEN0: Interrupt Request Enable 0 bit
1 = Enable IRQ generation when requested conversion of channels AN1 and AN0 is completed
0 = IRQ is not generated
bit 6
PEND0: Pending Conversion Status 0 bit
1 = Conversion of channels AN1 and AN0 is pending; set when selected trigger is asserted
0 = Conversion is complete
bit 5
SWTRG0: Software Trigger 0 bit
1 = Start conversion of AN1 and AN0 (if selected by TRGSRC bits)(1)
This bit is automatically cleared by hardware when the PEND0 bit is set.
0 = Conversion is not started
bit 4-0
TRGSRC0<4:0>: Trigger 0 Source Selection bits
Selects trigger source for conversion of analog channels AN1 and AN0.
00000 = No conversion enabled
00001 = Individual software trigger selected
00010 = Global software trigger selected
00011 = PWM Special Event Trigger selected
00100 = PWM Generator 1 primary trigger selected
00101 = PWM Generator 2 primary trigger selected
00110 = PWM Generator 3 primary trigger selected
00111 = PWM Generator 4 primary trigger selected
01000 = Reserved
•
•
•
01100 = Timer1 period match
01101 = Reserved
01110 = PWM Generator 1 secondary trigger selected
01111 = PWM Generator 2 secondary trigger selected
10000 = PWM Generator 3 secondary trigger selected
10001 = PWM Generator 4 secondary trigger selected
10010 = Reserved
•
•
•
10110 = Reserved
10111 = PWM Generator 1 current-limit ADC trigger
11000 = PWM Generator 2 current-limit ADC trigger
11001 = PWM Generator 3 current-limit ADC trigger
11010 = PWM Generator 4 current-limit ADC trigger
11011 = Reserved
•
•
•
11111 = Timer2 period match
Note 1: If other conversions are in progress, then conversion will be performed when the conversion resources are
available.
DS70318D-page 250
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-6:
R/W-0
IRQEN3
(1)
ADCPC1: A/D CONVERT PAIR CONTROL REGISTER 1
R/W-0
R/W-0
PEND3(1)
SWTRG3(1)
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC3<4:0>(1)
bit 15
bit 8
R/W-0
R/W-0
R/W-0
IRQEN2(2)
PEND2(2)
SWTRG2(2)
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC2<4:0>(2)
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
IRQEN3: Interrupt Request Enable 3 bit(1)
1 = Enable IRQ generation when requested conversion of channels AN7 and AN6 is completed
0 = IRQ is not generated
bit 14
PEND3: Pending Conversion Status 3 bit(1)
1 = Conversion of channels AN7 and AN6 is pending. Set when selected trigger is asserted
0 = Conversion is complete
bit 13
SWTRG3: Software Trigger 3 bit(1)
1 = Start conversion of AN7 and AN6 (if selected in TRGSRC bits)(3)
This bit is automatically cleared by hardware when the PEND3 bit is set.
0 = Conversion is not started
Note 1: These bits are available in the dsPIC33FJ16GS402/404, dsPIC33FJ16GS504, dsPIC33FJ16GS502 and
dsPIC33FJ06GS101 devices only.
2: These bits are available in the dsPIC33FJ16GS502, dsPIC33FJ16GS504, dsPIC33FJ06GS102,
dsPIC33FJ06GS202 and dsPIC33FJ16GS402/404 devices only.
3: If other conversions are in progress, then conversion will be performed when the conversion resources are
available.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 251
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-6:
bit 12-8
ADCPC1: A/D CONVERT PAIR CONTROL REGISTER 1 (CONTINUED)
TRGSRC3<4:0>: Trigger 3 Source Selection bits(1)
Selects trigger source for conversion of analog channels AN7 and AN6.
00000 = No conversion enabled
00001 = Individual software trigger selected
00010 = Global software trigger selected
00011 = PWM Special Event Trigger selected
00100 = PWM Generator 1 primary trigger selected
00101 = PWM Generator 2 primary trigger selected
00110 = PWM Generator 3 primary trigger selected
00111 = PWM Generator 4 primary trigger selected
01000 = Reserved
•
•
•
01100 = Timer1 period match
01101 = Reserved
01110 = PWM Generator 1 secondary trigger selected
01111 = PWM Generator 2 secondary trigger selected
10000 = PWM Generator 3 secondary trigger selected
10001 = PWM Generator 4 secondary trigger selected
10010 = Reserved
•
•
•
10110 = Reserved
10111 = PWM Generator 1 current-limit ADC trigger
11000 = PWM Generator 2 current-limit ADC trigger
11001 = PWM Generator 3 current-limit ADC trigger
11010 = PWM Generator 4 current-limit ADC trigger
11011 = Reserved
•
•
•
11111 = Timer2 period match
bit 7
IRQEN2: Interrupt Request Enable 2 bit(2)
1 = Enable IRQ generation when requested conversion of channels AN5 and AN4 is completed
0 = IRQ is not generated
bit 6
PEND2: Pending Conversion Status 2 bit(2)
1 = Conversion of channels AN5 and AN4 is pending; set when selected trigger is asserted.
0 = Conversion is complete
bit 5
SWTRG2: Software Trigger 2 bit(2)
1 = Start conversion of AN5 and AN4 (if selected by TRGSRC bits)(3)
This bit is automatically cleared by hardware when the PEND2 bit is set.
0 = Conversion is not started
Note 1: These bits are available in the dsPIC33FJ16GS402/404, dsPIC33FJ16GS504, dsPIC33FJ16GS502 and
dsPIC33FJ06GS101 devices only.
2: These bits are available in the dsPIC33FJ16GS502, dsPIC33FJ16GS504, dsPIC33FJ06GS102,
dsPIC33FJ06GS202 and dsPIC33FJ16GS402/404 devices only.
3: If other conversions are in progress, then conversion will be performed when the conversion resources are
available.
DS70318D-page 252
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-6:
bit 4-0
ADCPC1: A/D CONVERT PAIR CONTROL REGISTER 1 (CONTINUED)
TRGSRC2<4:0>: Trigger 2 Source Selection bits
Selects trigger source for conversion of analog channels AN5 and AN4.
00000 = No conversion enabled
00001 = Individual software trigger selected
00010 = Global software trigger selected
00011 = PWM Special Event Trigger selected
00100 = PWM Generator 1 primary trigger selected
00101 = PWM Generator 2 primary trigger selected
00110 = PWM Generator 3 primary trigger selected
00111 = PWM Generator 4 primary trigger selected
01000 = Reserved
•
•
•
01100 = Timer1 period match
01101 = Reserved
01110 = PWM Generator 1 secondary trigger selected
01111 = PWM Generator 2 secondary trigger selected
10000 = PWM Generator 3 secondary trigger selected
10001 = PWM Generator 4 secondary trigger selected
10010 = Reserved
•
•
•
10110 = Reserved
10111 = PWM Generator 1 current-limit ADC trigger
11000 = PWM Generator 2 current-limit ADC trigger
11001 = PWM Generator 3 current-limit ADC trigger
11010 = PWM Generator 4 current-limit ADC trigger
11011 = Reserved
•
•
•
11111 = Timer2 period match
Note 1: These bits are available in the dsPIC33FJ16GS402/404, dsPIC33FJ16GS504, dsPIC33FJ16GS502 and
dsPIC33FJ06GS101 devices only.
2: These bits are available in the dsPIC33FJ16GS502, dsPIC33FJ16GS504, dsPIC33FJ06GS102,
dsPIC33FJ06GS202 and dsPIC33FJ16GS402/404 devices only.
3: If other conversions are in progress, then conversion will be performed when the conversion resources are
available.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 253
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-7:
ADCPC2: A/D CONVERT PAIR CONTROL REGISTER 2(1)
R/W-0
R/W-0
R/W-0
IRQEN5
PEND5
SWTRG5
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC5<4:0>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
IRQEN4
PEND4
SWTRG4
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC4<4:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
IRQEN5: Interrupt Request Enable 5 bit
1 = Enable IRQ generation when requested conversion of channels AN11 and AN10 is completed
0 = IRQ is not generated
bit 14
PEND5: Pending Conversion Status 5 bit
1 = Conversion of channels AN11 and AN10 is pending; set when selected trigger is asserted
0 = Conversion is complete
bit 13
SWTRG5: Software Trigger 5 bit
1 = Start conversion of AN11 and AN10 (if selected in TRGSRC bits)(2)
This bit is automatically cleared by hardware when the PEND5 bit is set.
0 = Conversion is not started
Note 1: This register is only implemented on the dsPIC33FJ16GS504 devices.
2: If other conversions are in progress, then conversion will be performed when the conversion resources are
available.
DS70318D-page 254
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-7:
bit 12-8
ADCPC2: A/D CONVERT PAIR CONTROL REGISTER 2(1) (CONTINUED)
TRGSRC5<4:0>: Trigger 5 Source Selection bits
Selects trigger source for conversion of analog channels AN11 and AN10.
00000 = No conversion enabled
00001 = Individual software trigger selected
00010 = Global software trigger selected
00011 = PWM Special Event Trigger selected
00100 = PWM Generator 1 primary trigger selected
00101 = PWM Generator 2 primary trigger selected
00110 = PWM Generator 3 primary trigger selected
00111 = PWM Generator 4 primary trigger selected
01000 = Reserved
•
•
•
01100 = Timer1 period match
01101 = Reserved
01110 = PWM Generator 1 secondary trigger selected
01111 = PWM Generator 2 secondary trigger selected
10000 = PWM Generator 3 secondary trigger selected
10001 = PWM Generator 4 secondary trigger selected
10010 = Reserved
•
•
•
10110 = Reserved
10111 = PWM Generator 1 current-limit ADC trigger
11000 = PWM Generator 2 current-limit ADC trigger
11001 = PWM Generator 3 current-limit ADC trigger
11010 = PWM Generator 4 current-limit ADC trigger
11011 = Reserved
•
•
•
11111 = Timer2 period match
bit 7
IRQEN4: Interrupt Request Enable 4 bit
1 = Enable IRQ generation when requested conversion of channels AN9 and AN8 is completed
0 = IRQ is not generated
bit 6
PEND4: Pending Conversion Status 4 bit
1 = Conversion of channels AN9 and AN8 is pending; set when selected trigger is asserted
0 = Conversion is complete
bit 5
SWTRG4: Software Trigger4 bit
1 = Start conversion of AN9 and AN8 (if selected by TRGSRC bits)(2)
This bit is automatically cleared by hardware when the PEND4 bit is set.
0 = Conversion is not started
Note 1: This register is only implemented on the dsPIC33FJ16GS504 devices.
2: If other conversions are in progress, then conversion will be performed when the conversion resources are
available.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 255
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-7:
bit 4-0
ADCPC2: A/D CONVERT PAIR CONTROL REGISTER 2(1) (CONTINUED)
TRGSRC4<4:0>: Trigger 4 Source Selection bits
Selects trigger source for conversion of analog channels AN9 and AN8.
00000 = No conversion enabled
00001 = Individual software trigger selected
00010 = Global software trigger selected
00011 = PWM Special Event Trigger selected
00100 = PWM Generator 1 primary trigger selected
00101 = PWM Generator 2 primary trigger selected
00110 = PWM Generator 3 primary trigger selected
00111 = PWM Generator 4 primary trigger selected
01000 = Reserved
•
•
•
01100 = Timer1 period match
01101 = Reserved
01110 = PWM Generator 1 secondary trigger selected
01111 = PWM Generator 2 secondary trigger selected
10000 = PWM Generator 3 secondary trigger selected
10001 = PWM Generator 4 secondary trigger selected
10010 = Reserved
•
•
•
10110 = Reserved
10111 = PWM Generator 1 current-limit ADC trigger
11000 = PWM Generator 2 current-limit ADC trigger
11001 = PWM Generator 3 current-limit ADC trigger
11010 = PWM Generator 4 current-limit ADC trigger
11011 = Reserved
•
•
•
11111 = Timer2 period match
Note 1: This register is only implemented on the dsPIC33FJ16GS504 devices.
2: If other conversions are in progress, then conversion will be performed when the conversion resources are
available.
DS70318D-page 256
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-8:
ADCPC3: A/D CONVERT PAIR CONTROL REGISTER 3(1)
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
R/W-0
R/W-0
R/W-0
IRQEN6
PEND6
SWTRG6
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC6<4:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-8
Unimplemented: Read as ‘0’
bit 7
IRQEN6: Interrupt Request Enable 6 bit
1 = Enable IRQ generation when requested conversion of channels AN13 and AN12 is completed
0 = IRQ is not generated
bit 6
PEND6: Pending Conversion Status 6 bit
1 = Conversion of channels AN13 and AN 12 is pending; set when selected trigger is asserted
0 = Conversion is complete
bit 5
SWTRG6: Software Trigger 6 bit
1 = Start conversion of AN13 (INTREF) and AN12 (EXTREF) (if selected by TRGSRC bits)(2)
This bit is automatically cleared by hardware when the PEND6 bit is set.
0 = Conversion is not started
Note 1: This register is only implemented on the dsPIC33FJ16GS502 and dsPIC33FJ16GS504 devices.
2: If other conversions are in progress, conversion will be performed when the conversion resources are
available.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 257
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-8:
bit 4-0
ADCPC3: A/D CONVERT PAIR CONTROL REGISTER 3(1) (CONTINUED)
TRGSRC6<4:0>: Trigger 6 Source Selection bits
Selects trigger source for conversion of analog channels AN13 and AN12.
00000 = No conversion enabled
00001 = Individual software trigger selected
00010 = Global software trigger selected
00011 = PWM Special Event Trigger selected
00100 = PWM Generator 1 primary trigger selected
00101 = PWM Generator 2 primary trigger selected
00110 = PWM Generator 3 primary trigger selected
00111 = PWM Generator 4 primary trigger selected
01000 = Reserved
•
•
•
01100 = Timer1 period match
01101 = Reserved
01110 = PWM Generator 1 secondary trigger selected
01111 = PWM Generator 2 secondary trigger selected
10000 = PWM Generator 3 secondary trigger selected
10001 = PWM Generator 4 secondary trigger selected
10010 = Reserved
•
•
•
10110 = Reserved
10111 = PWM Generator 1 current-limit ADC trigger
11000 = PWM Generator 2 current-limit ADC trigger
11001 = PWM Generator 3 current-limit ADC trigger
11010 = PWM Generator 4 current-limit ADC trigger
11011 = Reserved
•
•
•
11111 = Timer2 period match
Note 1: This register is only implemented on the dsPIC33FJ16GS502 and dsPIC33FJ16GS504 devices.
2: If other conversions are in progress, conversion will be performed when the conversion resources are
available.
DS70318D-page 258
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
20.0
• DAC has three ranges of operation:
- AVDD/2
- Internal Reference 1.2V, 1%
- External Reference < (AVDD – 1.6V)
• ADC sample and convert trigger capability
• Disable capability reduces power consumption
• Functional support for PWM module:
- PWM duty cycle control
- PWM period control
- PWM Fault detect
HIGH-SPEED ANALOG
COMPARATOR
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F Family
Reference
Manual”,
Section
45.
“High-Speed Analog Comparator”
(DS70296), which is available on the
Microchip web site (www.microchip.com).
Note:
20.2
Figure 20-1 shows a functional block diagram of one
analog comparator from the SMPS comparator
module. The analog comparator provides high-speed
operation with a typical delay of 20 ns. The comparator
has a typical offset voltage of ±5 mV. The negative
input of the comparator is always connected to the
DAC circuit. The positive input of the comparator is
connected to an analog multiplexer that selects the
desired source pin.
The dsPIC33F SMPS Comparator module monitors
current and/or voltage transients that may be too fast
for the CPU and ADC to capture.
20.1
Features Overview
The SMPS comparator module offers the following
major features:
•
•
•
•
•
•
16 selectable comparator inputs
Up to four analog comparators
10-bit DAC for each analog comparator
Programmable output polarity
Interrupt generation capability
DACOUT pin to provide DAC output
FIGURE 20-1:
Module Description
The analog comparator input pins are typically shared
with pins used by the Analog-to-Digital Converter
(ADC) module. Both the comparator and the ADC can
use the same pins at the same time. This capability
enables a user to measure an input voltage with the
ADC and detect voltage transients with the
comparator.
COMPARATOR MODULE BLOCK DIAGRAM
INSEL<1:0>
CMPxA(1)
CMPxB(1)
ACMPx (Trigger to PWM)(1)
M
U
X
CMPxC(1)
Status
0
CMPx*
CMPxD(1)
Glitch Filter
1
RANGE
AVDD/2
M
U
X
INTREF
CMPPOL
DACOUT
DAC
AVSS
Pulse
Generator
Interrupt Request
10
CMREF
DACOE
EXTREF
Note 1:
x = 1, 2, 3, and 4.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 259
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
20.3
Module Applications
20.5
Interaction with I/O Buffers
This module provides a means for the SMPS dsPIC
DSC devices to monitor voltage and currents in a
power conversion application. The ability to detect
transient conditions and stimulate the dsPIC DSC
processor and/or peripherals, without requiring the
processor and ADC to constantly monitor voltages or
currents, frees the dsPIC DSC to perform other tasks.
If the comparator module is enabled and a pin has
been selected as the source for the comparator, then
the chosen I/O pad must disable the digital input buffer
associated with the pad to prevent excessive currents
in the digital buffer due to analog input voltages.
The comparator module has a high-speed comparator
and an associated 10-bit DAC that provides a
programmable reference voltage to the inverting input
of the comparator. The polarity of the comparator output is user-programmable. The output of the module
can be used in the following modes:
The CMPCONx register (see Register 20-1) provides
the control logic that configures the comparator
module. The digital logic provides a glitch filter for the
comparator output to mask transient signals in less
than two instruction cycles. In Sleep or Idle mode, the
glitch filter is bypassed to enable an asynchronous
path from the comparator to the interrupt controller.
This asynchronous path can be used to wake-up the
processor from Sleep or Idle mode.
•
•
•
•
•
Generate an Interrupt
Trigger an ADC Sample and Convert Process
Truncate the PWM Signal (current limit)
Truncate the PWM Period (current minimum)
Disable the PWM Outputs (Fault latch)
The output of the comparator module may be used in
multiple modes at the same time, such as: (1)
generate an interrupt, (2) have the ADC take a sample
and convert it, and (3) truncate the PWM output in
response to a voltage being detected beyond its
expected value.
The comparator module can also be used to wake-up
the system from Sleep or Idle mode when the analog
input voltage exceeds the programmed threshold
voltage.
20.4
DAC
The range of the DAC is controlled via an analog
multiplexer that selects either AVDD/2, internal 1.2V,
1% reference, or an external reference source,
EXTREF. The full range of the DAC (AVDD/2) will
typically be used when the chosen input source pin is
shared with the ADC. The reduced range option
(INTREF) will likely be used when monitoring current
levels using a current sense resistor. Usually, the
measured voltages in such applications are small
(<1.25V); therefore the option of using a reduced
reference range for the comparator extends the
available DAC resolution in these applications. The
use of an external reference enables the user to
connect to a reference that better suits their
application.
DACOUT, shown in Figure 20-1, can only be
associated with a single comparator at a given time.
Note:
It should be ensured in software that
multiple DACOE bits are not set. The
output on the DACOUT pin will be indeterminate if multiple comparators enable the
DAC output.
DS70318D-page 260
20.6
Digital Logic
The comparator can be disabled while in Idle mode if
the CMPSIDL bit is set. If a device has multiple
comparators, if any CMPSIDL bit is set, then the entire
group of comparators will be disabled while in Idle
mode. This behavior reduces complexity in the design
of the clock control logic for this module.
The digital logic also provides a one TCY width pulse
generator for triggering the ADC and generating
interrupt requests.
The CMPDACx (see Register 20-2) register provides
the digital input value to the reference DAC.
If the module is disabled, the DAC and comparator are
disabled to reduce power consumption.
20.7
Comparator Input Range
The comparator has a limitation for the input Common
Mode Range (CMR) of (AVDD – 1.5V), typical. This
means that both inputs should not exceed this range.
As long as one of the inputs is within the Common
Mode Range, the comparator output will be correct.
However, any input exceeding the CMR limitation will
cause the comparator input to be saturated.
If both inputs exceed the CMR, the comparator output
will be indeterminate.
20.8
DAC Output Range
The DAC has a limitation for the maximum reference
voltage input of (AVDD – 1.6) volts. An external
reference voltage input should not exceed this value or
the reference DAC output will become indeterminate.
20.9
Comparator Registers
The comparator module is controlled by the following
registers:
• CMPCONx: Comparator Control Register
• CMPDACx: Comparator DAC Control Register
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 20-1:
CMPCONx: COMPARATOR CONTROL REGISTER
R/W-0
U-0
R/W-0
U-0
U-0
U-0
U-0
R/W-0
CMPON
—
CMPSIDL
—
—
—
—
DACOE
bit 15
bit 8
R/W-0
R/W-0
INSEL<1:0>
R/W-0
U-0
R/W-0
U-0
R/W-0
R/W-0
EXTREF
—
CMPSTAT
—
CMPPOL
RANGE
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
CMPON: Comparator Operating Mode bit
1 = Comparator module is enabled
0 = Comparator module is disabled (reduces power consumption)
bit 14
Unimplemented: Read as ‘0’
bit 13
CMPSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode.
0 = Continue module operation in Idle mode
If a device has multiple comparators, any CMPSIDL bit set to ‘1’ disables ALL comparators while in
Idle mode.
bit 12-9
Reserved: Read as ‘0’
bit 8
DACOE: DAC Output Enable
1 = DAC analog voltage is output to DACOUT pin(1)
0 = DAC analog voltage is not connected to DACOUT pin
bit 7-6
INSEL<1:0>: Input Source Select for Comparator bits
00 = Select CMPxA input pin
01 = Select CMPxB input pin
10 = Select CMPxC input pin
11 = Select CMPxD input pin
bit 5
EXTREF: Enable External Reference bit
1 = External source provides reference to DAC (maximum DAC voltage determined by external
voltage source)
0 = Internal reference sources provide reference to DAC (maximum DAC voltage determined by
RANGE bit setting)
bit 4
Reserved: Read as ‘0’
bit 3
CMPSTAT: Current State of Comparator Output Including CMPPOL Selection bit
bit 2
Reserved: Read as ‘0’
bit 1
CMPPOL: Comparator Output Polarity Control bit
1 = Output is inverted
0 = Output is non-inverted
bit 0
RANGE: Selects DAC Output Voltage Range bit
1 = High Range: Max DAC Value = AVDD/2, 1.65V at 3.3V AVDD
0 = Low Range: Max DAC Value = INTREF, 1.2V, ±1%
Note 1: DACOUT can be associated only with a single comparator at any given time. The software must ensure
that multiple comparators do not enable the DAC output by setting their respective DACOE bit.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 261
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 20-2:
CMPDACx: COMPARATOR DAC CONTROL REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
R/W-0
R/W-0
CMREF<9:8>
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
CMREF<7:0>
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-10
Reserved: Read as ‘0’
bit 9-0
CMREF<9:0>: Comparator Reference Voltage Select bits
1111111111 = (CMREF * INTREF/1024) or (CMREF * (AVDD/2)/1024) volts depending on RANGE
bit or (CMREF * EXTREF/1024) if EXTREF is set
•
•
•
0000000000 = 0.0 volts
DS70318D-page 262
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
21.0
SPECIAL FEATURES
Note:
21.1
The Configuration bits can be programmed (read
as ‘0’), or left unprogrammed (read as ‘1’), to select
various device configurations. These bits are mapped
starting at program memory location 0xF80000.
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 devices. It is
not intended to be a comprehensive
reference source. To complement the
information in this data sheet, refer to the
“dsPIC33F Family Reference Manual”.
Please see the Microchip web site
(www.microchip.com) for the latest
“dsPIC33F Family Reference Manual”
sections.
The individual Configuration bit descriptions for the
FBS, FGS, FOSCSEL, FOSC, FWDT, FPOR and FICD
Configuration registers are shown in Table 21-2.
Note that address, 0xF80000, is beyond the user program memory space. It belongs to the configuration
memory space (0x800000-0xFFFFFF), which can only
be accessed using table reads and table writes.
The
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices include several
features intended to maximize application flexibility and
reliability, and minimize cost through elimination of
external components. These are:
•
•
•
•
•
•
•
Configuration Bits
The upper byte of all device Configuration registers
should always be ‘1111 1111’. This makes them
appear to be NOP instructions in the remote event that
their locations are ever executed by accident. Since
Configuration bits are not implemented in the
corresponding locations, writing ‘1’s to these locations
has no effect on device operation.
Flexible Configuration
Watchdog Timer (WDT)
Code Protection and CodeGuard™ Security
JTAG Boundary Scan Interface
In-Circuit Serial Programming™ (ICSP™)
In-Circuit Emulation
Brown-out Reset (BOR)
To prevent inadvertent configuration changes during
code execution, all programmable Configuration bits
are write-once. After a bit is initially programmed during
a power cycle, it cannot be written to again. Changing
a device configuration requires that power to the device
be cycled.
The device Configuration register map is shown in
Table 21-1.
TABLE 21-1:
Address
DEVICE CONFIGURATION REGISTER MAP
Name
Bit 7
Bit 6
Bit 5
—
—
—
0xF80000 FBS
Bit 3
—
0xF80004 FGS
—
—
—
IESO
—
—
0xF80008 FOSC
FCKSM<1:0>
0xF8000A FWDT
FWDTEN
WINDIS
0xF8000C FPOR
—
—
0xF8000E FICD
Bit 1
BSS<2:0>
Reserved(1)
—
—
Bit 0
BWRP
GSS<1:0>
—
GWRP
FNOSC<2:0>
IOL1WAY
—
—
WDTPRE
—
—
—
—
JTAGEN
—
—
OSCIOFNC
POSCMD<1:0>
WDTPOST<3:0>
0xF80010 FUID0
User Unit ID Byte 0
0xF80012 FUID1
User Unit ID Byte 1
Note 1:
Bit 2
Reserved(1)
0xF80002 RESERVED
0xF80006 FOSCSEL
Bit 4
FPWRT<2:0>
—
ICS<1:0>
When read, these bits will appear as ‘1’. When you write to these bits, set these bits to ‘1’.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 263
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 21-2:
dsPIC33F CONFIGURATION BITS DESCRIPTION
Bit Field
Register
Description
BWRP
FBS
Boot Segment Program Flash Write Protection bit
1 = Boot segment can be written
0 = Boot segment is write-protected
BSS<2:0>
FBS
Boot Segment Program Flash Code Protection Size bits
X11 = No boot program Flash segment
Boot space is 256 instruction words (except interrupt vectors)
110 = Standard security; boot program Flash segment ends at
0x0003FE
010 = High security; boot program Flash segment ends at 0x0003FE
Boot space is 768 instruction words (except interrupt vectors)
101 = Standard security; boot program Flash segment ends at
0x0007FE
001 = High security; boot program Flash segment ends at 0x0007FE
Boot space is 1792 instruction words (except interrupt vectors)
100 = Standard security; boot program Flash segment ends at
0x000FFE
000 = High security; boot program Flash segment ends at 0x000FFE
GSS<1:0>
FGS
General Segment Code-Protect bits
11 = User program memory is not code-protected
10 = Standard security
0x = High security
GWRP
FGS
General Segment Write-Protect bit
1 = User program memory is not write-protected
0 = User program memory is write-protected
IESO
FOSCSEL
Two-speed Oscillator Start-up Enable bit
1 = Start-up device with FRC, then automatically switch to the
user-selected oscillator source when ready
0 = Start-up device with user-selected oscillator source
FNOSC<2:0>
FOSCSEL
Initial Oscillator Source Selection bits
111 = Internal Fast RC (FRC) oscillator with postscaler
110 = Internal Fast RC (FRC) oscillator with divide-by-16
101 = LPRC oscillator
100 = Secondary (LP) oscillator
011 = Primary (XT, HS, EC) oscillator with PLL
010 = Primary (XT, HS, EC) oscillator
001 = Internal Fast RC (FRC) oscillator with PLL
000 = FRC oscillator
FCKSM<1:0>
FOSC
Clock Switching Mode bits
1x = Clock switching is disabled, Fail-Safe Clock Monitor is disabled
01 = Clock switching is enabled, Fail-Safe Clock Monitor is disabled
00 = Clock switching is enabled, Fail-Safe Clock Monitor is enabled
IOL1WAY
FOSC
Peripheral Pin Select Configuration bit
1 = Allow only one reconfiguration
0 = Allow multiple reconfigurations
OSCIOFNC
FOSC
OSC2 Pin Function bit (except in XT and HS modes)
1 = OSC2 is clock output
0 = OSC2 is general purpose digital I/O pin
POSCMD<1:0>
FOSC
Primary Oscillator Mode Select bits
11 = Primary oscillator disabled
10 = HS Crystal Oscillator mode
01 = XT Crystal Oscillator mode
00 = EC (External Clock) mode
DS70318D-page 264
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 21-2:
dsPIC33F CONFIGURATION BITS DESCRIPTION (CONTINUED)
Bit Field
Register
Description
FWDTEN
FWDT
Watchdog Timer Enable bit
1 = Watchdog Timer always enabled (LPRC oscillator cannot be disabled;
clearing the SWDTEN bit in the RCON register will have no effect)
0 = Watchdog Timer enabled/disabled by user software (LPRC can be
disabled by clearing the SWDTEN bit in the RCON register)
WINDIS
FWDT
Watchdog Timer Window Enable bit
1 = Watchdog Timer in Non-Window mode
0 = Watchdog Timer in Window mode
WDTPRE
FWDT
Watchdog Timer Prescaler bit
1 = 1:128
0 = 1:32
WDTPOST<3:0>
FWDT
Watchdog Timer Postscaler bits
1111 = 1:32,768
1110 = 1:16,384
•
•
•
0001 = 1:2
0000 = 1:1
FPWRT<2:0>
FPOR
Power-on Reset Timer Value Select bits
111 = PWRT = 128 ms
110 = PWRT = 64 ms
101 = PWRT = 32 ms
100 = PWRT = 16 ms
011 = PWRT = 8 ms
010 = PWRT = 4 ms
001 = PWRT = 2 ms
000 = PWRT = Disabled
JTAGEN
FICD
JTAG Enable bit
1 = JTAG is enabled
0 = JTAG is disabled
ICS<1:0>
FICD
ICD Communication Channel Select Enable bits
11 = Communicate on PGEC1 and PGED1
10 = Communicate on PGEC2 and PGED2
01 = Communicate on PGEC3 and PGED3
00 = Reserved, do not use.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 265
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
21.2
On-Chip Voltage Regulator
21.3
The
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices power their core digital
logic at a nominal 2.5V. This can create a conflict for
designs that are required to operate at a higher typical
voltage, such as 3.3V. To simplify system design, all
devices
in
the
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 families incorporate an on-chip
regulator that allows the device to run its core logic from
VDD.
The regulator provides power to the core from the other
VDD pins. When the regulator is enabled, a low-ESR
(less than 5 ohms) capacitor (such as tantalum or
ceramic) must be connected to the VCAP/VDDCORE pin
(Figure 21-1). This helps to maintain the stability of the
regulator. The recommended value for the filter
capacitor is provided in Table 24-13 located in
Section 24.1 “DC Characteristics”.
It is important for the low-ESR capacitor to
be placed as close as possible to the
VCAP/VDDCORE pin.
Note:
On a POR, it takes approximately 20 μs for the on-chip
voltage regulator to generate an output voltage. During
this time, designated as TSTARTUP, code execution is
disabled. TSTARTUP is applied every time the device
resumes operation after any power-down.
FIGURE 21-1:
CONNECTIONS FOR THE
ON-CHIP VOLTAGE
REGULATOR(1,2)
BOR: Brown-Out Reset
The Brown-out Reset (BOR) module is based on an
internal voltage reference circuit that monitors the
regulated supply voltage VCAP/VDDCORE. The main
purpose of the BOR module is to generate a device
Reset when a brown-out condition occurs. Brown-out
conditions are generally caused by glitches on the AC
mains (for example, missing portions of the AC cycle
waveform due to bad power transmission lines, or
voltage sags due to excessive current draw when a
large inductive load is turned on).
A BOR generates a Reset pulse, which resets the
device. The BOR selects the clock source, based on
the device Configuration bit values (FNOSC<2:0> and
POSCMD<1:0>).
If an oscillator mode is selected, the BOR activates the
Oscillator Start-up Timer (OST). The system clock is
held until OST expires. If the PLL is used, the clock is
held until the LOCK bit (OSCCON<5>) is ‘1’.
Concurrently, the PWRT time-out (TPWRT) is applied
before the internal Reset is released. If TPWRT = 0 and
a crystal oscillator is being used, then a nominal delay
of TFSCM = 100 is applied. The total delay in this case
is TFSCM.
The BOR Status bit (RCON<1>) is set to indicate that a
BOR has occurred. The BOR circuit continues to
operate while in Sleep or Idle modes and resets the
device should VDD fall below the BOR threshold
voltage.
3.3V
dsPIC33F
VDD
VCAP/VDDCORE
CEFC
Note 1:
2:
VSS
These are typical operating voltages. Refer to
Table 24-13 located in Section 24.1 “DC
Characteristics” for the full operating
ranges of VDD and VCAP/VDDCORE.
It is important for the low-ESR capacitor to
be placed as close as possible to the
VCAP/VDDCORE pin.
DS70318D-page 266
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
21.4
21.4.2
Watchdog Timer (WDT)
For
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices, the WDT is driven by
the LPRC oscillator. When the WDT is enabled, the clock
source is also enabled.
21.4.1
PRESCALER/POSTSCALER
The nominal WDT clock source from LPRC is 32 kHz.
This feeds a prescaler than can be configured for either
5-bit (divide-by-32) or 7-bit (divide-by-128) operation.
The prescaler is set by the WDTPRE Configuration bit.
With a 32 kHz input, the prescaler yields a nominal
WDT time-out period (TWDT) of 1 ms in 5-bit mode, or
4 ms in 7-bit mode.
A variable postscaler divides down the WDT prescaler
output and allows for a wide range of time-out periods.
The postscaler is controlled by the WDTPOST<3:0>
Configuration bits (FWDT<3:0>) which allow the
selection of 16 settings, from 1:1 to 1:32,768. Using the
prescaler and postscaler, time-out periods ranging from
1 ms to 131 seconds can be achieved.
The WDT, prescaler and postscaler are reset:
• On any device Reset
• On the completion of a clock switch, whether
invoked by software (i.e., setting the OSWEN bit
after changing the NOSC bits) or by hardware
(i.e., Fail-Safe Clock Monitor)
• When a PWRSAV instruction is executed
(i.e., Sleep or Idle mode is entered)
• When the device exits Sleep or Idle mode to
resume normal operation
• By a CLRWDT instruction during normal execution
Note:
SLEEP AND IDLE MODES
If the WDT is enabled, it will continue to run during
Sleep or Idle modes. When the WDT time-out occurs,
the device will wake the device and code execution will
continue from where the PWRSAV instruction was
executed. The corresponding SLEEP or IDLE bits
(RCON<3:2>) will need to be cleared in software after
the device wakes up.
21.4.3
ENABLING WDT
The WDT is enabled or disabled by the FWDTEN
Configuration bit in the FWDT Configuration register.
When the FWDTEN Configuration bit is set, the WDT is
always enabled.
The WDT can be optionally controlled in software when
the FWDTEN Configuration bit has been programmed
to ‘0’. The WDT is enabled in software by setting the
SWDTEN control bit (RCON<5>). The SWDTEN
control bit is cleared on any device Reset. The software
WDT option allows the user application to enable the
WDT for critical code segments and disable the WDT
during non-critical segments for maximum power
savings.
Note:
If the WINDIS bit (FWDT<6>) is cleared, the
CLRWDT instruction should be executed by
the application software only during the last
1/4 of the WDT period. This CLRWDT
window can be determined by using a timer.
If a CLRWDT instruction is executed before
this window, a WDT Reset occurs.
The WDT flag bit, WDTO (RCON<4>), is not automatically
cleared following a WDT time-out. To detect subsequent
WDT events, the flag must be cleared in software.
The CLRWDT and PWRSAV instructions
clear the prescaler and postscaler counts
when executed.
FIGURE 21-2:
WDT BLOCK DIAGRAM
All Device Resets
Transition to New Clock Source
Exit Sleep or Idle Mode
PWRSAV Instruction
CLRWDT Instruction
Watchdog Timer
Sleep/Idle
WDTPRE
SWDTEN
FWDTEN
WDTPOST<3:0>
RS
Prescaler
(Divide by N1)
LPRC Clock
RS
WDT
Wake-up
1
Postscaler
(Divide by N2)
0
WINDIS
WDT
Reset
WDT Window Select
CLRWDT Instruction
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 267
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
21.5
JTAG Interface
21.7
In-Circuit Debugger
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices implement a JTAG
interface, which supports boundary scan device testing, as well as in-circuit programming. Detailed information on this interface will be provided in future
revisions of the document.
When MPLAB® ICD 2 is selected as a debugger, the
in-circuit debugging functionality is enabled. This
function allows simple debugging functions when used
with MPLAB IDE. Debugging functionality is controlled
through the EMUCx (Emulation/Debug Clock) and
EMUDx (Emulation/Debug Data) pin functions.
21.6
Any of the three pairs of debugging clock/data pins can
be used:
In-Circuit Serial Programming
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04
family
digital
signal
controllers can be serially programmed while in the end
application circuit. This is done with two lines for clock
and data and three other lines for power, ground and
the programming sequence. Serial programming
allows customers to manufacture boards with
unprogrammed devices and then program the digital
signal controller just before shipping the product. Serial
programming also allows the most recent firmware or a
custom firmware to be programmed. Refer to the
“dsPIC33F/PIC24H Flash Programming Specification”
(DS70152) for details about In-Circuit Serial
Programming (ICSP).
• PGEC1 and PGED1
• PGEC2 and PGED2
• PGEC3 and PGED3
To use the in-circuit debugger function of the device,
the design must implement ICSP connections to
MCLR, VDD, VSS, and the PGECx/PGEDx pin pair. In
addition, when the feature is enabled, some of the
resources are not available for general use. These
resources include the first 80 bytes of data RAM and
two I/O pins.
Any of the three pairs of programming clock/data pins
can be used:
• PGEC1 and PGED1
• PGEC2 and PGED2
• PGEC3 and PGED3
DS70318D-page 268
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
21.8
The code protection features are controlled by the
Configuration registers: FBS and FGS.
Code Protection and
CodeGuard™ Security
The
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices offer the intermediate
implementation of CodeGuard™ Security. CodeGuard
Security enables multiple parties to securely share
resources (memory, interrupts and peripherals) on a
single chip. This feature helps protect individual
Intellectual Property in collaborative system designs.
Secure segment and RAM protection is not implemented
in
dsPIC33FJ06GS101/X02
and
dsPIC33FJ16GSX02/X04 devices.
Refer to CodeGuard Security Reference
Manual (DS70180) for further information
on usage, configuration and operation of
CodeGuard Security.
Note:
When coupled with software encryption libraries, CodeGuard™ Security can be used to securely update Flash
even when multiple IPs reside on a single chip.
TABLE 21-3:
CODE FLASH SECURITY
SEGMENT SIZES FOR
6-Kbyte DEVICES
Configuration Bits
CODE FLASH SECURITY
SEGMENT SIZES FOR
16-Kbyte DEVICES
Configuration Bits
VS = 256 IW
BSS<2:0> = x11
0K
TABLE 21-4:
GS = 1792 IW
000000h
0001FEh
000200h
0003FEh
000400h
0007FEh
000800h
000FFEh
001000h
VS = 256 IW
BSS<2:0> = x11
0K
GS = 5376 IW
002BFEh
VS = 256 IW
BS = 256 IW
BSS<2:0> = x10
GS = 1536 IW
256
000000h
0001FEh
000200h
0003FEh
000400h
0007FEh
000800h
000FFEh
001000h
002BFEh
VS = 256 IW
BS = 256 IW
BSS<2:0> = x10
256
GS = 5120 IW
002BFEh
VS = 256 IW
BSS<2:0> = x01
BS = 768 IW
768
GS = 1024 IW
000000h
0001FEh
000200h
0003FEh
000400h
0007FEh
000800h
000FFEh
001000h
VS = 256 IW
BSS<2:0> = x01
BSS<2:0> = x00
BS = 1792 IW
1792
000000h
0001FEh
000200h
0003FEh
000400h
0007FEh
000800h
000FFEh
001000h
GS = 4608 IW
VS = 256 IW
BSS<2:0> = x00
BS = 1792 IW
1792
GS = 3584 IW
002BFEh
© 2009 Microchip Technology Inc.
BS = 768 IW
768
002BFEh
VS = 256 IW
000000h
0001FEh
000200h
0003FEh
000400h
0007FEh
000800h
000FFEh
001000h
Preliminary
000000h
0001FEh
000200h
0003FEh
000400h
0007FEh
000800h
000FFEh
001000h
002BFEh
000000h
0001FEh
000200h
0003FEh
000400h
0007FEh
000800h
000FFEh
001000h
002BFEh
000000h
0001FEh
000200h
0003FEh
000400h
0007FEh
000800h
000FFEh
001000h
002BFEh
DS70318D-page 269
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 270
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
22.0
Note:
INSTRUCTION SET SUMMARY
This data sheet summarizes the features
of the dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 devices. It is
not intended to be a comprehensive
reference source. To complement the
information in this data sheet, refer to the
“dsPIC33F Family Reference Manual”.
Please see the Microchip web site
(www.microchip.com) for the latest
“dsPIC33F Family Reference Manual”
sections.
The dsPIC33F instruction set is identical to that of the
dsPIC30F.
Most instructions are a single program memory word
(24 bits). Only three instructions require two program
memory locations.
Each single-word instruction is a 24-bit word, divided
into an 8-bit opcode, which specifies the instruction
type and one or more operands, which further specify
the operation of the instruction.
The instruction set is highly orthogonal and is grouped
into five basic categories:
•
•
•
•
•
Most bit-oriented instructions (including
rotate/shift instructions) have two operands:
simple
• The W register (with or without an address
modifier) or file register (specified by the value of
‘Ws’ or ‘f’)
• The bit in the W register or file register
(specified by a literal value or indirectly by the
contents of register ‘Wb’)
The literal instructions that involve data movement can
use some of the following operands:
• A literal value to be loaded into a W register or file
register (specified by ‘k’)
• The W register or file register where the literal
value is to be loaded (specified by ‘Wb’ or ‘f’)
However, literal instructions that involve arithmetic or
logical operations use some of the following operands:
• The first source operand, which is a register ‘Wb’
without any address modifier
• The second source operand, which is a literal
value
• The destination of the result (only if not the same
as the first source operand), which is typically a
register ‘Wd’ with or without an address modifier
The MAC class of DSP instructions can use some of the
following operands:
Word or byte-oriented operations
Bit-oriented operations
Literal operations
DSP operations
Control operations
Table 22-1 shows the general symbols used in
describing the instructions.
The dsPIC33F instruction set summary in Table 22-2
lists all the instructions, along with the status flags
affected by each instruction.
Most word or byte-oriented W register instructions
(including barrel shift instructions) have three
operands:
• The first source operand, which is typically a
register ‘Wb’ without any address modifier
• The second source operand, which is typically a
register ‘Ws’ with or without an address modifier
• The destination of the result, which is typically a
register ‘Wd’ with or without an address modifier
• The accumulator (A or B) to be used (required
operand)
• The W registers to be used as the two operands
• The X and Y address space prefetch operations
• The X and Y address space prefetch destinations
• The accumulator write-back destination
The other DSP instructions do not involve any
multiplication and can include:
• The accumulator to be used (required)
• The source or destination operand (designated as
Wso or Wdo, respectively) with or without an
address modifier
• The amount of shift specified by a W register,
‘Wn’, or a literal value
The control instructions can use some of the following
operands:
However, word or byte-oriented file register instructions
have two operands:
• A program memory address
• The mode of the table read and table write
instructions
• The file register specified by the value, ‘f’
• The destination, which could be either the file
register, ‘f’, or the W0 register, which is denoted
as ‘WREG’
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 271
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Most instructions are a single word. Certain
double-word instructions are designed to provide all the
required information in these 48 bits. In the second
word, the 8 MSbs are ‘0’s. If this second word is
executed as an instruction (by itself), it will execute as
a NOP.
The double-word instructions execute in two instruction
cycles.
Most single-word instructions are executed in a single
instruction cycle, unless a conditional test is true, or the
program counter is changed as a result of the
instruction. In these cases, the execution takes two
instruction cycles with the additional instruction cycle(s)
TABLE 22-1:
executed as a NOP. Notable exceptions are the BRA
(unconditional/computed branch), indirect CALL/GOTO,
all table reads and writes and RETURN/RETFIE
instructions, which are single-word instructions but take
two or three cycles. Certain instructions that involve
skipping over the subsequent instruction require either
two or three cycles if the skip is performed, depending
on whether the instruction being skipped is a single-word
or two-word instruction. Moreover, double-word moves
require two cycles.
Note:
For more details on the instruction set,
refer to the “dsPIC30F/33F Programmer’s
Reference Manual” (DS70157).
SYMBOLS USED IN OPCODE DESCRIPTIONS
Field
#text
Description
Means literal defined by “text”
(text)
Means “content of text”
[text]
Means “the location addressed by text”
{ }
Optional field or operation
<n:m>
Register bit field
.b
Byte mode selection
.d
Double-Word mode selection
.S
Shadow register select
.w
Word mode selection (default)
Acc
One of two accumulators {A, B}
AWB
Accumulator Write-Back Destination Address register ∈ {W13, [W13]+ = 2}
bit4
4-bit bit selection field (used in word-addressed instructions) ∈ {0...15}
C, DC, N, OV, Z
MCU Status bits: Carry, Digit Carry, Negative, Overflow, Sticky Zero
Expr
Absolute address, label or expression (resolved by the linker)
f
File register address ∈ {0x0000...0x1FFF}
lit1
1-bit unsigned literal ∈ {0,1}
lit4
4-bit unsigned literal ∈ {0...15}
lit5
5-bit unsigned literal ∈ {0...31}
lit8
8-bit unsigned literal ∈ {0...255}
lit10
10-bit unsigned literal ∈ {0...255} for Byte mode, {0:1023} for Word mode
lit14
14-bit unsigned literal ∈ {0...16384}
lit16
16-bit unsigned literal ∈ {0...65535}
lit23
23-bit unsigned literal ∈ {0...8388608}; LSb must be ‘0’
None
Field does not require an entry, can be blank
OA, OB, SA, SB
DSP Status bits: ACCA Overflow, ACCB Overflow, ACCA Saturate, ACCB Saturate
PC
Program Counter
Slit10
10-bit signed literal ∈ {-512...511}
Slit16
16-bit signed literal ∈ {-32768...32767}
Slit6
6-bit signed literal ∈ {-16...16}
Wb
Base W register ∈ {W0..W15}
Wd
Destination W register ∈ { Wd, [Wd], [Wd++], [Wd--], [++Wd], [--Wd] }
Wdo
Destination W register ∈
{ Wnd, [Wnd], [Wnd++], [Wnd--], [++Wnd], [--Wnd], [Wnd+Wb] }
Wm,Wn
Dividend, Divisor Working register pair (Direct Addressing)
DS70318D-page 272
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 22-1:
SYMBOLS USED IN OPCODE DESCRIPTIONS (CONTINUED)
Field
Description
Wm*Wm
Multiplicand and Multiplier Working register pair for Square instructions ∈
{W4 * W4,W5 * W5,W6 * W6,W7 * W7}
Wm*Wn
Multiplicand and Multiplier Working register pair for DSP instructions ∈
{W4 * W5,W4 * W6,W4 * W7,W5 * W6,W5 * W7,W6 * W7}
Wn
One of 16 Working registers ∈ {W0..W15}
Wnd
One of 16 Destination Working registers ∈ {W0...W15}
Wns
One of 16 Source Working registers ∈ {W0...W15}
WREG
W0 (Working register used in file register instructions)
Ws
Source W register ∈ { Ws, [Ws], [Ws++], [Ws--], [++Ws], [--Ws] }
Wso
Source W register ∈
{ Wns, [Wns], [Wns++], [Wns--], [++Wns], [--Wns], [Wns+Wb] }
Wx
X Data Space Prefetch Address register for DSP instructions
∈ {[W8] + = 6, [W8] + = 4, [W8] + = 2, [W8], [W8] - = 6, [W8] - = 4, [W8] - = 2,
[W9] + = 6, [W9] + = 4, [W9] + = 2, [W9], [W9] - = 6, [W9] - = 4, [W9] - = 2,
[W9 + W12], none}
Wxd
X Data Space Prefetch Destination register for DSP instructions ∈ {W4...W7}
Wy
Y Data Space Prefetch Address register for DSP instructions
∈ {[W10] + = 6, [W10] + = 4, [W10] + = 2, [W10], [W10] - = 6, [W10] - = 4, [W10] - = 2,
[W11] + = 6, [W11] + = 4, [W11] + = 2, [W11], [W11] - = 6, [W11] - = 4, [W11] - = 2,
[W11 + W12], none}
Wyd
Y Data Space Prefetch Destination register for DSP instructions ∈ {W4...W7}
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 273
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 22-2:
Base
Instr
#
1
2
3
4
5
6
7
8
9
INSTRUCTION SET OVERVIEW
Assembly
Mnemonic
ADD
ADDC
AND
ASR
BCLR
BRA
BSET
BSW
BTG
Assembly Syntax
Description
# of
# of
Words Cycles
Status Flags
Affected
ADD
Acc
Add Accumulators
1
1
ADD
f
f = f + WREG
1
1
OA,OB,SA,SB
C,DC,N,OV,Z
ADD
f,WREG
WREG = f + WREG
1
1
C,DC,N,OV,Z
ADD
#lit10,Wn
Wd = lit10 + Wd
1
1
C,DC,N,OV,Z
ADD
Wb,Ws,Wd
Wd = Wb + Ws
1
1
C,DC,N,OV,Z
ADD
Wb,#lit5,Wd
Wd = Wb + lit5
1
1
C,DC,N,OV,Z
OA,OB,SA,SB
ADD
Wso,#Slit4,Acc
16-Bit Signed Add to Accumulator
1
1
ADDC
f
f = f + WREG + (C)
1
1
C,DC,N,OV,Z
ADDC
f,WREG
WREG = f + WREG + (C)
1
1
C,DC,N,OV,Z
ADDC
#lit10,Wn
Wd = lit10 + Wd + (C)
1
1
C,DC,N,OV,Z
ADDC
Wb,Ws,Wd
Wd = Wb + Ws + (C)
1
1
C,DC,N,OV,Z
C,DC,N,OV,Z
ADDC
Wb,#lit5,Wd
Wd = Wb + lit5 + (C)
1
1
AND
f
f = f .AND. WREG
1
1
N,Z
AND
f,WREG
WREG = f .AND. WREG
1
1
N,Z
AND
#lit10,Wn
Wd = lit10 .AND. Wd
1
1
N,Z
AND
Wb,Ws,Wd
Wd = Wb .AND. Ws
1
1
N,Z
AND
Wb,#lit5,Wd
Wd = Wb .AND. lit5
1
1
N,Z
ASR
f
f = Arithmetic Right Shift f
1
1
C,N,OV,Z
ASR
f,WREG
WREG = Arithmetic Right Shift f
1
1
C,N,OV,Z
ASR
Ws,Wd
Wd = Arithmetic Right Shift Ws
1
1
C,N,OV,Z
ASR
Wb,Wns,Wnd
Wnd = Arithmetic Right Shift Wb by Wns
1
1
N,Z
ASR
Wb,#lit5,Wnd
Wnd = Arithmetic Right Shift Wb by lit5
1
1
N,Z
BCLR
f,#bit4
Bit Clear f
1
1
None
BCLR
Ws,#bit4
Bit Clear Ws
1
1
None
BRA
C,Expr
Branch if Carry
1
1 (2)
None
BRA
GE,Expr
Branch if Greater Than or Equal
1
1 (2)
None
BRA
GEU,Expr
Branch if Unsigned Greater Than or Equal
1
1 (2)
None
BRA
GT,Expr
Branch if Greater Than
1
1 (2)
None
BRA
GTU,Expr
Branch if Unsigned Greater Than
1
1 (2)
None
BRA
LE,Expr
Branch if Less Than or Equal
1
1 (2)
None
BRA
LEU,Expr
Branch if Unsigned Less Than or Equal
1
1 (2)
None
BRA
LT,Expr
Branch if Less Than
1
1 (2)
None
BRA
LTU,Expr
Branch if Unsigned Less Than
1
1 (2)
None
BRA
N,Expr
Branch if Negative
1
1 (2)
None
BRA
NC,Expr
Branch if Not Carry
1
1 (2)
None
BRA
NN,Expr
Branch if Not Negative
1
1 (2)
None
BRA
NOV,Expr
Branch if Not Overflow
1
1 (2)
None
BRA
NZ,Expr
Branch if Not Zero
1
1 (2)
None
BRA
OA,Expr
Branch if Accumulator A Overflow
1
1 (2)
None
BRA
OB,Expr
Branch if Accumulator B Overflow
1
1 (2)
None
BRA
OV,Expr
Branch if Overflow
1
1 (2)
None
BRA
SA,Expr
Branch if Accumulator A Saturated
1
1 (2)
None
BRA
SB,Expr
Branch if Accumulator B Saturated
1
1 (2)
None
BRA
Expr
Branch Unconditionally
1
2
None
BRA
Z,Expr
Branch if Zero
1
1 (2)
None
BRA
Wn
Computed Branch
1
2
None
BSET
f,#bit4
Bit Set f
1
1
None
BSET
Ws,#bit4
Bit Set Ws
1
1
None
BSW.C
Ws,Wb
Write C bit to Ws<Wb>
1
1
None
BSW.Z
Ws,Wb
Write Z bit to Ws<Wb>
1
1
None
BTG
f,#bit4
Bit Toggle f
1
1
None
BTG
Ws,#bit4
Bit Toggle Ws
1
1
None
DS70318D-page 274
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 22-2:
Base
Instr
#
10
11
12
13
INSTRUCTION SET OVERVIEW (CONTINUED)
Assembly
Mnemonic
BTSC
BTSS
BTST
BTSTS
Assembly Syntax
Description
# of
# of
Words Cycles
Status Flags
Affected
BTSC
f,#bit4
Bit Test f, Skip if Clear
1
1
(2 or 3)
None
BTSC
Ws,#bit4
Bit Test Ws, Skip if Clear
1
1
(2 or 3)
None
BTSS
f,#bit4
Bit Test f, Skip if Set
1
1
(2 or 3)
None
BTSS
Ws,#bit4
Bit Test Ws, Skip if Set
1
1
(2 or 3)
None
BTST
f,#bit4
Bit Test f
1
1
Z
BTST.C
Ws,#bit4
Bit Test Ws to C
1
1
C
BTST.Z
Ws,#bit4
Bit Test Ws to Z
1
1
Z
BTST.C
Ws,Wb
Bit Test Ws<Wb> to C
1
1
C
BTST.Z
Ws,Wb
Bit Test Ws<Wb> to Z
1
1
Z
BTSTS
f,#bit4
Bit Test then Set f
1
1
Z
BTSTS.C
Ws,#bit4
Bit Test Ws to C, then Set
1
1
C
BTSTS.Z
Ws,#bit4
Bit Test Ws to Z, then Set
1
1
Z
2
2
None
14
CALL
CALL
lit23
Call Subroutine
CALL
Wn
Call Indirect Subroutine
1
2
None
15
CLR
CLR
f
f = 0x0000
1
1
None
CLR
WREG
WREG = 0x0000
1
1
None
CLR
Ws
Ws = 0x0000
1
1
None
CLR
Acc,Wx,Wxd,Wy,Wyd,AWB
Clear Accumulator
1
1
OA,OB,SA,SB
16
CLRWDT
CLRWDT
Clear Watchdog Timer
1
1
WDTO,Sleep
17
COM
COM
f
f=f
1
1
N,Z
COM
f,WREG
WREG = f
1
1
N,Z
COM
Ws,Wd
Wd = Ws
1
1
N,Z
CP
f
Compare f with WREG
1
1
C,DC,N,OV,Z
CP
Wb,#lit5
Compare Wb with lit5
1
1
C,DC,N,OV,Z
CP
Wb,Ws
Compare Wb with Ws (Wb – Ws)
1
1
C,DC,N,OV,Z
CP0
f
Compare f with 0x0000
1
1
C,DC,N,OV,Z
CP0
Ws
Compare Ws with 0x0000
1
1
C,DC,N,OV,Z
18
19
20
CP
CP0
CPB
CPB
f
Compare f with WREG, with Borrow
1
1
C,DC,N,OV,Z
CPB
Wb,#lit5
Compare Wb with lit5, with Borrow
1
1
C,DC,N,OV,Z
CPB
Wb,Ws
Compare Wb with Ws, with Borrow
(Wb – Ws – C)
1
1
C,DC,N,OV,Z
21
CPSEQ
CPSEQ
Wb, Wn
Compare Wb with Wn, Skip if =
1
1
(2 or 3)
None
22
CPSGT
CPSGT
Wb, Wn
Compare Wb with Wn, Skip if >
1
1
(2 or 3)
None
23
CPSLT
CPSLT
Wb, Wn
Compare Wb with Wn, Skip if <
1
1
(2 or 3)
None
24
CPSNE
CPSNE
Wb, Wn
Compare Wb with Wn, Skip if ≠
1
1
(2 or 3)
None
25
DAW
DAW
Wn
Wn = Decimal Adjust Wn
1
1
C
26
DEC
DEC
f
f=f–1
1
1
C,DC,N,OV,Z
DEC
f,WREG
WREG = f – 1
1
1
C,DC,N,OV,Z
DEC
Ws,Wd
Wd = Ws – 1
1
1
C,DC,N,OV,Z
DEC2
f
f=f–2
1
1
C,DC,N,OV,Z
DEC2
f,WREG
WREG = f – 2
1
1
C,DC,N,OV,Z
DEC2
Ws,Wd
Wd = Ws – 2
1
1
C,DC,N,OV,Z
DISI
#lit14
Disable Interrupts for k Instruction Cycles
1
1
None
27
28
DEC2
DISI
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 275
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 22-2:
Base
Instr
#
29
INSTRUCTION SET OVERVIEW (CONTINUED)
Assembly
Mnemonic
DIV
Assembly Syntax
# of
# of
Words Cycles
Description
Status Flags
Affected
DIV.S
Wm,Wn
Signed 16/16-bit Integer Divide
1
18
N,Z,C,OV
DIV.SD
Wm,Wn
Signed 32/16-bit Integer Divide
1
18
N,Z,C,OV
DIV.U
Wm,Wn
Unsigned 16/16-bit Integer Divide
1
18
N,Z,C,OV
DIV.UD
Wm,Wn
Unsigned 32/16-bit Integer Divide
1
18
N,Z,C,OV
Signed 16/16-bit Fractional Divide
1
18
N,Z,C,OV
None
30
DIVF
DIVF
31
DO
DO
#lit14,Expr
Do code to PC + Expr, lit14 + 1 times
2
2
DO
Wn,Expr
Do code to PC + Expr, (Wn) + 1 times
2
2
None
Wm,Wn
32
ED
ED
Wm*Wm,Acc,Wx,Wy,Wxd
Euclidean Distance (no accumulate)
1
1
OA,OB,OAB,
SA,SB,SAB
33
EDAC
EDAC
Wm*Wm,Acc,Wx,Wy,Wxd
Euclidean Distance
1
1
OA,OB,OAB,
SA,SB,SAB
34
EXCH
EXCH
Wns,Wnd
Swap Wns with Wnd
1
1
None
35
FBCL
FBCL
Ws,Wnd
Find Bit Change from Left (MSb) Side
1
1
C
36
FF1L
FF1L
Ws,Wnd
Find First One from Left (MSb) Side
1
1
C
37
FF1R
FF1R
Ws,Wnd
Find First One from Right (LSb) Side
1
1
C
38
GOTO
GOTO
Expr
Go to Address
2
2
None
GOTO
Wn
Go to Indirect
1
2
None
INC
f
f=f+1
1
1
C,DC,N,OV,Z
INC
f,WREG
WREG = f + 1
1
1
C,DC,N,OV,Z
INC
Ws,Wd
Wd = Ws + 1
1
1
C,DC,N,OV,Z
INC2
f
f=f+2
1
1
C,DC,N,OV,Z
INC2
f,WREG
WREG = f + 2
1
1
C,DC,N,OV,Z
39
40
41
42
INC
INC2
IOR
LAC
INC2
Ws,Wd
Wd = Ws + 2
1
1
C,DC,N,OV,Z
IOR
f
f = f .IOR. WREG
1
1
N,Z
IOR
f,WREG
WREG = f .IOR. WREG
1
1
N,Z
IOR
#lit10,Wn
Wd = lit10 .IOR. Wd
1
1
N,Z
IOR
Wb,Ws,Wd
Wd = Wb .IOR. Ws
1
1
N,Z
IOR
Wb,#lit5,Wd
Wd = Wb .IOR. lit5
1
1
N,Z
LAC
Wso,#Slit4,Acc
Load Accumulator
1
1
OA,OB,OAB,
SA,SB,SAB
43
LNK
LNK
#lit14
Link Frame Pointer
1
1
None
44
LSR
LSR
f
f = Logical Right Shift f
1
1
C,N,OV,Z
LSR
f,WREG
WREG = Logical Right Shift f
1
1
C,N,OV,Z
LSR
Ws,Wd
Wd = Logical Right Shift Ws
1
1
C,N,OV,Z
LSR
Wb,Wns,Wnd
Wnd = Logical Right Shift Wb by Wns
1
1
N,Z
LSR
Wb,#lit5,Wnd
Wnd = Logical Right Shift Wb by lit5
1
1
N,Z
MAC
Wm*Wn,Acc,Wx,Wxd,Wy,Wyd
,
AWB
Multiply and Accumulate
1
1
OA,OB,OAB,
SA,SB,SAB
MAC
Wm*Wm,Acc,Wx,Wxd,Wy,Wyd
Square and Accumulate
1
1
OA,OB,OAB,
SA,SB,SAB
MOV
f,Wn
Move f to Wn
1
1
None
MOV
f
Move f to f
1
1
N,Z
MOV
f,WREG
Move f to WREG
1
1
N,Z
MOV
#lit16,Wn
Move 16-Bit Literal to Wn
1
1
None
MOV.b
#lit8,Wn
Move 8-Bit Literal to Wn
1
1
None
MOV
Wn,f
Move Wn to f
1
1
None
MOV
Wso,Wdo
Move Ws to Wd
1
1
None
MOV
WREG,f
Move WREG to f
1
1
N,Z
Wns,Wd
Move Double from W(ns):W(ns + 1) to Wd
1
2
None
Ws,Wnd
Move Double from Ws to W(nd + 1):W(nd)
1
2
None
Prefetch and Store Accumulator
1
1
None
45
46
MAC
MOV
MOV.D
MOV.D
47
MOVSAC
MOVSAC
DS70318D-page 276
Acc,Wx,Wxd,Wy,Wyd,AWB
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 22-2:
Base
Instr
#
48
INSTRUCTION SET OVERVIEW (CONTINUED)
Assembly
Mnemonic
MPY
Assembly Syntax
Description
# of
# of
Words Cycles
Status Flags
Affected
MPY
Wm*Wn,Acc,Wx,Wxd,Wy,Wyd
Multiply Wm by Wn to Accumulator
1
1
OA,OB,OAB,
SA,SB,SAB
MPY
Wm*Wm,Acc,Wx,Wxd,Wy,Wyd
Square Wm to Accumulator
1
1
OA,OB,OAB,
SA,SB,SAB
49
MPY.N
MPY.N
Wm*Wn,Acc,Wx,Wxd,Wy,Wyd
-(Multiply Wm by Wn) to Accumulator
1
1
None
50
MSC
MSC
Wm*Wm,Acc,Wx,Wxd,Wy,Wyd
,
AWB
Multiply and Subtract from Accumulator
1
1
OA,OB,OAB,
SA,SB,SAB
51
MUL
MUL.SS
Wb,Ws,Wnd
{Wnd + 1, Wnd} = signed(Wb) * signed(Ws)
1
1
None
MUL.SU
Wb,Ws,Wnd
{Wnd + 1, Wnd} = signed(Wb) * unsigned(Ws)
1
1
None
MUL.US
Wb,Ws,Wnd
{Wnd + 1, Wnd} = unsigned(Wb) * signed(Ws)
1
1
None
MUL.UU
Wb,Ws,Wnd
{Wnd + 1, Wnd} = unsigned(Wb) *
unsigned(Ws)
1
1
None
MUL.SU
Wb,#lit5,Wnd
{Wnd + 1, Wnd} = signed(Wb) * unsigned(lit5)
1
1
None
MUL.UU
Wb,#lit5,Wnd
{Wnd + 1, Wnd} = unsigned(Wb) *
unsigned(lit5)
1
1
None
MUL
f
W3:W2 = f * WREG
1
1
None
NEG
Acc
Negate Accumulator
1
1
OA,OB,OAB,
SA,SB,SAB
52
53
54
NEG
NOP
POP
NEG
f
f=f+1
1
1
C,DC,N,OV,Z
NEG
f,WREG
WREG = f + 1
1
1
C,DC,N,OV,Z
NEG
Ws,Wd
Wd = Ws + 1
1
1
C,DC,N,OV,Z
NOP
No Operation
1
1
None
NOPR
No Operation
1
1
None
None
POP
f
Pop f from Top-of-Stack (TOS)
1
1
POP
Wdo
Pop from Top-of-Stack (TOS) to Wdo
1
1
None
POP.D
Wnd
Pop from Top-of-Stack (TOS) to
W(nd):W(nd + 1)
1
2
None
Pop Shadow Registers
1
1
All
f
Push f to Top-of-Stack (TOS)
1
1
None
PUSH
Wso
Push Wso to Top-of-Stack (TOS)
1
1
None
PUSH.D
Wns
Push W(ns):W(ns + 1) to Top-of-Stack (TOS)
1
2
None
Push Shadow Registers
1
1
None
Go into Sleep or Idle mode
1
1
WDTO,Sleep
POP.S
55
PUSH
PUSH
PUSH.S
56
PWRSAV
PWRSAV
57
RCALL
RCALL
Expr
Relative Call
1
2
None
RCALL
Wn
Computed Call
1
2
None
REPEAT
#lit14
Repeat Next Instruction lit14 + 1 times
1
1
None
REPEAT
Wn
Repeat Next Instruction (Wn) + 1 times
1
1
None
None
58
REPEAT
#lit1
59
RESET
RESET
Software Device Reset
1
1
60
RETFIE
RETFIE
Return from interrupt
1
3 (2)
None
61
RETLW
RETLW
Return with Literal in Wn
1
3 (2)
None
62
RETURN
RETURN
Return from Subroutine
1
3 (2)
None
63
RLC
RLC
f
f = Rotate Left through Carry f
1
1
C,N,Z
RLC
f,WREG
WREG = Rotate Left through Carry f
1
1
C,N,Z
RLC
Ws,Wd
Wd = Rotate Left through Carry Ws
1
1
C,N,Z
RLNC
f
f = Rotate Left (No Carry) f
1
1
N,Z
RLNC
f,WREG
WREG = Rotate Left (No Carry) f
1
1
N,Z
RLNC
Ws,Wd
Wd = Rotate Left (No Carry) Ws
1
1
N,Z
RRC
f
f = Rotate Right through Carry f
1
1
C,N,Z
RRC
f,WREG
WREG = Rotate Right through Carry f
1
1
C,N,Z
RRC
Ws,Wd
Wd = Rotate Right through Carry Ws
1
1
C,N,Z
64
65
RLNC
RRC
#lit10,Wn
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 277
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 22-2:
Base
Instr
#
66
INSTRUCTION SET OVERVIEW (CONTINUED)
Assembly
Mnemonic
RRNC
Assembly Syntax
Description
# of
# of
Words Cycles
Status Flags
Affected
RRNC
f
f = Rotate Right (No Carry) f
1
1
N,Z
RRNC
f,WREG
WREG = Rotate Right (No Carry) f
1
1
N,Z
RRNC
Ws,Wd
Wd = Rotate Right (No Carry) Ws
1
1
N,Z
67
SAC
SAC
Acc,#Slit4,Wdo
Store Accumulator
1
1
None
SAC.R
Acc,#Slit4,Wdo
Store Rounded Accumulator
1
1
None
68
SE
SE
Ws,Wnd
Wnd = Sign-Extended Ws
1
1
C,N,Z
69
SETM
SETM
f
f = 0xFFFF
1
1
None
SETM
WREG
WREG = 0xFFFF
1
1
None
SETM
Ws
Ws = 0xFFFF
1
1
None
SFTAC
Acc,Wn
Arithmetic Shift Accumulator by (Wn)
1
1
OA,OB,OAB,
SA,SB,SAB
SFTAC
Acc,#Slit6
Arithmetic Shift Accumulator by Slit6
1
1
OA,OB,OAB,
SA,SB,SAB
SL
f
f = Left Shift f
1
1
C,N,OV,Z
SL
f,WREG
WREG = Left Shift f
1
1
C,N,OV,Z
SL
Ws,Wd
Wd = Left Shift Ws
1
1
C,N,OV,Z
SL
Wb,Wns,Wnd
Wnd = Left Shift Wb by Wns
1
1
N,Z
SL
Wb,#lit5,Wnd
Wnd = Left Shift Wb by lit5
1
1
N,Z
SUB
Acc
Subtract Accumulators
1
1
OA,OB,OAB,
SA,SB,SAB
SUB
f
f = f – WREG
1
1
C,DC,N,OV,Z
SUB
f,WREG
WREG = f – WREG
1
1
C,DC,N,OV,Z
SUB
#lit10,Wn
Wn = Wn – lit10
1
1
C,DC,N,OV,Z
SUB
Wb,Ws,Wd
Wd = Wb – Ws
1
1
C,DC,N,OV,Z
SUB
Wb,#lit5,Wd
Wd = Wb – lit5
1
1
C,DC,N,OV,Z
SUBB
f
f = f – WREG – (C)
1
1
C,DC,N,OV,Z
SUBB
f,WREG
WREG = f – WREG – (C)
1
1
C,DC,N,OV,Z
70
71
72
73
74
75
SFTAC
SL
SUB
SUBB
SUBR
SUBBR
SUBB
#lit10,Wn
Wn = Wn – lit10 – (C)
1
1
C,DC,N,OV,Z
SUBB
Wb,Ws,Wd
Wd = Wb – Ws – (C)
1
1
C,DC,N,OV,Z
SUBB
Wb,#lit5,Wd
Wd = Wb – lit5 – (C)
1
1
SUBR
f
f = WREG – f
1
1
C,DC,N,OV,Z
SUBR
f,WREG
WREG = WREG – f
1
1
C,DC,N,OV,Z
SUBR
Wb,Ws,Wd
Wd = Ws – Wb
1
1
C,DC,N,OV,Z
SUBR
Wb,#lit5,Wd
Wd = lit5 – Wb
1
1
C,DC,N,OV,Z
SUBBR
f
f = WREG – f – (C)
1
1
C,DC,N,OV,Z
C,DC,N,OV,Z
SUBBR
f,WREG
WREG = WREG – f – (C)
1
1
C,DC,N,OV,Z
SUBBR
Wb,Ws,Wd
Wd = Ws – Wb – (C)
1
1
C,DC,N,OV,Z
SUBBR
Wb,#lit5,Wd
Wd = lit5 – Wb – (C)
1
1
C,DC,N,OV,Z
76
SWAP
SWAP.b
Wn
Wn = Nibble Swap Wn
1
1
None
SWAP
Wn
Wn = Byte Swap Wn
1
1
None
77
TBLRDH
TBLRDH
Ws,Wd
Read Prog<23:16> to Wd<7:0>
1
2
None
78
TBLRDL
TBLRDL
Ws,Wd
Read Prog<15:0> to Wd
1
2
None
79
TBLWTH
TBLWTH
Ws,Wd
Write Ws<7:0> to Prog<23:16>
1
2
None
80
TBLWTL
TBLWTL
Ws,Wd
Write Ws to Prog<15:0>
1
2
None
81
ULNK
ULNK
Unlink Frame Pointer
1
1
None
82
XOR
XOR
f
f = f .XOR. WREG
1
1
N,Z
XOR
f,WREG
WREG = f .XOR. WREG
1
1
N,Z
XOR
#lit10,Wn
Wd = lit10 .XOR. Wd
1
1
N,Z
XOR
Wb,Ws,Wd
Wd = Wb .XOR. Ws
1
1
N,Z
XOR
Wb,#lit5,Wd
Wd = Wb .XOR. lit5
1
1
N,Z
ZE
Ws,Wnd
Wnd = Zero-Extend Ws
1
1
C,Z,N
83
ZE
DS70318D-page 278
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
23.0
DEVELOPMENT SUPPORT
23.1
The PIC® microcontrollers are supported with a full
range of hardware and software development tools:
• Integrated Development Environment
- MPLAB® IDE Software
• Assemblers/Compilers/Linkers
- MPASMTM Assembler
- MPLAB C18 and MPLAB C30 C Compilers
- MPLINKTM Object Linker/
MPLIBTM Object Librarian
- MPLAB ASM30 Assembler/Linker/Library
• Simulators
- MPLAB SIM Software Simulator
• Emulators
- MPLAB ICE 2000 In-Circuit Emulator
- MPLAB REAL ICE™ In-Circuit Emulator
• In-Circuit Debugger
- MPLAB ICD 2
• Device Programmers
- PICSTART® Plus Development Programmer
- MPLAB PM3 Device Programmer
- PICkit™ 2 Development Programmer
• Low-Cost Demonstration and Development
Boards and Evaluation Kits
MPLAB Integrated Development
Environment Software
The MPLAB IDE software brings an ease of software
development previously unseen in the 8/16-bit
microcontroller market. The MPLAB IDE is a Windows®
operating system-based application that contains:
• A single graphical interface to all debugging tools
- Simulator
- Programmer (sold separately)
- Emulator (sold separately)
- In-Circuit Debugger (sold separately)
• A full-featured editor with color-coded context
• A multiple project manager
• Customizable data windows with direct edit of
contents
• High-level source code debugging
• Visual device initializer for easy register
initialization
• Mouse over variable inspection
• Drag and drop variables from source to watch
windows
• Extensive on-line help
• Integration of select third party tools, such as
HI-TECH Software C Compilers and IAR
C Compilers
The MPLAB IDE allows you to:
• Edit your source files (either assembly or C)
• One touch assemble (or compile) and download
to PIC MCU emulator and simulator tools
(automatically updates all project information)
• Debug using:
- Source files (assembly or C)
- Mixed assembly and C
- Machine code
MPLAB IDE supports multiple debugging tools in a
single development paradigm, from the cost-effective
simulators, through low-cost in-circuit debuggers, to
full-featured emulators. This eliminates the learning
curve when upgrading to tools with increased flexibility
and power.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 279
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
23.2
MPASM Assembler
23.5
The MPASM Assembler is a full-featured, universal
macro assembler for all PIC MCUs.
The MPASM Assembler generates relocatable object
files for the MPLINK Object Linker, Intel® standard HEX
files, MAP files to detail memory usage and symbol
reference, absolute LST files that contain source lines
and generated machine code and COFF files for
debugging.
The MPASM Assembler features include:
MPLAB ASM30 Assembler produces relocatable
machine code from symbolic assembly language for
dsPIC30F devices. MPLAB C30 C Compiler uses the
assembler to produce its object file. The assembler
generates relocatable object files that can then be
archived or linked with other relocatable object files and
archives to create an executable file. Notable features
of the assembler include:
•
•
•
•
•
•
• Integration into MPLAB IDE projects
• User-defined macros to streamline
assembly code
• Conditional assembly for multi-purpose
source files
• Directives that allow complete control over the
assembly process
Support for the entire dsPIC30F instruction set
Support for fixed-point and floating-point data
Command line interface
Rich directive set
Flexible macro language
MPLAB IDE compatibility
23.6
23.3
MPLAB C18 and MPLAB C30
C Compilers
The MPLAB C18 and MPLAB C30 Code Development
Systems are complete ANSI C compilers for
Microchip’s PIC18 and PIC24 families of microcontrollers and the dsPIC30 and dsPIC33 family of digital
signal controllers. These compilers provide powerful
integration capabilities, superior code optimization and
ease of use not found with other compilers.
For easy source level debugging, the compilers provide
symbol information that is optimized to the MPLAB IDE
debugger.
23.4
MPLINK Object Linker/
MPLIB Object Librarian
The MPLINK Object Linker combines relocatable
objects created by the MPASM Assembler and the
MPLAB C18 C Compiler. It can link relocatable objects
from precompiled libraries, using directives from a
linker script.
MPLAB ASM30 Assembler, Linker
and Librarian
MPLAB SIM Software Simulator
The MPLAB SIM Software Simulator allows code
development in a PC-hosted environment by
simulating the PIC MCUs and dsPIC® DSCs on an
instruction level. On any given instruction, the data
areas can be examined or modified and stimuli can be
applied from a comprehensive stimulus controller.
Registers can be logged to files for further run-time
analysis. The trace buffer and logic analyzer display
extend the power of the simulator to record and track
program execution, actions on I/O, most peripherals
and internal registers.
The MPLAB SIM Software Simulator fully supports
symbolic debugging using the MPLAB C18 and
MPLAB C30 C Compilers, and the MPASM and
MPLAB ASM30 Assemblers. The software simulator
offers the flexibility to develop and debug code outside
of the hardware laboratory environment, making it an
excellent, economical software development tool.
The MPLIB Object Librarian manages the creation and
modification of library files of precompiled code. When
a routine from a library is called from a source file, only
the modules that contain that routine will be linked in
with the application. This allows large libraries to be
used efficiently in many different applications.
The object linker/library features include:
• Efficient linking of single libraries instead of linking
many smaller files
• Enhanced code maintainability by grouping
related modules together
• Flexible creation of libraries with easy module
listing, replacement, deletion and extraction
DS70318D-page 280
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
23.7
MPLAB ICE 2000
High-Performance
In-Circuit Emulator
23.9
The MPLAB ICE 2000 In-Circuit Emulator is intended
to provide the product development engineer with a
complete microcontroller design tool set for PIC
microcontrollers. Software control of the MPLAB ICE
2000 In-Circuit Emulator is advanced by the MPLAB
Integrated Development Environment, which allows
editing, building, downloading and source debugging
from a single environment.
The MPLAB ICE 2000 is a full-featured emulator
system with enhanced trace, trigger and data
monitoring features. Interchangeable processor
modules allow the system to be easily reconfigured for
emulation of different processors. The architecture of
the MPLAB ICE 2000 In-Circuit Emulator allows
expansion to support new PIC microcontrollers.
The MPLAB ICE 2000 In-Circuit Emulator system has
been designed as a real-time emulation system with
advanced features that are typically found on more
expensive development tools. The PC platform and
Microsoft® Windows® 32-bit operating system were
chosen to best make these features available in a
simple, unified application.
23.8
MPLAB REAL ICE In-Circuit
Emulator System
MPLAB REAL ICE In-Circuit Emulator System is
Microchip’s next generation high-speed emulator for
Microchip Flash DSC and MCU devices. It debugs and
programs PIC® Flash MCUs and dsPIC® Flash DSCs
with the easy-to-use, powerful graphical user interface of
the MPLAB Integrated Development Environment (IDE),
included with each kit.
The MPLAB REAL ICE probe is connected to the design
engineer’s PC using a high-speed USB 2.0 interface and
is connected to the target with either a connector
compatible with the popular MPLAB ICD 2 system
(RJ11) or with the new high-speed, noise tolerant,
Low-Voltage Differential Signal (LVDS) interconnection
(CAT5).
MPLAB ICD 2 In-Circuit Debugger
Microchip’s In-Circuit Debugger, MPLAB ICD 2, is a
powerful, low-cost, run-time development tool,
connecting to the host PC via an RS-232 or high-speed
USB interface. This tool is based on the Flash PIC
MCUs and can be used to develop for these and other
PIC MCUs and dsPIC DSCs. The MPLAB ICD 2 utilizes
the in-circuit debugging capability built into the Flash
devices. This feature, along with Microchip’s In-Circuit
Serial ProgrammingTM (ICSPTM) protocol, offers
cost-effective, in-circuit Flash debugging from the
graphical user interface of the MPLAB Integrated
Development Environment. This enables a designer to
develop and debug source code by setting breakpoints,
single stepping and watching variables, and CPU
status and peripheral registers. Running at full speed
enables testing hardware and applications in real
time. MPLAB ICD 2 also serves as a development
programmer for selected PIC devices.
23.10 MPLAB PM3 Device Programmer
The MPLAB PM3 Device Programmer is a universal,
CE compliant device programmer with programmable
voltage verification at VDDMIN and VDDMAX for
maximum reliability. It features a large LCD display
(128 x 64) for menus and error messages and a
modular, detachable socket assembly to support
various package types. The ICSP™ cable assembly is
included as a standard item. In Stand-Alone mode, the
MPLAB PM3 Device Programmer can read, verify and
program PIC devices without a PC connection. It can
also set code protection in this mode. The MPLAB PM3
connects to the host PC via an RS-232 or USB cable.
The MPLAB PM3 has high-speed communications and
optimized algorithms for quick programming of large
memory devices and incorporates an SD/MMC card for
file storage and secure data applications.
MPLAB REAL ICE is field upgradeable through future
firmware downloads in MPLAB IDE. In upcoming
releases of MPLAB IDE, new devices will be supported,
and new features will be added, such as software breakpoints and assembly code trace. MPLAB REAL ICE
offers significant advantages over competitive emulators
including low-cost, full-speed emulation, real-time
variable watches, trace analysis, complex breakpoints, a
ruggedized probe interface and long (up to three meters)
interconnection cables.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 281
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
23.11 PICSTART Plus Development
Programmer
23.13 Demonstration, Development and
Evaluation Boards
The PICSTART Plus Development Programmer is an
easy-to-use, low-cost, prototype programmer. It
connects to the PC via a COM (RS-232) port. MPLAB
Integrated Development Environment software makes
using the programmer simple and efficient. The
PICSTART Plus Development Programmer supports
most PIC devices in DIP packages up to 40 pins.
Larger pin count devices, such as the PIC16C92X and
PIC17C76X, may be supported with an adapter socket.
The PICSTART Plus Development Programmer is CE
compliant.
A wide variety of demonstration, development and
evaluation boards for various PIC MCUs and dsPIC
DSCs allows quick application development on fully
functional systems. Most boards include prototyping
areas for adding custom circuitry and provide application
firmware and source code for examination and modification.
23.12 PICkit 2 Development Programmer
The PICkit™ 2 Development Programmer is a low-cost
programmer and selected Flash device debugger with
an easy-to-use interface for programming many of
Microchip’s baseline, mid-range and PIC18F families of
Flash memory microcontrollers. The PICkit 2 Starter Kit
includes a prototyping development board, twelve
sequential lessons, software and HI-TECH’s PICC™
Lite C compiler, and is designed to help get up to speed
quickly using PIC® microcontrollers. The kit provides
everything needed to program, evaluate and develop
applications using Microchip’s powerful, mid-range
Flash memory family of microcontrollers.
DS70318D-page 282
The boards support a variety of features, including LEDs,
temperature sensors, switches, speakers, RS-232
interfaces, LCD displays, potentiometers and additional
EEPROM memory.
The demonstration and development boards can be
used in teaching environments, for prototyping custom
circuits and for learning about various microcontroller
applications.
In addition to the PICDEM™ and dsPICDEM™
demonstration/development board series of circuits,
Microchip has a line of evaluation kits and demonstration software for analog filter design, KEELOQ® security
ICs, CAN, IrDA®, PowerSmart battery management,
SEEVAL® evaluation system, Sigma-Delta ADC, flow
rate sensing, plus many more.
Check the Microchip web page (www.microchip.com)
for the complete list of demonstration, development
and evaluation kits.
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
24.0
ELECTRICAL CHARACTERISTICS
This section provides an overview of dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 electrical characteristics.
Additional information will be provided in future revisions of this document as it becomes available.
Absolute maximum ratings for the dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 family are listed below.
Exposure to these maximum rating conditions for extended periods may affect device reliability. Functional operation of
the device at these or any other conditions above the parameters indicated in the operation listings of this specification
is not implied.
Absolute Maximum Ratings(1)
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V
Voltage on any combined analog and digital pin and MCLR, with respect to VSS ......................... -0.3V to (VDD + 0.3V)
Voltage on any digital-only pin with respect to VSS .................................................................................. -0.3V to +5.6V
Voltage on VCAP/VDDCORE with respect to VSS ...................................................................................... 2.25V to 2.75V
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into VDD pin(2)...........................................................................................................................250 mA
Maximum output current sunk by any I/O pin(3) ........................................................................................................4 mA
Maximum output current sourced by any I/O pin(3) ...................................................................................................4 mA
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports(2) ...............................................................................................................200 mA
Maximum output current sunk by non-remappable PWM pins ...............................................................................16 mA
Maximum output current sourced by non-remappable PWM pins ..........................................................................16 mA
Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods may affect device reliability.
2: Maximum allowable current is a function of device maximum power dissipation (see Table 24-2).
3: Exceptions are PWMxL, and PWMxH, which are able to sink/source 16 mA, and digital pins, which are able
to sink/source 8 mA.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 283
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
24.1
DC Characteristics
TABLE 24-1:
OPERATING MIPS VS. VOLTAGE
Max MIPS
Characteristic
TABLE 24-2:
VDD Range
(in Volts)
Temp Range
(in °C)
3.0-3.6V
-40°C to +85°C
40
3.0-3.6V
-40°C to +125°C
40
dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04
THERMAL OPERATING CONDITIONS
Rating
Symbol
Min
Typ
Max
Unit
Operating Junction Temperature Range
TJ
-40
—
+125
°C
Operating Ambient Temperature Range
TA
-40
—
+85
°C
Operating Junction Temperature Range
TJ
-40
—
+140
°C
Operating Ambient Temperature Range
TA
-40
—
+125
°C
Industrial Temperature Devices
Extended Temperature Devices
Power Dissipation:
Internal chip power dissipation:
PINT = VDD x (IDD – Σ IOH)
PD
PINT + PI/O
W
PDMAX
(TJ – TA)/θJA
W
I/O Pin Power Dissipation:
I/O = Σ ({VDD – VOH} x IOH) + Σ (VOL x IOL)
Maximum Allowed Power Dissipation
TABLE 24-3:
THERMAL PACKAGING CHARACTERISTICS
Characteristic
Symbol
Typ
Max
Unit
Notes
Package Thermal Resistance, 44-Pin QFN
θJA
28
—
°C/W
1
Package Thermal Resistance, 44-Pin TFQP
θJA
39
—
°C/W
1
Package Thermal Resistance, 28-Pin SPDIP
θJA
42
—
°C/W
1
Package Thermal Resistance, 28-Pin SOIC
θJA
47
—
°C/W
1
Package Thermal Resistance, 28-Pin QFN-S
θJA
34
—
°C/W
1
Package Thermal Resistance, 18-Pin SOIC
θJA
57
—
°C/W
1
Note 1:
Junction to ambient thermal resistance, Theta-JA (θJA) numbers are achieved by package simulations.
DS70318D-page 284
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-4:
DC TEMPERATURE AND VOLTAGE SPECIFICATIONS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
DC CHARACTERISTICS
Param
Symbol
No.
Characteristic
Min
Typ(1)
Max
Units
3.0
—
3.6
V
Conditions
Operating Voltage
Supply Voltage
DC10
VDD
Voltage(2)
DC12
VDR
RAM Data Retention
1.8
—
—
V
DC16
VPOR
VDD Start Voltage(4)
to Ensure Internal
Power-on Reset Signal
—
—
VSS
V
DC17
SVDD
VDD Rise Rate(3)
to Ensure Internal
Power-on Reset Signal
0.03
—
—
DC18
VCORE
VDD Core
Internal Regulator Voltage
2.25
—
2.75
Note 1:
2:
3:
4:
Industrial and extended
V/ms 0-3.0V in 0.1s
V
Voltage is dependent on
load, temperature and
VDD
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
This is the limit to which VDD may be lowered without losing RAM data.
These parameters are characterized but not tested in manufacturing.
VDD voltage must remain at VSS for a minimum of 200 μs to ensure POR.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 285
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-5:
DC CHARACTERISTICS: OPERATING CURRENT (IDD)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
DC CHARACTERISTICS
Parameter
Typical(1)
No.
Max
Units
Conditions
Operating Current (IDD)(2)
DC20d
55
70
mA
-40°C
DC20a
55
70
mA
+25°C
10 MIPS
3.3V
See Note 2
DC20b
55
70
mA
+85°C
DC20c
55
70
mA
+125°C
DC21d
68
85
mA
-40°C
DC21a
68
85
mA
+25°C
16 MIPS
3.3V
See Note 2 and Note 3
DC21b
68
85
mA
+85°C
DC21c
68
85
mA
+125°C
DC22d
78
95
mA
-40°C
DC22a
78
95
mA
+25°C
20 MIPS
3.3V
See Note 2 and Note 3
DC22b
78
95
mA
+85°C
DC22c
78
95
mA
+125°C
DC23d
88
110
mA
-40°C
DC23a
88
110
mA
+25°C
30 MIPS
3.3V
See Note 2 and Note 3
DC23b
88
110
mA
+85°C
DC23c
88
110
mA
+125°C
DC24d
98
120
mA
-40°C
DC24a
98
120
mA
+25°C
40 MIPS
3.3V
See Note 2
DC24b
98
120
mA
+85°C
DC24c
98
120
mA
+125°C
DC25d
128
160
mA
-40°C
40 MIPS
DC25a
125
150
mA
+25°C
See Note 2, except PWM is
3.3V
operating at maximum speed
DC25b
121
150
mA
+85°C
(PTCON2 = 0x0000)
DC25c
119
150
mA
+125°C
DC26d
115
140
mA
-40°C
40 MIPS
DC26a
112
140
mA
+25°C
See Note 2, except PWM is
3.3V
operating at 1/2 speed
DC26b
110
140
mA
+85°C
(PTCON2 = 0x0001)
DC26c
108
140
mA
+125°C
DC27d
111
140
mA
-40°C
40 MIPS
DC27a
108
130
mA
+25°C
See Note 2, except PWM is
3.3V
operating at 1/4 speed
DC27b
105
130
mA
+85°C
(PTCON2 = 0x0002)
DC27c
103
130
mA
+125°C
DC28d
102
130
mA
-40°C
40 MIPS
DC28a
100
120
mA
+25°C
See Note 2, except PWM is
3.3V
operating at 1/8 speed
DC28b
100
120
mA
+85°C
(PTCON2 = 0x0003)
DC28c
100
120
mA
+125°C
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all IDD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to VSS.
MCLR = VDD, WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are
operational. No peripheral modules are operating (PMD bits are all set).
3: These parameters are characterized but not tested in manufacturing.
DS70318D-page 286
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-6:
DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
DC CHARACTERISTICS
Parameter
No.
Typical(1)
Max
Units
Conditions
Idle Current (IIDLE): Core Off Clock On Base Current(2)
DC40d
80
100
mA
-40°C
DC40a
80
100
mA
+25°C
DC40b
80
100
mA
+85°C
DC40c
80
100
mA
+125°C
DC41d
81
100
mA
-40°C
DC41a
81
100
mA
+25°C
DC41b
81
100
mA
+85°C
DC41c
81
100
mA
+125°C
DC42d
82
100
mA
-40°C
DC42a
82
100
mA
+25°C
DC42b
82
100
mA
+85°C
DC42c
82
100
mA
+125°C
DC43d
84
105
mA
-40°C
DC43a
84
105
mA
+25°C
DC43b
84
105
mA
+85°C
DC43c
84
105
mA
+125°C
DC44d
86
105
mA
-40°C
DC44a
86
105
mA
+25°C
DC44b
86
105
mA
+85°C
DC44c
86
105
mA
+125°C
Note 1:
2:
3:
3.3V
10 MIPS
3.3V
16 MIPS(3)
3.3V
20 MIPS(3)
3.3V
30 MIPS(3)
3.3V
40 MIPS
Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
Base IIDLE current is measured with core off, clock on and all modules turned off. Peripheral module
Disable SFR registers are zeroed. All I/O pins are configured as inputs and pulled to VSS.
These parameters are characterized but not tested in manufacturing.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 287
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-7:
DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
DC CHARACTERISTICS
Parameter
No.
Typical(1)
Max
Units
Conditions
Power-Down Current (IPD)(2,4)
DC60d
304
500
μA
-40°C
DC60a
317
500
μA
+25°C
DC60b
321
500
μA
+85°C
DC60c
800
950
μA
+125°C
DC61d
40
50
μA
-40°C
DC61a
40
50
μA
+25°C
DC61b
40
50
μA
+85°C
DC61c
80
90
μA
+125°C
Note 1:
2:
3:
4:
3.3V
Base Power-Down Current
3.3V
Watchdog Timer Current: ΔIWDT(3)
Data in the Typical column is at 3.3V, +25°C unless otherwise stated.
Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and
pulled to VSS. WDT, etc., are all switched off, and VREGS (RCON<8>) = 1.
The Δ current is the additional current consumed when the WDT module is enabled. This current should
be added to the base IPD current.
These currents are measured on the device containing the most memory in this family.
TABLE 24-8:
DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
DC CHARACTERISTICS
Parameter No.
Typical(1)
Max
Doze
Ratio
Units
DC73a
86
105
1:2
mA
DC73f
86
105
1:64
mA
DC73g
86
105
1:128
mA
DC70a
86
105
1:2
mA
DC70f
86
105
1:64
mA
DC70g
86
105
1:128
mA
DC71a
86
105
1:2
mA
DC71f
86
105
1:64
mA
DC71g
86
105
1:128
mA
DC72a
86
105
1:2
mA
DC72f
86
105
1:64
mA
DC72g
86
105
1:128
mA
Note 1:
Conditions
-40°C
3.3V
40 MIPS
+25°C
3.3V
40 MIPS
+85°C
3.3V
40 MIPS
+125°C
3.3V
40 MIPS
Data in the Typical column is at 3.3V, +25°C unless otherwise stated.
DS70318D-page 288
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-9:
DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for
Extended
DC CHARACTERISTICS
Param
Symbol
No.
VIL
Characteristic
Min
Typ(1)
Max
Units
Conditions
Input Low Voltage
DI10
I/O Pins
VSS
—
0.2 VDD
V
DI15
MCLR
VSS
—
0.2 VDD
V
DI16
I/O Pins with OSC1
VSS
—
0.2 VDD
V
DI18
I/O Pins with SDAx, SCLx
VSS
—
0.3 VDD
V
SMbus disabled
DI19
I/O Pins with SDAx, SCLx
VSS
—
0.2 VDD
V
SMbus enabled
0.7 VDD
0.7 VDD
—
—
VDD
5.5
V
V
—
250
—
μA
VDD = 3.3V, VPIN = VSS
I/O Pins with:
4 mA Source/Sink Capability
—
±2
—
μA
8 mA Source/Sink Capability
—
±4
—
μA
16 mA Source/Sink Capability
—
±8
—
μA
VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
VIH
Input High Voltage
I/O Pins Not 5V Tolerant(4)
I/O Pins 5V Tolerant(4)
DI20
DI21
ICNPU
CNx Pull-up Current
IIL
Input Leakage Current(2,3,4)
DI30
DI50
DI55
MCLR
—
—
±2
μA
VSS ≤ VPIN ≤ VDD
DI56
OSC1
—
—
±2
μA
VSS ≤ VPIN ≤ VDD,
XT and HS modes
—
16
—
mA
—
8
—
mA
—
4
—
mA
ISINK
Note 1:
2:
3:
4:
Sink Current
Pins:
RA3, RA4, RB3, RB4, RB11-RB14
Pins:
RC3-RC8, RC11-RC13
Pins:
RA0-RA2, RB0, RB1, RB5-RB10,
RB15, RC1, RC2, RC9, RC10
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
Negative current is defined as current sourced by the pin.
See “Pin Diagrams” for the list of 5V tolerant I/O pins.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 289
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-10: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
DC CHARACTERISTICS
Param
Symbol
No.
DO10
VOL
DO16
DO20
VOH
DO26
Characteristic
Min
Typ
Max
Units
Conditions
I/O Ports:
4 mA Source/Sink Capability
8 mA Source/Sink Capability
16 mA Source/Sink Capability
—
—
—
0.4
0.4
0.4
—
—
—
V
V
V
IOL = 4 mA, VDD = 3.3V
IOL = 8 mA, VDD = 3.3V
IOL = 16 mA, VDD = 3.3V
OSC2/CLKO
—
0.4
—
V
IOL = 2 mA, VDD = 3.3V
I/O Ports:
4 mA Source/Sink Capability
8 mA Source/Sink Capability
16 mA Source/Sink Capability
—
—
—
2.40
2.40
2.40
—
—
—
V
V
V
IOH = -4 mA, VDD = 3.3V
IOH = -8 mA, VDD = 3.3V
IOH = -16 mA, VDD = 3.3V
OSC2/CLKO
—
2.41
—
V
IOH = -1.3 mA, VDD = 3.3V
—
16
—
mA
—
8
—
mA
—
4
—
mA
Output Low Voltage
Output High Voltage
ISOURCE Source Current
Pins:
RA3, RA4, RB3, RB4, RB11-RB14
Pins:
RC3-RC8, RC11-RC13
Pins:
RA0-RA2, RB0, RB1, RB5RB10, RB15, RC1, RC2, RC9,
RC10
TABLE 24-11: ELECTRICAL CHARACTERISTICS: BOR
DC CHARACTERISTICS
Param
No.
Symbol
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Characteristic
Min(1)
Typ
Max
Units
2.55
—
2.79
V
BO10
VBOR
Note 1:
Parameters are for design guidance only and are not tested in manufacturing.
DS70318D-page 290
BOR Event on VDD Transition
High-to-Low
BOR Event is Tied to VDD Core
Voltage Decrease
Preliminary
Conditions
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-12: DC CHARACTERISTICS: PROGRAM MEMORY
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
DC CHARACTERISTICS
Param
Symbol
No.
Characteristic
Min
Typ(1)
Max
Units
Conditions
Program Flash Memory
D130
EP
Cell Endurance
10,000
—
—
D131
VPR
VDD for Read
VMIN
—
3.6
V
VMIN = Minimum operating
voltage
D132B
VPEW
VDD for Self-Timed Write
VMIN
—
3.6
V
VMIN = Minimum operating
voltage
D134
TRETD
Characteristic Retention
20
—
—
Year Provided no other specifications
are violated, -40°C to +125°C
D135
IDDP
Supply Current during
Programming
—
10
—
mA
D136a
TRW
Row Write Time
1.32
—
1.74
ms
TRW = 11064 FRC cycles,
TA = +85°C, See Note 2
D136b
TRW
Row Write Time
1.28
—
1.79
ms
TRW = 11064 FRC cycles,
TA = +125°C, See Note 2
D137a
TPE
Page Erase Time
20.1
—
26.5
ms
TPE = 168517 FRC cycles,
TA = +85°C, See Note 2
D137b
TPE
Page Erase Time
19.5
—
27.3
ms
TPE = 168517 FRC cycles,
TA = +125°C, See Note 2
D138a
TWW
Word Write Cycle Time
42.3
—
55.9
μs
TWW = 355 FRC cycles,
TA = +85°C, See Note 2
D138b
TWW
Word Write Cycle Time
41.1
—
57.6
μs
TWW = 355 FRC cycles,
TA = +125°C, See Note 2
Note 1:
2:
E/W -40°C to +125°C
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
Other conditions: FRC = 7.37 MHz, TUN<5:0> = b'011111 (for Min), TUN<5:0> = b'100000 (for Max).
This parameter depends on the FRC accuracy (see Table 24-20) and the value of the FRC Oscillator Tuning register (see Register 9-4). For complete details on calculating the Minimum and Maximum time see
Section 5.3 “Programming Operations”.
TABLE 24-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
Operating Conditions:
Param
No.
Symbol
CEFC
-40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Characteristics
External Filter Capacitor
Value
© 2009 Microchip Technology Inc.
Min
Typ
Max
Units
4.7
10
—
μF
Preliminary
Comments
Capacitor must be low
series resistance
(< 5 ohms)
DS70318D-page 291
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
24.2
AC Characteristics and Timing Parameters
This section defines dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 AC characteristics and timing parameters.
TABLE 24-14: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Operating voltage VDD range as described in Section 24.0 “Electrical
Characteristics”.
AC CHARACTERISTICS
FIGURE 24-1:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSC2
Load Condition 2 – for OSC2
VDD/2
CL
Pin
RL
VSS
CL
Pin
RL = 464Ω
CL = 50 pF for all pins except OSC2
15 pF for OSC2 output
VSS
TABLE 24-15: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
Param
Symbol
No.
Characteristic
Min
Typ
Max
Units
Conditions
15
pF
In XT and HS modes when
external clock is used to drive
OSC1
DO50
COSCO
OSC2 Pin
—
—
DO56
CIO
All I/O Pins and OSC2
—
—
50
pF
EC mode
DO58
CB
SCLx, SDAx
—
—
400
pF
In I2C™ mode
DS70318D-page 292
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-2:
EXTERNAL CLOCK TIMING
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
OSC1
OS20
OS30
OS25
OS30
OS31
OS31
CLKO
OS41
OS40
TABLE 24-16: EXTERNAL CLOCK TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
OS10
Symb
FIN
Min
Typ(1)
Max
Units
External CLKI Frequency
(External clocks allowed only
in EC and ECPLL modes)
DC
—
40
MHz
EC
Oscillator Crystal Frequency
3.5
10
—
—
10
40
MHz
MHz
XT
HS
Characteristic
Conditions
OS20
TOSC
TOSC = 1/FOSC
12.5
—
DC
ns
OS25
TCY
Instruction Cycle Time(2)
25
—
DC
ns
OS30
TosL,
TosH
External Clock in (OSC1)
High or Low Time
0.375 x TOSC
—
0.625 x TOSC
ns
EC
OS31
TosR,
TosF
External Clock in (OSC1)
Rise or Fall Time
—
—
20
ns
EC
OS40
TckR
CLKO Rise Time(3)
—
5.2
—
ns
OS41
TckF
CLKO Fall Time(3)
—
5.2
—
ns
OS42
GM
External Oscillator
Transconductance(4)
14
16
18
mA/V
Note 1:
2:
3:
4:
VDD = 3.3V
TA = +25ºC
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
Instruction cycle period (TCY) equals two times the input oscillator time-base period. All specified values
are based on characterization data for that particular oscillator type under standard operating conditions
with the device executing code. Exceeding these specified limits may result in an unstable oscillator
operation and/or higher than expected current consumption. All devices are tested to operate at “min.”
values with an external clock applied to the OSC1/CLKI pin. When an external clock input is used, the
“max.” cycle time limit is “DC” (no clock) for all devices.
Measurements are taken in EC mode. The CLKO signal is measured on the OSC2 pin.
Data for this parameter is Preliminary. This parameter is characterized, but not tested in manufacturing.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 293
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-17: PLL CLOCK TIMING SPECIFICATIONS (VDD = 3.0V TO 3.6V)
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise
stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic
Min
Typ(1)
Max
Units
OS50
FPLLI
PLL Voltage Controlled
Oscillator (VCO) Input
Frequency Range
0.8
—
8
MHz
OS51
FSYS
On-Chip VCO System
Frequency
100
—
200
MHz
OS52
TLOCK
PLL Start-up Time (Lock Time)
0.9
1.5
3.1
mS
OS53
DCLK
CLKO Stability (Jitter)
-3
0.5
3
%
Note 1:
Conditions
ECPLL, XTPLL modes
Measured over 100 ms
period
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only
and are not tested in manufacturing.
TABLE 24-18: AUXILIARY PLL CLOCK TIMING SPECIFICATIONS (VDD = 3.0V TO 3.6V)
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise
stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Note 1:
Symbol
Characteristic
Min
Typ(1)
Max
Units
FHPOUT
0n-Chip 16x PLL CCO
Frequency
105
120
135
MHz
FHPIN
On-Chip 16x PLL Phase
Detector Input Frequency
6.56
7.5
8.44
MHz
TSU
Frequency Generator Lock
Time
—
—
10
μs
Conditions
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only
and are not tested in manufacturing.
TABLE 24-19: AC CHARACTERISTICS: INTERNAL RC ACCURACY
AC CHARACTERISTICS
Param
No.
Characteristic
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature
-40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for Extended
Min
Typ
Max
Units
Conditions
Internal FRC Accuracy @ FRC Frequency = 7.37 MHz(1,2)
F20
Note 1:
2:
FRC
—
±2
—
%
-40°C ≤ TA ≤ +85°C
VDD = 3.0-3.6V
FRC
—
±5
—
%
-40°C ≤ TA ≤ +125°C
VDD = 3.0-3.6V
Frequency calibrated at +25°C and 3.3V. TUN bits can be used to compensate for temperature drift.
FRC is set to initial frequency of 7.37 MHz (±2%) at +25°C.
DS70318D-page 294
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-20: INTERNAL RC ACCURACY
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Characteristic
Min
Typ
Max
Units
Conditions
LPRC
-20
±6
+20
%
-40°C ≤ TA ≤ +85°C
VDD = 3.0-3.6V
LPRC
-70
—
+70
%
-40°C ≤ TA ≤ +125°C
VDD = 3.0-3.6V
LPRC @ 32.768 kHz(1)
F21
Note 1:
Change of LPRC frequency as VDD changes.
FIGURE 24-3:
I/O TIMING CHARACTERISTICS
I/O Pin
(Input)
DI35
DI40
I/O Pin
(Output)
New Value
Old Value
DO31
DO32
Note: Refer to Figure 24-1 for load conditions.
TABLE 24-21: I/O TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic
Min
Typ(1)
Max
Units
Conditions
DO31
TIOR
Port Output Rise Time
—
10
25
ns
Refer to Figure 24-1
for test conditions
DO32
TIOF
Port Output Fall Time
—
10
25
ns
Refer to Figure 24-1
for test conditions
DI35
TINP
INTx Pin High or Low Time (output)
20
—
—
ns
DI40
TRBP
CNx High or Low Time (input)
2
—
—
TCY
Note 1:
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 295
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-4:
VDD
RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP
TIMER TIMING CHARACTERISTICS
SY12
MCLR
SY10
Internal
POR
PWRT
Time-out
OSC
Time-out
SY11
SY30
Internal
Reset
Watchdog
Timer
Reset
SY13
SY20
SY13
I/O Pins
SY35
FSCM
Delay
Note: Refer to Figure 24-1 for load conditions.
DS70318D-page 296
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-22: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER
TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
Symbol
No.
Characteristic(1)
Min
Typ(2)
Max
Units
Conditions
SY10
TMCL
MCLR Pulse Width (low)
2
—
—
μs
-40°C to +85°C
SY11
TPWRT
Power-up Timer Period
—
2
4
8
16
32
64
128
—
ms
-40°C to +85°C
User programmable
SY12
TPOR
Power-on Reset Delay
3
10
30
μs
-40°C to +85°C
SY13
TIOZ
I/O High-Impedance from MCLR
Low or Watchdog Timer Reset
0.68
0.72
1.2
μs
SY20
TWDT1
Watchdog Timer Time-out Period
—
—
—
ms
See Section 21.4 “Watchdog Timer (WDT)” and
LPRC parameter F21
(Table 24-20).
SY30
TOST
Oscillator Start-up Time
—
1024
TOSC
—
—
TOSC = OSC1 period
Note 1:
2:
These parameters are characterized but not tested in manufacturing.
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 297
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-5:
TIMER1, 2 AND 3 EXTERNAL CLOCK TIMING CHARACTERISTICS
TxCK
Tx11
Tx10
Tx15
OS60
Tx20
TMRx
Note: Refer to Figure 24-1 for load conditions.
TABLE 24-23: TIMER1 EXTERNAL CLOCK TIMING REQUIREMENTS(1)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
TA10
TA11
Symbol
TTXH
TTXL
Characteristic
TxCK High Time
TxCK Low Time
Min
Typ
Max
Units
Conditions
Synchronous,
no prescaler
0.5 TCY + 20
—
—
ns
Must also meet
parameter TA15
Synchronous,
with prescaler
10
—
—
ns
Asynchronous
10
—
—
ns
Synchronous,
no prescaler
0.5 TCY + 20
—
—
ns
Synchronous,
with prescaler
10
—
—
ns
Asynchronous
TA15
TTXP
10
—
—
ns
TCY + 40
—
—
ns
Synchronous,
with prescaler
Greater of:
20 ns or
(TCY + 40)/N
—
—
—
Asynchronous
20
—
—
ns
DC
—
50
kHz
1.5 TCY
—
TxCK Input Period Synchronous,
no prescaler
OS60
Ft1
TA20
TCKEXTMRL Delay from External TxCK Clock
Edge to Timer Increment
Note 1:
T1CK Oscillator Input Frequency
Range (oscillator enabled by setting
bit, TCS (T1CON<1>))
0.5 TCY
Must also meet
parameter TA15
N = prescale
value
(1, 8, 64, 256)
Timer1 is a Type A.
DS70318D-page 298
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-24: TIMER2 EXTERNAL CLOCK TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
TB10
TB11
TB15
TB20
Symbol
TTXH
TTXL
TTXP
Characteristic
TxCK High Time
TxCK Low Time
TxCK Input
Period
Min
Typ
Max
Units
Conditions
Synchronous,
no prescaler
0.5 TCY + 20
—
—
ns
Must also meet
parameter TB15
Synchronous,
with prescaler
10
—
—
ns
Synchronous,
no prescaler
0.5 TCY + 20
—
—
ns
Synchronous,
with prescaler
10
—
—
ns
Synchronous,
no prescaler
TCY + 40
—
—
ns
Synchronous,
with prescaler
Greater of:
20 ns or
(TCY + 40)/N
—
1.5 TCY
—
TCKEXTMRL Delay from External TxCK Clock
Edge to Timer Increment
0.5 TCY
Must also meet
parameter TB15
N = prescale
value
(1, 8, 64, 256)
TABLE 24-25: TIMER3 EXTERNAL CLOCK TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic
Min
Typ
Max
Units
Conditions
TC10
TTXH
TxCK High Time
Synchronous
0.5 TCY + 20
—
—
ns
Must also meet
parameter TC15
TC11
TTXL
TxCK Low Time
Synchronous
0.5 TCY + 20
—
—
ns
Must also meet
parameter TC15
TC15
TTXP
TxCK Input Period Synchronous,
no prescaler
TCY + 40
—
—
ns
N = prescale
value
(1, 8, 64, 256)
—
1.5
TCY
—
Synchronous,
with prescaler
TC20
TCKEXTMRL Delay from External TxCK Clock
Edge to Timer Increment
© 2009 Microchip Technology Inc.
Greater of:
20 ns or
(TCY + 40)/N
0.5 TCY
Preliminary
DS70318D-page 299
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-6:
INPUT CAPTURE (CAPx) TIMING CHARACTERISTICS
ICx
IC10
IC11
IC15
Note: Refer to Figure 24-1 for load conditions.
TABLE 24-26: INPUT CAPTURE TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
IC10
TccL
ICx Input Low Time
IC11
TccH
ICx Input High Time
IC15
TccP
ICx Input Period
Characteristic(1)
No prescaler
Min
Max
Units
0.5 TCY + 20
—
ns
With prescaler
No prescaler
10
—
ns
0.5 TCY + 20
—
ns
10
—
ns
(TCY + 40)/N
—
ns
With prescaler
Note 1:
Conditions
N = prescale
value (1, 4, 16)
These parameters are characterized but not tested in manufacturing.
FIGURE 24-7:
OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
OCx
(Output Compare
or PWM Mode)
OC10
OC11
Note: Refer to Figure 24-1 for load conditions.
TABLE 24-27: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Param
Symbol
No.
Characteristic(1)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Min
Typ
Max
Units
Conditions
OC10
TccF
OCx Output Fall Time
—
—
—
ns
See parameter D032
OC11
TccR
OCx Output Rise Time
—
—
—
ns
See parameter D031
Note 1:
These parameters are characterized but not tested in manufacturing.
DS70318D-page 300
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-8:
OC/PWM MODULE TIMING CHARACTERISTICS
OC20
OCFA
OC15
OCx
TABLE 24-28: SIMPLE OC/PWM MODE TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic(1)
Min
Typ
Max
Units
OC15
TFD
Fault Input to PWM I/O
Change
—
—
50
ns
OC20
TFLT
Fault Input Pulse Width
50
—
—
ns
Note 1:
These parameters are characterized but not tested in manufacturing.
© 2009 Microchip Technology Inc.
Preliminary
Conditions
DS70318D-page 301
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-9:
HIGH-SPEED PWM MODULE FAULT TIMING CHARACTERISTICS
MP30
FLTx
MP20
PWMx
FIGURE 24-10:
HIGH-SPEED PWM MODULE TIMING CHARACTERISTICS
MP11 MP10
PWMx
Note: Refer to Figure 24-1 for load conditions.
TABLE 24-29: HIGH-SPEED PWM MODULE TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic(1)
Min
Typ
Max
Units
—
ns
See parameter D032
See parameter D031
MP10
TFPWM
PWM Output Fall Time
—
2.5
MP11
TRPWM
PWM Output Rise Time
—
2.5
—
ns
TFD
Fault Input ↓ to PWM
I/O Change
—
—
15
ns
MP20
MP30
Note 1:
TFH
Minimum Pulse Width
—
8
—
ns
TPDLY
Tap Delay
—
1.04
—
ns
ACLK
PWM Input Clock
—
—
120
MHz
Conditions
ACLK = 120 MHz
These parameters are characterized but not tested in manufacturing.
DS70318D-page 302
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-11:
SPIx MODULE MASTER MODE (CKE = 0) TIMING CHARACTERISTICS
SCKx
(CKP = 0)
SP11
SP10
SP21
SP20
SP20
SP21
SCKx
(CKP = 1)
SP35
Bit 14 - - - - - -1
MSb
SDOx
SP31
SDIx
LSb
SP30
MSb In
LSb In
Bit 14 - - - -1
SP40 SP41
Note: Refer to Figure 24-1 for load conditions.
TABLE 24-30: SPIx MASTER MODE (CKE = 0) TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic(1)
Min
Typ(2)
Max
Units
Conditions
SP10
TscL
SCKx Output Low Time
TCY/2
—
—
ns
See Note 3
SP11
TscH
SCKx Output High Time
TCY/2
—
—
ns
See Note 3
SP20
TscF
SCKx Output Fall Time
—
—
—
ns
See parameter D032
and Note 4
SP21
TscR
SCKx Output Rise Time
—
—
—
ns
See parameter D031
and Note 4
SP30
TdoF
SDOx Data Output Fall Time
—
—
—
ns
See parameter D032
and Note 4
SP31
TdoR
SDOx Data Output Rise Time
—
—
—
ns
See parameter D031
and Note 4
SP35
TscH2doV,
TscL2doV
SDOx Data Output Valid after
SCKx Edge
—
6
20
ns
SP40
TdiV2scH,
TdiV2scL
Setup Time of SDIx Data Input
to SCKx Edge
23
—
—
ns
SP41
TscH2diL,
TscL2diL
Hold Time of SDIx Data Input
to SCKx Edge
30
—
—
ns
Note 1:
2:
3:
4:
These parameters are characterized but not tested in manufacturing.
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
The minimum clock period for SCKx is 100 ns. Therefore, the clock generated in Master mode must not
violate this specification.
Assumes 50 pF load on all SPIx pins.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 303
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-12:
SPIx MODULE MASTER MODE (CKE = 1) TIMING CHARACTERISTICS
SP36
SCKX
(CKP = 0)
SP11
SCKX
(CKP = 1)
SP10
SP21
SP20
SP20
SP21
SP35
SP40
SDIX
LSb
Bit 14 - - - - - -1
MSb
SDOX
SP30,SP31
MSb In
Bit 14 - - - -1
LSb In
SP41
Note: Refer to Figure 24-1 for load conditions.
TABLE 24-31: SPIx MODULE MASTER MODE (CKE = 1) TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic(1)
Min
Typ(2)
Max
Units
Conditions
SP10
TscL
SCKx Output Low Time
TCY/2
—
—
ns
See Note 3
SP11
TscH
SCKx Output High Time
TCY/2
—
—
ns
See Note 3
SP20
TscF
SCKx Output Fall Time
—
—
—
ns
See parameter D032
and Note 4
SP21
TscR
SCKx Output Rise Time
—
—
—
ns
See parameter D031
and Note 4
SP30
TdoF
SDOx Data Output Fall Time
—
—
—
ns
See parameter D032
and Note 4
SP31
TdoR
SDOx Data Output Rise Time
—
—
—
ns
See parameter D031
and Note 4
SP35
TscH2doV,
TscL2doV
SDOx Data Output Valid after
SCKx Edge
—
6
20
ns
SP36
TdoV2sc,
TdoV2scL
SDOx Data Output Setup to
First SCKx Edge
30
—
—
ns
SP40
TdiV2scH,
TdiV2scL
Setup Time of SDIx Data
Input to SCKx Edge
23
—
—
ns
SP41
TscH2diL,
TscL2diL
Hold Time of SDIx Data Input
to SCKx Edge
30
—
—
ns
Note 1:
2:
3:
4:
These parameters are characterized but not tested in manufacturing.
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
The minimum clock period for SCKx is 100 ns. The clock generated in Master mode must not violate this
specification.
Assumes 50 pF load on all SPIx pins.
DS70318D-page 304
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-13:
SPIx MODULE SLAVE MODE (CKE = 0) TIMING CHARACTERISTICS
SSX
SP52
SP50
SCKX
(CKP = 0)
SP71
SP70
SP73
SP72
SP72
SP73
SCKX
(CKP = 1)
SP35
MSb
SDOX
LSb
Bit 14 - - - - - -1
SP51
SP30,SP31
SDIX
Bit 14 - - - -1
MSb In
LSb In
SP41
SP40
Note: Refer to Figure 24-1 for load conditions.
TABLE 24-32: SPIx MODULE SLAVE MODE (CKE = 0) TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic(1)
Min
Typ(2)
Max
Units
SP70
SP71
SP72
SP73
SP30
TscL
TscH
TscF
TscR
TdoF
SCKx Input Low Time
SCKx Input High Time
SCKx Input Fall Time
SCKx Input Rise Time
SDOx Data Output Fall Time
30
30
—
—
—
—
—
10
10
—
—
—
25
25
—
ns
ns
ns
ns
ns
SP31
TdoR
SDOx Data Output Rise Time
—
—
—
ns
SP35
TscH2doV,
TscL2doV
TdiV2scH,
TdiV2scL
TscH2diL,
TscL2diL
SDOx Data Output Valid after
SCKx Edge
Setup Time of SDIx Data Input
to SCKx Edge
Hold Time of SDIx Data Input to
SCKx Edge
—
—
30
ns
20
—
—
ns
20
—
—
ns
SP50
TssL2scH,
TssL2scL
SSx ↓ to SCKx ↑ or SCKx Input
120
—
—
ns
SP51
TssH2doZ
SSx ↑ to SDOx Output
High-Impedance
10
—
50
ns
TscH2ssH SSx after SCKx Edge
1.5 TCY +40
—
—
TscL2ssH
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
3: Assumes 50 pF load on all SPIx pins.
ns
SP40
SP41
SP52
© 2009 Microchip Technology Inc.
Preliminary
Conditions
See Note 3
See Note 3
See parameter D032
and Note 3
See parameter D031
and Note 3
See Note 3
DS70318D-page 305
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-14:
SPIx MODULE SLAVE MODE (CKE = 1) TIMING CHARACTERISTICS
SP60
SSx
SP52
SP50
SCKx
(CKP = 0)
SP71
SP70
SP73
SP72
SP72
SP73
SCKx
(CKP = 1)
SP35
SP52
MSb
SDOx
Bit 14 - - - - - -1
LSb
SP30,SP31
SDIx
SDI
MSb In
SP51
Bit 14 - - - -1
LSb In
SP41
SP40
Note: Refer to Figure 24-1 for load conditions.
DS70318D-page 306
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-33: SPIx MODULE SLAVE MODE (CKE = 1) TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic(1)
Min
Typ(2)
Max
Units
—
—
ns
Conditions
SP70
TscL
SCKx Input Low Time
30
SP71
TscH
SCKx Input High Time
30
—
—
ns
SP72
TscF
SCKx Input Fall Time
—
10
25
ns
See Note 3
SP73
TscR
SCKx Input Rise Time
—
10
25
ns
See Note 3
SP30
TdoF
SDOx Data Output Fall Time
—
—
—
ns
See parameter
D032 and Note 3
SP31
TdoR
SDOx Data Output Rise Time
—
—
—
ns
See parameter
D031 and Note 3
SP35
TscH2doV, SDOx Data Output Valid after
TscL2doV SCKx Edge
—
—
30
ns
SP40
TdiV2scH,
TdiV2scL
Setup Time of SDIx Data Input
to SCKx Edge
20
—
—
ns
SP41
TscH2diL,
TscL2diL
Hold Time of SDIx Data Input
to SCKx Edge
20
—
—
ns
SP50
TssL2scH,
TssL2scL
SSx ↓ to SCKx ↓ or SCKx ↑
Input
120
—
—
ns
SP51
TssH2doZ
SSx ↑ to SDOX Output
High-Impedance
10
—
50
ns
SP52
TscH2ssH
TscL2ssH
SSx ↑ after SCKx Edge
1.5 TCY + 40
—
—
ns
SP60
TssL2doV
SDOx Data Output Valid after
SSx Edge
—
—
50
ns
Note 1:
2:
3:
4:
See Note 4
These parameters are characterized but not tested in manufacturing.
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
The minimum clock period for SCKx is 100 ns. The clock generated in Master mode must not violate this
specification.
Assumes 50 pF load on all SPIx pins.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 307
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-15:
I2Cx BUS START/STOP BITS TIMING CHARACTERISTICS (MASTER MODE)
SCLx
IM31
IM34
IM30
IM33
SDAx
Stop
Condition
Start
Condition
Note: Refer to Figure 24-1 for load conditions.
FIGURE 24-16:
I2Cx BUS DATA TIMING CHARACTERISTICS (MASTER MODE)
IM20
IM21
IM11
IM10
SCLx
IM11
IM26
IM10
IM25
IM33
SDAx
In
IM40
IM40
IM45
SDAx
Out
Note: Refer to Figure 24-1 for load conditions.
DS70318D-page 308
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-34: I2Cx BUS DATA TIMING REQUIREMENTS (MASTER MODE)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
Symbol
No.
IM10
Min(1)
Max
Units
TLO:SCL Clock Low Time 100 kHz mode
TCY/2 (BRG + 1)
—
μs
400 kHz mode
TCY/2 (BRG + 1)
—
μs
(2)
TCY/2 (BRG + 1)
—
μs
Clock High Time 100 kHz mode
TCY/2 (BRG + 1)
—
μs
400 kHz mode
TCY/2 (BRG + 1)
—
μs
1 MHz mode(2)
TCY/2 (BRG + 1)
—
μs
—
300
ns
20 + 0.1 CB
300
ns
Characteristic
1 MHz mode
IM11
THI:SCL
IM20
TF:SCL
IM21
TR:SCL
IM25
SDAx and SCLx 100 kHz mode
Fall Time
400 kHz mode
1 MHz mode(2)
—
100
ns
SDAx and SCLx 100 kHz mode
Rise Time
400 kHz mode
—
1000
ns
TSU:DAT Data Input
Setup Time
20 + 0.1 CB
300
ns
1 MHz mode(2)
—
300
ns
100 kHz mode
250
—
ns
400 kHz mode
100
—
ns
40
—
ns
0
—
μs
400 kHz mode
0
0.9
μs
1 MHz mode(2)
0.2
—
μs
100 kHz mode
TCY/2 (BRG + 1)
—
μs
400 kHz mode
TCY/2 (BRG + 1)
—
μs
1 MHz mode(2)
TCY/2 (BRG + 1)
—
μs
100 kHz mode
TCY/2 (BRG + 1)
—
μs
400 kHz mode
TCY/2 (BRG + 1)
—
μs
1 MHz mode(2)
TCY/2 (BRG + 1)
—
μs
100 kHz mode
TCY/2 (BRG + 1)
—
μs
400 kHz mode
TCY/2 (BRG + 1)
—
μs
mode(2)
TCY/2 (BRG + 1)
—
μs
100 kHz mode
TCY/2 (BRG + 1)
—
ns
400 kHz mode
TCY/2 (BRG + 1)
—
ns
1 MHz mode(2)
TCY/2 (BRG + 1)
—
ns
100 kHz mode
—
3500
ns
400 kHz mode
—
1000
ns
(2)
—
400
ns
100 kHz mode
4.7
—
μs
400 kHz mode
1.3
—
μs
1 MHz mode(2)
0.5
—
μs
—
400
pF
1 MHz mode
IM26
THD:DAT Data Input
Hold Time
IM30
TSU:STA
IM31
Start Condition
Setup Time
THD:STA Start Condition
Hold Time
TSU:STO Stop Condition
Setup Time
IM33
100 kHz mode
1 MHz
IM34
THD:STO Stop Condition
Hold Time
IM40
TAA:SCL
Output Valid
From Clock
1 MHz mode
IM45
TBF:SDA Bus Free Time
IM50
CB
Note 1:
2:
(2)
Bus Capacitive Loading
Conditions
CB is specified to be
from 10 pF to 400 pF
CB is specified to be
from 10 pF to 400 pF
Only relevant for
Repeated Start
condition
After this period the
first clock pulse is
generated
Time the bus must be
free before a new
transmission can start
BRG is the value of the I2C™ Baud Rate Generator. Refer to Section 19. “Inter-Integrated Circuit
(I2C™)” (DS70195) in the “dsPIC33F Family Reference Manual” available from the Microchip web site.
Maximum pin capacitance = 10 pF for all I2Cx pins (for 1 MHz mode only).
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 309
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-17:
I2Cx BUS START/STOP BITS TIMING CHARACTERISTICS (SLAVE MODE)
SCLx
IS34
IS31
IS30
IS33
SDAx
Stop
Condition
Start
Condition
FIGURE 24-18:
I2Cx BUS DATA TIMING CHARACTERISTICS (SLAVE MODE)
IS20
IS21
IS11
IS10
SCLx
IS30
IS26
IS31
IS25
IS33
SDAx
In
IS40
IS40
IS45
SDAx
Out
DS70318D-page 310
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-35: I2Cx BUS DATA TIMING REQUIREMENTS (SLAVE MODE)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param. Symbol
IS10
IS11
IS20
IS21
IS25
IS26
TLO:SCL
THI:SCL
TF:SCL
TR:SCL
TSU:DAT
Characteristic
Clock Low Time
Clock High Time
SDAx and SCLx
Fall Time
SDAx and SCLx
Rise Time
Data Input
Setup Time
THD:DAT Data Input
Hold Time
Min
Max
Units
100 kHz mode
4.7
—
μs
Device must operate at a
minimum of 1.5 MHz
400 kHz mode
1.3
—
μs
Device must operate at a
minimum of 10 MHz
1 MHz mode(1)
0.5
—
μs
100 kHz mode
4.0
—
μs
Device must operate at a
minimum of 1.5 MHz
400 kHz mode
0.6
—
μs
Device must operate at a
minimum of 10 MHz
1 MHz mode(1)
0.5
—
μs
100 kHz mode
—
300
ns
400 kHz mode
20 + 0.1 CB
300
ns
1 MHz mode(1)
—
100
ns
100 kHz mode
—
1000
ns
400 kHz mode
20 + 0.1 CB
300
ns
1 MHz mode(1)
—
300
ns
100 kHz mode
250
—
ns
400 kHz mode
100
—
ns
1 MHz mode(1)
100
—
ns
100 kHz mode
0
—
μs
400 kHz mode
0
0.9
μs
(1)
1 MHz mode
IS30
IS31
IS33
IS34
TSU:STA
Start Condition
Setup Time
THD:STA Start Condition
Hold Time
TSU:STO
Stop Condition
Setup Time
THD:STO Stop Condition
Hold Time
100 kHz mode
IS45
IS50
Note 1:
TAA:SCL
Output Valid
From Clock
TBF:SDA Bus Free Time
CB
0
0.3
μs
4.7
—
μs
400 kHz mode
0.6
—
μs
1 MHz mode(1)
0.25
—
μs
100 kHz mode
4.0
—
μs
400 kHz mode
0.6
—
μs
1 MHz mode(1)
0.25
—
μs
100 kHz mode
4.7
—
μs
400 kHz mode
0.6
—
μs
1 MHz mode(1)
0.6
—
μs
100 kHz mode
4000
—
ns
400 kHz mode
600
—
ns
(1)
250
1 MHz mode
IS40
Conditions
CB is specified to be from
10 pF to 400 pF
Only relevant for Repeated
Start condition
After this period, the first
clock pulse is generated
ns
100 kHz mode
0
3500
ns
400 kHz mode
0
1000
ns
1 MHz mode(1)
0
350
ns
100 kHz mode
4.7
—
μs
400 kHz mode
1.3
—
μs
1 MHz mode(1)
0.5
—
μs
—
400
pF
Bus Capacitive Loading
CB is specified to be from
10 pF to 400 pF
Time the bus must be free
before a new transmission
can start
Maximum pin capacitance = 10 pF for all I2Cx pins (for 1 MHz mode only).
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 311
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
=
TABLE 24-36: 10-BIT HIGH-SPEED A/D MODULE SPECIFICATIONS
Standard Operating Conditions: 3.0V and 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
No.
Symbol
Characteristic
Min.
Typ
Max.
Units
Conditions
Device Supply
AD01
AVDD
Module VDD Supply
—
—
—
—
See the VDD specification
(DC10) in Table 24-4
AD02
AVSS
Module VSS Supply
—
—
—
—
AVSS is connected to VSS
AD10
VINH-VINL Full-Scale Input Span
VDD
V
AD11
VIN
Absolute Input Voltage
AVDD
V
AD12
IAD
Operating Current
—
8
—
mA
AD13
—
Leakage Current
—
±0.6
—
μA
AD17
RIN
Recommended Impedance
Of Analog Voltage Source
—
100
Ω
AD20
Nr
Resolution
Analog Input
VSS
AVSS
VINL = AVSS = 0V,
AVDD = 3.3V
Source Impedance = 100Ω
DC Accuracy
10 data bits
bits
AD21A INL
Integral Nonlinearity
—
±0.5
<±2
LSb See Note 2
AD22A DNL
Differential Nonlinearity
—
±0.5
<±1
LSb See Note 2
AD23A GERR
Gain Error
—
±0.75
<±3.0
LSb See Note 2
AD24A EOFF
Offset Error
—
±2.0
<±5.0
LSb See Note 2
AD25
Monotonicity(1)
—
—
—
—
—
Guaranteed
Dynamic Performance
AD30
THD
Total Harmonic Distortion
—
-73
—
dB
AD31
SINAD
Signal to Noise and
Distortion
—
58
—
dB
AD32
SFDR
Spurious Free Dynamic
Range
—
-73
—
dB
AD33
FNYQ
Input Signal Bandwidth
—
—
0.5
MHz
AD34
ENOB
Effective Number of Bits
—
9.4
—
bits
Note 1:
2:
The A/D conversion result never decreases with an increase in the input voltage, and has no missing
codes.
This parameter is characterized under the following conditions: AVDD = 3.3V, 2.0 MSPS for dedicated S/H,
1.5 MSPS for shared S/H. This parameter is not tested in manufacturing.
DS70318D-page 312
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-37: 10-BIT HIGH-SPEED A/D MODULE TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
AC CHARACTERISTICS
Param
Symbol
No.
Characteristic
Min.
Typ(1)
Max.
Units
—
ns
Conditions
Clock Parameters
AD50b TAD
ADC Clock Period
AD55b tCONV
Conversion Time
AD56b FCNV
Throughput Rate
35.8
—
Conversion Rate
Devices with Single SAR
Devices with Dual SARs
—
14 TAD
—
—
—
—
2.0
Msps
—
—
4.0
Msps
10
μs
Timing Parameters
AD63b tDPU
Note 1:
Time to Stabilize Analog Stage
from ADC Off to ADC On(1)
1.0
—
These parameters are characterized but not tested in manufacturing.
FIGURE 24-19:
A/D CONVERSION TIMING PER INPUT
Tconv
Trigger Pulse
TAD
A/D Clock
A/D Data
ADBUFxx
9
Old Data
8
2
1
0
New Data
CONV
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 313
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-38: COMPARATOR AC AND DC SPECIFICATIONS
Standard Operating Conditions (unless otherwise stated)
Operating temperature: -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param.
Symbol Characteristic
No.
Note 1:
Min
Typ
Max
Units
VIOFF
Input Offset Voltage
±5
±15
mV
VICM
Input Common Mode
Voltage Range(1)
0
—
AVDD – 1.5
V
VGAIN
Open Loop Gain(1)
90
—
—
db
CMRR
Common Mode
Rejection Ratio(1)
70
—
—
db
TRESP
Large Signal Response
20
30
ns
Comments
V+ input step of 100 mv while
V- input held at AVDD/2. Delay
measured from analog input pin to
PWM output pin.
Parameters are for design guidance only and are not tested in manufacturing.
TABLE 24-39: DAC DC SPECIFICATIONS
Standard Operating Conditions (unless otherwise stated)
Operating temperature: -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param.
Symbol Characteristic
No.
CVRSRC External Reference Voltage(1)
Note 1:
CVRES
Resolution
INL
DNL
EOFF
EG
Transfer Function Accuracy
Integral Nonlinearity Error
Differential Nonlinearity Error
Offset Error
Gain Error
Min
Typ
0
Max
Units
AVDD – 1.6
V
10
—
—
—
—
±1.0
±0.8
±2.0
±2.0
Comments
Bits
—
—
—
—
LSB
LSB
LSB
LSB
AVDD = 3.3V,
DACREF = (AVDD/2)V
Parameters are for design guidance only and are not tested in manufacturing.
TABLE 24-40: DAC AC SPECIFICATIONS
Standard Operating Conditions (unless otherwise stated)
Operating temperature: -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param.
No.
Symbol Characteristic
TSET
Note 1:
Min
Typ
Settling Time(1)
Max
Units
650
nsec
Comments
Measured when range = 1
(high range), and
CMREF<9:0> transitions
from 0x1FF to 0x300.
Parameters are for design guidance only and are not tested in manufacturing.
DS70318D-page 314
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-41: DAC OUTPUT BUFFER DC SPECIFICATIONS
Standard Operating Conditions (unless otherwise stated)
Operating temperature: -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic
No.
RLOAD
Resistive Output Load
Impedance
CLOAD
Output Load Capacitance
IOUT
Output Current Drive
Strength
VRANGE
Full Output Drive Strength
Voltage Range
VLRANGE Output Drive Voltage
Range at Reduced
Current Drive of 50 μA
Min
Typ
Max
Units
3K
—
—
Ω
—
20
35
pF
200
300
400
μA
AVSS + 250
mV
—
AVDD – 900
mV
V
AVSS + 50 mV
—
AVDD – 500
mV
V
Comments
Sink and source
IDD
Current Consumed when
Module is Enabled,
High-Power Mode
—
—
1.3 x IOUT
μA
RIN
Input Impedance
109
—
—
Ω
ROUTON Output Impedance when
Module is Enabled
—
—
10
Ω
Closed loop output
resistance
ROUT-
107
—
—
Ω
buf_enable = 0
OFF
Output Impedance when
Module is Disabled
© 2009 Microchip Technology Inc.
Preliminary
Module will always
consume this current
even if no load is
connected to the
output
DS70318D-page 315
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 316
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
25.0
PACKAGING INFORMATION
18-Lead SOIC (.300”)
Example
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
dsPIC33FJ06
GS101-I/SO
YYWWNNN
0830235
28-Lead SOIC
e3
Example
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXX
YYWWNNN
28-Lead SPDIP
dsPIC33FJ06GS
202-E/SO e3
0830235
Example
dsPIC33FJ06GS
202-E/SP e3
0830235
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
YYWWNNN
Legend: XX...X
Y
YY
WW
NNN
e3
*
Note:
Customer-specific information
Year code (last digit of calendar year)
Year code (last 2 digits of calendar year)
Week code (week of January 1 is week ‘01’)
Alphanumeric traceability code
Pb-free JEDEC designator for Matte Tin (Sn)
This package is Pb-free. The Pb-free JEDEC designator ( e3 )
can be found on the outer packaging for this package.
If the full Microchip part number cannot be marked on one line, it is carried over to the next
line, thus limiting the number of available characters for customer-specific information.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 317
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
25.1
Package Marking Information (Continued)
28-Lead QFN-S
Example
XXXXXXXX
XXXXXXXX
YYWWNNN
33FJ06GS
202EMM e3
0830235
44-Lead QFN
Example
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
YYWWNNN
dsPIC33FJ16
GS504-E/ML e3
0830235
44-Lead TQFP
Example
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
YYWWNNN
DS70318D-page 318
dsPIC33FJ
16GS504
-E/PT e3
0830235
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
25.2
Package Details
% &
!"#$
3 ' ( "'# ' 4$ +") ""' 4 &' '$'
'' 255+++( (5 4
D
N
E
E1
NOTE 1
1
2 3
e
b
α
h
h
c
φ
A2
A
A1
β
L
L1
6'"
(" 7('"
8#(* & "
77. .
8
89
8
'
9! ; '
$$ 4
4""
'$ &&,
1-
<
<
/
<
<
<
9! >$'
.
$$ 4>$'
.
/1-
9! 7'
//1-
- (& ?
3
:
' @
'7'
7
3
' '
7
3
'
=/
1-
/
<
/
<
.3
A
<
A
<
7$>$'
*
<
/
$ &'
/A
<
/A
$ &'1 '' (
/A
<
7$
4""
/A
% &
!"#$%&'# (! )*#'(#"'* '$+' ' ' $ ,&'- ' "'
(" "$.$ '#$( $&" ' #" " $&" ' #" "" '%$/(( "$
(" $' .0/
1-2 1"(" '%'!#" ++' #'' "
.32 & (" )#"#+' #'' )& & (' # "" © 2009 Microchip Technology Inc.
Preliminary
+ -/1
DS70318D-page 319
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
'
% &
!"#$
3 ' ( "'# ' 4$ +") ""' 4 &' '$'
'' 255+++( (5 4
D
N
E
E1
NOTE 1
1 2 3
e
b
h
α
h
c
φ
A2
A
L
A1
L1
6'"
(" 7('"
8#(* & "
β
77. .
8
89
8
'
9! ; '
$$ 4
4""
'$ &&,
1-
<
<
/
<
<
<
9! >$'
.
$$ 4>$'
.
/1-
9! 7'
1-
- (& ?
:
' @
3
'7'
7
3
' '
7
3
'
=/
1-
/
<
/
<
.3
A
<
A
<
7$>$'
*
<
/
$ &'
/A
<
/A
$ &'1 '' (
/A
<
7$
4""
/A
% &
!"#$%&'# (! )*#'(#"'* '$+' ' ' $ ,&'- ' "'
(" "$.$ '#$( $&" ' #" " $&" ' #" "" '%$/(( "$
(" $' .0/
1-2 1"(" '%'!#" ++' #'' "
.32 & (" )#"#+' #'' )& & (' # "" DS70318D-page 320
Preliminary
+ -/1
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
' (
% &
) " * ! )" $
3 ' ( "'# ' 4$ +") ""' 4 &' '$'
'' 255+++( (5 4
N
NOTE 1
E1
1
2 3
D
E
A2
A
L
c
b1
A1
b
e
eB
6'"
(" 7('"
8#(* & "
8-;.
8
8
'
:
' ' 89
1-
<
<
/
/
1"' ' /
<
<
.
/
$$ 4
#$ ' 4""
#$ >$'
$$ 4>$'
.
/
/
9! 7'
/
=/
7
/
/
*
/
*
1
<
<
' ' 7$
6
4""
7$>$'
7 + 7$>$'
9! + ,
% &
!"#$%&'# (! )*#'(#"'* '$+' ' ' $ ,&'- ' "'
(" "$.$ '#$( $&" ' #" " $&" ' #" "" '%$B "$
(" $' .0/
1-2 1"(" '%'!#" ++' #'' "
© 2009 Microchip Technology Inc.
Preliminary
+ -1
DS70318D-page 321
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
' + , % (- .. /0/01 !+,%$
2 3 4 # - 3
% &
3 ' ( "'# ' 4$ +") ""' 4 &' '$'
'' 255+++( (5 4
D
D2
EXPOSED
PAD
e
E2
E
b
2
2
1
1
K
N
N
L
NOTE 1
TOP VIEW
BOTTOM VIEW
A
A3
A1
6'"
(" 7('"
8#(* & "
'
77. .
8
8
89
:
=/1-
9! ; '
'$ &&
/
- ''
4""
9! >$'
.
.%
.
"$ $>$'
9! 7'
.%
"$ $7'
.3
=1=/
=1-
=/
- ''>$'
*
- ''7'
7
/
- ''' .% "$ $
C
<
% &
!"#$%&'# (! )*#'(#"'* '$+' ' ' $ 4""+"#'$
(" $' .0/
1-2 1"(" '%'!#" ++' #'' "
.32 & (" )#"#+' #'' )& & (' # "" DS70318D-page 322
Preliminary
<
+ -1
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
' + , % (- .. /0/01 !+,%$
2 3 4 # - 3
% &
3 ' ( "'# ' 4$ +") ""' 4 &' '$'
'' 255+++( (5 4
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 323
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
44
% &
+ , % (- . 0 !+,%$
3 ' ( "'# ' 4$ +") ""' 4 &' '$'
'' 255+++( (5 4
D
D2
EXPOSED
PAD
e
E
E2
b
2
2
1
N
1
N
NOTE 1
TOP VIEW
K
L
BOTTOM VIEW
A
A3
A1
6'"
(" 7('"
8#(* & "
'
77. .
8
8
89
:
=/1-
9! ; '
'$ &&
/
- ''
4""
9! >$'
.
.%
.
"$ $>$'
9! 7'
.%
"$ $7'
.3
1=
=/
=
1-
=
=/
- ''>$'
*
/
- ''7'
7
/
- ''' .% "$ $
C
<
% &
!"#$%&'# (! )*#'(#"'* '$+' ' ' $ 4""+"#'$
(" $' .0/
1-2 1"(" '%'!#" ++' #'' "
.32 & (" )#"#+' #'' )& & (' # "" DS70318D-page 324
Preliminary
=
<
+ -1
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
44
% &
+ , % (- . 0 !+,%$
3 ' ( "'# ' 4$ +") ""' 4 &' '$'
'' 255+++( (5 4
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 325
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
44
% &
53 + , 6( 5 00 ' !5+, $
3 ' ( "'# ' 4$ +") ""' 4 &' '$'
'' 255+++( (5 4
D
D1
E
e
E1
N
b
NOTE 1
1 2 3
NOTE 2
α
A
c
φ
β
L
A1
6'"
(" 7('"
8#(* &7$"
A2
L1
77. .
8
8
89
:
7$ '
9! ; '
<
<
/
/
/
<
/
/
=
/
$$ 4
4""
'$ &&
3
'7'
7
3
' '
7
3
'
9! >$'
1
.3
I
A
/A
A
.
1-
9! 7'
1-
$$ 4>$'
.
1-
$$ 47'
1-
7$
<
7$>$'
4""
*
/
$ &'
D
A
A
A
$ &'1 '' (
E
A
A
A
% &
!"#$%&'# (! )*#'(#"'* '$+' ' ' $ - (& "' " ' D"E(! (" "$.$ '#$( $&" ' #" " $&" ' #" "" '%$/(( "$
(" $' .0/
1-2 1"(" '%'!#" ++' #'' "
.32 & (" )#"#+' #'' )& & (' # "" DS70318D-page 326
Preliminary
+ -=1
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
44
% &
53 + , 6( 5 00 ' !5+, $
3 ' ( "'# ' 4$ +") ""' 4 &' '$'
'' 255+++( (5 4
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 327
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 328
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
APPENDIX A:
REVISION HISTORY
Revision B (June 2008)
This revision includes minor typographical and
formatting changes throughout the data sheet text. In
addition, redundant information was removed that is
now available in the respective chapters of the
dsPIC33F Family Reference Manual, which can be
obtained
from
the
Microchip
website
(www.microchip.com).
Revision A (January 2008)
This is the initial revision of this document.
The major changes are referenced by their respective
section in the following table.
TABLE A-1:
MAJOR SECTION UPDATES
Section Name
Update Description
“High-Performance, 16-Bit Digital
Signal Controllers”
Moved location of Note 1 (RP# pin) references (see “Pin Diagrams”).
Section 3.0 “Memory Organization”
Updated CPU Core Register map SFR reset value for CORCON (see
Table 3-1).
Removed Interrupt Controller Register Map SFR IPC29 and updated reset
values for IPC0, IPC1, IPC14, IPC16, IPC23, IPC24, IPC27, and IPC28 (see
Table 3-5).
Removed Interrupt Controller Register Map SFR IPC24 and IPC29 and
updated reset values for IPC0, IPC1, IPC2, IPC14, IPC16, IPC23, IPC27,
and IPC28 (see Table 3-6).
Removed Interrupt Controller Register Map SFR IPC24 and updated reset
values for IPC1, IPC2, IPC4, IPC14, IPC16, IPC23, IPC24, IPC27, and
IPC28 (see Table 3-7).
Updated Interrupt Controller Register Map SFR reset values for IPC1,
IPC14, IPC16, IPC23, IPC24, IPC27, and IPC28 (see Table 3-8).
Updated Interrupt Controller Register Map SFR reset values for IPC1,
IPC14, IPC16, IPC23, IPC24, IPC25, IPC26, IPC27, IPC28, and IPC29 (see
Table 3-9).
Updated Interrupt Controller Register Map SFR reset values for IPC1, IPC4,
IPC14, IPC16, IPC23, IPC24, IPC25, IPC26, IPC27, IPC28, and IPC29 (see
Table 3-10).
Added SFR definitions for RPOR16 and RPOR17 (see Table 3-34,
Table 3-35, and Table 3-36).
Updated bit definitions for PORTA, PORTB, and PORTC SFRs (ODCA,
ODCB, and ODCC) (see Table 3-37, Table 3-38, Table 3-39, and
Table 3-40).
Updated bit definitions and reset value for System Control Register map
SFR CLKDIV (see Table 3-41).
Added device-specific information to title of PMD Register Map (see
Table 3-47).
Added device-specific PMD Register Maps (see Table 3-46, Table 3-45, and
Table 3-43).
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 329
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE A-1:
MAJOR SECTION UPDATES (CONTINUED)
Section Name
Section 7.0 “Oscillator
Configuration”
Update Description
Removed the first sentence of the third clock source item (External Clock) in
Section 7.1.1 “System Clock sources”
Updated the default bit values for DOZE and FRCDIV in the Clock Divisor
Register (see Register 7-2).
Section 8.0 “Power-Saving
Features”
Added the following six registers:
• “PMD1: Peripheral Module Disable Control Register 1”
• “PMD2: Peripheral Module Disable Control Register 2”
• “PMD3: Peripheral Module Disable Control Register 3”
• “PMD4: Peripheral Module Disable Control Register 4”
• “PMD6: Peripheral Module Disable Control Register 6”
• “PMD7: Peripheral Module Disable Control Register 7”
Section 9.0 “I/O Ports”
Added paragraph and Table 9-1 to Section 9.1.1 “Open-Drain
Configuration”, which provides details on I/O pins and their functionality.
Removed 9.1.2 “5V Tolerance”.
Updated MUX range and removed virtual pin details in Figure 9-2.
Updated PWM Input Name descriptions in Table 9-1.
Added Section 9.4.2.3 “Virtual Pins”.
Updated bit values in all Peripheral Pin Select Input Registers (see
Register 9-1 through Register 9-14).
Updated bit name information for Peripheral Pin Select Output Registers
RPOR16 and RPOR17 (see Register 9-30 and Register 9-31).
Added the following two registers:
• “RPOR16: Peripheral Pin Select Output Register 16”
• “RPOR17: Peripheral Pin Select Output Register 17”
Removed the following sections:
• 9.4.2 “Available Peripherals”
• 9.4.3.2 “Virtual Input Pins”
• 9.4.3.4 “Peripheral Mapping”
• 9.4.5 “Considerations for Peripheral Pin Selection” (and all subsections)
Section 14.0 “High-Speed PWM”
Added Note 1 (remappable pin reference) to Figure 14-1.
Added Note 2 (Duty Cycle resolution) to PWM Master Duty Cycle Register
(Register 14-5), PWM Generator Duty Cycle Register (Register 14-7), and
PWM Secondary Duty Cycle Register (Register 14-8).
Added Note 2 and Note 3 and updated bit information for CLSRC and
FLTSRC in the PWM Fault Current-Limit Control Register (Register 14-15).
Section 15.0 “Serial Peripheral
Interface (SPI)”
DS70318D-page 330
Removed the following sections, which are now available in the related
section of the dsPIC33F Family Reference Manual:
• 15.1 “Interrupts”
• 15.2 “Receive Operations”
• 15.3 “Transmit Operations”
• 15.4 “SPI Setup” (retained Figure 15-1: SPI Module Block Diagram)
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE A-1:
MAJOR SECTION UPDATES (CONTINUED)
Section Name
Section 16.0 “Inter-Integrated
Circuit (I2C™)”
Update Description
Removed the following sections, which are now available in the related
section of the dsPIC33F Family Reference Manual:
• 16.3 “I2C Interrupts”
• 16.4 “Baud Rate Generator” (retained Figure 16-1: I2C Block Diagram)
• 16.5 “I2C Module Addresses
• 16.6 “Slave Address Masking”
• 16.7 “IPMI Support”
• 16.8 “General Call Address Support”
• 16.9 “Automatic Clock Stretch”
• 16.10 “Software Controlled Clock Stretching (STREN = 1)”
• 16.11 “Slope Control”
• 16.12 “Clock Arbitration”
• 16.13 “Multi-Master Communication, Bus Collision, and Bus Arbitration
Section 17.0 “Universal
Removed the following sections, which are now available in the related
Asynchronous Receiver Transmitter section of the dsPIC33F Family Reference Manual:
(UART)”
• 17.1 “UART Baud Rate Generator”
• 17.2 “Transmitting in 8-bit Data Mode
• 17.3 “Transmitting in 9-bit Data Mode
• 17.4 “Break and Sync Transmit Sequence”
• 17.5 “Receiving in 8-bit or 9-bit Data Mode”
• 17.6 “Flow Control Using UxCTS and UxRTS Pins”
• 17.7 “Infrared Support”
Removed IrDA references and Note 1, and updated the bit and bit value
descriptions for UTXINV (UxSTA<14>) in the UARTx Status and Control
Register (see Register 17-2).
Section 18.0 “High-Speed 10-bit
Analog-to-Digital Converter (ADC)”
© 2009 Microchip Technology Inc.
Updated bit value information for A/D Control Register (see Register 18-1).
Updated TRGSRC6 bit value for Timer1 period match in the A/D Convert
Pair Control Register 3 (see Register 18-8).
Preliminary
DS70318D-page 331
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE A-1:
MAJOR SECTION UPDATES (CONTINUED)
Section Name
Section 23.0 “Electrical
Characteristics”
Update Description
Updated Typ values for Thermal Packaging Characteristics (Table 23-3).
Removed Typ value for DC Temperature and Voltage Specifications
parameter DC12 (Table 23-4).
Updated all Typ values and conditions for DC Characteristics: Operating
Current (IDD), updated last sentence in Note 2 (Table 23-5).
Updated all Typ values for DC Characteristics: Idle Current (IIDLE) (see
Table 23-6).
Updated all Typ values for DC Characteristics: Power Down Current (IPD)
(see Table 23-7).
Updated all Typ values for DC Characteristics: Doze Current (IDOZE) (see
Table 23-8).
Added Note 4 (reference to new table containing digital-only and analog pin
information, as well as Current Sink/Source capabilities) in the I/O Pin Input
Specifications (Table 23-9).
Updated Max value for BOR electrical characteristics parameter BO10 (see
Table 23-11).
Swapped Min and Typ values for Program Memory parameters D136 and
D137 (Table 23-12).
Updated Typ values for Internal RC Accuracy parameter F20 and added
Extended temperature range to table heading (see Table 23-19).
Removed all values for Reset, Watchdog Timer, Oscillator Start-up Timer,
and Power-up Timer parameter SY20 and updated conditions, which now
refers to Section 20.4 “Watchdog Timer (WDT)” and LPRC parameter
F21 (see Table 23-22).
Added specifications to High-Speed PWM Module Timing Requirements for
Tap Delay (Table 23-29).
Updated Min and Max values for 10-bit High-Speed A/D Module parameters
AD01 and AD11 (see Table 23-36).
Updated Max value and unit of measure for DAC AC Specification (see
Table 23-40).
DS70318D-page 332
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Revision C and D (March 2009)
This revision includes minor typographical and
formatting changes throughout the data sheet text.
Global changes include:
• Changed all instances of OSCI to OSC1 and
OSCO to OSC2
• Changed all instances of PGCx/EMUCx and
PGDx/EMUDx (where x = 1, 2, or 3) to PGECx
and PGEDx
• Changed all instances of VDDCORE and VDDCORE/
VCAP to VCAP/VDDCORE
Other major changes are referenced by their respective
section in the following table.
TABLE A-2:
MAJOR SECTION UPDATES
Section Name
“High-Performance, 16-Bit Digital
Signal Controllers”
Update Description
Added “Application Examples” to list of features
Updated all pin diagrams to denote the pin voltage tolerance (see “Pin
Diagrams”).
Added Note 2 to the 28-Pin QFN-S and 44-Pin QFN pin diagrams, which
references pin connections to VSS.
Section 1.0 “Device Overview”
Added ACMP1-ACMP4 pin names and Peripheral Pin Select capability
column to Pinout I/O Descriptions (see Table 1-1).
Section 2.0 “Guidelines for Getting
Started with 16-bit Digital Signal
Controllers”
Added new section to the data sheet that provides guidelines on getting
started with 16-bit Digital Signal Controllers.
Section 3.0 “CPU”
Updated CPU Core Block Diagram with a connection from the DSP Engine
to the Y Data Bus (see Figure 3-1).
Vertically extended the X and Y Data Bus lines in the DSP Engine Block
Diagram (see Figure 3-3).
Section 4.0 “Memory Organization”
Updated Reset value for ADCON in Table 4-25.
Removed reference to dsPIC33FJ06GS102 devices in the PMD Register
Map and updated bit definitions for PMD1 and PMD6, and removed PMD7
(see Table 4-43).
Added a new PMD Register Map, which references dsPIC33FJ06GS102
devices (see Table 4-44).
Updated RAM stack address and SPLIM values in the third paragraph of
Section 4.2.6 “Software Stack”
Removed Section 4.2.7 “Data Ram Protection Feature”.
Section 5.0 “Flash Program
Memory”
© 2009 Microchip Technology Inc.
Updated Section 5.3 “Programming Operations” with programming time
formula.
Preliminary
DS70318D-page 333
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE A-2:
MAJOR SECTION UPDATES (CONTINUED)
Section Name
Section 8.0 “Oscillator
Configuration”
Update Description
Added Note 2 to the Oscillator System Diagram (see Figure 8-1).
Added a paragraph regarding FRC accuracy at the end of Section 8.1.1
“System Clock Sources”.
Added Note 1 and Note 2 to the OSCON register (see Register ).
Added Note 1 to the OSCTUN register (see Register 8-4).
Added Note 3 to Section 8.4.2 “Oscillator Switching Sequence”.
Section 10.0 “I/O Ports”
Removed Table 9-1 and added reference to pin diagrams for I/O pin
availability and functionality.
Added paragraph on ADPCFG register default values to Section 10.2
“Configuring Analog Port Pins”.
Added Note box regarding PPS functionality with input mapping to
Section 10.4.2.1 “Input Mapping”.
Section 15.0 “High-Speed PWM”
Updated Note 2 in the PTCON register (see Register 15-1).
Added Note 4 to the PWMCONx register (see Register 15-6).
Updated Notes for the PHASEx and SPHASEx registers (see Register 15-9
and Register 15-10, respectively).
Section 16.0 “Serial Peripheral
Interface (SPI)”
Added Note 2 and Note 3 to the SPIxCON1 register (see Register 16-2).
Section 18.0 “Universal
Updated the Notes in the UxMode register (see Register 18-1).
Asynchronous Receiver Transmitter
Updated the UTXINV bit settings in the UxSTA register and added Note 1
(UART)”
(see Register 18-2).
Section 19.0 “High-Speed 10-bit
Analog-to-Digital Converter (ADC)”
Updated the SLOWCLK and ADCS<2:0> bit settings and updated Note 1in
the ADCON register (see Register 19-1).
Removed all notes in the ADPCFG register and replaced them with a single
note (see Register 19-4).
Updated the SWTRGx bit settings in the ADCPCx registers (see
Register 19-5, Register 19-6, Register 19-7, and Register 19-8).
DS70318D-page 334
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE A-2:
MAJOR SECTION UPDATES (CONTINUED)
Section Name
Section 24.0 “Electrical
Characteristics”
Update Description
Updated Typical values for Thermal Packaging Characteristics (see
Table 24-3).
Updated Min and Max values for parameter DC12 (RAM Data Retention
Voltage) and added Note 4 (see Table 24-4).
Updated Characteristics for I/O Pin Input Specifications (see Table 24-9).
Added ISOURCE to I/O Pin Output Specifications (see Table 24-10).
Updated Program Memory values for parameters 136, 137, and 138
(renamed to 136a, 137a, and 138a), added parameters 136b, 137b, and
138b, and added Note 2 (see Table 24-12).
Added parameter OS42 (GM) to the External Clock Timing Requirements
(see Table 24-16).
Updated Conditions for symbol TPDLY (Tap Delay) and added symbol ACLK
(PWM Input Clock) to the High-Speed PWM Module Timing Requirements
(see Table 24-29).
Updated parameters AD01 and AD02 in the 10-bit High-Speed A/D Module
Specifications (see Table 24-36).
Updated parameters AD50b, AD55b, and AD56b, and removed parameters
AD57b and AD60b from the 10-bit High-Speed A/D Module Timing
Requirements (see Table 24-37).
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 335
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
NOTES:
DS70318D-page 336
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
INDEX
CPU
Numerics
10-bit High Speed Analog-to-Digital Converter. See A/D
A
A/D .................................................................................... 229
AC Characteristics ............................................................ 284
Internal RC Accuracy ................................................ 286
Load Conditions ........................................................ 284
Alternate Vector Table (AIVT) ............................................. 87
Arithmetic Logic Unit (ALU)................................................. 27
Assembler
MPASM Assembler................................................... 272
B
Barrel Shifter ....................................................................... 31
Bit-Reversed Addressing .................................................... 66
Example ...................................................................... 67
Implementation ........................................................... 66
Sequence Table (16-Entry)......................................... 67
Block Diagrams
16-Bit Timer1 Module................................................ 175
Comparator ............................................................... 251
Connections for On-Chip Voltage Regulator............. 258
DSP Engine ................................................................ 28
dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 CPU Core.................. 22
dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04 ................................... 14
I2C............................................................................. 216
Input Capture ............................................................ 183
Oscillator System ...................................................... 127
Output Compare ....................................................... 185
PLL............................................................................ 129
Reset System.............................................................. 79
Shared Port Structure ............................................... 145
Simplified Conceptual High-Speed PWM ................. 190
SPI ............................................................................ 209
Timer2/3 (32-Bit) ....................................................... 179
Type B Timer ............................................................ 177
Type C Timer ............................................................ 177
UART ........................................................................ 223
Watchdog Timer (WDT) ............................................ 259
Brown-out Reset (BOR) .................................................... 255
C
C Compilers
MPLAB C18 .............................................................. 272
MPLAB C30 .............................................................. 272
Clock Switching................................................................. 136
Enabling .................................................................... 136
Sequence.................................................................. 136
Code Examples
Erasing a Program Memory Page............................... 77
Initiating a Programming Sequence............................ 78
Loading Write Buffers ................................................. 78
Port Write/Read ........................................................ 147
PWRSAV Instruction Syntax..................................... 137
Code Protection ........................................................ 255, 261
CodeGuard Security ......................................................... 255
Configuration Bits.............................................................. 255
Configuration Register Map .............................................. 255
Configuring Analog Port Pins ............................................ 147
© 2009 Microchip Technology Inc.
Control Registers........................................................ 24
CPU Clocking System ...................................................... 128
PLL Configuration..................................................... 129
Selection................................................................... 128
Sources .................................................................... 128
Customer Change Notification Service............................. 331
Customer Notification Service .......................................... 331
Customer Support............................................................. 331
D
DAC .................................................................................. 252
Output Range ........................................................... 252
Data Accumulators and Adder/Subtracter .......................... 29
Data Space Write Saturation ...................................... 31
Overflow and Saturation ............................................. 29
Round Logic ............................................................... 30
Write Back .................................................................. 30
Data Address Space........................................................... 35
Alignment.................................................................... 35
Memory Map for dsPIC33FJ06GS101/102 Devices
with 256 Bytes of RAM ....................................... 36
Memory Map for dsPIC33FJ06GS202 Device
with 1-Kbyte RAM............................................... 37
Memory Map for dsPIC33FJ16GS402/404/502/504
Devices with 2-Kbyte RAM ................................. 38
Near Data Space ........................................................ 35
Software Stack ........................................................... 63
Width .......................................................................... 35
DC Characteristics............................................................ 276
Doze Current (IDOZE)................................................ 280
I/O Pin Input Specifications ...................................... 281
I/O Pin Output Specifications.................................... 282
Idle Current (IIDLE) .................................................... 279
Operating Current (IDD) ............................................ 278
Power-Down Current (IPD)........................................ 280
Program Memory...................................................... 283
Temperature and Voltage Specifications.................. 277
Development Support ....................................................... 271
Doze Mode ....................................................................... 138
DSP Engine ........................................................................ 27
Multiplier ..................................................................... 29
E
EBCONx (Leading-Edge Blanking Control) ...................... 207
Electrical Characteristics .................................................. 275
AC Characteristics and Timing Parameters ............. 284
BOR.......................................................................... 282
Equations
Device Operating Frequency.................................... 128
FOSC Calculation ...................................................... 129
XT with PLL Mode Example ..................................... 129
Errata .................................................................................. 12
F
Fail-Safe Clock Monitor (FSCM)....................................... 136
Flash Program Memory ...................................................... 73
Control Registers........................................................ 74
Operations .................................................................. 74
Programming Algorithm .............................................. 77
RTSP Operation ......................................................... 74
Table Instructions ....................................................... 73
Flexible Configuration ....................................................... 255
Preliminary
DS70318D-page 337
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
H
High-Speed Analog Comparator ....................................... 251
High-Speed PWM ............................................................. 189
I
I/O Ports ............................................................................ 145
Parallel I/O (PIO)....................................................... 145
Write/Read Timing .................................................... 147
I2C
Operating Modes ...................................................... 215
Registers ................................................................... 215
In-Circuit Debugger ........................................................... 260
In-Circuit Emulation........................................................... 255
In-Circuit Serial Programming (ICSP) ....................... 255, 260
Input Capture .................................................................... 183
Registers ................................................................... 184
Input Change Notification.................................................. 147
Instruction Addressing Modes............................................. 63
File Register Instructions ............................................ 63
Fundamental Modes Supported.................................. 64
MAC Instructions......................................................... 64
MCU Instructions ........................................................ 63
Move and Accumulator Instructions ............................ 64
Other Instructions........................................................ 64
Instruction Set
Overview ................................................................... 266
Summary................................................................... 263
Instruction-Based Power-Saving Modes ........................... 137
Idle ............................................................................ 138
Sleep ......................................................................... 137
Interfacing Program and Data Memory Spaces .................. 68
Internal RC Oscillator
Use with WDT ........................................................... 259
Internet Address................................................................ 331
Interrupt Control and Status Registers................................ 91
IECx ............................................................................ 91
IFSx............................................................................. 91
INTCON1 .................................................................... 91
INTCON2 .................................................................... 91
INTTREG .................................................................... 91
IPCx ............................................................................ 91
Interrupt Setup Procedures ............................................... 125
Initialization ............................................................... 125
Interrupt Disable........................................................ 125
Interrupt Service Routine .......................................... 125
Trap Service Routine ................................................ 125
Interrupt Vector Table (IVT) ................................................ 87
Interrupts Coincident with Power Save Instructions.......... 138
J
JTAG Boundary Scan Interface ........................................ 255
JTAG Interface .................................................................. 260
M
Memory Organization.......................................................... 33
Microchip Internet Web Site .............................................. 331
Modulo Addressing ............................................................. 65
Applicability ................................................................. 66
Operation Example ..................................................... 65
Start and End Address ................................................ 65
W Address Register Selection .................................... 65
MPLAB ASM30 Assembler, Linker, Librarian ................... 272
MPLAB ICD 2 In-Circuit Debugger.................................... 273
MPLAB ICE 2000 High-Performance Universal
In-Circuit Emulator .................................................... 273
DS70318D-page 338
MPLAB Integrated Development Environment Software.. 271
MPLAB PM3 Device Programmer .................................... 273
MPLAB REAL ICE In-Circuit Emulator System ................ 273
MPLINK Object Linker/MPLIB Object Librarian ................ 272
O
Open-Drain Configuration................................................. 146
Oscillator Configuration .................................................... 127
Output Compare ............................................................... 185
P
Packaging ......................................................................... 309
Details....................................................................... 311
Marking ..................................................................... 309
Peripheral Module Disable (PMD) .................................... 138
PICSTART Plus Development Programmer..................... 274
Pinout I/O Descriptions (table)............................................ 15
Power-on Reset (POR)....................................................... 84
Power-Saving Features .................................................... 137
Clock Frequency and Switching ............................... 137
Program Address Space..................................................... 33
Construction ............................................................... 68
Data Access from Program Memory Using
Program Space Visibility..................................... 71
Data Access from Program Memory Using
Table Instructions ............................................... 70
Data Access from, Address Generation ..................... 69
Memory Maps ............................................................. 33
Table Read Instructions
TBLRDH ............................................................. 70
TBLRDL.............................................................. 70
Visibility Operation ...................................................... 71
Program Memory
Interrupt Vector ........................................................... 34
Organization ............................................................... 34
Reset Vector ............................................................... 34
R
Reader Response............................................................. 332
Registers
.................................................................................. 207
A/D Control Register (ADCON) ................................ 237
A/D Convert Pair Control Register 0 (ADCPC0)....... 241
A/D Convert Pair Control Register 1 (ADCPC1)....... 243
A/D Convert Pair Control Register 2 (ADCPC2)....... 246
A/D Convert Pair Control Register 3 (ADCPC3)....... 249
A/D Port Configuration Register (ADPCFG) ............. 240
A/D Status Register (ADSTAT)................................. 239
ACLKCON (Auxiliary Clock Divisor Control)............. 134
ALTDTRx (PWM Alternate Dead-Time).................... 200
CLKDIV (Clock Divisor) ............................................ 131
CMPCPNx (Comparator Control) ............................. 253
CMPDACx (Comparator DAC Control)..................... 254
CORCON (Core Control) ...................................... 26, 92
DTRx (PWMx Dead-Time)........................................ 200
FCLCONx (PWMx Fault Current-Limit Control)........ 204
I2CxCON (I2Cx Control) ........................................... 217
I2CxMSK (I2Cx Slave Mode Address Mask) ............ 221
I2CxSTAT (I2Cx Status) ........................................... 219
ICxCON (Input Capture x Control)............................ 184
IEC0 (Interrupt Enable Control 0) ............................. 103
IEC1 (Interrupt Enable Control 1) ............................. 105
IEC3 (Interrupt Enable Control 3) ............................. 106
IEC4 (Interrupt Enable Control 4) ............................. 106
IEC5 (Interrupt Enable Control 5) ............................. 107
IFS0 (Interrupt Flag Status 0) ..................................... 96
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
IFS1 (Interrupt Flag Status 1) ..................................... 98
IFS3 (Interrupt Flag Status 3) ..................................... 99
IFS4 (Interrupt Flag Status 4) ..................................... 99
IFS5 (Interrupt Flag Status 5) ................................... 100
IFS6 (Interrupt Flag Status 6) ........................... 101, 108
IFS7 (Interrupt Flag Status 7) ........................... 102, 109
INTCON1 (Interrupt Control 1).................................... 93
INTTREG Interrupt Control and Status ..................... 124
IOCONx (PWMx I/O Control) .................................... 202
IPC0 (Interrupt Priority Control 0) ............................. 110
IPC1 (Interrupt Priority Control 1) ............................. 111
IPC14 (Interrupt Priority Control 14) ......................... 116
IPC16 (Interrupt Priority Control 16) ......................... 116
IPC2 (Interrupt Priority Control 2) ............................. 112
IPC23 (Interrupt Priority Control 23) ......................... 117
IPC24 (Interrupt Priority Control 24) ......................... 118
IPC25 (Interrupt Priority Control 25) ......................... 119
IPC26 (Interrupt Priority Control 26) ......................... 120
IPC27 (Interrupt Priority Control 27) ......................... 121
IPC28 (Interrupt Priority Control 28) ......................... 122
IPC29 (Interrupt Priority Control 29) ......................... 123
IPC3 (Interrupt Priority Control 3) ............................. 113
IPC4 (Interrupt Priority Control 4) ............................. 114
IPC5 (Interrupt Priority Control 5) ............................. 115
IPC7 (Interrupt Priority Control 7) ............................. 115
MDC (PWM Master Duty Cycle) ............................... 194
NVMCON (Flash Memory Control) ............................. 75
NVMKEY (Nonvolatile Memory Key) .......................... 76
OCxCON (Output Compare x Control) ..................... 187
OSCCON (Oscillator Control) ................................... 130
OSCTUN (Oscillator Tuning) .................................... 133
PLLFBD (PLL Feedback Divisor).............................. 132
PMD1 (Peripheral Module Disable Control 1)........... 139
PMD2 (Peripheral Module Disable Control 2)........... 140
PMD3 (Peripheral Module Disable Control 3)........... 141
PMD4 (Peripheral Module Disable Control 4)........... 141
PMD6 (Peripheral Module Disable Control 6)........... 142
PMD7 (Peripheral Module Disable Control 7)........... 143
PTCON (PWM Time Base Control) .......................... 192
PWMCAPx (Primary PWMx Time Base Capture)..... 208
PWMCONx (PWMx Control)..................................... 195
RCON (Reset Control) ................................................ 80
REFOCON (Reference Oscillator Control) ............... 135
RPINR0 (Peripheral Pin Select Input 0).................... 152
RPINR1 (Peripheral Pin Select Input 1).................... 153
RPINR11 (Peripheral Pin Select Input 11)................ 156
RPINR18 (Peripheral Pin Select Input 18)................ 157
RPINR20 (Peripheral Pin Select Input 20)................ 158
RPINR21 (Peripheral Pin Select Input 21)................ 159
RPINR29 (Peripheral Pin Select Input 29)................ 160
RPINR3 (Peripheral Pin Select Input 3).................... 154
RPINR30 (Peripheral Pin Select Input 30)................ 161
RPINR31 (Peripheral Pin Select Input 31)................ 162
RPINR32 (Peripheral Pin Select Input 32)................ 163
RPINR33 (Peripheral Pin Select Input 33)................ 164
RPINR34 (Peripheral Pin Select Input 34)................ 165
RPINR7 (Peripheral Pin Select Input 7).................... 155
RPOR0 (Peripheral Pin Select Output 0).................. 165
RPOR1 (Peripheral Pin Select Output 1).................. 166
RPOR10 (Peripheral Pin Select Output 10).............. 170
RPOR11 (Peripheral Pin Select Output 11).............. 171
RPOR12 (Peripheral Pin Select Output 12).............. 171
RPOR13 (Peripheral Pin Select Output 13).............. 172
RPOR14 (Peripheral Pin Select Output 14).............. 172
RPOR16 (Peripheral Pin Select Output 16).............. 173
RPOR17 (Peripheral Pin Select Output 17).............. 173
© 2009 Microchip Technology Inc.
RPOR2 (Peripheral Pin Select Output 2) ................. 166
RPOR3 (Peripheral Pin Select Output 3) ................. 167
RPOR4 (Peripheral Pin Select Output 4) ................. 167
RPOR5 (Peripheral Pin Select Output 5) ................. 168
RPOR6 (Peripheral Pin Select Output 6) ................. 168
RPOR7 (Peripheral Pin Select Output 7) ................. 169
RPOR8 (Peripheral Pin Select Output 8) ................. 169
RPOR9 (Peripheral Pin Select Output 9) ................. 170
SEVTCMP (PWM Special Event Compare) ............. 194
SPIxCON1 (SPIx Control 1) ..................................... 211
SPIxCON2 (SPIx Control 2) ..................................... 213
SPIxSTAT (SPIx Status and Control) ....................... 210
SR (CPU STATUS) .................................................... 92
SR (CPU Status) ........................................................ 24
STRIGx (PWMx Secondary Trigger
Compare Value) ............................................... 206
T1CON (Timer1 Control) .......................................... 176
TRGCONx (PWMx Trigger Control) ......................... 201
TRIGx (PWMx Primary Trigger Compare Value) ..... 206
TxCON (Timer Control, x = 2)................................... 180
TyCON (Timer Control, y = 3)................................... 181
UxMODE (UARTx Mode) ......................................... 224
UxSTA (UARTx Status and Control) ........................ 226
Reset
Configuration Mismatch.............................................. 86
Illegal Opcode....................................................... 79, 86
Trap Conflict ............................................................... 85
Uninitialized W Register ....................................... 79, 86
Reset Sequence ................................................................. 87
Resets ................................................................................ 79
Revision History................................................................ 321
S
Serial Peripheral Interface (SPI) ....................................... 209
Software RESET Instruction (SWR) ................................... 85
Software Simulator (MPLAB SIM) .................................... 272
Software Stack Pointer, Frame Pointer
CALL Stack Frame ..................................................... 63
Special Features of the CPU ............................................ 255
Symbols Used in Opcode Descriptions ............................ 264
T
Temperature and Voltage Specifications
AC............................................................................. 284
Timer1 .............................................................................. 175
Timer2/3 ........................................................................... 177
Timing Diagrams
A/D Conversion per Input ......................................... 305
Brown-out Situations .................................................. 85
External Clock .......................................................... 285
High-Speed PWM..................................................... 294
High-Speed PWM Fault ............................................ 294
I/O............................................................................. 287
I2Cx Bus Data (Master Mode) .................................. 300
I2Cx Bus Data (Slave Mode) .................................... 302
I2Cx Bus Start/Stop Bits (Master Mode)................... 300
I2Cx Bus Start/Stop Bits (Slave Mode)..................... 302
Input Capture (CAPx) ............................................... 292
OC/PWM .................................................................. 293
Output Compare (OCx) ............................................ 292
Reset, Watchdog Timer, Oscillator Start-up Timer
and Power-up Timer ......................................... 288
SPIx Master Mode (CKE = 0) ................................... 295
SPIx Master Mode (CKE = 1) ................................... 296
SPIx Slave Mode (CKE = 0) ..................................... 297
SPIx Slave Mode (CKE = 1) ..................................... 298
Preliminary
DS70318D-page 339
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Timer1, 2, 3 External Clock....................................... 290
Timing Requirements
External Clock ........................................................... 285
I/O ............................................................................. 287
Input Capture ............................................................ 292
Timing Specifications
10-Bit A/D Conversion Requirements ....................... 305
High-Speed PWM Requirements .............................. 294
I2Cx Bus Data Requirements (Master Mode) ........... 301
I2Cx Bus Data Requirements (Slave Mode) ............. 303
Output Compare Requirements ................................ 292
PLL Clock.................................................................. 286
Reset, Watchdog Timer, Oscillator Start-up Timer,
Power-up Timer and Brown-out Reset
Requirements.................................................... 289
Simple OC/PWM Mode Requirements ..................... 293
SPIx Master Mode (CKE = 0) Requirements ............ 295
SPIx Master Mode (CKE = 1) Requirements ............ 296
SPIx Slave Mode (CKE = 0) Requirements .............. 297
DS70318D-page 340
SPIx Slave Mode (CKE = 1) Requirements.............. 299
Timer1 External Clock Requirements ....................... 290
Timer2 External Clock Requirements ....................... 291
Timer3 External Clock Requirements ....................... 291
U
Universal Asynchronous Receiver Transmitter (UART) ... 223
Using the RCON Status Bits............................................... 86
V
Voltage Regulator (On-Chip) ............................................ 258
W
Watchdog Time-out Reset (WDTO).................................... 85
Watchdog Timer (WDT)............................................ 255, 259
Programming Considerations ................................... 259
WWW Address ................................................................. 331
WWW, On-Line Support ..................................................... 12
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
THE MICROCHIP WEB SITE
CUSTOMER SUPPORT
Microchip provides online support via our WWW site at
www.microchip.com. This web site is used as a means
to make files and information easily available to
customers. Accessible by using your favorite Internet
browser, the web site contains the following
information:
Users of Microchip products can receive assistance
through several channels:
• Product Support – Data sheets and errata,
application notes and sample programs, design
resources, user’s guides and hardware support
documents, latest software releases and archived
software.
• General Technical Support – Frequently Asked
Questions (FAQ), technical support requests,
online discussion groups, Microchip consultant
program member listing.
• Business of Microchip – Product selector and
ordering guides, latest Microchip press releases,
listing of seminars and events, listings of
Microchip sales offices, distributors and factory
representatives.
•
•
•
•
Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support
Customers
should
contact
their
distributor,
representative or field application engineer (FAE) for
support. Local sales offices are also available to help
customers. A listing of sales offices and locations is
included in the back of this document.
Technical support is available through the web site
at: http://support.microchip.com
CUSTOMER CHANGE NOTIFICATION
SERVICE
Microchip’s customer notification service helps keep
customers current on Microchip products. Subscribers
will receive e-mail notification whenever there are
changes, updates, revisions or errata related to a
specified product family or development tool of interest.
To register, access the Microchip web site at
www.microchip.com, click on Customer Change
Notification and follow the registration instructions.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 341
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
READER RESPONSE
It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip
product. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our
documentation can better serve you, please FAX your comments to the Technical Publications Manager
at (480) 792-4150.
Please list the following information, and use this outline to provide us with your comments about this document.
To:
Technical Publications Manager
RE:
Reader Response
Total Pages Sent ________
From: Name
Company
Address
City / State / ZIP / Country
Telephone: (_______) _________ - _________
FAX: (______) _________ - _________
Application (optional):
Would you like a reply?
Y
N
Device: dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Literature Number: DS70318D
Questions:
1. What are the best features of this document?
2. How does this document meet your hardware and software development needs?
3. Do you find the organization of this document easy to follow? If not, why?
4. What additions to the document do you think would enhance the structure and subject?
5. What deletions from the document could be made without affecting the overall usefulness?
6. Is there any incorrect or misleading information (what and where)?
7. How would you improve this document?
DS70318D-page 342
Preliminary
© 2009 Microchip Technology Inc.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
dsPIC 33 FJ 06 GS1 02 T E / SP - XXX
Examples:
a) dsPIC33FJ06GS102-E/SP:
SMPS dsPIC33, 6-Kbyte program
memory, 28-pin, Extended
temp.,SPDIP package.
Microchip Trademark
Architecture
Flash Memory Family
Program Memory Size (KB)
Product Group
Pin Count
Tape and Reel Flag (if applicable)
Temperature Range
Package
Pattern
Architecture:
33
=
16-bit Digital Signal Controller
Flash Memory Family: FJ
=
Flash program memory, 3.3V
Product Group:
GS1
GS2
GS4
GS5
=
=
=
=
Switch Mode Power Supply (SMPS) family
Switch Mode Power Supply (SMPS) family
Switch Mode Power Supply (SMPS) family
Switch Mode Power Supply (SMPS) family
Pin Count:
01
02
04
=
=
=
18-pin
28-pin
44-pin
Temperature Range:
I
E
=
=
-40°C to+85°C (Industrial)
-40°C to+125°C (Extended)
Package:
SO
SP
ML
MM
PT
=
=
=
=
=
Plastic Small Outline - Wide - 7.50 mm body (SOIC)
Skinny Plastic Dual In-Line - 300 mil body (SPDIP)
Plastic Quad Flat, No Lead Package - 8x8 mm body (QFN)
Plastic Quad Flat, No Lead Package - 6x6x0.9 mm body (QFN-S)
Plastic Thin Quad Flatpack - 10x10x1 mm body (TQFP)
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 343
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://support.microchip.com
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4080
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Kokomo
Kokomo, IN
Tel: 765-864-8360
Fax: 765-864-8387
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8528-2100
Fax: 86-10-8528-2104
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Taiwan - Hsin Chu
Tel: 886-3-572-9526
Fax: 886-3-572-6459
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Taiwan - Kaohsiung
Tel: 886-7-536-4818
Fax: 886-7-536-4803
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
02/04/09
DS70318D-page 344
Preliminary
© 2009 Microchip Technology Inc.
Similar pages