RCD BC630H-107-B Radial lead megohm resistor Datasheet

RADIAL LEAD MEGOHM RESISTORS
BC SERIES
RoHS
RESISTORSCAPACITORSCOILSDELAY LINES
Term.W is
RoHS
compliant &
260°C
compatible
Wide resistance range up to 1000 MegOhm
TC’s as low as ±25ppm available
Standard tolerance is ±1%; 0.1% available
Significant space savings over axial lead resistors
Available on Tape & Reel
Economically priced
Precision quality, excellent stability, low inductance
New SM model
Space-saving megohm resistors!
RCD Series BC resistors are designed for precision highmegohm requirements where space is at a premium. Operating temperature range is -55°C to +175°C. Type BC632
features the smallest body size. Type BC630 features an
increased voltage rating, wider resistance range, and the
lowest cost. BC633 features two resistors within single
package. Units are epoxy encapsulated for superior environmental protection.
OPTIONS
Option P: increased pulse capability
Option H: increased voltage rating
Option G: gullwing SM lead forming (avail. on 24mm T&R)
Option EQ: 24 hour burn in (or ER -100 hour burn in)
Numerous additional options available including custom
marking, matched sets, military screening, etc.
SPECIFICATIONS
RCD
Type
Wattage
Max.
Voltage*
Dielectric
Strength**
Resistance
Range***
A ±.015 [.38]
B ±.015 [.38]
C ±.01 [.25]
D ±.002 [.05]
E ±.015 [.38]
B C 630
.75W
500V
400V
300K to 1000M
.310 [7.87]
.330 [8.38]
.118 [3.0]
.024 [.6]
.150 [3.81]
B C 632
.75W
400V
400V
300K to 100M
.290 [7.37]
.290 [7.37]
.095 [2.41]
.024 [.6]
.200 [5.08]
B C 633
.25W
per resis.
400V
per resis.
400V
300K to 100M
.290 [7.37]
.290 [7.37]
.095 [2.41]
.024 [.6]
.100 [5.08]
* Maximum working voltage is determined by E =
factory.
PR, E should not exceed value listed. ** Increased dielectric strength available *** Lower and higher values available on custom basis, consult
TYPICAL PERFORMANCE CHARACTERISTICS
Overload (1.5x rated voltage, 5 sec)
Load Life (1000 hours)
±0.5% ∆R
±0.5% ∆R
Dielectric Strength
400V A C
Resistance to Solder Heat
±0.1% ∆R
Moisture Resistance
±0.5% ∆R
Insulation Resistance (dry)
↑
-55°C to 175°C
±0.2% ∆R (1 Yr.)
100ppm/°C std (25, 50,
80ppm avail)
350ppm/°C std
(100,200ppm avail)
Shelf Life at 25°C
300K -100MΩ
>100MΩ
Voltage Coefficient
(tightened VC levels
available)
|←
10,000 Megohms Min.
Operating Temperature Range
Temperature
Coefficient
BC630 & BC632 (single resistor) BC633 (dual resistor)
300K - 1MΩ
-20ppm/ V Typ.
1MΩ - 100MΩ
100M - 500MΩ
500M - 1GΩ
-30ppm/ V Typ.
-50ppm/ V Typ.
-80ppm/ V Typ.
.75
[19]
Min.
A
→|
→|
|←
|←
C
→|
A
→|
↑
↑
B
B
↓
←E→
↓
↑
→
.75
[19]
Min.
←D
|←
C
E
E
E
→
←D
↓
↓
OPT. G GULLWING DESIGN
BC630G
12
12
12
.15 12
12
.075
←
←
P/N DESIGNATION:
→.100
→ .200
123
123
123
123
123
BC632G
.075123
123
123
.15 123
123
.07 .08
BC630
BC633G
123 .075 12 123123
123
12
123
12 123
123123
123
123
123 .15 12
12 123
123123
123
.07 .13
.07 .03
- 1005 - F B 101 W
RCD Type
Options: P, H, G, ER, EQ (leave blank if std)
% OF RATED POWER
DERATING
Resis.Code 0.1%-1%: 3 signif. figures & multiplier,
(e.g. 3003=300KΩ, 1004=1MΩ, 1006=100MΩ)
Resis.Code 2%-5%: 2 signif. figures & multiplier,
(e.g. 304=300KΩ, 105=1MΩ, 107=100MΩ).
When BC633 is comprised of 2 values, separate with /, e.g. 905/105
100
75
50
Tol. Code: J=5%, G=2%, F=1%, D=0.5%, C=0.25%, B=0.1%
25
Packaging: B = Bulk, T = Tape & Reel
0
175
25
50
75
100
AMBIENT TEMPERATURE (°C)
125
150
Temp. Coefficient: 25 = 25ppm, 50 = 50ppm, 80 = 80ppm,
101 = 100ppm, 201=200ppm, 351=350ppm
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable,
in which case RCD will select based on lowest price and quickest delivery)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA035B
71
Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
Similar pages