GE BYWB29-150 Fast efficient plastic rectifier Datasheet

BYWB29-50 THRU BYWB29-200
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts
Forward Current - 8.0 Amperes
FEATURES
TO-263
0.160 (4.06)
0.190 (4.83)
0.380 (9.65)
0.420 (10.67)
0.045 (1.14)
0.245 (6.22)
MIN
0.055 (1.40)
K
0.047 (1.19)
0.055 (1.40)
0.320 (8.13)
0.575 (14.60)
0.360 (9.14)
1
SEATING
PLATE
K
0.625 (15.88)
2
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated chip junction
♦ Low power loss
♦ Low leakage current
♦ High surge current capability
♦ Superfast recovery time for high efficiency
♦ High temperature soldering in accordance with
CECC 802 / Reflow guaranteed
0.090 (2.29)
0.110 (2.79)
-T-
MECHANICAL DATA
0.018 (0.46)
0.095 (2.41)
0.025 (0.64)
0.100 (2.54)
0.080 (2.03)
0.027 (0.686)
0.110 (2.79)
0.037 (0.940)
PIN 1
K - HEATSINK
PIN 2
Case: JEDEC TO-263AB molded plastic body
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
BYWB29-50 BYWB29-100 BYWB29-150 BYWB29-200
UNITS
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
Volts
Maximum RMS voltage
VRMS
35
70
105
140
Volts
Maximum DC blocking voltage
VDC
50
100
150
200
Volts
Maximum average forward rectified current
at TC=125°C
I(AV)
8.0
Amps
Peak forward surge current 10ms
single half sine-wave superimposed TJ=150°C
IFSM
100.0
Amps
VF
1.3
0.8
Volts
IR
10.0
500.0
Maximum instantaneous forward voltage at:
IF=20A, TJ=25°C
IF=8A, TJ=150°C
Maximum DC reverse current
at rated DC blocking voltage
TC=25°C
TC=100°C
µA
Maximum reverse recovery time (NOTE 1)
trr
25.0
ns
Typical junction capacitance (NOTE 2)
CJ
45.0
pF
Maximum thermal resistance (NOTE 3)
RΘJC
3.0
°C/W
TJ, TSTG
-65 to +150
°C
Operating and storage temperature range
NOTES:
(1) Reverse recovery test conditions: IF=1A, VR=30V, di/dt=100A/µs, Irr=10%, IRM for measurement of trr
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to case mounted on heatsink
4/98
RATINGS AND CHARACTERISTIC CURVES BYWB29-50 THRU BYWB29-200
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
FIG. 1 - MAXIMUM FORWARD CURRENT
DERATING CURVE
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
10
RESISTIVE OR INDUCTIVE LOAD
8.0
6.0
4.0
2.0
0
0
50
100
100
TJ=TJ max.
10ms SINGLE HALF SINE-WAVE
(JEDEC Method)
80
60
40
20
150
0
1
10
CASE TEMPERATURE, °C
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE LEAKAGE
CHARACTERISTICS
100
TJ=25°C
10
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
80
PULSE WIDTH=300µs
1% DUTY CYCLE
1
0.1
0.01
0.4
100
NUMBER OF CYCLES AT 50 HZ
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
TJ=125°C
10
TJ=100°C
1
0.1
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
TJ=25°C
0.01
0
20
40
60
80
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
80
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
70
60
50
40
30
20
0.1
1
10
REVERSE VOLTAGE, VOLTS
100
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
100
Similar pages