2SA1255 TOSHIBA Transistor Silicon PNP Triple Diffused (PCT process) 2SA1255 High Voltage Switching Applications • High voltage: VCBO = −200 V (min) • Small package • Complementary to 2SC3138 Unit: mm VCEO = −200 V (min) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO −200 V Collector-emitter voltage VCEO −200 V Emitter-base voltage VEBO −5 V Collector current IC −50 mA Base current IB −20 mA Collector power dissipation PC 150 mW Junction temperature Tj 125 °C Tstg −55~125 °C Storage temperature range JEDEC TO-236MOD JEITA SC-59 Note: Using continuously under heavy loads (e.g. the application of high TOSHIBA 2-3F1A temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the Weight: 0.012 g (typ.) reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Marking 1 2007-11-01 2SA1255 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = −200 V, IE = 0 ⎯ ⎯ −0.1 μA Emitter cut-off current IEBO VEB = −5 V, IC = 0 ⎯ ⎯ −0.1 μA Collector-base breakdown voltage V (BR) CBO IC = −0.1 mA, IE = 0 −200 ⎯ ⎯ V Collector-emitter breakdown voltage V (BR) CEO IC = −1 mA, IB = 0 −200 ⎯ ⎯ V VCE = −3 V, IC = −10 mA 70 ⎯ 240 hFE DC current gain (Note) Collector-emitter saturation voltage VCE (sat) IC = −10 mA, IB = −1 mA ⎯ −0.2 −1 V Base-emitter saturation voltage VBE (sat) IC = −10 mA, IB = −1 mA ⎯ −0.75 −1.5 V fT VCE = −10 V, IC = −2 mA 50 100 ⎯ MHz Cob VCB = −10 V, IE = 0, f = 1 MHz ⎯ 3 7 pF Turn-on time ton VCC = −50 V, IC = −6 mA ⎯ 0.3 ⎯ Storage time tstg ⎯ 2 ⎯ ⎯ 0.4 ⎯ Transition frequency Collector output capacitance Switching time Fall time tf −IB1 = IB2 = 0.6 mA Pulse width = 5 μs Duty cycle < = 2% μs Note: hFE classification O: 70~140, Y: 120~240 2 2007-11-01 2SA1255 3 2007-11-01 2SA1255 4 2007-11-01 2SA1255 RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2007-11-01