TOSHIBA RN2421

RN2421~RN2427
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process)
RN2421,RN2422,RN2423,RN2424
RN2425,RN2426,RN2427
Switching, Inverter Circuit, Interface Circuit
And Driver Circuit Applications
Unit: mm
l
High current type (IC(MAX) = −800mA)
l
With built-in bias resistors
l
Simplify circuit design
l
Reduce a quantity of parts and manufacturing process
l
Low VCE (sat)
l
Complementary to RN1421~RN1427
Equivalent Circuit and Bias Resistor Values
Type No.
R1 (kΩ)
R2 (kΩ)
RN2421
1
1
RN2422
2.2
2.2
RN2423
4.7
4.7
RN2424
10
10
RN2425
0.47
10
RN2426
1
10
JEDEC
RN2427
2.2
10
JEITA
SC-59
TOSHIBA
2-3F1A
―
Weight: 0.012 g (typ.)
Maximum Ratings (Ta = 25°°C)
Characteristics
Collector-Base voltage
Collector-Emitter voltage
RN2421~2427
Symbol
Rating
Unit
VCBO
−50
V
VCEO
−50
V
RN2421~2424
Emitter-Base voltage
RN2425, 2426
−10
VEBO
−5
RN2427
Collector current
Collector power dissipation
Junction temperature
Storage temperature range
RN2421~2427
V
−6
Ic
−800
mA
Pc
200
mW
Tj
150
°C
Tstg
−55~150
°C
1
2001-11-29
RN2421~RN2427
Electrical Characteristics (Ta = 25°°C)
Characteristics
Collector cut-off current
Emitter cut-off current
DC current gain
RN2421~2427
Symbol
Test
Circuit
ICBO
―
ICEO
―
RN2421
―
RN2422
―
RN2423
―
RN2424
IEBO
Input voltage (ON)
Input voltage (OFF)
Collector output
capacitance
Input resistor
Resistor ratio
Typ.
Max
VCB = −50V, IE = 0
―
―
−100
VCE = −50V, IB = 0
―
―
−500
−3.85
―
−7.14
−1.75
―
−3.25
−0.82
―
−1.52
−0.38
―
−0.71
−0.365
―
−0.682
−0.35
―
−0.65
VEB = −10V, IC = 0
―
―
RN2426
―
RN2427
―
−0.378
―
−0.703
RN2421
―
60
―
―
RN2422
―
65
―
―
RN2423
―
70
―
―
90
―
―
90
―
―
RN2424
hFE
―
―
VEB = −5V, IC = 0
VEB = −6V, IC = 0
VCE = −1V,
IC = −100mA
RN2426
―
90
―
―
RN2427
―
90
―
―
―
―
−0.25
RN2421
RN2422~2427
VCE (sat)
―
IC = −50mA, IB = −2mA
IC = −50mA, IB = −1mA
RN2421
―
−1.0
―
−3.5
RN2422
―
−1.4
―
−4.5
RN2423
―
−2.0
―
−6.5
−3.0
―
−12.0
−0.6
―
−2.0
−0.7
―
−2.5
RN2424
VI (ON)
―
VCE = −0.2V
IC = −100mA
RN2425
―
RN2426
―
RN2427
―
−1.0
―
−3.0
RN2421~2424
―
−0.8
―
−1.3
−0.4
―
−0.8
−0.5
―
−1.0
RN2425, 2426
VI (OFF)
RN2427
Transition frequency
Min
RN2425
RN2425
Collector-Emitter
saturation voltage
Test Condition
RN2421~2427
RN2421~2427
―
―
fT
Cob
VCE = −5V,
IC = −0.1mA
V
200
―
MHz
―
―
13
―
pF
0.7
1.0
1.3
1.54
2.2
2.86
RN2423
―
3.29
4.7
6.11
―
―
7
10
13
0.329
0.47
0.61
RN2425
―
RN2426
―
0.7
1.0
1.3
RN2427
―
1.54
2.2
2.86
RN2421~2424
―
0.9
1.0
1.1
RN2425
―
0.0423
0.047
0.0517
0.09
0.1
0.11
0.2
0.22
0.24
RN2427
V
―
―
R1/R2
V
VCB = −10V, IE = 0
f = 1MHz
―
RN2426
mA
VCE = −5V, IC = −20mA
RN2422
R1
nA
―
RN2421
RN2424
Unit
―
―
2
―
kΩ
2001-11-29
RN2421~RN2427
Marking
Type No.
Marking
Type name
RN2421
R A
Type name
RN2422
R B
Type name
RN2423
R C
Type name
RN2424
R D
Type name
RN2425
R E
Type name
RN2426
R F
Type name
RN2427
R G
3
2001-11-29
RN2421~RN2427
4
2001-11-29
RN2421~RN2427
5
2001-11-29
RN2421~RN2427
6
2001-11-29
RN2421~RN2427
7
2001-11-29
RN2421~RN2427
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
8
2001-11-29