Acoustic Signals - Industrial ELECTRICAL/MECHANICAL BUZZERS 85.0mm 52.0mm 18.0mm 85.0mm 52.0mm 18.0mm N L E N Ø96.0mm 26.0mm 112.0mm 26.0mm Acoustic Signals Industrial Buzzers > AE95 Series The AE95 are electrical/mechanical buzzers suitable for a wide range of signalling applications where a low frequency and penetrating sound is required. Typical applications would be for industrial (stop/start & time signalling etc) & automotive applications (reversing alarm/forklift truck etc) The units offer a single stage alarm, once energised an electromagnet causes the diaphragm to vibrate creating a unique acoustic tone. 137.0mm 137.0mm 75.0mm 112.0mm 75.0mm Product overview They can also be pulsed via a remote source (ie control panel/plc etc) to give an intermittent signal if required. This version of the AE95 comes complete with a weatherproof back box that allows for termination inside the enclosure. A weatherproof cable gland is supplied as standard. Features • Rugged construction • Wide voltage range • These units are rated 15 mins On max / 1 min Off minimum AE95 Series > Ordering Information • Suitable for 2 point Code No: Voltage: Frequency: Current: AE95-07 AE95-08 24/48v Ac/Dc --~ 115/230v Ac/Dc--~ 420 Hz 420 Hz 0.8 A 0.4/0.2 A automotive fix and Weatherproof when fitted with AE95-BB back box • Dustproof Material Powder Coated Mild Steel Kg 0.68 APPROVALS and CONFORMITIES 50/60 Hz C -30+60 o IP 65 Wh Ø105.0mm E Ø96.0mm L When fitted with AE95-BB dB 111 MARINE ON 15 MINS OFF 1 MINS INDUSTRIAL