UTC DTC115E Npn digital transistor (built-in resistors) Datasheet

UNISONIC TECHNOLOGIES CO., LTD
DTC115E
NPN EPITAXIAL SILICON TRANSISTOR
NPN DIGITAL TRANSISTOR
(BUILT-IN RESISTORS)
3
FEATURES
2
* Built-in bias resistors enable the configuration of an inverter circuit
without connecting external input resistors.
* The bias resistors consist of thin-film resistors with complete
isolation to allow positive biasing of the input They also have the
advantage of almost completely eliminating parasitic effects.
* Only the on / off conditions need to be set for operation, making
device design easy.
1
SOT-23
3
2
1
SOT-523
*Pb-free plating product number: DTC115EL
ORDERING INFORMATION
Order Number
Normal
Lead Free Plating
DTC115E-AE3-6-R
DTC115EL-AE3-6-R
DTC115E-AN3-6-R
DTC115EL-AN3-6-R
DTC115EL-AE3-6-R
Package
SOT-23
SOT-523
(1)Packing Type
(2)Pin Assignment
(3)Package Type
(4)Lead Plating
Pin Assignment
1
2
3
G
I
O
G
I
O
Packing
Tape Reel
Tape Reel
(1) R: Tape Reel
(2) refer to Pin Assignment
(3) AE3: SOT-23, AN3: SOT-523
(4) L: Lead Free Plating, Blank: Pb/Sn
MARKING INFORMATION
CB5
www.unisonic.com.tw
Copyright © 2005 Unisonic Technologies Co., Ltd
1 of 2
QW-R206-055,B
DTC115E
NPN EPITAXIAL SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATING ( Ta=25℃ )
PARAMETER
SYMBOL
VCC
VIN
IOUT
IC(MAX)
RATINGS
UNIT
50
V
-10 ~ +40
V
20
Output Current
mA
100
SOT-23
200
mW
Power Dissipation
PD
SOT-523
150
mW
Junction Temperature
TJ
+150
℃
Storage Temperature
TSTG
-40 ~ +150
℃
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Supply Voltage
Input Voltage
ELECTRICAL CHARACTERISTICS (Ta=25℃, unless otherwise specified)
PARAMETER
SYMBOL
VI(OFF)
Input Voltage
VI(ON)
Output Voltage
VOUT(ON)
Input Current
IIN
Output Current
IO(OFF)
DC Current Gain
GI
Input Resistance
R1
Resistance Ratio
R2/R1
Transition Frequency
fT
*Transition frequency of the device
TEST CONDITIONS
VCC=5V, IOUT=100µA
VOUT=0.3V, IOUT=1mA
IOUT=5 mA, IIN=0.25mA
VIN= 5V
VCC=50V, VIN=0V
VOUT= 5V, IOUT= 5mA
VCE=10V, IE=-5mA, f=100MHz *
MIN
3
82
70
0.8
TYP MAX UNIT
0.5
V
0.1
0.3
0.15
0.5
V
mA
µA
100
1
250
130
1.2
kΩ
MHz
EQUIVALENT CIRCUIT
OUT
R1
IN
R2
GND
IN
OUT
GND
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 2
QW-R206-055,B
Similar pages