February 12, 2007 SMD SHIELDED INDUCTOR DR358-5 SERIES Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Inductance Range from 3.0µH to 100.0µH Operating Temp. -20°C to +80°C Tinned Leads with Leaded Solder is Available (note 7) ELECTRICAL SPECIFICATIONS AT 25ºC Part No. DR358-5-302 DR358-5-392 DR358-5-502 DR358-5-602 DR358-5-732 DR358-5-862 DR358-5-103 DR358-5-123 DR358-5-153 DR358-5-183 DR358-5-223 DR358-5-273 DR358-5-333 DR358-5-393 DR358-5-473 DR358-5-563 DR358-5-683 DR358-5-823 DR358-5-104 Inductance (µH) ± 30% 3.0 3.9 5.0 6.0 7.3 8.6 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 DCR (Ω) Max. 0.024 0.027 0.031 0.035 0.054 0.058 0.065 0.070 0.084 0.095 0.128 0.142 0.165 0.210 0.238 0.277 0.304 0.390 0.535 I rated (A) Max. 3.00 2.60 2.40 2.25 2.10 1.85 1.70 1.55 1.40 1.32 1.20 1.05 0.97 0.86 0.80 0.73 0.65 0.60 0.54 MECHANICAL OUTLINES Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Inductance Test: 10kHz, 0.1Vrms 4. Irated for an approximate 40°C temperature rise 5. Irated for an approximate 35% drop maximum of the initial value 6. Tape and reel quantity, 1500 pcs/ 13” reel 7. For non-RoHS parts replace DR prefix with 42- (e.g. DR358-5 becomes 42-358-5) 8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C. DATATRONIC: 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.