Series AM1PS-Z 1 Watt | DC-DC Converter FEATURES: • • • • Operating temperature -40oC to + 85oC Input / Output Isolation 1000 & 3000VDC Pin compatible with multiple manufacturers Continuous Short Circuit Protection • • • • RoHS compliant 8 Pin DIP Package Low ripple and noise High Efficiency up to 76% Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM1PS-0505SZ AM1PS-0512SZ AM1PS-0515SZ AM1PS-1205SZ AM1PS-1212SZ AM1PS-1215SZ AM1PS-2405SZ AM1PS-2412SZ AM1PS-2415SZ 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 5 12 15 5 12 15 5 12 15 200 83 67 200 83 67 200 83 67 1000 1000 1000 1000 1000 1000 1000 1000 1000 74 75 75 74 75 75 74 75 76 AM1PS-0505SH30Z AM1PS-0512SH30Z AM1PS-0515SH30Z AM1PS-1205SH30Z AM1PS-1212SH30Z AM1PS-1215SH30Z AM1PS-2405SH30Z AM1PS-2412SH30Z AM1PS-2415SH30Z 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 5 12 15 5 12 15 5 12 15 200 83 67 200 83 67 200 83 67 3000 3000 3000 3000 3000 3000 3000 3000 3000 74 75 75 74 75 75 74 75 76 Models Dual output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM1PS-0505DZ AM1PS-0512DZ AM1PS-0515DZ AM1PS-1205DZ AM1PS-1212DZ AM1PS-1215DZ AM1PS-2405DZ AM1PS-2412DZ AM1PS-2415DZ 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±100 ±42 ±33 ±100 ±42 ±33 ±100 ±42 ±33 1000 1000 1000 1000 1000 1000 1000 1000 1000 70 73 73 71 73 74 71 74 74 AM1PS-0505DH30Z AM1PS-0512DH30Z AM1PS-0515DH30Z AM1PS-1205DH30Z AM1PS-1212DH30Z AM1PS-1215DH30Z AM1PS-2405DH30Z AM1PS-2412DH30Z AM1PS-2415DH30Z 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±100 ±42 ±33 ±100 ±42 ±33 ±100 ±42 ±33 3000 3000 3000 3000 3000 3000 3000 3000 3000 70 73 73 71 73 74 71 74 74 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 1 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1PS-Z 1 Watt | DC-DC Converter Input Specifications Parameters Nominal Typical 5 12 24 Voltage range 4.5-5.5 10.8-13.2 21.6-26.4 Capacitor Filter Turn on Transient process time Start up time Absolute Maximum Rating Peak Input Voltage time Input Reflected Ripple current Maximum VDC 25 ms ms 200 0-7 0-15 0-28 100 20 5 Vin 12 Vin 24 Vin With 12µH Units VDC ms mA p-p Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 3 sec Rated Units 1000 all models, 3000 (single output) VDC MOhm pF > 1000 10 Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Rising time Conditions Typical Maximum ±3 Continuous Auto-Recovery ±1.2 ±10 ±0.02 100 50 For 1% change of Vin Load 20 – 100% At 20MHz Bandwidth Units % % % %/oC mV p-p ms General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load Full Load without Derating 80 Maximum Units 100 KHz o C o C o C -40 to+85 -40 to +125 Free air convection 95 Non-conductive black plastic 1.8 0.50 x 0.40 x 0.27 inches 12.70 x 10.16 x 6.85 mm >1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) % g Safety Specifications Parameters Standards www.aimtec.com F 051e R12.B NOTE: Designed to meet IEC 60950-1 Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1PS-Z 1 Watt | DC-DC Converter Pin Out Specifications Pin 1 4 5 6 7 8 1000 and 3000 VDC Single Dual - V Input + V Input + V Output No pin - V Output No pin - V Input + V Input + V Output No pin Common - V Output Dimensions NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only