DC/DC Converters CTDD1906SF-D1K-1 Series Fixed Input Isolated & Unregulated 1W Output, Dual Output Not shown at actual size. RoHS Compliant ctparts.com SPECIFICATIONS Vin Nom. (VDC) Part Number Vin Range (VDC) Voltage Out (VDC) Io Max. (mA) Io Min. (mA) Effi. Typ. (%) CTDD1906SF-0505-D1K-1 CTDD1906SF-0509-D1K-1 CTDD1906SF-0512-D1K-1 CTDD1906SF-0515-D1K-1 5 5 5 5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 ±5 ±9 ±12 ±15 ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 72 75 78 79 CTDD1906SF-1205-D1K-1 CTDD1906SF-1209-D1K-1 CTDD1906SF-1212-D1K-1 CTDD1906SF-1215-D1K-1 12 12 12 12 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 74 76 79 80 CTDD1906SF-2405-D1K-1 CTDD1906SF-2409-D1K-1 CTDD1906SF-2412-D1K-1 CTDD1906SF-2415-D1K-1 24 24 24 24 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±9 ±12 ±15 ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 74 76 80 81 ISOLATION SPECIFICATIONS Item Test Condition MIN Isolation Voltage Tested for 1 minute 1000 VDC Isolation Resistance Test at 500VDC 1000 MΩ Item Test Condition TYP Units MAX Units 1 W 0.1 Line regulation For Vin change of 1% Load regulation 10% to 100% full load Output voltage accuracy 10 1.2 % 15 % See tolerance envelope graph Temperature drift 100% full load Output ripple 20MHz Bandwidth 50 Switching frequency Full load, nominal input 100 0.03 %/°C 75 mVp-p KHz Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output unless otherwise specified. CHARACTERISTICS TYPICAL CHARACTERISTICS Temperature Derating Graph Tolerance Envelope Graph +10% +5% Nominal Voltage Output Voltage(%) Short Circuit Protection: 1 second Temperature Rise at Full Load: 25°C Max. 15°C Typ. Cooling: Free air convection Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -55°C to +125°C Lead Temperature: 300°C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Plastic (UL94-V0) MTBF: >3,500,000 hours Miscellaneous: RoHS Compliant. MIN Output Power Typic a l Load Line +2.5% -2.5% -7.5% 10% 50% 100% Output Current(%) 12.18.06 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice Output Power(%) Efficiency: To 80% Temperature Range: -40°C to +85°C Isolation: 1KVDC Package: UL94-V0 Miscellaneous: Positive & Negative Voltage Output. No heat sink required. No external components required. Industry standard pinout. Small Footprint. SIP package style. Power Density 0.85W/cm³. Low Cost. Samples available. Technologies MAX OUTPUT SPECIFICATIONS FEATURES CENTRAL TYP 120 100 80 60 Safe Operating Area 40 20 0 -40 0 40 80 120 Ambient Temperature(°C) DC/DC Converters ctparts.com CTDD1906SF-D1K-1 Series Fixed Input Isolated & Unregulated 1W Output, Dual Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD1906SF-D1K-1 Package 19.60 Side View 10.00 4.10 1.25 12 456 6.00 Bottom View 12.70 2.00 CTDD1906SF-D1K-1 Footprint 2.54 1.00ø+0.15/-0 1 2 4 5 6 2.54 Note: All Pins on a 2.54m pitch; all pin diameters are 0.50mm; all dimensions in mm. PIN CONNECTIONS Pin Function 1 2 4 5 6 Vin GND -Vo 0V +Vo 12 456 CENTRAL Technologies 12.18.06 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice