Purdy AND114Y-YP Standard bright led lamp Datasheet

AND114Y/YP
Standard Bright LED LAMPS
Weight: 0:30 g
Unit: mm
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with
the design of equipment incorporating this product.
ø5.8 ± 0.2
AND114Y
12.75 ±0.5
AND114Y/YP
Standard LED
T-1 3/4 Package (5 mm)
(1)
7.6
2.5 max including resin
ø5.0 ± 0.2
Cathode
Index
Features
21.1
0.5
1.5
2.54
0.5
Cathode Index
1
2
• RoHS Compliant
• Low power requirement
• Flush-mount
• All plastic molded lens
• Color: GaAsP–Yellow
1. Anode
2. Cathode
Optical Characteristics (Ta = 25°C)
ø5.8 ± 0.2
AND114YP
Color
Lens
Yellow
Yellow
Min.
Typ.
5
18
10
Diffused
Viewing
Angle
2θ1/2
(deg)
60
7.6
LED
Test
Condition
(IF–mA)
Absolute Maximum Ratings (Ta = 25°C)
(1)
2.54
2
0.5
Cathode Index
1
Symbol
Rating
(Yellow)
Unit
Forward Current (DC)
IF
30
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
105
mW
Operating Temperature
TOpr
-40 to +85
°C
Storage Temperature Range
TStg
-40 to +85
°C
Characteristics
26.5
0.5
1.5
2.5 max including resin
ø5.0 ± 0.2
Axial Luminous
Intensity (mcd)
Lens
Desc.
1. Anode
2. Cathode
Electro-Optical Characteristics (Ta = 25°C)
Yellow
Characteristics
Symbol
Test Condition
Unit
Min.
Typ.
Max.
IF = 20mA
–
2.1
2.5
V
Forward Voltage
VF
Reverse Current
IR
VR = 5 V
–
–
10
µA
Peak Emission Wavelength
λp
IF = 15mA
–
590
–
nm
Spectral Line Half Width
λ
IF = 15mA
–
35
–
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the
body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be
performed after the lead forming.
7/18/07
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected]
www.purdyelectronics.com
1
AND114Y/YP
Standard LED
Standard Bright LED LAMPS
IF vs. VF
50
Radiation Pattern
TA = 25°C
Forward Current IF (mA)
30
20
20°
0°
10°
10°
20°
30°
30°
10
40°
40°
50°
50°
5
60°
60°
3
70°
70°
2
80°
80°
90°
1.0
1
1.7
1.8
1.9
2.0
2.1
Forward Voltage VF (V)
2.2
0.8
0.6
0.4
0.2
0
0.2
0.4
0.6
0.8
90°
1.0
2.3
IV vs. IF
Relative Luminous Intensity – Wavelength
5
2
Relative Luminous Intensity
Relative Luminous Intensity IV
1.0
1
0.5
0.2
0.1
1
2
5
10
20
Forward Current IF (mA)
0.8
0.6
0.4
0.2
0
50
580
560
Allowable Forward Current IF (mA)
Relative Luminous Intensity IV
3
2
620
640
660
IV vs.TA
IV vs. TC
2
1
0.5
0.4
0.3
-20
600
Wavelength λ (nm)
This graph shows relative luminous vs. forward current.
At three points (IF = 10, 15, 20mA) each relation is normalized.)
0
20
40
60
Case Temperature TC (°C)
80
40
30
20
10
0
0
20
40
60
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected]
www.purdyelectronics.com
80
100
Ambient Temperature TA (°C)
7/18/07
Similar pages