Metal Film Resistors Discontinued Metal Film Resistors Type: EROS2 (0.25 W) ERO25 (0.25 W) ■ Features ● Performance, Reliability...... Low T.C.R. and noise, high reliability ● Automatic insertion ............. Taping style for automatic inserting machine ● Marking............................... 5 color code marking ● Reference Standards ......... IEC 60115-2, JIS C 5201-2 ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E R O S 2 C H F 1 0 0 2 Product Code Metal Film Resistors Special Feature and Cut & Formed Style Power Rating at 70 °C Amb. S2 25 0.25 W 0.25 W C P T Standard Taped & Box (52 mm) Taped & Box (26 mm) ■ Construction Temperature Coefficient ҂10–6/°C(ppm/°C) ± 50 H Resistance Tolerance D F ■ Dimensions in mm (not to scale) H Metal film ± 0.5 % ±1% Resistance Value The first three digits are significant figures of resistance and the 4th digit denote number of zeros following. Decimal point is expressed by R as 97.6 = 97R6. L Lead wire fd 1st significant figure Ceramic core, high thermal conductivity fD H Insulative coating 2nd significant figure Resistance tolerance 3rd significant figure Multiplier Standard Quantity : 2000 pcs. Spiraling Marking Dimensions (mm) Type L EROS2C 3.20 ERO25C 6.30 ±0.20 fD +0.20 1.70 –0.10 fd 0.45 ±0.05 H 30 ±3 Mass (Weight) [mg/pc.] 107 End cap ±0.50 2.30 ±0.50 0.60 ±0.05 30 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. ±3 228 Feb. 2006 Discontinued Metal Film Resistors ■ Ratings Limiting Element Voltage (1) (Maximum RCWV) (V) Power Rating at 70 °C (W) Type Maximum Overload (2) Voltage (V) Dielectric Withstanding Voltage (VAC) Resistance Tolerance (%) T.C.R. –6 [҂10 /°C (ppm/°C)] EROS2 0.25 250 500 300 ±50 ERO25 0.25 250 500 500 ±50 F(±1) D(±0.5) F(±1) D(±0.5) Resistance ResisRange tance (액) Value min. max. 10 1 M 10 1 M E24 E96 E24 E96 (1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV= =앀Power Rating҂Resistance Value, or Limiting Element Voltage (maximum RCWV) listed above, whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5҂Power Rating or max. Overload Voltage listed above whichever less. Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. Rated Load (%) 120 100 –55 °C 70 °C 80 60 40 20 0 –60 –40 –20 0 150 °C 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) ■ Shape and Packaging ● Axial taping type 6±1 3.2 min. L 0.5 max. Shape P 0 L1 0.8 max. L2 1 max. P fD fd 0.5 max. W 1 2 3 4 L max. 3.4 3.4 6.5 6.5 fD max. 1.9 1.9 2.5 2.5 fd 0.45 0.45 0.6 0.6 P ±0.3 5.0 5.0 5.0 5.0 W W0 26+1 –0 52±1 +1 26 – 0 52±1 41.5max. 64.5±0.5 41.5max. 64.5±0.5 쪧 |L1– L 2| <1.0 쪨 Cumulative 250±2 mm by 50 pitch W0 Flat box Packaging Shape b Ma rkin a g c 26 mm Axial taping 52 mm Axial taping 26 mm Axial taping 52 mm Axial taping Type Part Numbers Std. Qty. (pcs./box) Size of box a҂b҂c (mm) 1 Metal Film R EROS2THO첸첸첸첸 5000 52҂85҂255 2 Metal Film R EROS2PHO첸첸첸첸 5000 78҂85҂255 3 Metal Film R ERO25THO첸첸첸첸 4000 52҂95҂255 4 Metal Film R ERO25PHO첸첸첸첸 2000 78҂58҂255 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006 Discontinud Metal Film Resistors ● Radial Taping for small type P2 P h A Type fD Metal Film R Part Numbers EROS2GHO첸첸첸첸 Std. Qty. (pcs.) 2000 F l P0 t W W0 W1 H0 P1 W2 fd fD0 Dimensions (mm) 12.7±1.0 12.7±0.3 3.85±0.70 6.35±1.00 5.0±0.5 18.0±0.5 W0 W1 W2 H0 fD0 5 min. 9.0±0.5 3 max. 19.0+1.0 –0.5 4.0±0.2 0 max. k Dimensions (mm) 욼h t A fD fd 0±2 0.7±0.2 3.2±0.2 1.7+0.2 –0.1 0.45±0.05 130 P P0 P1 P2 F W Dimensions (mm) Indication 45 320 Safety Precautions The following are precautions for individual products. Please also refer to the precautions common to Fixed Resistors shown on page ER3 of this catalog. 1. Keep the rated power and ambient temperature within the specified derating curve. * When positioning and mounting Metal Film Resistors (hereaf ter called the resistors), make allowance for the effect of heat generated through close contact between the resistors and neighboring components and for the temperature rise of adjacent heat-generating components. 2. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations of the resistors when installed in your products before use. When applying pulses to the resistors, keep the pulse peak within the rated voltage. 3. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may be impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage during handling of the boards with the resistors mounted. 4. Ultrasonic cleaning may cut the lead wire due to resonance. Try and check it before use. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006 Safety Precautions (Common precautions for Fixed Resistors) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (au to mo bile, train, vessel), traffi c lights, medical equipment, aerospace equipment, elec tric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault (1) Precautions for use • These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric ap plianc es, offi ce equipment, information and com mu ni cation equipment) • These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. 1. In liquid, such as water, oil, chemicals, or organic solvent 2. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 4. Electric Static Discharge (ESD) Environment These components are sensitive to static electricity and can be damaged under static shock (ESD). Please take measures to avoid any of these environments. Smaller components are more sensitive to ESD environment. 5. Electromagnetic Environment Avoid any environment where strong electromagnetic waves exist. 6. In an environment where these products cause dew condensation 7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin or other materials • These products generate Joule heat when energized. Carefully position these products so that their heat will not affect the other components. • Carefully position these products so that their temperatures will not exceed the category temperature range due to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or inflammables, such as vinyl-coated wires, near these products . • Note that non- cleaning solder, halogen-based highly active fl ux, or water-soluble fl ux may deteriorate the performance or reliability of the products. • Carefully select a fl ux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues. Otherwise, the insulation performance may be deteriorated. (2) Precautions for storage The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 ° C and a relative humidity of 45 % to 85 %. Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 2. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Feb. 2006 – ER3 –