date 06/23/2011 page 1 of 5 SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY FEATURES •Up to 6 W power •Compact size •Single output from 3 ~ 24 V •Overload, over voltage, and short circuit protections •100 ~ 132 Vac input voltage •meets EISA / efficiency level IV regulations •custom designs available RoHS C UL US ® output voltage output current output power ripple and noise1 nominal (Vdc) max (A) max (W) max (mVp-p) EPS030100 3 1 3 100 IV EPS033100 3.3 1 3.3 100 IV EPS045100 4.5 1 4.5 100 V EPS050100 5 1 5 100 V EPS060100 6 1 6 100 V EPS090066 9 0.66 6 100 V EPS120050 12 0.5 6 150 V EPS150040 15 0.4 6 150 V EPS180033 18 0.33 6 180 V EPS240025 24 0.25 6 240 IV MODEL Notes: efficiency level 1. At full load, 100 ~ 132 Vac input, 20 MHz bandwidth oscilloscope, each output terminated with 10 μF aluminum electrolytic and 0.1 μF ceramic capacitors. PART NUMBER KEY EPS030100 - PXXXX - CXX Base Number example of 3 Vdc, 1 A DC Plug Type: see output plug options on page 4 cui.com Reserved for Custom Configurations CUI Inc │ SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY date 06/23/2011 │ page 2 of 5 INPUT parameter conditions/description min voltage frequency max units 100 typ 132 Vac 47 63 Hz 1 A 40 A 0.5 W max units input current inrush current 120 Vac, inrush lasts no longer than 0.5 ms before settling to steady state current no load power consumption OUTPUT parameter conditions/description min typ line regulation ±1 % load regulation ±5 % temperature coefficient 0 ~ 40°C, full load, after initial 1 hour warm-up start-up time time needed to reach regulation hold-up time at 115 Vac, full load ±0.02 %/°C 3 10 s ms PROTECTIONS parameter conditions/description min typ max units over voltage protection clamped by internal protection zener overload protection Fold-back current limiting starts at 105 ~ 160% of the rated output current. Auto-recovery. Long term exposure to overload condition may reduce product reliability. short circuit protection Continuous, auto-recovery upon removal of short SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output at 10 mA for 1 minute isolation resistance input to output at 500 Vdc safety approvals UL/cUL 1310 EMI standard FCC part 15 class B leakage current at 120 Vac class 2 power supply yes MTBF at 25°C, per MIL-HDBK-217E RoHS compliant yes min typ max units 3,000 Vac 100 MΩ 0.5 240,000 mA hours ENVIRONMENTAL parameter conditions/description min max units 0 40 °C storage temperature -10 70 °C operating humidity 20 80 % storage humidity 10 90 % operating temperature cui.com typ CUI Inc │ SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY date 06/23/2011 │ page 3 of 5 MECHANICAL DRAWING 17.0 42 1.0 input plug US blade case size 62.3 L x 26.8 W x 42 H mm tolerance: ±1 mm 26.8 1.0 12.7 62.3 1.0 22.3X18.0 1830 100 Units: mm 6.3 3.0 (TYP) Tolerance: X.X ±0.5mm X.XX ±0.03mm NOTE 1: THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTED IN A VERTICAL OR FLOOR MOUNT POSITION. cui.com CUI Inc │ SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY date 06/23/2011 │ page 4 of 5 OUTPUT PLUG OPTIONS IJĵġƲıįĶ ǹĴįĶġĬıİĮıįIJ ǹĴįĶġĬıİĮıįIJ 3.5 mm Phono Plug IJĵġƲıįĶ *Tip positive P1 P1R Standard DC Plug Standard PX Ń Ń ł ń ł P51/P5R P6/P6R P7/P7R P8/P8R P9/P9R ń Right Angle PXR Notes: Locking DC Plug A 5.5 5.5 3.5 3.8 3.8 B 2.1 2.5 1.3 1.35 1.05 C 12 12 9.5 9.5 9.5 Unit mm mm mm mm mm 1. dc plug length for EPS050100-P5P is 9.5 mm ń ł Ń P10 P11 A 5.5 5.5 B 2.1 2.5 C 9.5 9.5 Unit mm mm EIAJ Plugs EIAJ A B P12/P12R EIAJ-1 2.35 0.7 P13/P13R EIAJ-2 4.0 1.7 P14/P14R EIAJ-3 4.75 1.7 Ń ł Ń ł ń ń Standard PXX Right Angle PXXR Ņ Stripped and Tinned ijĶƲĶ DC PLUG TYPE ST stripped and tinned PXX X X Plug type Plug angle: “blank” = standard R = right angle Plug polarity: “blank” = N/A P = center positive N = center negative cui.com C 9.5 9.5 9.5 D NA 5.0 5.0 Unit mm mm mm CUI Inc │ SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY date 06/23/2011 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 06/29/2006 1.01 applied new spec template 12/28/2010 1.02 removed multiple models, applied new spec template 05/26/2011 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.