53TP Series IP20 • Three-phase solid-state relay; Ratings 25A , 50A per phase @ 48-530 VAC • 2 package styles IP20 or IP00 (See IP00 spec sheet for more information) • SCR output for heavy industrial loads • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output • LED input status indicator • Transient protection built in PRODUCT SELECTION Control Voltage 90-140 VAC 180-280 VAC 4-32 VDC 18-36 VAC 25A 50A B53TP25C C53TP25C D53TP25C E53TP25C B53TP50C C53TP50C D53TP50C E53TP50C AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum Load Current per phase [Arms] (3) Minimum Load Current per phase [Arms] Maximum Surge Current 50-60 Hz (16.6ms) [Apk] Maximum 1 Second Surge Current 50/60 Hz [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum I²t for Fusing 50-60 Hz (8.3 msec) [A² sec] Minimum Power Factor (with Maximum Load) 25 A 50 A 48-530 1200 3 500 25 0.1 275-300 85 1.35 0.24 380-370 0.5 48-530 1200 3 500 50 0.1 710-750 150 1.35 .012 2520-2320 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Minimum Input Current (for on-state) Maximum Input Current Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] D53 B53 C53 E53 4-32 VDC 4.0 VDC 1.0 VDC 24 mA 35 mA Current Regulated 8.33 8.33 90-140 VAC 90 10 7.0 mA 16 mA Current Regulated 20 30 180-280 VAC (5) 180 10 7.0 mA 20 mA Current Regulated 20 30 18-36 VAC 18 2 15 mA 20 mA Current Regulated 20 30 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Terminals Input Terminal Screw Torque Range:[in lbs/Nm] Output Terminal Screw Torque Range:[in lbs/Nm] GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heat sinking required, see page 3 for derating curves. 4) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models) 5) Operating temperature for 180-280 VAC input is -40 to +60°C MECHANICAL SPECIFICATIONS Parameters 4000 Vrms 109 Ohm 8 pF -40 to 80°C -40 to 125 °C 12.7 oz (360g) NA Hardware Furnished, mounted 8-10 / 0.9-1.1 15-20 / 1.7-2.2 THERMAL DERATE INFORMATION AGENCY APPROVALS Rev. 041310 ANNEX - ENVIROMENTAL INFORMATION