CattronControl™ Excalibur The Excalibur, part of the CattronControl™ family, is a compact keypad control unit for cranes, lifting equipment and a diverse range of machines. The Excalibur employs advanced dual processor electronics and safety critical software, protected in an ergonomic and robust housing that is well suited for use in aggressive industrial environments. The Excalibur features an external RFID Transkey™, for simple unit configuration, this allows facilities to quickly deploy spare units by simply swapping the RFID Transkey between the operating unit and a spare, so downtime and spares holding are minimized. The Excalibur has several different variants with 6, 8, 10 or 12 dual step push buttons that can be independently configured and set to operate on cranes and machines with up to 5 reversing functions, plus typically, start and horn. An electronic on/off switch and E-Stop, plus optional A-B select with LED confirmation, make the Excalibur a great choice for a wide range of applications where a compact and robust controller is desired. The sleek construction with contoured polymer and integrated rubber bumper make this a tough unit, and the dual step push buttons with good tactile feel make operating the unit a pleasure. There are so many possibilities with its high reliability push buttons, varied RF options, feedback onto the 4 multi-function LEDs, Tandem, multi-crane/machine selection capabilities, RFID Transkey and global compliance, this tough and compact controller is ideal for operation in numerous applications, and operators maintain total freedom of movement for safe and efficient operations. [email protected] +1.724.962.3571 +1.760.737.7800 [email protected] +1.514.908.1659 [email protected] +49.2161.6363.0 [email protected] +44.0.1932.247.511 [email protected] +86.21.3120.0188 [email protected] +27.11.425.1123 [email protected] +55.19.3243.7803 www.lairdtech.com FEATURES FEATURES • For control of cranes and machines with digital or analog drive systems, (digital control) • LEDs for status and feedback • High safety-class through redundant hardware and software architecture • Approvals and frequencies for worldwide deployment • lP65 housing made of high impact-resistant polymer + rubber for tough indoor or outdoor environments • Control up to five dual step drives with the 12 two-step push buttons, plus on/off, E-Stop and (optional) electronic A+B Select • Customer-specific layout and label options • Compatible with a number of machine control units featuring various interface options • System configuration via secure wireless (RFID) Transkey for simplification of spares holding • Tandem and multi-transmitter and/or receiver operation • CE compliant CattronControl™ Excalibur TECHNICAL DATA AND SPECIFICATIONS ELECTRONIC DATA MECHANICAL DATA Commands Weight 6-8 Dimensions 6-8 (L x W x H) Up to 5 dual-step drives, horn, E-stop and optional electronic A/B select switch Digital circuitry Dual-processor technology System addresses 24 bits = 16 million addresses Energy-saving mode Automatic shutdown (configurable 0-30 minutes) Supply voltage Rechargeable battery. NiCd 3.6V/1500mAh Autonomy >12h at 100% uninterrupted use OPERATION AND INDICATION Actuators ct24-ET/6 Actuators ct24-ET/8 6 push buttons (2-step) 8 push buttons (2-step) Actuators ct24-ET/10 Actuators ct24-ET/12 10 push buttons (2-step) 12 push buttons (2-step) Transkey™ System configuration, address and RF channel setting Buzzer Low voltage indication LED 1 status LED 4 multi-function LEDs STANDARDS Safety EN 13849-1 Category 3 PL d EN 60204-1 EN 60204-32 CE Compliant Approx. 290 g ( 0.64 lbs) 180 x 64 x 39 mm (7.1 x 2.5 x 1.6 in) Weight 10-12 Approx. 350 g ( 0.77 lbs) Dimensions 10-12 235 x 64 x 39 mm (L x W x H) (9.3 x 2.5 x 1.6 in) Housing material High-impact polymer and rubber Housing protection rating IP 65 Suitable for outdoor use Operating temperature -20º to +60º C (-4º to +140º F) Vibration and shock Vibration/impact and drop tested to 1m on concrete RF Frequency range 335 MHz 406-419 MHz 433-434 MHz 447-473 MHz 869 MHz 902-927 MHz other frequencies on request Transmission speed 4.8 to 20 kbit/s Transmitter output power 1-10 mW with various modules (within permitted limits) Modulation FM RF channel spacing 12.5 kHz; 25 kHz and others Antenna Internal ACCESSORIES WACS-DS-EXCALIBUR_102314 Batteries 2x Rechargeable batteries 3.6V/1500 mAh Battery charger Processor-controlled charger incl. adapter cradle, charging system on the primary side for international use Labeling Self-adhesive marking labels Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2014 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.