IQD CXOLP-1.8V Crystal clock oscillator specification Datasheet

Crystal Clock Oscillator Specification
CXOLP 1.8V
ISSUE 1; September 2016
Description
CXOLP is an ultra-miniature, low power, fast start-up time,
high shock and low ageing quartz crystal oscillator hermetically
sealed in a ceramic housing.
SM1 Gold Plated (RoHS)
SM4 Solder Plated (RoHS)
FEATURES:
Low current consumption (55μA @ 1MHz)
Fast start-up (1ms typical)
Tight tolerance
High shock resistance (10000G typical)
Low ageing
Hermetically sealed ceramic package
APPLICATIONS:
Military, Aerospace & Avionics
Communications
Battery Operated Devices
Navigation
ICAD Devices
GPS
Industrial, Computer & Communications
Wireless Telemetry
Handheld instrumentation
Transponder/Animal migration
Medical
Patient monitoring
Infusion Pumps
Outline (mm) SM1 = Gold Plated (RoHS)
Frequency Parameters
1.0MHz to 8.5MHz
Frequency
±25.00ppm
Frequency Tolerance
Tolerance Condition
@ 25°C
±10.00ppm to ±100.00ppm
Frequency Stability
Ageing
±2ppm max in 1st year
Note: Other Frequency Tolerances are available - please
contact an IQD sales office
Electrical Parameters
1.8V ±10%
Supply Voltage
Supply Voltage (absolute maximum rating): -0.5V to 5.0V
Supply Current (@ 1.8V):
2MHz (@ 25°C and load=5pF): 65μA typ
4MHz (@ 25°C and load=5pF): 115μA typ
8MHz (@ 25°C and load=5pF): 210μA typ
Please note that all data is only valid at 25°C unless otherwise
stated.
Operating Temperature Ranges
-10 to 70°C
-40 to 85°C
-55 to 125°C
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 12 Sep 16 12:41 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 1 of 3
Crystal Clock Oscillator Specification
CXOLP 1.8V
Output Details
Output Compatability
CMOS
Drive Capability
5pF
Note: Other output loads available - please contact IQD sales
office.
Output Levels:
Output High Voh: 90%Vs min
Output Low Vol: 10%Vs max
Rise Time (@ 3.3V, 5pF//1MΩ load): 5.5ns typ
Fall Time (@ 3.3V, 5pF//1MΩ load): 5.0ns typ
Output Control
Start Up Time: 1ms typ
Environmental Parameters
Storage Temperature Range: –55 to 125°C
Shock: 10000G, 0.3ms, 1/2 sine
Higher Shock available - please contact IQD sales office.
Vibration: per MIL-STD-202G, Method 204D. Cond.D, 20G,
10Hz-2000Hz swept sine
Manufacturing Details
Maximum Process Temperature: 260°C max (for 20s max)
Ordering Information
Frequency*
Model*
Supply Voltage*
Termination Variant*
Output
Frequency Tolerance (@ 25°C)*
Operating Temperature Range*
Pad 3 Function*
(minimum required*)
Termination Variants:
SM1 = Gold Plated (RoHS)
SM4 = Solder Plated (RoHS)
Example
2MHz CXOLP 1.8V SM1
CMOS ±50ppm –40 to 85C NC
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Compliant
Compliant
Not Applicable
Packaging Details
Pack Style: Reel
Pack Size: 1,000
Tape & reel in accordance with EIA-481-D
Pack Style: Tray
Pack Size: 1
Supplied on a tray
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 12 Sep 16 12:41 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 2 of 3
Crystal Clock Oscillator Specification
CXOLP 1.8V
Electrical Specification - maximum limiting values 1.8V ±10%
Duty Cycle
Stability
Current
Draw
Rise and Fall
Time
°C
ppm
mA
ns
%
-10 to 70
±10.0
-
-
40/60%
-40 to 85
±20.0
-
-
40/60%
-55 to 125
±40.0
-
-
40/60%
Frequency
Min
Frequency
Max
Temperature
Range
1.0MHz
8.5MHz
This document was correct at the time of printing; please contact your local sales office for the latest version.
Click to view latest version on our website.
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 12 Sep 16 12:41 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 3 of 3
Similar pages