FAST / TTL Logic Triple & Quad Delays 14-Pin DIP & SMD FAIXD - XXX X Part Number Description GENERAL: For Operating Specifications and Test Conditions, see Tables I and VI on page 5 of this catalog. Delays specified for the Leading 14-Pin Logic Buffered Multi-Line Delays: FAI3D, FAI4D Edge. Delay Per Line in nanoseconds (ns) Minimum Input Pulse Width ...................................... 100% of total delay Operating Temp. Range .................................................... 0OC to +70OC Temperature Coefficient ............................................ 800ppm/OC typical Supply Current, ICC : FAI3D ............................ 45 mA typ., 95 mA max. FAI4D .......................... 65 mA typ., 130 mA max. Electrical Specifications at 25OC FAST Buffered Multi-Line Delay (ns) Triple P/N Quadruple P/N Lead Style: Blank = Auto-Insertable DIP G = “Gull Wing” Surface Mount J = “J” Bend Surface Mount Examples: FAI4D-20 = 20ns Quadruple 74F Buffered, DIP FAI3D-5G = 5ns Triple 74F Buffered, G-SMD Quad 14-Pin Schematic OUT1 Vcc 14 13 1 2 IN 1 12 OUT 2 OUT 3 OUT 4 Vcc OUT 1 OUT 2 OUT 3 9 14 12 10 8 11 10 3 4 5 IN 2 IN 3 IN 4 4 ± 1.00 5 ± 1.00 6 ± 1.00 7 ± 1.00 8 ± 1.00 10 ± 1.50 15 ± 2.00 16 ± 2.00 20 ± 2.00 25 ± 2.00 30 ± 2.00 50 ± 2.50 Triple 14-Pin Schematic 8 6 7 1 3 5 7 GND IN 1 IN 2 IN 3 GND FAI3D-4 FAI4D-4 FAI3D-5 FAI4D-5 FAI3D-6 FAI4D-6 FAI3D-7 FAI4D-7 FAI3D-8 FAI4D-8 FAI3D-10 FAI4D-10 FAI3D-15 FAI4D-15 FAI3D-16 FAI4D-16 FAI3D-20 FAI4D-20 FAI3D-25 FAI4D-25 FAI3D-30 FAI4D-30 FAI3D-50 FAI4D-50 Dimensions in Inches (mm) .285 (7.24) MAX. .785 (19.94) MAX. .250 .020 (6.35) (0.51) MAX. DIP (Default, FAI4D-XX) .120 (3.05) MIN. .050 (1.27) TYP. .020 (0.51) TYP. .250 (6.35) MAX. .015 (0.38) TYP. .120 (3.05) MIN. .020 (0.51) TYP. .100 (2.54) TYP. J-SMD (FAI4D-XXJ) .050 (1.27) TYP. .010 (0.25) TYP. .430 (10.92) .400 (10.16) .020 (0.51) TYP. .100 (2.54) TYP. Specifications subject to change without notice. .050 (1.27) TYP. .200 (5.08) TYP. J-SMD (FAI3D-XXJ) .285 (7.24) .260 (6.60) .330 (8.38) MAX. .020 R (0.51) .020 (0.51) TYP. For other values & Custom Designs, contact factory. 21 .250 (6.35) MAX. .015 (0.38) TYP. .785 (19.94) MAX. .265 (6.73) MAX. .030 (0.76) TYP. .200 (5.08) TYP. G-SMD (FAI3D-XXG) .285 (7.24) MAX. .785 (19.94) MAX. .050 (1.27) TYP. .785 (19.94) MAX. .008 R (0.20) .030 (0.76) TYP. .250 .020 (6.35) (0.51) MAX. .010 (0.25) TYP. MAX. .050 (1.27) TYP. Rhombus Industries Inc. .300 (7.62) .285 (7.24) G-SMD (FAI4D-XXG) .020 (0.51) TYP. DIP (Default, FAI3D-XX) .008 R (0.20) .365 (9.27) MAX. .100 (2.54) TYP. .785 (19.94) MAX. .020 (0.51) TYP. .785 (19.94) MAX. .050 (1.27) TYP. .200 (5.08) TYP. .265 (6.73) MAX. .030 (0.76) TYP. FAI34D 1/98 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 • Fax: (714) 896-0971