Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 20A DUAL FAST EFFICIENT GLASS PASSIVATED RECTIFIER FEF200-02CT THRU FEF200-06CT CASE : ITO-220AB ( FEF200-XX) , FULLY INSULATED PACKAGE B O J C K B C D E F G H I J K L M O D 1 2 3 F H E M I PIN 1 G PIN 3 PIN 2 CASE FEATURES z GLASS PASSIVATED CHIP JUNCTION z LOW FORWARD VOLTAGE z LOW THERMAL RESISTANCE z HIGH CURRENT CAPABILITY z HIGH VOLTAGE MILLIMETERS MIN MAX 9.72 10.27 6.30 6.90 14.50 15.50 13.00 13.80 4.1 2.41 2.67 1.52 0.9 4.8 3.1 2.5 2.9 0.8 Ø 3.4 L MECHANICAL DATA z CASE: TRANSFER MOLDED z TERMINAL: MIL-STD-202F METHOD 2026 z POLARITY: AS MARKED z EPOXY: UL94V-0 FLAME RETARDANT MOLDING COMPOUND z MOUNTING POSITION: ANY z WEIGHT: 2.05 GRAMS MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL FEF200-02CT FEF200-04CT FEF200-06CT UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT SEE FIG.1 PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) TYPICAL THERMAL RESISTANCE (NOTE 2) VRRM VRMS VDC IO 200 140 200 400 280 400 20.0 600 420 600 V V V A CJ 65 PF Rθjc 2.2 ℃/W STORAGE TEMPERATURE RANGE TSTG - 55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP - 55 TO + 150 ℃ IFSM 200 A ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL FEF200-02CT MAXIMUM FORWARD VOLTAGE AT 10A PER LEG VF 0.98 MAXIMUM DC REVERSE CURRENT AT TA=25°C IR MAXIMUM DC REVERSE CURRENT AT TA=100°C IR MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR NOTES: 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. THERMAL RESISTANCE JUNCTION TO CASE PER LEG MOUNTED ON HEAT SINK 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A FEF200-02CT THRU FEF200-06CT FEF200-04CT FEF200-06CT UNITS 1.25 10 100 25 1.90 V μA μA nS Page: 1 RATINGS AND CHARACTERISTIC CURVE FEF200-02CT THRU FEF200-06CT FIG. 1 -TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 10Ω NO INDUCTIVE 50Ω NO INDUCTIVE Trr (-) +0.5A D.U.T. PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 1Ω NON INDUCTIVE (-) OSCILLOSCOPE ( NOTE 1 ) 0 -0.25A (+) -1.0A NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10 ns MAX. SOURCE IMPEDANCE=50 OHMS 1cm SET TIME BASE FOR 10/20 ns/cm FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 2 -MAXIMUM FORWARD CURRENT DERATING CURVE 20 16 12 8 4 Single Phase Half Wave 60Hz Resistive or Inductive Load 0 25 50 75 100 125 150 175 INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD RECTIFIED CURRENT (A) 100.0 FEF200-02CT 10.0 FEF200-04CT .1 TJ=25oC Pulse Width=300us 1% Duty Cycle .01 AMBIENT TEMPERATURE ( C) .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE (V) FIG. 4 -TYPICAL REVERSE CHARACTERISTICS FIG. 5 -TYPICAL JUNCTION CAPACITANCE o 2.2 200 1000 100 JUNCTION CAPACITANCE (pF) INSTANTANEOUS REVERSE CURRENT (uA) FEF200-06CT 1.0 100 10 TJ=125oC TJ=80oC 1 TJ=25oC 0.1 40 20 10 TJ=25oC 6 4 2 1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) .1 .2 .4 1.0 2 4 10 20 40 REVERSE VOLTAGE (V) FEF200-02CT THRU FEF200-06CT Page: 2 100