AAC CRL16R20FQB Low ohm surface mount chip resistor Datasheet

CURRENT SENSE RESISTORS
The content of this specification may change without notification 09/24/08
CRL Series - Low Ohm Surface Mount Chip Resistors
Custom solutions are available.
HOW TO ORDER
CRL10
R020
J
N
M
Packaging
M = Tape/Reel
B = Bulk
TCR (PPM/°C)
K=+100
L=+200
O=+400
Q=+600
FEATURES
„ Resistance Tolerances as low as +1%
N=+300
„ TCR as low as + 100ppm
„ Wrap Around Terminal for Flow Soldering
Tolerance (%)
F = +1
G = +2
J = +5
„ Anti-Leaching Nickel Barrier Terminations
„ RoHS Compliant
EIA Resistance Value
Standard decade values
Series Size
CRL05 = 0402
CRL16 = 0603
CRL10 = 0805
CRL18 = 1206
CRL14 = 1210
DERATING CURVE
„ Applicable Specifications: EIA575,
MIL-R-55342F, and CECC40401
CRL12 = 2010
CRL01 = 2512
CRL01P = 2512
CRL1S = 3720
CRL02 = 7520
DIMENSIONS (mm)
Size
0402
0603
0805
1206
1210
2010
2512
2512-P
3720
7520
L
1.00 + 0.05
1.60 + 0.10
2.00 + 0.15
3.10 + 0.15
3.20 + 0.20
5.00 + 0.15
6.30 + 0.15
6.30 + 0.20
3.75 + 0.20
7.50 + 0.20
W
0.50 + 0.05
0.80 + 0.10
1.25 + 0.15
1.55 + 0.15
+ 0.20 – 0.10
2.50
2.50 + 0.15
3.10 + 0.15
3.20 + 0.20
2.00 + 0.20
2.00 + 0.20
D1
0.25 + 0.10
0.30 + 0.20
0.30 + 0.20
0.50 + 0.30
0.50 + 0.20
0.60 + 0.30
0.60 + 0.30
0.70 + 0.30
0.40+ 0.20
0.40+ 0.20
D2
0.20 + 0.10
0.30 + 0.20
0.30 + 0.20
0.40 + 0.20
0.50 + 0.20
0.50 + 0.25
0.50 + 0.25
2.20 + 0.20
0.40 + 0.20
0.40 + 0.20
Tt
0.32 + 0.05
0.45 + 0.10
0.50 + 0.10
0.60 + 0.10
0.60 + 0.10
0.60 + 0.10
0.60 + 0.10
0.60 + 0.10
0.60 + 0.10
0.60 + 0.10
0402
0603
0805
1206
1210
2010
2512
2512-P
3720
7520
±1, ±2, ±5
±1, ±2, ±5
±1, ±2, ±5
±1, ±2, ±5
±1, ±2, ±5
±1, ±2, ±5
±1, ±2, ±5
±1, ±2, ±5
±1, ±2, ±5
±1, ±2, ±5
±600
0.020 ~ 0.050
0.020 ~ 0.050
Max TCR (ppm/°C) Per Resistance Range in Ω
±400
±300
±200
0.021 ~ 0.049
0.050 ~ 0.910
0.021 ~ 0.049
0.050 ~ 0.910
0.021 ~ 0.049
0.050 ~ 0.910
0.021 ~ 0.049
0.050 ~ 0.910
0.100 ~ 0.18
0.021 ~ 0.049
0.050 ~ 0.910
0.021 ~ 0.049
0.050 ~ 0.910
±100
0.200 ~ 1.00
0.100 ~ 1.00*
0.010 ~ 0.050
0.001 ~ 0.010
Rated
Power
1/16 W
1/8 W
1/4 W
1/2 W
1/2W
3/4 W
1W
2W
1W
2W
Operating Temp. Range is
-55°C ~ + 150°C
Tolerance
(%)
Operating Current I = √(P/R)
Size
Operating Voltage V = √(P*R)
ELECTRICAL CHARACTERISTICS
PERFORMANCE
Item
Temp. Coefficient of Resistance
Short Time Overload
Dielectric Withstand Voltage
Insulation Resistance
Thermal Shock
Load Life
Humidity (Stable State)
Resistance to Dry Heat
Low Temperature Operation
Bending Strength
Solderability
Resistance to Soldering Heat
American Accurate Components, Inc.
Specification
As Spec
±(0.5% + 0.05Ω)
By type
>1000M Ω
±(0.5% + 0.05Ω)
±(1% + 0.05Ω)
±(1% + 0.05Ω)
±(0.5% + 0.05Ω)
±(0.5% + 0.05Ω)
±(0.5% + 0.05Ω)
95% min. Coverage
±(0.5% + 0.05Ω)
Test Method
MIL-STD-202F, Method 304 304 +25/-55/+25/+125/+25°C
JIS-C-5202-5.5 RCWV*2.5orMax Overloading Voltage 5 seconds
MIL-STD-202F, Method 301 Apply Max Overload Voltage for 1 minute
MIL-STD-202F, Method 302 Apply 100VDC for 1 minute
MIL-STD-202F, Method 107G -55°C ~ + 150°C, 100 cycles
MIL-STD-202F, Method 108A RCWV 70°C, 1.5 hrs ON, 0.5 hrs off, 1000 ~ 1048 hrs
MIL-STD-202F, Method 103B 40°C, 90~95%RH , RCWV 1.5 hrs ON, 0.5 hrs OFF, total 1000 ~ 1048 hrs
JIS-C-5202 7.2 96 hours @ +125°C without load
JIS-C-5202 7.1 1 hour, -65°C followed by 45 minutes if RCWV
JIS-C-5202 6.1.4 Bending Amplitude 3mm for 10 seconds
MIL-STD-202F, Method 208H 235°C±5°C, 2±0.5 (sec)
MIL-STD-202F, Method 210E 260±5°C ,10±1second
188 Technology Drive, Unit H, Irvine, CA 92618
TEL: 949-453-9888 Š FAX: 949-453-8889
1