EF10C01CF THRU EF10C06CF Glass Passivated Efficient Fast Recovery Rectifier Voltage Range 50 to 600 V Current 10.0 Ampere Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability Mechanical Data Case: Molded plastic ITO-220AB Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 guranteed Mounting position: Any Weight: 1.73 gram ITO-220AB .185(4.70) .175(4.44) MAX.412(10.5) DIA .140(3.56) .130(3.30) .140(3.56) .130(3.30) .594(15.1) .587(14.9) PIN .108(2.75) .098(2.50) 1 2 .125(3.18) .115(2.92) .131(3.39) .122(3.08) .27(6.86) .23(5.84) YENYO 3 .053(1.35) .045(1.15) .560(14.20) .492(12.50) .160(4.06) .140(3.56) .026(0.65) .022(0.55) .136(3.45) .110(2.80) .025(0.64) .014(0.35) .105(2.67) .095(2.41) 1 2 3 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL EF10C01CF EF10C02CF EF10C03CF EF10C05CF EF10C06CF UNIT PARAMTER Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 V Maximum RMS Voltage VRMS 35 70 140 280 420 V VDC 50 100 200 400 600 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TC=100 C IF(AV) 10.0 A IFSM 100 A Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 5.0 A 0.95 VF o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR 1.25 uA 250 uA nS Trr 25 Typical junction Capacitance (Note 2) CJ 65 Operating Junction and Storage Temperature Range V 10.0 Maximum Reverse Recovery Time (Note 1) Typical Thermal Resistance (Note 3) 1.85 R JC 2.2 TJ, TSTG -55 to + 150 pF o CW o C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to lead. 1/2 R3, MAY-12 RATINGS AND CHARACTERISTIC CURVES EF10C01CF THRU EF10C06CF FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 100 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 10.0 8.0 6.0 4.0 2.0 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 80 60 40 20 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o CASE TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 EF10C01CF-EF10C03CF 1.0 EF10C05CF EF10C06CF 1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 o TJ=125 C 100 10 1 o TJ=25 C 0.1 0 2.0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 2/2 R3, MAY-12