Product Guide 1101W Series Standard Type Flat Lens SMT LED ■ Features ■ Applications • Flat lens type with a wide viewing angle of 150° • Excellent for backlighting LCDs and indicators • Computer / Telecommunications • Industrial / Medical • Audio visual equipment ■ Outline Dimensions Unit: mm Tolerances + 0.2 ■ Electro-Optical Characteristics Type No. Material Emitted Color Lens Color (Ta=25°C) Luminous Intensity IV MIN. TYP. Forward Voltage V Wavelength IF Peak λp TYP. Spectral Line Dominant Half Width λd λ ∆λ TYP. TYP. F IF TYP MAX. Reverse Viewing Current IR Angle IF MAX. VR BR1101W GaAIAs Red 4.4 12.8 20 660 647 30 20 1.7 2.0 20 100 4 AA1101W GaAsP Orange 2.8 5.6 20 605 606 30 20 2.2 2.5 20 100 4 AY1101W GaAsP Yellow PY1101W GaP Yellow Green PG1101W GaP BG1101W GaP 4.0 20 580 590 30 20 2.2 2.5 20 100 4 4.0 8.0 20 570 572 30 20 2.1 2.5 20 100 4 Green 2.4 4.8 20 560 567 30 20 2.1 2.5 20 100 4 Pure Green 0.7 2.0 20 555 558 30 20 2.1 2.5 20 100 4 mA V mA µA V Units Water Clear 2.0 mcd mA nm (2 θ 1/2) 150° Deg. ■ Absolute Maximum Ratings Red (Ta=25°C) Orange Yellow Item Yellow Green Green Pure Green Units Symbol BR AA AY PY PG BG Pd 60 75 75 75 75 75 mW Forward Current IF 30 30 30 30 30 30 mA Peak Forward Current IFM 70 70 70 70 70 70 mA Reverse Voltage VR 4 4 4 4 4 4 V Power Dissipation Operating Temperature Topr -30 to +85 °C Storage Temperature Tstg -40 to +100 °C ∆IF 0.42 (DC) 0.93 (Pulse) mA/°C Derating* * Ta=25°C, IFM applies for the pulse width ≤ 1msec. and duty cycle ≤1/20. ■ Operation Current Derating Chart (DC) 1.75 + 0.1 ■ Taping Specifications 4+0.1 φ 1.5 +0.1 0 (0.2) Center Hole BR, AA, AY, PY, PG, BG 3.5 + 0.05 2+0.05 ( φ 1.1) Quantity on tape: 2,500 pieces per reel (3.35) 8+0.2 (1.8) (1.7) 2+0.5 φ 21+0.8 4+0.1 Direction to pull +1 φ 60 -0 φ 13+0.2 φ 13+0.2 9+0.3 11.4+1 +0 φ 180 3 ■ Precautions Please follow these handling precautions to prevent damage to the chip and ensure its reliability. 1. Soldering conditions: • Soldering iron: Temperature at tip of iron: 280°C max. (30W max.) Soldering time: 3 sec. max. • Dip soldering: Preheating: 120 ~ 150°C max. (resin surface temp.) 60 ~ 120 sec. max. Bath temperature: 260°C max. Dipping Time: 5 sec. max. • Reflow Soldering: °C Operation Heating 240 150 Pre-heating ~ LED Surface Temperature ■ Spatial Distribution Temperature rise: 5°C/sec. Cooling: —5°C/sec. 120 0 60 to 120 sec. 5 sec. max 2. Cleaning: • If cleaning is required, use the following solutions for less than 1 minute, at less than 40°C. • Appropriate chemicals: Ethyl alcohol and isopropyl alcohol. • Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as the oscillator output, size of PCB and LED mounting method. The use of ultrasonic cleaning should be enforced at proper output after confirming there is no problem. Product specifications subject to change without notice. PG1101W-0301 Stanley Electric Sales of America, Inc. 2660 Barranca Parkway, Irvine, CA 92606 • Tel: 800-LED-LCD1 (533-5231) • Fax: 949-222-0555 Website: www.stanley-electric.com