EP13 Series EP13 • RoHS Compliant (Pb-free) • EPO™ Programmable Oscillators • 3.3V supply voltage • 14 pin DIP package • HCMOS output • Stability to 50ppm • Custom lead length, gull wing options available H 5.08 W 20.8 L 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 106.250MHz Operating Temperature Range -20°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 3.3VDC ±0.3VDC Input Current 28mA Maximum (Unloaded) Disable Current (TS Option) 16mA Maximum (Pin 1=Ground) Standby Current (PD Option) Frequency Tolerance / Stability 20µA Maximum (Pin 1=Ground) Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm or ±50ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration Output Voltage Logic High (VOH) w/HCMOS Load VDD-0.4VDC Minimum IOH=-8mA Output Voltage Logic Low (VOL) w/HCMOS Load 0.4VDC Maximum Rise Time / Fall Time 20% to 80% of waveform w/HCMOS Load 4 nSeconds Maximum Duty Cycle at 50% of waveform w/HCMOS Load 50 ±10(%) (Standard) at 50% of waveform w/HCMOS Load (<50.000MHz Only) 50 ±5(%) (Optional) <50.000MHz 30pF HCMOS Load Maximum >50.000MHz 15pF HCMOS Load Maximum TS Tri-State PD Power Down Load Drive Capability Output Control Function Output Control Function Input Voltage VIH: No Connection or >70% of VDD IOL=+8mA Enables Output VIL: (TS Option) <20% of VDD Disable Output: High Impedance VIL: (PD Option) <20% of VDD Disable Output: Logic Low Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10 mSeconds Maximum RMS Jitter Peak to Peak Jitter <12.000MHz 50pSec Maximum, 15pSec Typical >12.000MHz 13pSec Maximum, 10pSec Typical <12.000MHz 500pSec Maximum, 100pSec Typical >12.000MHz 100pSec Maximum, 60pSec Typical MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP13 14 pin DIP 3.3V OS44 12/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EP13 00 ET T TS - 24.000M - CL125 FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) OPERATING TEMP. RANGE Blank=-20°C to 70°C or ET=-40°C to 85°C FREQUENCY DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) OUTPUT CONTROL FUNCTION TS=Tri-State, PD=Power Down NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State or Power Down Pin 7: Ground/Case Ground Pin 8: Output Pin 14: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EP13 TS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Output Control Function PD = Power Down TS = Tri-State Enable High Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Series Designator Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP13 14 pin DIP 3.3V OS44 12/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.