• 5 WATTS OUTPUT POWER • 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE • INTERNATIONAL SAFETY STANDARD APPROVAL • SIX-SIDED CONTINUOUS SHIELD • HIGH EFFICIENCY UP TO 83% • STANDARD 2” X 1” X 0.4” PACKAGE • FIXED SWITCHING FREQUENCY The FDC05 and FDC05-W series offer 5 watts of output power from a 2 x 1 x 0.4 inch package without derating to 71ºC ambient temperature. FDC05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. FDC05-W series have 4:1 ultra wide input voltage of 9-36 and 18-75VDC. The FDC05 and FDC05-W features 1600VDC of isolation, short-circuit protection, as well as six sided shielding. The safety approve with EN60950 and UL1950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. According the extended operation temperature range, there are “M1” and “M2” version for special application. UL E193009 TUV R3-50007936 CB JPTUV-003641 CE MARK T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS Output power 5 Watts max Voltage accuracy Full load and nominal Vin ± 2% Minimum load (Note 1) 10% of FL Line regulation LL to HL at Full Load ± 0.2% Load regulation 10% to 100% FL Single Dual ± 0.2% ± 1% Cross regulation (Dual) Asymmetrical load 25% / 100% FL Ripple and noise Transient response recovery time 25% load step change Over load protection % of FL at nominal input Isolation capacitance Switching frequency 300pF, max Standard “W” series Approvals and standard 300KHz, typ 200KHz, typ IEC60950, UL1950, EN60950 Non-conducted black plastic Single 200uS Dual 200uS Potting material Epoxy (UL94-V0) 2.00 X 1.00 X 0.40 Inch (50.8 X 25.4 X 10.2 mm) Dimensions 170% typ Weight 27g (0.95oz) 3.145 x 106 hrs MTBF (Note 4) 12V nominal input 24V nominal input 48V nominal input FDC05-W 24V nominal input 48V nominal input Input filter Start up time 10 ohms, min Base material Continuous, automatics recovery 9 – 18VDC 18 – 36VDC 36 – 75VDC 9 – 36VDC 18 – 75VDC Pi type 12V input 24V input 48V input Input reflected ripple (Note 2) 9 Isolation resistance I0.02% / ºC, max FDC05 Input surge voltage 100mS max 36VDC 50VDC 100VDC Nominal Vin and full load Nominal Vin and constant resistor load Remote ON/OFF (Note 3) (Positive logic) DC-DC ON DC-DC OFF (Negative logic) DC-DC ON DC-DC OFF Remote off input current Nominal Vin 1600VDC, min Nickel-coated copper INPUT SPECIFICATIONS Input voltage range See table Input to Output to Case 50mVp-p FL to 1/2 FL I1% error band Short circuit protection Isolation Voltage Case material 20MHz bandwidth Temperature coefficient ± 5% Efficiency 20mAp-p 600mS typ ENVIRONMENTAL SPECIFICATIONS Standard -25ºC ~ +85ºC (with derating) Operating temperature range M1 (Note 5) -40ºC ~ +85ºC (non-derating) (Reference derating curve) M2 (W series) -40ºC ~ +85ºC (with derating) Maximum case temperature +100ºC Storage temperature range -55ºC ~ +105ºC Nature convection Thermal impedance (Note 6) Nature convection with heat-sink Thermal shock MIL-STD-810D Vibration 10~55Hz, 2G, 30minutes along X,Y and Z Relative humidity Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V Short or 0V < Vr < 1.2V Open or 3.5V < Vr < 12V 2.5mA 12ºC/watt 10ºC/watt 5% to 95% RH EMC CHARACTERISTICS Conducted emissions EN55022 Level A Radiated emissions EN55022 Level A ESD EN61000-4-2 Perf. Criteria2 Radiated immunity EN61000-4-3 Perf. Criteria2 Fast transient EN61000-4-4 Perf. Criteria2 Surge EN61000-4-5 Perf. Criteria2 Conducted immunity EN61000-4-6 Perf. Criteria2 (8) Model Number Input Range Output Voltage Output Current Input (7) Current Eff (%) Capacitor (9) Load max FDC05-12S33 FDC05-12S05 FDC05-12S12 FDC05-12S15 FDC05-12D05 FDC05-12D12 FDC05-12D15 FDC05-24S33 (W) FDC05-24S05 (W) FDC05-24S12 (W) FDC05-24S15 (W) FDC05-24D05 (W) FDC05-24D12 (W) FDC05-24D15 (W) FDC05-48S33 (W) FDC05-48S05 (W) FDC05-48S12 (W) FDC05-48S15 (W) FDC05-48D05 (W) FDC05-48D12 (W) FDC05-48D15 (W) 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 387mA 556mA 610mA 658mA 595mA 597mA 609mA 199 (196mA) 282 (274mA) 305 (301mA) 325 (325mA) 289 (289mA) 295 (295mA) 308 (301mA) 100 (100mA) 145 (149mA) 151 (151mA) 160 (163mA) 149 (149mA) 149 (149mA) 154 (154mA) 75 79 81 80 74 81 82 73 (74) 78 (80) 81 (82) 81 (81) 76 (76) 82 (82) 81 (83) 73 (73) 76 (74) 82 (82) 82 (81) 74 (74) 81 (81) 81 (81) 3700uF 1700uF 290uF 188uF ± 850uF ± 140uF ± 47uF 3700uF 1700uF 290uF 188uF ± 850uF ± 140uF ± 47uF 3700uF 1700uF 290uF 188uF ± 850uF ± 140uF ± 47uF Note The FDC05 (W) series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification Simulated source impedance of 12uH. 12uH inductor on series with + Vin. The ON/OFF control is option function. There are positive logic and negative logic. The pin voltage is referenced to negative input To order positive logic ON-OFF control add the suffix-P (Ex: FDC05-24S05-P) To order negative logic ON-OFF control add the suffix-N (Ex: FDC05-24S05-N) BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and M2 version. Heat sink is optional and P/N: 7G-0020A. Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. FDC05-48S05 Derating Curve FDC05-48S05-M1 Derating Curve 100 75 50 Nature convection 25 0 -40 -25 -10 0 AMBIENT TEMPERATURE (ºC) 100 75 50 Nature convection 25 0 -40 -25 -10 0 50 60 70 80 90 100 AMBIENT TEMPERATURE (ºC) 50 Nature convection 25 50 60 70 80 90 100 0.50 (12.7) 0.40 (10.2) 0.40 (10.2) 3 4 5 Bottom View 1 2 6 FDC05-48S05 Efficiency VS Output load 82 81 80 79 78 77 76 75 70 65 45 0.05 COMMON - OUTPUT CTRL (Option) 1.00(25.4) 75 AMBIENT TEMPERATURE (ºC) EFFICIENCY (%) OUTPUT POWER (%) FDC05-48S05 Derating Curve With HEAT-SINK (Note5) + INPUT - INPUT + OUTPUT 100 0 -40 -25 -10 0 50 60 70 80 90 100 DUAL OUTPUT + INPUT - INPUT + OUTPUT NO PIN - OUTPUT CTRL (Option) DIA. 0.04(1.0) OUTPUT POWER (%) 6. 7. 8. 9. SINGLE 1 2 3 4 5 6 0.40 (10.2) 0.80(20.3) 5. PIN CONNECTION PIN 0.60(15.2) 4. 2.00(50.8) 2. 3. OUTPUT POWER (%) 1. 0.10(2.5) 0.20(5.1) 0.2 0.4 0.6 OUTPUT LOAD (A) 0.8 1.0 1. All dimensions in Inches (mm) 2. Pin Pitch tolerance I0.014(0.35) 0.22(5.6)