Housings, Power and Signal Cables, Connector Adapters Housing E1341-01 (For E5859 series socket assemblies) The E1341-01 is a metal housing designed for 51 mm (2") diameter head-on photomultiplier tubes operated at room temperature. The E1341-01 ensures complete light-shielding and also accommodates a magnetic shield case (E989-62 sold separately). The E1341-01 housing can be easily attached to a monochromator by preparing a simple adapter. The Copal No. 3 shutter can be directly attached to the E1341-01. TACCF0177 70 M61 P=0.75 10 4-M2, L=8 (HEX SCREW) 183.0 ± 0.5 M61 P=0.75 CUSHION MOUNT FLANGE (SUPPLIED) 3 7 8 52 3 70 61.35 69 CAP (SUPPLIED) MOUNT RING 83 10 70 Dimensional Outlines (Unit: mm) M61 P=0.75 4-M3.2 GND TERMINAL O-RING TACCA0228EB Power and Signal Cables E1168 Series, Connector Adapters A4184 Series Hamamatsu offers the E1168 series cables for connection of photomultiplier tube assemblies and their accessories. A variety of cables are available, for handling high voltage, low voltage and signals. In addition, Hamamatsu also provides the A4184 series connector adapters designed for SHV/MHV connector conversion. TACCF0153 ● For Signal Selection Guide MHV-P—MHV-P E1168 RG-59B/U (Red) Impedance 3D-2V 50 Ω E1168-03 3C-2V 75 Ω BNC-P—BNC-P E1168-05 3D-2V 50 Ω BNC-P—BNC-P E1168-01 Type. No. Cable Type Cable Diameter Maximum Voltage Connector Types E1168-10 Cable Type Type. No. ● For High Voltage 6.2 mm 2.3 kV MHV-P—SHV-P E1168-02 SHV-P—SHV-P E1168-18 MHV-P—MHV-P Type. No. Connector Types SHV-P—SHV-P A4184-02 MHV Plug—SHV Jack MHV-P—SHV-P A4184-03 SHV Plug—MHV Jack 5 kV ● For Low Voltage N-P—N-P N-P—BNC-P ● Connector Adapters E1168-17 Custom 6.15 mm E1168-19 High Voltage ±0.3 mm E1168-20 Cable (Red) Connector Types ● Relay Adapters Type. No. Cable Type Connector Types Type. No. E1168-13 MVVS 3 × 0.3 MC-032—MC-032 A5074 SHV Jack—SHV Jack E1168-14 MVVS 2 × 0.3 SR30-10PQ-4P—SR30-10PQ-4P A7992 BNC Jack—BNC Jack Connector Types 107