Hamamatsu C7181 Detector head for back-thinned ccd area image sensor Datasheet

IMAGE SENSOR
CCD multichannel detector head
C7180, C7181
Detector head for back-thinned CCD area image sensor
C7180 and C7181 are high-sensitivity multichannel detector heads designed for 512 × 512 pixel, back-thinned FFT-CCD area image sensors
(S7170-0909, S7171-0909). C7180 works with non-cooled type back-thinned CCD area image sensor (S7170-0909) and C7181 with one-stage
thermoelectrically cooled type (S7171-0909). Both C7180 and C7181 have a low noise driver/amplifier circuit that operates the CCD image
sensor by input of simple external signals.
C7181 also includes a highly stable temperature controller that cools the sensor to a preset temperature level (Ts= -10 ˚C) as soon as the power
is turned on. If the cooler fails and causes internal circuitry to overheat, the built-in protection circuit automatically turns off the power. Despite its
compact size, the housing configuration is designed for good heat dissipation, and threaded mounting holes on the front panel allow connections
to other devices such as monochrometers. Controller for multichannel detector head C7557 is also available. The software supplied with the
C7557 allows easy control of the multichannel detector head and data acquisition.
Features
Applications
l Designed for back-thinned CCD area image sensor
*1
C7180: for non-cooled type (S7170-0909)
C7181: for TE-cooled type (S7171-0909)
l Choice of line binning operation*2/area scanning operation
l Built-in driver circuit
l Highly stable temperature controller (C7181)
Cooling temperature: fixed at Ts= -10 ± 0.05 ˚C
l Operates with simple input signals
l High UV sensitivity and high quantum efficiency
l Compact configuration
l Scientific measurement instrument
l Semiconductor inspection
l UV imaging
l Biophoton observation
■ Selection guide
The table below shows CCD area image sensors applicable for C7180, C7181.
Since C7180, C7181 do not include a CCD area image sensor, so select the desired sensor and order it separately.
CCD area image sensor
Type No.
Type No.
Cooling
Number of pixels
Number of
active pixels
Active area
[mm (H) × mm (V)]
C7180
S7170-0909
Non-cooled
532 × 520
512 × 512
12.288 × 12.288
C7181
S7171-0909
One-stage
TE-cooled
532 × 520
512 × 512
12.288 × 12.288
Note) Multichannel detector head C7182 designed for 512 × 512 pixel, two-stage TE-cooled CCD area image sensor (S7172-0909) is
also available.
*1: In normal CCD image sensors that receive light from the front surface, the active area is covered with transparent electrodes for
charge transfer. These electrodes cut off UV radiation incident on the image sensor and also reduce the quantum efficiency. In
contrast, back-thinned CCD image sensors have a unique structure in which the back of the active area is finely ground to allow
light to enter from the back surface. This structure ensures high UV sensitivity and quantum efficiency because incident light need
not pass through the transparent electrodes.
*2: The FFT-CCD was originally designed as a two-dimensional image sensor. However, it can be operated like a linear image sensor
having a large active area by transferring all the pixel signals in the vertical direction to the horizontal register (this is referred to as
line binning).
1
CCD multichannel detector head
■ Specifications (C7181)
·External input signal : HCMOS; clock signal, scan setting signal
·External control signal : HCMOS; gain switching, cooling ON/OFF
·Analog signal
: video signal (0 to +10 V), cooling temperature display voltage (0 to 1.5 V)
·Power supply
: +5 V, +/-15 V, +12 V, +24 V
■ Block diagram (C7181)
P+
Vp (+5V)
P. GND
VD2 (+5V)
D. GND
PLED
TH+
TH-
VF (+12V)
F. GND
Temp Monitor
Cooling Control
VD1 (+5V)
D. GND
VA1+ (+15V)
VA1- (-15V)
A. GND
TEMPERATURE CONTROLLER *
TE-COOLER
OD
TH.H
REGULATOR
RD
OG
IG1H, IG2H
IG1V, IG2V
P1V, P2V, TG
VDD
P1H, P2H
SG
RG
VA2 (+24V)
Start
CLK
VEE
TIMING
GENERATOR
DRIVER
EOS
Trigger
Mode Select
SS, ISV, ISH
BUFFER
Data Video
OS
PREAMP
INVERTER
CCD AREA IMAGE SENSOR
S7171-0909
CLAMP
LOW PASS
FILTER
* C7180 does not include the temperature controller and TE-cooler.
KACCC0158EB
■ Dimensional outlines (unit: mm)
C7180
34.0
2.7
0.5
0.3
FOCAL
PLANE
11.0
62.0
Signal I/O
FOCAL
PLANE
82.0
50.0
80.0
60.0
90.0
100.0
50.0
(4 ×) M3 DEPTH 4
KACCA0107EB
35.0
C7181
34.0
2.9
0.5
FOCAL
PLANE
77.0
11.0
Signal I/O
FOCAL
PLANE
82.0
50.0
60.0
80.0
62.0
TE Cooler I/O
90.0
100.0
50.0
(4 ×) M3 DEPTH 4
2
KACCA0108EC
C7180, C7181
CCD multichannel detector head
C7180, C7181
Multichannel detector head controller C7557
When connected to a HAMAMATSU multichannel detector head and a personal computer, C7557 allows easy control of the
detector head and data acquisition by using dedicated software that comes with the unit.
Suitable multichannel detector head
C7020/-02, C7021/-02, C7025/-02,
C7040, C7041, C7043, C7044, C7180,
C7181, C8061-01, C8062-01, C10150, C10151
■ Accessories
· SCSI terminator
· Fuse (2.5 A)
· Detector head connection cables
· AC cable
· Software (Compatible OS: Windows 98/ME *)
· Operation manual
* This software may be run on Windows 2000/NT/XP with a simple task. For information on how to do this, please consult with
our sales office.
■ Connection
SHUTTER *1
TIMING PULSE
Trig.
POWER
DEDICATED CABLE
(WITH C7557)
SIGNAL I/O
SCSI *2
CABLE
TE CONTROL I/O
IMAGE SENSOR
+
MULTICHANNEL
DETECTOR HEAD
C7557
PC (Windows98/ME)
(INTEGRATED SCSI BOARD)
*1: Shutter, etc. are not available.
*2: SCSI cable and SCSI board (card) are not supplied with C7557.
KACCC0077ED
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Cat. No. KACC1068E05
May 2007 DN
3
Similar pages