05251 EM4DLP-100L EMI FILTER/TVS ARRAY APPLICATIONS ✔ ✔ ✔ ✔ ✔ ✔ Cellular Phones Color LCD Display Panel Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards IEC COMPATIBILITY (EN61000-4) DFN-8LP ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns FEATURES ✔ ESD Protection > 25 kilovolts ✔ EMI Filtering/TVS Low Pass Filters ✔ Blocking Rectifier ✔ > 25db Attenuation from 800MHz to 3GHz ✔ Protects up to Four(4) Data Lines ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ DFN-8LP Package ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ Device Marking: Marking Code ✔ 8mm Tape and Reel Per EIA Standard 481 PIN CONFIGURATION 1 For Each Line I/On 2 3 4 100 Ohm I/On 10pF GND 10pF GND 8 Note: I/O connected from pins 1-8, 2-7, 3-6 and 4-5. 05251.R1 2/07 1 7 6 5 BOTTOM VIEW www.protekdevices.com EM4DLP-100L DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature SYMBOL VALUE UNITS TA -40 to 85 °C TSTG -55 to 150 °C DC Power Per Resistor P 400 mW Typical Resistance @ ± 20% R 100 OHMS Soldering Temperature for 10 seconds TL 265 °C Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER EM4DLP-100L DEVICE MARKING CODE 4L @ 25°C Unless Otherwise Specified CUT-OFF FREQUENCY (50 OHMS I/O) ZERO BIAS RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION TYPICAL CAPACITANCE (See Note 1) VWM VOLTS @ 1mA V(BR) VOLTS @3V ID µA @10mA VF VOLTS @ 800-3000 MHz dB fC MHz @2.5V, 1MHz C pF 5.0 6.0 0.1 0.8 25 150 20 Note 1: 30pF @ 0V, 1MHz, ± 20% tolerance. 0 FIGURE 1 TYPICAL FILTER PERFORMANCE (TA = 25C, DC BIAS = 0V, 50OHM ENVIRONMENT) Insertion Loss - dB -10 -20 -30 -40 1 05251.R1 2/07 10 100 Frequency - MHz 2 1000 10000 www.protekdevices.com EM4DLP-100L GRAPHS FIGURE 1 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25°C) Normalized Resistance 1.100 1.060 1.020 0.980 0.940 0.900 -40 -20 0 20 40 Temperature °C 60 80 100 FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25°C) 1.6 Cj - Capacitance (Normalized) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (through the filter) 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform) 05251.R1 2/07 3 www.protekdevices.com EM4DLP-100L DFN-8LP PACKAGE OUTLINE & DIMENSIONS PACKAGE DIMENSIONS PACKAGE OUTLINE MILLIMETERS P1 P2 TOP VIEW END VIEW L3 SIDE VIEW L2 DIM MIN MAX MIN P1 1.90 2.10 0.075 0.083 P2 1.50 1.70 0.059 0.067 P3 0.50 0.60 0.020 0.024 L1 0.23 0.30 0.009 0.012 L2 0.25 0.40 0.010 0.016 L3 0.13 0.18 0.005 0.007 p 0.50 0.50 0.020 0.020 G1 0.90 1.45 0.035 0.058 G2 0.30 0.42 0.012 0.016 MAX NOTES: 1. Controlling dimensions in millimeters 2. Dimension b applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals. 4. Dimension p is BSC. P3 p INCHES L1 TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T71 = 7 Inch Reel - 1,000 pieces per 8mm tape, i.e., EM4DLP-100L-T71. 3. Suffix-T73 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., EM4DLP-100L-T73. 4. Suffix - LF = Lead-Free, Pure Tin Plating, i.e., EM4DLP-100L-LF-T73. G2 G1 BOTTOM VIEW Outline & Dimensions: Rev 1 - 10/06, 06068 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”)/330mm(13”) 8mm A0 B0 K0 D E F W P0 P2 P 2.30± 0.10 2.30± 0.10 0.80 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t P2 D tmax 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Pin 1 Indicated by Dot Top cover tape A0 F W K0 B0 P User Direction of Feed COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05251.R1 2/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com