NAIS AQW214EHAZ Gu (general use)-e type 2-channel (form a) type Datasheet

AQW21❍EH
TESTING
GU (General Use)-E Type
2-Channel (Form A) Type
PhotoMOS
RELAYS
FEATURES
6.4
.252
9.86
.388
3.2
.126
6.4
.252
9.86
.388
2.9
.114
mm inch
1
8
2
7
3
6
4
5
1. Reinforced insulation 5,000 V type
More than 0.4 mm internal insulation distance between inputs and outputs. Conforms to EN41003, EN60950 (reinforced
insulation).
2. Compact 8-pin DIP size
The device comes in a compact
(W)6.4×(L)9.86×(H)3.2 mm
(W).252×(L).388×(H).126 inch, 8-pin DIP
size (through hole terminal type).
3. Applicable for 2 Form A use as well
as two independent 1 Form A use
4. Controls low-level analog signals
PhotoMOS relays feature extremely low
closed-circuit offset voltage to enable
control of low-level analog signals without
distortion.
5. High sensitivity, high speed response.
Can control a maximum 0.14 A load current with a 5 mA input current. Fast operation speed of 0.5 ms (typical).
(AQW210EH)
6. Low-level off state leakage current
TYPICAL APPLICATIONS
• Modem
• Telephone equipment
• Security equipment
• Sensors
TYPES
Part No.
Output rating*
Type
I/O isolation
voltage
AC/DC type
Reinforced
5,000 V
Load
voltage
Load
current
350 V
400 V
120 mA
100 mA
Through hole
terminal
Tube packing style
AQW210EH
AQW214EH
Packing quantity
Surface-mount terminal
AQW210EHA
AQW214EHA
Tape and reel packing style
Picked from the Picked from the
1/2/3/4-pin side 5/6/7/8-pin side
AQW210EHAX
AQW210EHAZ
AQW214EHAX
AQW214EHAZ
Tube
Tape and
reel
1 tube contains 40 pcs.
1 batch contains 400 pcs.
1,000 pcs.
*Indicate the peak AC and DC values.
Note:
For space reasons, the SMD terminal shape indicator "A" and the package type indicator "X" and "Z" are omitted from the seal.
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
LED forward current
LED reverse voltage
Input
Peak forward current
Power dissipation
Load voltage (peak AC)
Continuous load current
Output (peak AC)
Peak load current
Power dissipation
Total power dissipation
I/O isolation voltage
Temperature lim- Operating
its
Storage
Symbol
IF
VR
IFP
Pin
VL
AQW210EH (A)
AQW214EH (A)
350 V
400 V
IL
0.12 A (0.14 A)
0.1 A (0.13 A)
Ipeak
Pout
PT
Viso
Topr
Tstg
0.36 A
50mA
3V
1A
75mW
Remarks
f =100 Hz, Duty factor = 0.1%
0.3 A
800mW
850mW
5,000 V AC
–40°C to +85°C –40°F to +185°F
–40°C to +100°C –40°F to +212°F
Peak AC, DC
( ): in case of using only 1 channel
100 ms (1 shot), VL= DC
Non-condensing at low temperatures
119
AQW21❍EH
2. Electrical characteristics (Ambient temperature: 25°C 77°F)
Item
LED operate current
LED turn off
current
Input
LED dropout voltage
On resistance
Output
Transfer
characteristics
Symbol
Typical
Maximum
Minimum
Typical
Typical
Maximum
AQW214EH (A)
1.2mA
3.0mA
0.4mA
1.1mA
1.14 (1.25 V at IF=50mA)
1.5V
IFon
IFoff
VF
Typical
Ron
Maximum
Off state
leakage cur- Maximum
rent
Typical
Turn on
time*
Maximum
Typical
Turn off
time*
Maximum
Typical
I/O capacitance
Maximum
Initial I/O
isolation
resistance
AQW210EH (A)
Minimum
18Ω
26Ω
25Ω
35Ω
Toff
Ciso
Riso
IL=Max.
IL=Max.
IF=5mA
IF=5mA
IL=Max.
Within 1 s on time
1µA
IF=0mA
VL=Max.
0.5ms
2.0ms
0.08ms
1.0ms
0.8pF
IF=5mA
IL=Max.
ILeak
Ton
Condition
IF=5mA
IL=Max.
1.5pF
f =1MHz
VB =0
1,000MΩ
500V DC
Note: Recommendable LED forward current IF= 5 to 10mA.
For type of connection, see page 32.
*Turn on/Turn off time
Input
90%
Output
10%
Toff
Ton
■ For Dimensions, see Page 27.
■ For Schematic and Wiring Diagrams, see Page 32.
■ For Cautions for Use, see Page 36.
REFERENCE DATA
1. Load current vs. ambient temperature characteristics
2. On resistance vs. ambient temperature characteristics
3. Turn on time vs. ambient temperature characteristics
Allowable ambient temperature: –40°C to +85°C
–40°F to +185°F
Measured portion: between terminals 5 and 6, 7 and 8;
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
Sample: All types
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
50
100
50
AQW214EH
(using 2 channels) AQW210EH
(using 2 channels)
3
2.5
40
AQW214EH
30
AQW210EH
20
120
0
20
40
60
8085 100
Ambient temperature, °C
2
1.5
1
10
0
–40 –20
Turn on time, ms
AQW210EH
AQW214EH
(using only 1 channel) (using only 1 channel)
150
On resistamce, Ω
Load current, mA
200
0
0.5
–40
–20
0
20
40
60
8085
Ambient temperature, °C
0
–40
–20
0
20
40
60 8085
Ambient temperature, °C
AQW21❍EH
4. Turn off time vs. ambient temperature characteristics
5. LED operate current vs. ambient temperature characteristics
6. LED turn off current vs. ambient temperature
characteristics
Sample: All types
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
0.3
0.2
0.15
0.1
LED turn off current, mA
LED operate ourrent, mA
Turn off time, ms
0.25
4
3
2
–40
–20
0
0
20
40
60 8085
Ambient temperature, °C
–40
–20
Sample: All types; LED current: 5 to 50 mA
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
Current, mA
LED dropout voltage, V
140
120
100
80
60
40
20
–5 –4 –3 –2 –1
1.3
1.2
1.0
0
–40
–20
AQW214EH
1 2 3 4
–20
Voltage, V
–40
–60
–80
–100
–120
AQW210EH –140
50mA
30mA
20mA
10mA
5mA
1.1
2
0
20
40
60
8085
Ambient temperature, °C
5
–40
–20
0
20
40
60 8085
Ambient temperature, °C
9. Off state leakage current
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
Off state leakage current, A
8. Voltage vs. current characteristics of output
at MOS portion
1.4
3
0
0
20
40
60 8085
Ambient temperature, °C
7. LED dropout voltage vs. ambient temperature characteristics
1.5
4
1
1
0.05
0
5
5
10–3
10–6
10–9
AQW214EH
AQW210EH
10–12
0
20
40
60
80
100
Load voltage, V
10. LED forward current vs. turn on time characteristics
11. LED forward current vs. turn off time characteristics
12. Applied voltage vs. output capacitance
characteristics
Sample: All types
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
Sample: All types
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
Sample: All types
Measured portion: between terminals 5 and 6, 7 and 8;
Frequency: 1 MHz; Ambient temperature: 25°C 77°F
3
50
Output capacitamce, pF
0.2
Turn off time, ms
Turn on time, ms
2.5
2
1.5
0.15
0.1
1
0.05
5/7/2001
10
20
30
40
50
LED forward current, mA
60
0
0
30
20
10
0.5
0
40
10
20
30
40
50
LED forward current, mA
60
0
0
10
20
30
40
Applied voltage, V
50
All Rights Reserved, © Copyright Matsushita Electric Works, 121
Ltd.
Go To Online Catalog
Similar pages