UNISONIC TECHNOLOGIES CO., LTD DTD113Z NPN SILICON TRANSISTOR NPN DIGITAL TRANSISTOR (BUILT- IN BIAS RESISTORS) FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow negative input. EQUIVALENT CIRCUIT *Pb-free plating product number:DTD113ZL ORDERING INFORMATION Order Number Normal Lead Free Plating DTD113Z-AE3-6-R DTD113ZL-AE3-6-R DTD113Z-AL3-6-R DTD113ZL-AL3-6-R Package SOT-23 SOT-323 Pin Assignment 1 2 3 G I O G I O Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 3 QW-R206-082,C DTD113Z NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC 50 V Input Voltage VIN -5 ~ +10 V Output Current IOUT 500 mA Power Dissipation PC 200 mW Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL SPECIFICATIONS (Ta=25°C, unless others specified) PARAMETER SYMBOL TEST CONDITIONS VIN(OFF) VCC =5V, IOUT =100μA Input Voltage VIN(ON) VOUT =0.3V, IOUT =20mA Output Voltage VOUT(ON) IOUT/IIN =50mA/2.5mA Input Current IIN VIN=5V Output Current IOUT(OFF) VCC =50V, VIN =0V DC Current Gain hFE VOUT =5V, IOUT =50mA Input Resistance R1 Resistor Ratio R2/R1 Transition Frequency fT VCE =10V, IE =−50mA, f=100MHz Note: Transition frequency of the device UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX 0.3 UNIT 0.1 0.3 7.2 0.5 V mA μA 1 10 200 1.3 12 KΩ 1.5 82 0.7 8 V MHz 2 of 3 QW-R206-082,C DTD113Z NPN SILICON TRANSISTOR TYPICAL CHARACTERISTICS Output Voltage vs. Output Current DC Current Gain vs. Output Current 1K 500 1000 VOUT=5V 200 Ta=100℃ 25℃ -20℃ 200 100 100 50 100 20 20 10 10 5 5 2 2 1 0.5 1 lOUT/lIN=20 500 Ta=100℃ 25℃ -20℃ 1 2 5 10 20 50 100 200 500 Output Current, IOUT (mA) 0.5 1 2 5 10 20 50 100 200 500 Output Current, IOUT (mA) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R206-082,C