TA8428K(S)/F TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC TA8428K(S),TA8428F FULL BRIDGE DRIVER The TA8428K (S), TA8428F is Full Bridge Driver IC for Brush Motor Rotation Control. Forward Rotation, Reverse Rotation, Stop and Braking operations are available. Thermal Shutdown and Short Current Protector are provided. FEATURES l Output Current : TA8428K (S) TA8428F 1.5 A (AVE.), 3.0 A (PEAK) 0.8 A (AVE.), 2.4 A (PEAK) l 4 modes (forward / reverse / short brake and stop) are available with 2 TTL compatible inputs control. l Free wheeling diodes are equipped. l Multi protection system driver (Thermal shutdown and short current protector) Weight HSIP7−P−2.54 : 1.88 g (Typ.) HSOP20−P−450−1.00 : 0.79 g (Typ.) 1 2001-06-13 TA8428K(S)/F BLOCK DIAGRAM TA8428K(S) TA8428F PIN FUNCTION PIN No. SYMBOL FUNCTIONAL DESCRIPTION K(S) F 1 8 IN 1 TTL compatible control inputs. 2 9 IN 2 (PNP type low active comparator inputs) 3 15 OUTA Output terminals and free wheeling diodes are connected between each output to GND and VCC. 4 Fin GND GND terminal 5 16 OUT A 6 Other pin N.C Non connection 7 1, 3 VCC Supply voltage terminal for control and motor drive. Output terminals and free wheeling diodes are connected between each output to GND and VCC. TA8428K (S), TA8428F has 2 build−in protective functions which work independently. These circuit operations are as follows. l Thermal shutdown (TSD) If junction temperature of TA8428K (S), TA8428F is over the specified temperature (150°C Typ.) by excess power dissipation or abnormal ambient temperature change, thermal Shutdown circuit turn “ON” and output 4 transistors become High impedance. (All transistors turn “OFF”) 2 2001-06-13 TA8428K(S)/F l Short current protector (ISD) Short current protector circuit senses all output transistor current. If output transistor current is over the specified limiting current value (2.0~3.0 A Typ.), short current protector operates and all output transistors periodically turn “OFF” (High Impedance Mode) in a period of approximately 80 µs. This state is continued until the release of over current mode. 3 2001-06-13 TA8428K(S)/F INTERNAL CIRCUIT TA8428K(S) TA8428F 4 2001-06-13 TA8428K(S)/F MAXIMUM RATINGS (Ta = 25°C) CHARACTERISTIC SYMBOL RATING UNIT Supply Voltage VCC 30 V Input Voltage VIN −0.3~VCC V IO (PEAK) 3.0 (Note 1) K (S) type Output Current F type PEAK AVE. IO (AVE.) 1.5 PEAK IO (PEAK) 2.4 (Note 1) AVE. IO (AVE.) 0.8 K (S) type 1.25 (Note 2) PD 10.0 (Note 3) Power Dissipation F type A W 1.9 (Note 4) PD 2.5 (Note 5) Operating Temperature Topr −30~85 °C Storage Temperature Tstg −55~150 °C Note 1: Note 2: Note 3: Note 4: Note 5: t = 100 ms No heat sink Tc = 85°C This value is obtained by 30 × 30 × 1.6 mm PCB mounting occupied copper area in excess of 60% This value is obtained by 50 × 50 × 1.6 mm PCB mounting occupied copper area in excess of 60% ELECTRICAL CHARACTERISTICS (VCC = 24 V, Ta = 25°C) CHARACTERISTIC SYMBOL TEST CIR− CUIT ICC1 Quiescent Current ICC2 1 ICC3 VIL Input Voltage VIH IIL Input Current Output Saturation Voltage IIH K (S) type F type ILU Output Leakage Current ILL K (S) type Diode Forward Voltage F type Thermal Shutdown Circuit Operating Temperature Propagation Delay Time Vsat (total) ILU MIN TYP. MAX Stop mode ― 8 15 Forward / reverse mode ― 35 85 Brake mode ― 16 30 ― ― ― 0.8 ― 2.0 ― ― VIN = GND ― ― 50 VIN = VCC ― ― 10 IO = 1.5 A, Tc = 25°C ― 2.2 2.9 IO = 0.8 A, Tc = 25°C ― 1.8 2.5 ― ― 50 ― ― 50 ― 2.6 ― ― 1.5 ― ― 2.2 ― ― 1.2 ― 2 2 3 4 ILU ILL Test Condition VL = 25 V IF = 1.5 A 4 IF = 0.8 A ILL TSD ― ― ― 150 ― tpLH 2 ― ― 1 ― tpHL 2 ― ― 1 ― 5 UNIT mA V µA V µA V °C µs 2001-06-13 TA8428K(S)/F FUNCTION INPUT OUTPUT OUT A RATING IN1 IN2 OUTA H H L L Brake L H L H CW / CCW H L H L CCW / CW L L OFF (high impedance) Note: Note: PIN (6) is non connection. Heat fin is connected with GND with low impedance. Stop TEST CIRCUIT 1 ICC1, ICC2, ICC3 TEST CIRCUIT 2 VIL, VIH, IIL, IIH, tpLH, tpHL TEST CIRCUIT 3 Vsat TA8428K(S) TA8428F 6 2001-06-13 TA8428K(S)/F TEST CIRCUIT 4 ILH, ILL TEST CIRCUIT 5 VFU, VFL TA8428K(S) TA8428F 7 2001-06-13 TA8428K(S)/F 8 2001-06-13 TA8428K(S)/F APPLICATION CIRCUIT TA8428K(S) TA8428F Note: Note: Note: Note: Recommend to take approximately 100 ms of input dead time for reliable operations. Utmost care is necessary in the design of the output line, VCC and GND line since IC may be destroyed due to short−circuit between outputs, air contamination fault, or fault by improper grounding. In case of mounted on radiators, do not use silicon rubber. (TA8428K (S)) Connect and use 1 pin and 3 pin surely. (TA8428F) 9 2001-06-13 TA8428K(S)/F PACKAGE DIMENSIONS HSIP7−P−2.54 Unit : mm Weight : 1.88 g (Typ.) 10 2001-06-13 TA8428K(S)/F PACKAGE DIMENSIONS HSOP20−P−450−1.00 Unit : mm Weight : 0.79 g (Typ.) 11 2001-06-13 TA8428K(S)/F RESTRICTIONS ON PRODUCT USE 000707EBA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 12 2001-06-13