ZETTLER AZ881P2-2A-12D 8 a spst / 5 a dpst polarized subminiature power relay monostable or latching Datasheet

AZ881
8 A SPST / 5 A DPST POLARIZED
SUBMINIATURE POWER RELAY
MONOSTABLE OR LATCHING
FEATURES
•
•
•
•
•
•
Dielectric strength 4000 Vrms
Single and dual coil latching versions available
Epoxy sealed version available
8 Amp switching
Class F (155°C) insulation available
UL, CUR file E44211
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A), DPST (2 Form A)
DPST (1 Form A and 1 Form B)
Ratings
Resistive load:
Max. switched power: 150 W or 2000 VA (SPST)
150 W or 1250 VA (DPST)
Max. switched current:
8 A (SPST)
5 A (DPST)
Max. switched voltage: 150 VDC or 380 VAC*
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 8 A 250 VAC resistive (SPST)
Operate Time (typical)
5 ms at nominal coil voltage
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
Set Time (typical)
5 ms at nominal coil voltage
Recommended coil pulse: 20 ms
Reset Time (typical)
4 ms at nominal coil voltage
Recommended coil pulse: 20 ms
Dielectric Strength
(at sea level)
4000 Vrms contact to coil
1000 Vrms between open contacts
2000 Vrms between contact sets
Insulation Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
Vibration
0.078” (2.0 mm) DA at 10 to 55 Hz
Shock
20 g functional
100 g destructive
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
SPST
8 A at 250 VAC resistive, 100k cycles
5 A at 30 VDC resistive, 100k cycles
1/6 HP at 250 VAC
DPST
5 A at 250 VAC resistive, 100k cycles
5 A at 30 VDC resistive, 100k cycles
1/6 HP at 250 VAC
Material
Silver nickel, gold plating optional
Resistance
< 50 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
192 mW (monostable, 2 coil latching)
96 mW (1 coil latching)
Max. Continuous
Dissipation
0.75 W at 20°C (68°F) ambient
Max. Solder Temp.
270°C (518°F)
Temperature Rise
30°C (54°F) at nominal coil voltage
Max. Solder Time
5 seconds
130°C (266°F) Class B
155°C (311°F) Class F
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
5 grams
Packing unit in pcs
50 per plastic tube / 2000 per carton box
Max. Temperature
NOTES
1.
2.
3.
4.
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
7. DPST (1Form A and 1Form B): Both contacts may be closed
simultaneously during transfer at set / reset process.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-17
AZ881
RELAY ORDERING DATA
AZ881
COIL SPECIFICATIONS - MONOSTABLE
Nominal
Coil
VDC
3
Must
Operate
VDC
2.4
ORDER NUMBER*
Max. Continuous
VDC
Ohm ± 10%
4.7
Coil
Resistance
1 Form A
2 Form A
1 Form A
1 Form B
30
AZ881-1A-3D
AZ881-2A-3D
5
4.0
7.9
83
AZ881-1A-5D
AZ881-2A-5D
AZ881-1AB-3D
AZ881-1AB-5D
6
4.8
9.6
120
AZ881-1A-6D
AZ881-2A-6D
AZ881-1AB-6D
9
7.2
14.4
270
AZ881-1A-9D
AZ881-2A-9D
AZ881-1AB-9D
12
9.6
19.2
480
AZ881-1A-12D
AZ881-2A-12D
AZ881-1AB-12D
24
19.2
37.9
1920
AZ881-1A-24D
AZ881-2A-24D
AZ881-1AB-24D
*Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “F” for class F insulation.
AZ881P1
COIL SPECIFICATIONS - SINGLE COIL LATCHING
Nominal
Coil
VDC
3
Must
Operate
VDC
2.4
ORDER NUMBER*
Max. Continuous
VDC
Ohm ± 10%
6.7
Coil
Resistance
1 Form A
2 Form A
1 Form A
1 Form B
60
AZ881P1-1A-3D
AZ881P1-2A-3D
AZ881P1-1AB-3D
5
4.0
11.2
167
AZ881P1-1A-5D
AZ881P1-2A-5D
AZ881P1-1AB-5D
6
4.8
13.4
240
AZ881P1-1A-6D
AZ881P1-2A-6D
AZ881P1-1AB-6D
9
7.2
20.1
540
AZ881P1-1A-9D
AZ881P1-2A-9D
AZ881P1-1AB-9D
12
9.6
26.8
960
AZ881P1-1A-12D
AZ881P1-2A-12D
AZ881P1-1AB-12D
*Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “F” for class F insulation.
AZ881P2
COIL SPECIFICATIONS - DUAL COIL LATCHING
Nominal
Coil
VDC
3
Must
Operate
VDC
2.4
ORDER NUMBER*
Max. Continuous
VDC
Ohm ± 10%
4.7
Coil
Resistance
1 Form A
2 Form A
1 Form A
1 Form B
30
AZ881P2-1A-3D
AZ881P2-2A-3D
5
4.0
7.9
83
AZ881P2-1A-5D
AZ881P2-2A-5D
AZ881P2-1AB-3D
AZ881P2-1AB-5D
6
4.8
9.6
120
AZ881P2-1A-6D
AZ881P2-2A-6D
AZ881P2-1AB-6D
9
7.2
14.4
270
AZ881P2-1A-9D
AZ881P2-2A-9D
AZ881P2-1AB-9D
12
9.6
19.2
480
AZ881P2-1A-12D
AZ881P2-2A-12D
AZ881P2-1AB-12D
24
19.2
37.9
1920
AZ881P2-1A-24D
AZ881P2-2A-24D
AZ881P2-1AB-24D
*Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “F” for class F insulation.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-17
AZ881
MECHANICAL DATA
Outline Dimensions
-1A
Monostable and 1 coil latching
-2A, -1AB
.433MAX
[11.0]
0.795MAX
[20.2]
.433MAX
[11.0]
.795MAX
[20.2]
.409MAX
[10.40]
.134
[3.40]
.048
[1.22]
.409MAX
[10.40]
.134
[3.40]
.300
[7.62]
.400
[10.16]
.048
[1.22]
.300
[7.62]
4 x .016 x .031
4 x [.40 x .80]
.400
[10.16]
.300
[7.62]
.300
[7.62]
6 x .016 x .031
6 x [.40 x .80]
-1A
2 coil latching
-2A, -1AB
.433MAX
[11.0]
.795MAX
[20.2]
.433MAX
[11.0]
.795MAX
[20.2]
.409MAX
[10.40]
.134
[3.40]
.134
[3.40]
.100
[2.54]
.400
[10.16]
.300
[7.62]
.300
[7.62]
6 x .016 x .031
6 x [.40 x .80]
Wiring Diagrams
Monostable and 1 coil latching
.300
[7.62]
.400
[10.16]
-
+
+
+
-2A, -1AB
1 coil latching (Reset condition)
6-Ø.047
[Ø1.20]
-1A
.300
[7.62]
.100
[2.54]
.300
[7.62]
+
-
set
2 coil latching
.300
[7.62]
-1AB
-2A
+
-
set
-
.100
[2.54]
-1AB
-
reset
4-Ø.047
[Ø1.20]
-2A
-1A
-
set
.300
[7.62]
-1A
Monostable (Denergized condition)
.300
[7.62]
reset
.300
[7.62]
.300
[7.62]
.300
[7.62]
8 x .016 x .031
8 x [.40 x .80]
PC Board Layout
.400
[10.16]
.100
[2.54]
.400
[10.16]
.048
[1.22]
reset
.048
[1.22]
.409MAX
[10.40]
+
-
+
-
+
-
+
.300
[7.62]
2 coil latching (Reset condition)
-2A
-
+
+
Viewed toward terminals
-
reset
8-[Ø.047]
[Ø1.20]
-
-1AB
-
set
-
reset
-1A
-2A, -1AB
set
.300
[7.62]
reset
6-[Ø.047]
[Ø1.20]
-1A
set
.300
[7.62]
-
+
+
+
+
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-17
Similar pages