API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:14 PM Page 97 Physical Parameters Inches Millimeters A 0.630 ± 0.030 16.0 ± 0.762 B (C/L to C/L) See Characteristics table C 0.750 Min. 19.05 Min. D 0.810 ± 0.020 20.57 ±0.508 E (Ref. only) 0.195 Max. 4.95 Max. F Clearance Hole for 4/40 Screw Leads Tinned to within 1/16" of Body Inductance Measured @ 10 KHz, 25mAdc and 0 Adc @ 25°C Mechanical Configuration Center hole allows for mechanical mounting s or ct du In er ow Actual Size P ER ET e) AM nc DI ere f AD Re B LE es, N ch IO e) (In NS enc ME er DI Ref , L es TA ch EN C) (In EM A D CR T ( IN EN NG RR TI ) CU RA C T AD EN M ( RR U E CU XIM ANC MA IST 25°C S RE ) @ S DC M H CE (O AN M R MU LE XI TO L MA NA MI H) NO (µ CE AN * CT ER DU IN MB NU High Current Power Line Chokes SH DC630R DC630 DA SERIES -102M -152M -222M -272M -332M -392M -472M -562M -682M -822M -103K -123K -153K -183K -223K -273K -333K -393K -473K -563K -683K -823K -104K -124K -154K -184K -224K -274K -334K -394K -474K -564K -684K 1.0 1.5 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100 120 150 180 220 270 330 390 470 560 680 ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% SERIES 0.003 0.004 0.005 0.005 0.005 0.006 0.007 0.007 0.008 0.009 0.010 0.011 0.015 0.020 0.025 0.030 0.040 0.050 0.062 0.069 0.077 0.083 0.095 0.100 0.111 0.125 0.168 0.225 0.315 0.342 0.377 0.408 0.468 DC630 14.00 13.50 12.80 12.80 12.80 12.30 11.70 11.70 10.50 10.00 9.50 9.10 8.09 7.00 6.26 5.72 4.95 4.43 3.98 3.77 3.57 3.44 3.21 3.12 2.97 2.80 2.42 2.09 1.72 1.66 1.58 1.52 1.42 68.0 55.5 46.0 42.0 38.0 34.5 31.5 29.0 26.0 24.0 21.5 19.5 17.5 16.0 14.5 13.2 11.9 10.9 10.0 9.20 8.30 7.60 6.80 6.20 5.60 5.10 4.60 4.20 3.80 3.40 3.10 2.90 2.60 0.490 0.490 0.490 0.490 0.490 0.490 0.490 0.490 0.490 0.490 0.490 0.490 0.470 0.460 0.460 0.440 0.430 0.420 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.470 0.450 0.450 0.480 0.480 0.480 0.480 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.045 0.040 0.040 0.036 0.032 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.025 0.023 0.020 0.020 0.020 0.020 0.020 *Complete part # must include series # PLUS the dash # For surface finish information, refer to www.delevanfinishes.com Operating Temperature –55°C to +125°C; –55°C to +80°C @ full rated current Current Rating at 80°C Ambient 45°C Rise Incremental Current Minimum current which causes a 5% max. change in Inductance Power Dissipation at 80°C 1.00 Watts Max. Dielectric Withstanding Voltage 1000 V RMS Min. Marking DELEVAN; DC630; dash number with tolerance letter. Note: An R after DC630 indicates a RoHS component. Example: DC630-102M DELEVAN DC630 102M Packaging Bulk only 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 1/2009