P-DUKE FEC30-24S12W 30 watts dc-dc converter Datasheet

FEC30W SERIES
30 WATTS
DC-DC CONVERTER
FEATURES
• 30 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 8A
• STANDARD 2.00 X 1.60 X 0.40 INCH PACKAGE
• HIGH EFFICIENCY UP TO 88%
• 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• OFFER SINGLE AND DUAL OUTPUT
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
Negative logic Remote On/Off
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FEC30W series offer 30 watts of output power from a 2.00 x 1.60 x
0.40 inch package .The FEC30W series with 4:1 wide input voltage of
10~40VDC and 18~75VDC and features 1600VDC of isolation,
short-circuit and over-voltage protection.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
INPUT SPECIFICATIONS
OUTPUT SPECIFICATIONS
Output power
30 Watts, max.
Voltage accuracy
± 1%
Minimum load
See Table
Voltage adjustability
Line regulation
± 10%
LL to HL at Full Load
± 0.5%
± 0.5%
± 1%
± 5%
Single
Dual
Cross regulation (Dual)
Asymmetrical load 25% / 100% FL
20MHz bandwidth
Ripple and noise
See table
(Measured with a 0.1µF/50V MLCC)
Temperature coefficient
± 0.02% / ºC, max.
Load regulation
No Load to Full Load
Transient response recovery time
25% load step change
1.5VDC output
1.8VDC output
2.5VDC output
Over voltage protection
3.3VDC output
Zener diode clamp
5VDC output
12VDC output
15VDC output
Over load protection
% of FL at nominal input
Short circuit protection
250µs
3.9VDC
3.9VDC
3.9VDC
3.9VDC
6.2VDC
15VDC
18VDC
150%, max.
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
See table
Input to Output
1600VDC, min. 1minute
Input (Output) to Case 1600VDC, min. 1minute
9
500VDC
10 ohms, min.
Isolation capacitance
1000pF, max.
Switching frequency
Safety approvals
300kHz±10%.
IEC60950-1, UL60950-1, & EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
Potting material
Epoxy (UL94 V-0)
2.00 X 1.60 X 0.40 Inch
(50.8 X 40.6 X 10.2 mm)
48g (1.69oz)
Dimensions
Weight
MTBF (Note 1)
Page 1 of 3
MIL-HDBK-217F
7.598 x 105 hrs
10 – 40VDC
18 – 75VDC
Input filter
L-C type
24VDC input
50VDC 100ms,max
Input surge voltage
48VDC input
100VDC 100ms,max
Input reflected ripple current
20mAp-p
Nominal input and
Power up
10ms
Start up time
10ms
constant resistive load Remote ON/OFF
24VDC input
10VDC
Start-up voltage
48VDC input
18VDC
24VDC input
8VDC
Shutdown voltage
16VDC
48VDC input
Remote ON/OFF (Note 6)
(Positive logic)(Standard)
DC-DC ON
Open or 3V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)(Option)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3V < Vr < 12V
Input current of remote control pin Nominal input
-0.5mA ~ +0.5mA
Remote off state input current
Nominal input
3mA
Input voltage range
24VDC nominal input
48VDC nominal input
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
Maximum case temperature
100ºC
Over temperature protection
115ºC.
Storage temperature range
-55ºC ~ +125ºC
Thermal impedance
Natural convection
10ºC/Watt
(Note 7)
Natural convection with heat-sink
8.24ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 8)
EN55022
ESD
EN61000-4-2
Radiated immunity
EN61000-4-3
Fast transient (Note 9) EN61000-4-4
Surge (Note 9)
EN61000-4-5
Conducted immunity
EN61000-4-6
www.pduke.com
Class A, Class B
Air
Contact
± 8kV
Perf. Criteria B
± 6kV
10 V/m
Perf. Criteria A
± 2kV Perf. Criteria A
± 1kV Perf. Criteria B
10 Vr.m.s
Perf. Criteria A
2014/4/30
FEC30W SERIES
30 WATTS
Model
Number
Input
Range
Output
Output Current
Voltage Min. load Full load
FEC30-24S1P5W
FEC30-24S1P8W
FEC30-24S2P5W
FEC30-24S3P3W
FEC30-24S05W
FEC30-24S12W
FEC30-24S15W
FEC30-24D12W
FEC30-24D15W
FEC30-48S1P5W
FEC30-48S1P8W
FEC30-48S2P5W
FEC30-48S3P3W
FEC30-48S05W
FEC30-48S12W
FEC30-48S15W
FEC30-48D12W
FEC30-48D15W
10 ~ 40 VDC
10 ~ 40 VDC
10 ~ 40 VDC
10 ~ 40 VDC
10 ~ 40 VDC
10 ~ 40 VDC
10 ~ 40 VDC
10 ~ 40 VDC
10 ~ 40 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
1.5 VDC
1.8 VDC
2.5 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
±12VDC
±15VDC
1.5 VDC
1.8 VDC
2.5 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
±12VDC
±15VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
DC-DC CONVERTER
(2)
(3)
(4)
Output
Ripple & Noise
No load
Input Current
Eff
(%)
60mVp-p
60mVp-p
60mVp-p
60mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
60mVp-p
60mVp-p
60mVp-p
60mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
35mA
35mA
40mA
50mA
65mA
65mA
70mA
30mA
35mA
20mA
20mA
25mA
30mA
30mA
35mA
45mA
25mA
25mA
80
83
85
87
87
87
88
84
85
80
83
86
87
88
87
88
85
86
8000mA
8000mA
8000mA
6000mA
6000mA
2500mA
2000mA
±1250mA
±1000mA
8000mA
8000mA
8000mA
6000mA
6000mA
2500mA
2000mA
±1250mA
±1000mA
(5)
Capacitor
Load max
65000µF
65000µF
33000µF
19500µF
10200µF
3300µF
1100µF
±1000µF
±680µF
65000µF
65000µF
33000µF
19500µF
10200µF
3300µF
1100µF
±1000µF
±680µF
Note
MIL-HDBK-217F @Ta=25 ºC, Full load.
Typical value at nominal input and full load. (20MHZ BW.)
Typical value at nominal input and no load.
Typical value at nominal input and full load.
Test by minimum input and constant resistive load.
The CTRL pin voltage is referenced to -INPUT.
To order negative logic ON-OFF control add the suffix-N (Ex: FEC30-24S05W-N).
7. Heat-sink is optional and P/N: 7G-0011C-F.
8. The FEC30W series standard module meets EN55022 Class A and Class B with external components.
For more detail information, please contact with P-DUKE.
9. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
FEC30-48S05W Derating Curve
With Heatsink (Note 7 )
FEC30-48S05W Derating Curve
120
O U T P U T P O W E R (% )
O U T P U T P O W E R (% )
1.
2.
3.
4.
5.
6.
100
80
60
40
20
0
-40
-20
0
20
40
60
59
80
100
120
100
80
60
40
20
0
120
-40
-20
0
AMBIENT TEMPERATURE(℃)
FEC30-48S05W
Efficiency VS Input Voltage
E F F IC IE N C Y (% )
E F F IC IE N C Y (% )
90
88
86
84
82
80
78
76
18
24
30
36
42
48
54
60
20
40
60
66
80
100
℃
120
AMBIENT TEMPERATURE( )
66
72
95
90
85
80
75
70
65
60
55
50
45
FEC30-48S05W
Efficiency VS Output Load
10
INPUT VOLTAGE (V)
20
30
40
50
60
70
80
90
100
OUTPUT LOAD (% of Full Load)
Page 2 of 3
www.pduke.com
2014/4/30
FEC30W SERIES
30 WATTS
DC-DC CONVERTER
MECHANICAL DRAWING
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01(0.25)
3. Pin dimension tolerance ±0.004 (0.1)
PIN CONNECTION
PIN
1
2
4
5
6
7
8
Page 3 of 3
SINGLE
+ INPUT
- INPUT
CTRL
NO PIN
+ OUTPUT
- OUTPUT
TRIM
DUAL
+ INPUT
- INPUT
CTRL
+ OUTPUT
COMMON
- OUTPUT
TRIM
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by
using the method shown below.
( ) FOR DUAL OUTPUT TRIM
TRIM UP
TRIM DOWN
8(8)
7(7)
RU
8(8)
www.pduke.com
RD
6(5)
2014/4/30
Similar pages