YAGEO CC0201MFYSV6BN150 Surface-mount ceramic multilayer capacitor Datasheet

DATA SHEET
SURFACE-MOUNT CERAMIC
MULTILAYER CAPACITORS
General purpose & High capacitance
Class 2, Y5V
6.3 V TO 50 V
10 nF to 47 µF
Product Specification – Jul 29, 2010 V.5
RoHS compliant & Halogen Free
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
6.3 V to 50 V
2
14
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP
This specification describes Y5V
series chip capacitors with leadfree terminations.
All part numbers are identified by the series, size, tolerance, TC material,
packing style, voltage, process code, termination and capacitance value.
APPLICATIONS
Consumer electronics, for
example:
- Tuners
- Television receivers
- Video recorders
- All types of cameras
- Mobile telephones
FEATURES
Supplied in tape on reel
Nickel-barrier end termination
RoHS compliant
Halogen Free compliant
CTC & 12NC
YAGEO BRAND ordering code
GLOBAL PART NUMBER
( PREFERRED )
CC
XXX
XXXX X X
(1)
Y5V
(2) (3)
X
BB
(4)
(5)
(1) SIZE – INCH BASED (METRIC)
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
1210 (3225)
(2) TOLERANCE
M = ±20%
Z = –20% to +80%
(3) PACKING STYLE
R = Paper/PE taping reel; Reel 7 inch
K = Blister taping reel; Reel 7 inch
P = Paper/PE taping reel; Reel 13 inch
F = Blister taping reel; Reel 13 inch
C = Bulk case
(4) RATED VOLTAGE
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
(5) CAPACITANCE VALUE
2 significant digits+number of zeros
The 3rd digit signifies the multiplying factor, and letter R is decimal point
Example: 103 = 10 x 103 = 10,000 pF = 10 nF
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
6.3 V to 50 V
3
14
PHYCOMP BRAND ordering codes
GLOBAL PART NUMBER (preferred), PHYCOMP CTC (for North America) and 12NC (traditional) codes are
acceptable to order Phycomp brand products.
GLOBAL PART NUMBER
( PREFERRED )
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC
CODE
handbook, full pagewidth
2 2 XX
XX
X
X
9
X
XX
Capacitance value(1)
Carrier type
50 = Blister (6.3 V)
55 = Paper/PE (6.3 V)
22 = Blister
38 = Paper/PE
54 = Bulk
Tolerance
7 = ±20%
8 = −20 to +80%
Voltage
20 = 6.3 V
24 = 10 V
78 = 16 V
91 = 25 V
58 = 50 V
Packaging(2)
1 = reel: ∅180 mm; 7"
5 = reel: ∅330 mm; 13"
4 = bulk case
YNM0009
Size
8 = 0201
7 = 0402
6 = 0603
0 = 0805
1 = 1206
2 = 1210
(1) Please refer to "Last 2-digit of 12NC" in "CAPACITANCE RANGE & THICKNESS FOR Y5V"
(2) Quantity on reel depends on thickness classification; see table 5
PHYCOMP CTC
CODE ( FOR NORTH AMERICA )
Example: 12062F105M8BB0D
1206
2F
105
M
Size
code
Temp.
Char.
Capacitance
in pF
Tolerance
0201
2F = Y5V
0402
0603
0805
1206
1210
8
Voltage Termination
101 = 100 pF;
M = ±20%
5 = 6.3 V
the third digit
Z = –20% to +80% 6 = 10 V
signifies the
7 = 16 V
multiplying factor:
8 = 25 V
0=×1
9 = 50 V
1 = × 10
2 = × 100
B
B = NiSn
B
0
D
Packing
Marking
Range identifier
2 = 180 mm
0 = no marking D = Class 2 MLCC
7” Paper/PE
3 = 330 mm
13” Paper/PE
B = 180 mm
7” Blister
3 = × 1,000
F = 330 mm
13” Blister
4 = x 10,000
P = Bulk case
5 = x 100,000
6 = x 1,000,000
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
6.3 V to 50 V
4
14
CONSTRUCTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes are
contained. This structure gives
rise to a high capacitance per
unit volume.
The inner electrodes are
connected to the two end
terminations and finally covered
with a layer of plated tin (NiSn).
The terminations are lead-free. A
cross section of the structure is
shown in Fig.1.
terminations
electrodes
MLB457
ceramic material
Fig. 1 Surface mounted multilayer ceramic capacitor construction
DIMENSION
Table 1 For outlines see fig. 2
TYPE
L1 (mm)
W (mm)
0201
0402
0603
0.6 ±0.03
1.0 ±0.05
0805
1206
1210
1812
OUTLINES
T (MM)
L2 / L3 (mm)
L4 (mm)
min.
max.
0.3 ±0.03
0.10
0.20
0.20
0.5 ±0.05
0.20
0.30
0.40
1.6 ±0.10
0.8 ±0.10
0.20
0.60
0.40
2.0 ±0.10 (1)
1.25 ±0.10 (1)
2.0 ±0.20 (2)
1.25 ±0.20 (2)
0.25
0.75
0.55
3.2 ±0.15
(1)
1.6 ±0.15
3.2 ±0.30
(2)
1.6 ±0.20 (2)
3.2 ±0.20
(1)
±0.20 (1)
2.5
(1)
3.2 ±0.40 (2)
2.5 ±0.30 (2)
4.5 ±0.20 (1)
3.2 ±0.20 (1)
4.5 ±0.40 (2)
3.2 ±0.40 (2)
Refer to
table 2 to 4
For dimension see Table 1
min.
W
T
L2
L4
L3
MBB211
L1
0.25
0.75
1.40
Fig. 2 Surface mounted multilayer ceramic
capacitor dimension
0.25
0.75
1.40
0.25
0.75
2.20
NOTE
1. Dimension for size 0805 to 1812, C ≤ 100 nF
2. Dimension for size 0805 to 1812, C > 100 nF
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
6.3 V to 50 V
5
14
CAPACITANCE RANGE & THICKNESS FOR Y5V
Table 2 Sizes from 0201 to 0402
CAP.
Last 2-digit of 12NC
≤ 25 V
50 V
10 nF
36
05
22 nF
41
07
47 nF
45
09
100 nF
49
12
220 nF
52
14
470 nF
58
16
1.0 µF
63
18
2.2 µF
67
4.7 µF
72
10 µF
76
22 µF
81
47 µF
85
0201
0402
6.3 V
25 V
6.3 V
10 V
16 V
25 V
50 V
0.3±0.03
0.5±0.05
0.5±0.05
0.5±0.05
0.3±0.03
0.5±0.05
0.5±0.05
Table 3 Sizes from 0603 to 0805
CAP.
Last 2-digit of 12NC
≤ 25 V
50 V
10 nF
36
05
22 nF
41
07
47 nF
45
09
100 nF
49
12
220 nF
52
14
470 nF
58
16
1.0 µF
63
18
2.2 µF
67
4.7 µF
72
10 µF
76
22 µF
81
47 µF
85
0603
6.3 V
0805
10 V
16 V
25 V
50 V
6.3 V
10 V
16 V
0.8±0.1
25 V
50 V
0.6±0.1
0.6±0.1
0.8±0.1
0.6±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.25±0.2
0.85±0.1
1.25±0.2
0.85±0.1 0.85±0.1
1.25±0.2 1.25±0.2
1.25±0.2 1.25±0.2
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-3 series is on request
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
6.3 V to 50 V
6
14
CAPACITANCE RANGE & THICKNESS FOR Y5V
Table 4 Sizes from 1206 to 1210
CAP.
Last 2-digit of 12NC
≤ 25 V
50 V
10 nF
36
05
22 nF
41
07
47 nF
45
09
100 nF
49
12
220 nF
52
14
470 nF
58
16
1.0 µF
63
18
1206
1210
6.3 V
10 V
16 V
25 V
50 V
0.6±0.1
0.6±0.1
0.85±0.1
2.2 µF
67
4.7 µF
72
10 µF
76
0.85±0.1
22 µF
81
1.6±0.2
47 µF
85
0.85±0.1
10 V
16 V
25 V
1.5±0.1
1.5±0.1
1.5±0.1
1.6±0.2
1.6±0.2
0.85±0.1
0.85±0.1
1.15±0.1
1.6±0.2
6.3 V
1.6±0.2
1.6±0.2
2.0±0.2
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-3 series is on request
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
6.3 V to 50 V
7
14
THICKNESS CLASSES AND PACKING QUANTITY
Table 5
SIZE
CODE
THICKNESS
CLASSIFICATION
TAPE WIDTH
QUANTITY PER REEL
0201
0.3 ±0.03 mm
0402
0603
0805
1206
Ø180 MM / 7 INCH
Ø330 MM / 13 INCH
Paper
Blister
Paper
Blister
QUANTITY
PER BULK CASE
8 mm
15,000
---
50,000
---
---
0.5 ±0.05 mm
8 mm
10,000
---
50,000
---
50,000
0.8 ±0.1 mm
8 mm
4,000
---
15,000
---
15,000
0.6 ±0.1 mm
8 mm
4,000
---
20,000
---
10,000
0.85 ±0.1 mm
8 mm
4,000
---
15,000
---
8,000
1.25 ±0.2 mm
8 mm
---
3,000
---
10,000
5,000
0.6 ±0.1 mm
8 mm
4,000
---
20,000
---
---
0.85 ±0.1 mm
8 mm
4,000
---
15,000
---
---
1.00 / 1.15 ±0.1 mm
8 mm
---
3,000
---
10,000
---
1.25 ±0.2 mm
8 mm
---
3,000
---
10,000
---
1.6 ±0.15 mm
8 mm
---
2,500
---
10,000
---
1.6 ±0.2 mm
8 mm
---
2,000
---
10,000
---
1210
1808
1812
0.6 / 0.7 ±0.1 mm
8 mm
---
4,000
---
15,000
---
0.85 ±0.1 mm
8 mm
---
4,000
---
10,000
---
1.15 ±0.1 mm
8 mm
---
3,000
---
10,000
---
1.15 ±0.15 mm
8 mm
---
3,000
---
10,000
---
1.25 ±0.2 mm
8 mm
---
3,000
---
---
---
1.5 ±0.1 mm
8 mm
---
2,000
---
---
---
1.6 / 1.9 ±0.2 mm
8 mm
---
2,000
---
---
---
2.0 ±0.2 mm
8 mm
---
2,000
1,000
---
---
---
2.5 ±0.2 mm
8 mm
---
1,000
500
---
---
---
1.15 ±0.15 mm
12 mm
---
3,000
---
---
---
1.25 ±0.2 mm
12 mm
---
3,000
---
---
---
1.35 ±0.15 mm
12 mm
---
2,000
---
---
---
1.5 ±0.1 mm
12 mm
---
2,000
---
---
---
1.6 ±0.2 mm
12 mm
---
2,000
---
---
---
2.0 ±0.2 mm
12 mm
---
2,000
---
---
---
0.6 / 0.85 ±0.1 mm
12 mm
---
2,000
---
---
---
1.15 ±0.1 mm
12 mm
---
1,000
---
---
---
1.25 ±0.2 mm
12 mm
---
1,000
---
---
---
1.5 ±0.1 mm
12 mm
---
1,000
---
---
---
1.6 ±0.2 mm
12 mm
---
1,000
---
---
---
2.0 ±0.2 mm
12 mm
---
1,000
---
---
---
2.5 ±0.2 mm
12 mm
---
500
50,000
---
---
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
8
14
6.3 V to 50 V
ELECTRICAL CHARACTERISTICS
Y5V DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
- Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 6
VALUE
DESCRIPTION
Capacitance range
10 nF to 47 µF
±20%
Capacitance tolerance
–20% to +80%
Dissipation factor (D.F.)
≤ 6.3 V
≤ 15%
Exception: 0805 ≥ 22 µF
≤ 20%
10 V
≤ 12.5%
Exception: 0402 ≥ 680 nF; 0603 ≥ 2.2 µF;
0805 ≥ 10 µF;
16 V
1206 ≥ 10 µF
≤ 15%
≤ 20%
≤ 12.5%
Exception: 0603 ≥ 4.7 µF
≥ 25 V
≤ 15%
≤ 9%
Exception: 0201 ≥ 10 nF
Insulation resistance after 1 minute at Ur (DC)
≤ 12.5%
Rins ≥ 10 GΩ or Rins × Cr ≥ 500 seconds whichever is less
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
Operating temperature range:
+22% to –82%
–30 °C to +85 °C
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
ΔC
C
(%)
General Purpose & High Cap.
YNM0019
25
10
25
35
50
60
75
85
50 V
10 V
Fig. 3
30
-5
20
55
70
T ( oC)
110
95
Fig. 4
Typical capacitance change as a function of
temperature
6.3 V to 50 V
YNM0020
15
ΔC
C
(%)
0
100
Y5V
9
14
0
10
25 V
16 V
20
30
40
50
V DC (V)
Typical capacitance change with respect to the
capacitance at 1 V as a function of DC voltage at
20 °C
MBD078
2000
tan δ
(x 10 4 )
1500
1000
500
0
25
Fig. 5
0
25
50
75
100
T ( oC)
Typical tan δ as a function of temperature
SOLDERING RECOMMENDATION
Table 7
SOLDERING
METHOD
SIZE
0402
0603
0805
1206
≥ 1210
Reflow
≥ 0.1 µF
≥ 1.0 µF
≥ 2.2 µF
≥ 4.7 µF
Reflow only
Reflow/Wave
< 0.1 µF
< 1.0 µF
< 2.2 µF
< 4.7 µF
---
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
6.3 V to 50 V
10
14
TESTS AND REQUIREMENTS
Table 8
Test procedures and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Mounting
IEC 60384- 4.3
21/22
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
No visible damage
Visual
inspection and
dimension
check
4.4
Any applicable method using × 10 magnification
In accordance with specification
Capacitance (1)
4.5.1
Class 2:
At 20 °C, 24 hrs after annealing
Within specified tolerance
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
Dissipation
factor (D.F.) (1)
4.5.2
Class 2:
At 20 °C, 24 hrs after annealing
In accordance with specification
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
Insulation
resistance
4.5.3
At Ur (DC) for 1 minute
In accordance with specification
Temperature
characteristic
4.6
Class 2:
Between minimum and maximum temperature
Y5V: -30 °C to +85 °C
Normal Temperature: 20 °C
<General purpose series>
∆C/C
Class 2:
Y5V: 22% to -82%
<High Capacitance series>
∆C/C
Class 2:
Y5V: 22% to -82%
Adhesion
4.7
A force applied for 10 seconds to the line joining the terminations Force
and in a plane parallel to the substrate
size ≥ 0603: 5N
size = 0402: 2.5N
size = 0201: 1N
NOTE:
1. For individual product specification, please contact local sales.
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Bond
strength of
plating on
end face
IEC 6038421/22
Mounting in accordance with IEC 60384-22
paragraph 4.3
No visible damage
Conditions: bending 1 mm at a rate of 1 mm/s,
radius jig 340 mm
<General purpose series>
4.8
6.3 V to 50 V
11
14
∆C/C
Class2:
Y5V: ±10%
<High Capacitance series>
∆C/C
Class2:
Y5V: ±10%
Resistance to
soldering
heat
4.9
Precondition: 150 +0/–10 °C for 1 hour, then keep
for 24 ±1 hours at room temperature
Preheating: for size ≤ 1206: 120 °C to 150 °C for 1
minute
Preheating: for size >1206: 100 °C to 120 °C for 1
minute and 170 °C to 200 °C for 1 minute
Solder bath temperature: 260 ±5 °C
Dipping time: 10 ±0.5 seconds
Recovery time: 24 ±2 hours
Dissolution of the end face plating shall not
exceed 25% of the length of the edge
concerned
<General purpose series>
∆C/C
Class2:
Y5V: ±20%
<High Capacitance series>
∆C/C
Class2:
Y5V: ±20%
D.F. within initial specified value
Rins within initial specified value
Solderability
4.10
Preheated the temperature of 80 °C to 140 °C and
maintained for 30 seconds to 60 seconds.
The solder should cover over 95% of the
critical area of each termination
Test conditions for lead containing solder alloy
Temperature: 235 ±5 °C
Dipping time: 2 ±0.2 seconds
Depth of immersion: 10 mm
Alloy Composition: 60/40 Sn/Pb
Number of immersions: 1
Test conditions for leadfree containing solder alloy
Temperature: 245 ±5 °C
Dipping time: 3 ±0.3 seconds
Depth of immersion: 10 mm
Alloy Composition: SAC305
Number of immersions: 1
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Rapid change
of
temperature
IEC 6038421/22
Preconditioning;
150 +0/–10 °C for 1 hour, then keep for
24 ±1 hours at room temperature
No visual damage
4.11
Y5V
6.3 V to 50 V
12
14
<General purpose series>
∆C/C
5 cycles with following detail:
30 minutes at lower category temperature
30 minutes at upper category temperature
Class2:
Y5V: ±20%
<High Capacitance series>
Recovery time 24 ±2 hours
∆C/C
Class2:
Y5V: ±20%
D.F. meet initial specified value
Rins meet initial specified value
Damp heat
with Ur load
4.13
1. Preconditioning, class 2 only:
150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp
2. Initial measure:
Spec: refer initial spec C, D, IR
3. Damp heat test:
500 ±12 hours at 40 ±2 °C;
90 to 95% R.H. 1.0 Ur applied
4. Recovery:
Class 2: 24 ±2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the
minimum value permitted, then after the other
measurements have been made the capacitor shall
be precondition according to “IEC 60384 4.1” and
then the requirement shall be met.
No visual damage after recovery
<General purpose series>
∆C/C
Class2:
Y5V: ±30%
D.F.
Class2:
Y5V: ≤ 15%
Rins
Class2:
Y5V: ≥ 500 MΩ or Rins x Cr ≥ 25s
whichever is less
<High Capacitance series>
∆C/C
Class2:
Y5V: ±30%
D.F.
Class2:
Y5V: 2 x initial value max
Rins
Class2:
Y5V: 500 MΩ or Rins x Cr ≥ 25s
whichever is less
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Endurance
IEC 6038421/22
1. Preconditioning, class 2 only:
No visual damage
4.14
150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp
2. Initial measure:
Spec: refer initial spec C, D, IR
3. Endurance test:
Temperature: Y5V: 85 °C
Specified stress voltage applied for 1,000 hours:
Applied 2.0 x Ur for general product.
Applied 1.5 x Ur for high cap. product.
4. Recovery time: 24 ±2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the minimum
value permitted, then after the other measurements
have been made the capacitor shall be precondition
according to “IEC 60384 4.1” and then the
requirement shall be met.
6.3 V to 50 V
13
14
<General purpose series>
∆C/C
Class2:
Y5V: ±30%
D.F.
Class2:
Y5V: ≤ 15%
Rins
Class2:
Y5V: ≥ 1,000 MΩ or Rins x Cr ≥ 50s
whichever is less
<High Capacitance series>
∆C/C
Class 2:
Y5V: ±30%
D.F.
Class 2:
Y5V: 2 x initial value max
Rins
Class 2:
Y5V: 1,000 MΩ or Rins x Cr ≥ 50s
whichever is less
Voltage proof
IEC 60384-1 4.6
Specified stress voltage applied for 1 minute
Ur ≤ 100 V: series applied 2.5 Ur
100 V < Ur ≤ 200 V series applied (1.5 Ur + 100)
200 V < Ur ≤ 500 V series applied (1.3 Ur + 100)
Ur > 500 V: 1.3 Ur
I: 7.5 mA
No breakdown or flashover
www.yageo.com
Jul 29, 2010 V.5
Product specification
Surface-Mount Ceramic Multilayer Capacitors
General Purpose & High Cap.
Y5V
6.3 V to 50 V
14
14
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 5
Jul 29, 2010
-
- Modify the last 2-digit of 12NC
Version 4
Jun 24, 2010
-
- Dimension on 1206 case size updated
Version 3
Apr 22, 2010
-
- Dimension updated
Version 2
Feb 04, 2010
-
- The statement of "Halogen Free" on the cover added
Version 1
Nov 04, 2009
-
- Ordering code updated
- Dimension updated
Version 0
Apr 15, 2009
-
- New datasheet for general purpose and high capacitance Y5V series with
RoHS compliant
- Replace the "6.3V to 50V" part of pdf files: Y5V_6.3V_10V_9_Preliminary,
Y5V_10V-to-50V_10_Preliminary, Y5V_16V_25V_50V_11
- Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2
and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2
- Define global part number
- Description of "Halogen Free compliant" added
- Test method and procedure updated
www.yageo.com
Jul 29, 2010 V.5
Similar pages