Aluminum Electrolytic Capacitors/ TP Radial Lead Type Series: TP Type: A ■ Features ● ● ● ● Endurance: 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h Smaller than series TA High ripple current (at high frequency) : 20 to 40% higher than TA series RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current Shelf Life 1 –40 °C to + 135 °C 25 V .DC to 35 V .DC 100 µF to 5100 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) W.V.(V) 25 35 (120Hz / +20 °C) tan δ 0.14 0.12 For capacitance value > 1000 µF , add 0.02 per every 1000 µF. After following life test with DC voltage and +125 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration φ8 : 2000 hours, φ10 : 3000 hours, φ12.5 : 4000 hours, φ16 to φ18 : 5000 hours Capacitance change ±30% of initial measured value tan δ < 300 % of initial specified value DC leakage current < initial specified value After following life test with DC voltage and +135 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration φ8 : 1000 hours, φ10 to φ18 : 2000 hours Capacitance change ±30% of initial measured value tan δ < 300 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life 2 After storage for 1000 hours at +135 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) tan δ Endurance 1 Endurance 2 ■ Frequency correction factor for ripple current W.V. (V.DC) Cap. (µF) 25 to 35 to to to 390 1200 330 1000 60 0.55 0.70 0.75 120 0.65 0.75 0.80 Frequency (Hz) 1k 0.85 0.90 0.90 10 k 0.90 0.95 0.95 ■ Dimensions in mm (not to scale) Sleeve 100 k 1.00 1.00 1.00 [mm] φ8 φd±0.05 φ10< + Pressure relief ✽L 14 min. 3 min. φD±0.5 F±0.5 – φD±0.5 ✽ L<16 : L±1.5 L>20 : L±2.0 Body Dia. φD Lead Dia. φd Lead space F 8 0.6 3.5 (mm) 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 18 0.8 7.5 00 Jan. 2011 Aluminum Electrolytic Capacitors/ TP ■ Standard Products Case size W.V. (V) 25 35 Cap. (±20 %) Dia. Length (µF) (mm) (mm) 220 10 12.5 330 10 16 8 20 470 10 16 510 10 16 820 10 20 1000 12.5 20 1200 12.5 20 12.5 25 1800 16 20 2000 16 20 16 25 2200 18 20 16 25 2700 18 20 16 31.5 3300 18 25 16 31.5 3900 18 25 4700 18 31.5 5100 18 31.5 100 10 12.5 120 10 12.5 8 20 220 10 16 8 20 270 10 16 330 10 20 390 10 20 470 12.5 20 560 12.5 20 620 12.5 20 820 12.5 25 1000 16 20 1200 16 20 16 25 1500 18 20 1600 16 25 16 31.5 1800 18 25 16 31.5 2000 18 25 2200 18 31.5 2700 18 31.5 Specification Ripple Ripple E.S.R tan δ Current Current 125 °C 135 °C (100 kHz) (120 kHz) Enduance Enduance (100 kHz) (100 kHz) (+20 °C) (+20 °C) (+125 °C) (+135 °C) (mA r.m.s.) (mA r.m.s.) () (hours) (hours) 3000 2000 580 500 0.190 0.14 3000 2000 1100 945 0.130 0.14 2000 1000 1060 760 0.067 0.14 3000 2000 1100 945 0.130 0.14 3000 2000 1100 945 0.130 0.14 3000 2000 1540 1100 0.052 0.14 4000 2000 1860 1490 0.038 0.14 4000 2000 1860 1490 0.038 0.14 4000 2000 2180 1750 0.030 0.14 5000 2000 2380 1985 0.029 0.14 5000 2000 2380 1985 0.029 0.16 5000 2000 2760 2300 0.022 0.16 5000 2000 2700 2250 0.028 0.16 5000 2000 2760 2300 0.022 0.16 5000 2000 2700 2250 0.028 0.16 5000 2000 3250 2710 0.018 0.18 5000 2000 2960 2470 0.020 0.18 5000 2000 3250 2710 0.018 0.18 5000 2000 2960 2470 0.020 0.18 3480 2900 0.016 0.20 5000 2000 3480 2900 0.016 0.22 5000 2000 580 500 0.190 0.12 3000 2000 3000 2000 580 500 0.190 0.12 2000 1000 1060 760 0.067 0.12 3000 2000 1100 945 0.130 0.12 2000 1000 1060 760 0.067 0.12 1100 945 0.130 0.12 3000 2000 3000 2000 1540 1100 0.052 0.12 3000 2000 1540 1100 0.052 0.12 4000 2000 1860 1490 0.038 0.12 4000 2000 1860 1490 0.038 0.12 4000 2000 1860 1490 0.038 0.12 4000 2000 2180 1750 0.030 0.12 5000 2000 2380 1985 0.029 0.12 5000 2000 2380 1985 0.029 0.12 5000 2000 2760 2300 0.022 0.12 5000 2000 2700 2250 0.028 0.12 5000 2000 2760 2300 0.022 0.12 5000 2000 3250 2710 0.018 0.12 5000 2000 2960 2470 0.020 0.12 5000 2000 3250 2710 0.018 0.14 5000 2000 2960 2470 0.020 0.14 5000 2000 3480 2900 0.016 0.14 5000 2000 3480 2900 0.016 0.14 Lead Length Lead Space Lead Dia. Taping Straight ✽ B (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 (mm) 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 (mm) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUTP1E221( ) EEUTP1E331( ) EEUTP1E471L( ) EEUTP1E471( ) EEUTP1E511( ) ✽ EEUTP1E821( ) EEUTP1E102( ) EEUTP1E122( ) EEUTP1E182( ) EEUTP1E182S( ) EEUTP1E202S( ) ✽ EEUTP1E222( ) EEUTP1E222S( ) EEUTP1E272( ) EEUTP1E272S( ) EEUTP1E332 EEUTP1E332S( ) EEUTP1E392 EEUTP1E392S( ) EEUTP1E472 EEUTP1E512 ✽ EEUTP1V101( ) EEUTP1V121( ) EEUTP1V221L( ) EEUTP1V221( ) EEUTP1V271L( ) EEUTP1V271( ) EEUTP1V331( ) EEUTP1V391( ) EEUTP1V471( ) EEUTP1V561( ) EEUTP1V621( ) ✽ EEUTP1V821( ) EEUTP1V102( ) EEUTP1V122( ) EEUTP1V152( ) EEUTP1V152S( ) EEUTP1V162( ) ✽ EEUTP1V182 EEUTP1V182S( ) EEUTP1V202 ✽ EEUTP1V202S( ) ✽ EEUTP1V222 EEUTP1V272 Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 50 50 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 50 50 (pcs) 500 500 1000 500 500 500 500 500 500 250 250 250 250 250 250 250 250 500 500 1000 500 1000 500 500 500 500 500 500 500 250 250 250 250 250 250 250 ✽ : Substandard (E24series numbers) When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Jun. 2011