P-DUKE DU1P0-05D15 1 watts dc-dc converter Datasheet

DU1P0 SERIES
1 WATTS
DC-DC CONVERTER
FEATURES
• 1 WATT UNREGULATED OUTPUT POWER
• OUTPUT CURRENT UP TO 0.2A
• SINGLE -IN-LINE PACKAGE (SIP)
• HIGH EFFICIENCY FOR LOW POWER APPLICATION
• INPUT RANGE FROM 4.5VDC TO 5.5VDC, 10.8VDC TO 13.2 VDC,
13.5VDC TO 16.5VDC AND 21.6VDC TO 26.4VDC
• UL 94-V0 NON-CONDUCTED CASE
• INTERNAL INPUT & OUTPUT FILTER
• INPUT TO OUTPUT ISOLATION UP:3kVDC, MIN.
• SUFFIX-N ISOLATION LEVEL REINFORCE
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTION
3kVDC ISOLATION
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The DU1P0 series are the standard building blocks for on-board
distributed power systems. They are ideally suited to provide single and
dual supplies on primarily digital boards with added benefit of galvanic
isolation to reduce switching noise.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
1 Watt, max.
Voltage accuracy
Minimum load (Note 5)
10% of FL
Line regulation
LL to HL at Full Load
Load regulation
20% to 100% FL
Ripple and noise
20MHz bandwidth
1.3% / 1% of Vin
5V output
others
± 10%
± 8%
See table
±0.1% / ºC, max.
Temperature coefficient
Short circuit protection (Note 6)
1 Sec, max.
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Input to Output
Isolation resistance
500VDC
Standard 1000VDC, min. 1minute
Suffix-N 3000VDC, min. 1minute
Switching frequency
60kHz, min.
C type
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
Storage temperature range
-25ºC ~ +85ºC
(with derating)
-55ºC ~ +125ºC
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
IEC60950-1, UL60950-1, & EN60950-1
Case material
Non-conductive black plastic
Base material
None
Potting material
Epoxy (UL94 V-0)
0.77 X 0.24 X 0.40 Inch
(19.6 X 6.1 X 10.2 mm)
Dimensions
Weight
Page 1 of 2
Input filter
4.5 ~ 5.5VDC
10.8 ~ 13.2VDC
13.5 ~ 16.5VDC
21.6 ~ 26.4VDC
9
30pF, max.
MTBF (Note 1)
5VDC nominal input
12VDC nominal input
15VDC nominal input
24VDC nominal input
10 ohms, min.
Isolation capacitance
Safety approvals
Input voltage range
± 5%
2.0g (0.071oz)
MIL-HDBK-217F
2.019 x 107 hrs
www.pduke.com
2014/4/30
DU1P0 SERIES
1 WATTS
DC-DC CONVERTER
Output Current
Model
Number
Input
Range
Output
Voltage
Min. load
DU1P0-05S05
DU1P0-05S12
DU1P0-05S15
DU1P0-05D05
DU1P0-05D12
DU1P0-05D15
DU1P0-12S05
DU1P0-12S12
DU1P0-12S15
DU1P0-12D05
DU1P0-12D12
DU1P0-12D15
DU1P0-15S05
DU1P0-15S12
DU1P0-15S15
DU1P0-15D05
DU1P0-15D12
DU1P0-15D15
DU1P0-24S05
DU1P0-24S12
DU1P0-24S15
DU1P0-24D05
DU1P0-24D12
DU1P0-24D15
4.5 ~ 5.5 VDC
4.5 ~ 5.5 VDC
4.5 ~ 5.5 VDC
4.5 ~ 5.5 VDC
4.5 ~ 5.5 VDC
4.5 ~ 5.5 VDC
10.8 ~ 13.2 VDC
10.8 ~ 13.2 VDC
10.8 ~ 13.2 VDC
10.8 ~ 13.2 VDC
10.8 ~ 13.2 VDC
10.8 ~ 13.2 VDC
13.5 ~ 16.5 VDC
13.5 ~ 16.5 VDC
13.5 ~ 16.5 VDC
13.5 ~ 16.5 VDC
13.5 ~ 16.5 VDC
13.5 ~ 16.5 VDC
21.6 ~ 26.4 VDC
21.6 ~ 26.4 VDC
21.6 ~ 26.4 VDC
21.6 ~ 26.4 VDC
21.6 ~ 26.4 VDC
21.6 ~ 26.4 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
20mA
8.3mA
6.7mA
± 10mA
± 4.2mA
± 3.3mA
20mA
8.3mA
6.7mA
± 10mA
± 4.2mA
± 3.3mA
20mA
8.3mA
6.7mA
± 10mA
± 4.2mA
± 3.3mA
20mA
8.3mA
6.7mA
± 10mA
± 4.2mA
± 3.3mA
(3)
Output
Full load Ripple & Noise
200mA
83mA
67mA
± 100mA
± 42mA
± 33mA
200mA
83mA
67mA
± 100mA
± 42mA
± 33mA
200mA
83mA
67mA
± 100mA
± 42mA
± 33mA
200mA
83mA
67mA
± 100mA
± 42mA
± 33mA
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
No load
Input Current
Eff
(%)
Capacitor
Load
(4)
max
42mA
32mA
35mA
40mA
35mA
40mA
17mA
17mA
18mA
18mA
18mA
18mA
20mA
18mA
18mA
18mA
16mA
16mA
12mA
12mA
10mA
12mA
10mA
10mA
77
82
81
78
82
81
77
82
79
77
81
82
73
79
80
75
80
80
72
78
78
75
78
79
330µF
330µF
330µF
±150µF
±150µF
±150µF
330µF
330µF
330µF
±150µF
±150µF
±150µF
330µF
330µF
330µF
±150µF
±150µF
±150µF
330µF
330µF
330µF
±150µF
±150µF
±150µF
(2)
(3)
Note
1.
2.
3.
4.
5.
MIL-HDBK-217F @Ta=25 ºC, Full load.
Typical value at nominal input voltage and no load.
Typical value at nominal input voltage and full load.
Test by minimum Vin and constant resistive load.
The output requires a minimum loading on the output to maintain specified regulation.
Operation under no-load condition will not damage these devices, however they may not meet all
listed specification.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
MECHANICAL DRAWING
:
STANDARD
PIN
1
2
4
5
6
SINGLE
+INPUT
-INPUT
-OUTPUT
NC
+OUTPUT
DUAL
+INPUT
-INPUT
-OUTPUT
COMMON
+OUTPUT
“SUFFIX-N” Models
PIN
1
2
SINGLE
+INPUT
-INPUT
DUAL
+INPUT
-INPUT
5
6
7
-OUTPUT
NC
+OUTPUT
-OUTPUT
COMMON
+OUTPUT
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01 (0.25)
3. Pin dimension tolerance ±0.004 (0.1)
Page 2 of 2
www.pduke.com
2014/4/30
Similar pages