CSD3120H CSD3160H Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Single SCR POW-R-BLOK™ Modules 400 Amperes/1200-1600 Volts Description: Powerex Single SCR POW-R-BLOK™ Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on common heatsinks. A B L - DIA. (2 TYP.) A K E K G H M M F Features: .110 TAB K C D G J M Isolated Mounting M Metal Baseplate M Low Thermal Impedance Applications: K A CSD3120H, CSD3160H Single SCR POW-R-BLOK™ Modules 400 Amperes/1200-1600 Volts G K M Solid State Starters M By-Pass Switch Outline Drawing M AC and DC Motor Control Dimension A B Inches 3.15 2.559±0.012 Millimeters 80 65±0.3 C 2.56 65 D 2.52 64 E 1.81 46 F 1.48 36 G 1.18 30 H 0.87 22 J 0.35 9 K 0.28 7 L M 0.216 Dia. 0.08 Ordering Information: Select the complete eight digit module part number you desire from the table below. Example: CSD3120H is a 1200 Volt, 400 Ampere Single SCR POW-R-BLOK™ Module. Type CSD3 Voltage Volts (x100) Current Rating Amperes (400) 12 16 0H Dia. 5.5 2 S-5 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CSD3120H, CSD3160H Single SCR POW-R-BLOK™ Modules 400 Amperes/1200-1600 Volts Absolute Maximum Ratings Characteristics Symbol CSD3120H CSD3160H Units Peak Forward Blocking Voltage VDRM VDSM 1200 1600 Volts 1350 1700 Volts Transient Peak Forward Blocking Voltage (Non-Repetitive) t < 5ms DC Forward Blocking Voltage Peak Reverse Blocking Voltage Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms DC Reverse Blocking Voltage RMS On-State Current VRSM VR(DC) IT(RMS) 960 1280 Volts 1200 1600 Volts 1350 1700 Volts 960 1280 Volts 620 620 Amperes 400 400 Amperes 8000 Average On-State Current, TC = 66°C Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) IT(AV) ITSM 8000 Amperes Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) 7300 7300 Amperes I2t (for Fusing), 8.3 milliseconds ITSM I2t 267,000 267,000 Critical Rate-Of-Rise of On-State Current* di/dt 100 100 10 10 Watts 3 3 Watts 10 10 Volts Peak Gate Power Dissipation Average Gate Power Dissipation Peak Forward Gate Voltage Peak Reverse Gate Voltage Peak Forward Gate Current Storage Temperature Operating Temperature Maximum Mounting Torque M5 Mounting Screw PGM PG(AV) VGFM VGRM IGFM 5.0 TSTG Tj -40 to 125 -40 to 125 — A2sec Amperes/ms 5.0 Volts 4.0 4.0 Amperes -40 to 125 -40 to 125 17 17 °C °C in.-lb. Maximum Mounting Torque M8 Terminal Screw — 72 72 in.-lb. Module Weight (Typical) — 450 450 Grams 2500 2500 V Isolation *Tj = 125°C, IG = 1.0A, VD = 1/2 VDRM S-6 VD(DC) VRRM VRMS Volts Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CSD3120H, CSD3160H Single SCR POW-R-BLOK™ Modules 400 Amperes/1200-1600 Volts Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions IDRM IRRM Tj = 125°C, VDRM = Rated 40 mA Tj = 125°C, VRRM = Rated 40 mA Conducting State Maximums Peak On-State Voltage VFM ITM = 1200A Switching Minimums Critical Rate-Of-Rise of Off-State Voltage dv/dt Tj = 125°C, VD = 2/3 VDRM Ru(J-C) Ru(C-S) Per Module 0.1 °C/Watt Per Module 0.08 °C/Watt IGT VGT VD = 6V, RL = 2Ω VD = 6V, RL = 2Ω VGDM Tj = 125°C, VD = 1/2 VDRM Blocking State Maximums Forward Leakage Current, Peak Reverse Leakage Current, Peak Thermal Maximums Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink (Lubricated) Gate Parameters Maximums Gate Current to Trigger Gate Voltage to Trigger Non-Triggering Gate Voltage CSD3120H/CSD3160H 1.4 500 100 Units Volts Volts/ms mA 3.0 Volts 0.25 Volts S-7 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CSD3120H, CSD3160H Single SCR POW-R-BLOK™ Modules 400 Amperes/1200-1600 Volts MAXIMUM ALLOWABLE PEAK SURGE (NON-REPETITIVE) CURRENT 102 10000 Tj = 125oC 2.2 1.8 1.4 1.0 8000 6000 4000 2000 102 103 104 100 101 MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) 0.100 0.075 0.050 0.025 0 10-3 10-2 10-1 o 90o 120 u 360o 600 60o RESISTIVE, INDUCTIVE LOAD PER SINGLE ELEMENT 400 u = 30o 180o 200 0 0 100 200 300 400 MAXIMUM AVERAGE ON-STATE POWER DISSIPATION (RECTANGULAR WAVEFORM) MAXIMUM ALLOWABLE CASE TEMPERATURE (RECTANGULAR WAVEFORM) 270o 600 60o 90o 120o DC u = 30o 400 200 u 360o RESISTIVE, INDUCTIVE LOAD PER SINGLE ELEMENT 0 0 200 400 600 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 800 100 PG(AV) = 3.0W Tj = 25oC IGFM = 4.0A VGDM = 0.25V 102 103 104 MAXIMUM ALLOWABLE CASE TEMPERATURE (SINUSOIDAL WAVEFORM) AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 180o IGT = 100mA MAXIMUM ON-STATE POWER DISSIPATION (SINUSOIDAL WAVEFORM) TIME, t, (SECONDS) 800 VGT = 3.0V INSTANTANEOUS GATE CURRENT, IG, (mA) 800 100 MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC) MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) TRANSIENT THERMAL IMPEDANCE, Zu(J-C)(t), (oC/WATT) 0.125 102 PGM = 10W CYCLES AT 60 HZ INSTANTANEOUS ON-STATE CURRENT, ITM, (AMPERES) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (JUNCTION-TO-CASE) 100 101 VGFM = 10V 101 10-1 101 0 u 360o 110 RESISTIVE, INDUCTIVE LOAD PER SINGLE ELEMENT 100 90 80 70 60 120o u = 30o 60o 90o 50 0 200 400 180o 270o 600 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 130 120 u 360o 110 RESISTIVE, INDUCTIVE LOAD PER SINGLE ELEMENT 100 90 80 70 u = 30o 60 60o 90o 120o DC 800 180o 50 0 100 200 300 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 130 120 MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC) 0.6 101 S-8 TRIGGERING CHARACTERISTICS INSTANTANEOUS GATE VOLTAGE, VG, (VOLTS) 2.6 MAXIMUM PEAK SURGE (NON-REPETITIVE) CURRENT, ITSM, (AMPERES) INSTANTANEOUS ON-STATE VOLTAGE, VTM, (VOLTS) MAXIMUM ON-STATE CHARACTERISTICS 400