All-4-One™ International Transformers Chassis Mount International Standards at Lower Cost and Better Performance SM Designed to provide the high isolation, creepage and clearance necessary to comply with international safety standards. General Specifications • Power - 25 VA to 175 VA • Dielectric Strength - 4000 VRMS Hipot • Primaries - Dual primaries (115/230 V - 50/60 Hz) • Dual Secondaries - Series or parallel • Terminals - Solder lug / quick connect type terminals • Leakage - Current meets UL 60601-1, IEC/EN 60601-1 • Insulation - Class F (155º C) • Flammability Rating - Bobbin and shroud material meet UL 94-V0 Agency Certifications • UL 1446 E66312 • UL recognized to UL 506, File # E63829 • CSA certified to C22.2 #66, File # 221070 • VDE certified to VDE 0805 / EN 60950, File # 1448 • Agency certified versions available with lead wires Part Number VA Secondary RMS Rating Size Series Parallel A41-25-10 25 10VCT @ 2.5A 5V @ 5.0A A41-43-10 43 10VCT @ 4.3A 5V @ 8.6A A41-80-10 80 10VCT @ 8.0A 5V @ 16.0A A41-130-10 130 10VCT @ 13.0A 5V @ 26.0A A41-175-10 175 10VCT @ 17.5A 5V @ 35.0A A41-25-12 25 12.6VCT @ 2.0A 6.3V @ 4.0A A41-43-12 43 12.6VCT @ 3.4A 6.3V @ 6.8A A41-80-12 80 12.6VCT @ 6.3A 6.3V @ 12.6A A41-130-12 130 12.6VCT @ 10.3A 6.3V @ 20.6A A41-175-12 175 12.6VCT @ 14.0A 6.3V @ 28.0A A41-25-16 25 16VCT @ 1.6A 8V @ 3.2A A41-43-16 43 16VCT @ 2.7A 8V @ 5.4A A41-80-16 80 16VCT @ 5.0A 8V @ 10.0A A41-130-16 130 16VCT @ 8.1A 8V @ 16.2A A41-175-16 175 16VCT @ 11.0A 8V @ 22.0A A41-25-20 25 20VCT @ 1.25A 10V @ 2.5A A41-43-20 43 20VCT @ 2.2A 10V @ 4.4A A41-80-20 80 20VCT @ 4.0A 10V @ 8.0A A41-130-20 130 20VCT @ 6.5A 10V @ 13.0A A41-175-20 175 20VCT @ 8.8A 10V @ 17.6A A41-25-24 25 24VCT @ 1.0A 12V @ 2.0A A41-43-24 43 24VCT @ 1.8A 12V @ 3.6A A41-80-24 80 24VCT @ 3.3A 12V @ 6.6A A41-130-24 130 24VCT @ 5.4A 12V @ 10.8A A41-175-24 175 24VCT @ 7.3A 12V @ 14.6A A41-25-28 25 28VCT @ 0.9A 14V @ 1.86A A41-43-28 43 28VCT @ 1.5A 14V @ 3.0A A41-80-28 80 28VCT @ 2.8A 14V @ 5.6A A41-130-28 130 28VCT @ 4.6A 14V @ 9.2A A41-175-28 175 28VCT @ 6.25A 14V @ 12.5A A41-25-36 25 36VCT @ 0.7A 18V @ 1.4A A41-43-36 43 36VCT @ 1.2A 18V @ 2.4A A41-80-36 80 36VCT @ 2.2A 18V @ 4.4A A41-130-36 130 36VCT @ 3.6A 18V @ 7.2A A41-175-36 175 36VCT @ 4.8A 18V @ 9.6A A41-25-230 25 230VCT @ 0.11A 115V @ 0.22A A41-43-230 43 230VCT @ 0.19A 115V @ 0.38A A41-80-230 80 230VCT @ 0.35A 115V @ 0.7A A41-130-230 130 230VCT @ 0.57A 115V @ 1.14A A41-175-230 175 230VCT @ 0.76A 115V @ 1.52A � � ���� �������� � � � �� ���� �������� �� � �� ����������������������� Note: VDE certified lead wire versions available. ©2006 Signal Transformer Inc. Specifications subject to change without notice. 07.06 500 Bayview Avenue, Inwood, NY 11096 Toll Free 866-239-5777 • Tel 516-239-5777 • Fax 516-239-7208 [email protected] • [email protected] www.signaltransformer.com 1 All-4-One™ International Transformers Chassis Mount International Standards at Lower Cost and Better Performance Dimensions Mounting DImenstions Terminals VA L W H A B C Inches (mm) Size Inches (mm) SM Weight Mounting Style ML MW Mounting Screw lbs (kg) 25 2.81 (71.4) 2.14 (54.4) 2.31 (58.7) 2.00 (50.8) 1.12 (28.6) .31 (7.9) .187 (4.75) C 2.37 (60.3) – #6 1.25 lbs (0.57) 43 3.12 (79.4) 2.14 (54.4) 2.68 (68.2) 2.25 (57.2) 1.12 (28.6) .31 7.9) .187 (4.75) C 2.81 (71.4) – #6 1.6 lbs (0.73) 80 2.50 (63.5) 2.52 (64.3) 3.00 (76.2) – 1.37 (35.0) .31 (7.9) .187 (4.75) B 2.00 (50.8) 2.18 (55.5) #6 2.8 lbs (1.27) 130 2.81 (71.4) 3.00 (76.2) 3.37 (85.7) – 1.62 (41.3) .37 (9.5) 0.25 (6.35) B 2.25 (57.2) 2.50 (63.5) #8 4.1 lbs (1.86) 175 3.12 (79.4) 3.14 (79.7) 3.75 (95.3) – 1.62 (41.3) .37 (9.5) 0.25 (6.35) B 2.50 (63.5) 2.50 (63.5) #8 5.5 lbs (2.49) ©2006 Signal Transformer Inc. Specifications subject to change without notice. 07.06 500 Bayview Avenue, Inwood, NY 11096 Toll Free 866-239-5777 • Tel 516-239-5777 • Fax 516-239-7208 [email protected] • [email protected] www.signaltransformer.com 2