ASMT-Jx3x 3W Mini Power LED Light Source Data Sheet Description Features The 3W Mini Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. Option with electrically isolated metal slug is also available. Available in Deep Red, Red, Red Orange, Amber, Green, Blue, Royal Blue, Cool White, Neutral White and Warm White Small footprint and low profile Symmetrical outline Energy efficient Direct heat transfer from metal slug to mother board Compatible with reflow soldering process High current operation Long operation life Wide viewing angle Silicone encapsulation Non-ESD sensitive (threshold > 16kV) MSL 1 products The White Mini Power LED is available in the range of color temperature from 2700K to 10000K. The low profile package design and ultra small footprint is suitable for a wide variety of applications especially where space and height is a constraint. The package is compatible with reflow soldering process. To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. Applications Sign backlight Safety, exit and emergency sign lightings Specialty lighting such as task lighting and reading lights Retail display Commercial lighting Accent or marker lightings, strip or step lightings Portable lightings, bicycle head lamp, torch lights. Decorative lighting Architectural lighting Pathway lighting Street lighting Pedestrian street lighting Tunnel lighting Horticulture CAUTION: Customer is advised to keep the LEDs in the MBB when not in use as prolonged exposure to environment might cause the silver plated leads to tarnish, which might cause difficulties in soldering. Package Dimensions 5.0 4.0 Ø 3.7 4.0 0.7 1.0 0.8 Lens Cathode Mark 0.3 1.85 Anode Lead NC NC NC Metal Slug 0.65 Body NC Cathode Lead 0.60 Ø 1.70 Figure 1. ASMT-Jx3x package outline drawing Notes: 1. All dimensions in millimeters. 2. Metal slug is connected to anode for electrically non-isolated option. 3. Tolerance is ±0.1 mm unless otherwise specified. 4. Terminal finish: Ag plating. 5. Corresponding NC (No Connection) leads adjacent to anode and cathode leads can be electrically short. 2 Part Numbering System ASMT- J x1 3 x2 – x3 x4 x5 x6 x7 Packaging Option Color Bin Selection Maximum Flux Bin Selection Minimum Flux Bin Selection Dice Type N – InGaN A – AlInGaP Heat Sink 0 – Electrically Non-isolated 1 – Electrically Isolated Color D – Deep Red R – Red H – Red Orange A – Amber G – Green B – Blue L – Royal Blue W – Cool White N – Neutral White Y – Warm White Note: 1. Please refer to Page 10 for selection details. Device Selection Guide (TJ = 25°C) Luminous Flux (lm) / Radiometric Power (mW), ΦV [1,2] Dice Technology Electrically Isolated Metal Slug Color Min. Typ. Max. Test Current (mA) ASMT-JD30-ALN01 Deep Red 175mW 240mW 355mW 350 AllnGaP No ASMT-JR30-AST01 Red 51.7 58.0 87.4 350 AllnGaP No ASMT-JH30-ARS01 Red Orange 39.8 48.0 67.2 350 AllnGaP No Part Number ASMT-JA30-ARS01 Amber 39.8 48.0 67.2 350 AllnGaP No ASMT-JG31-NTU01 Green 67.2 78.0 99.6 350 InGaN Yes ASMT-JB31-NMP01 Blue 13.9 20.0 30.6 350 InGaN Yes 18.1 25.0 30.6 350 InGaN Yes 355 mW 435 mW 515 mW 350 InGaN Yes 355 mW 450 mW 595 mW 350 InGaN Yes 67.2 85.0 113.6 350 InGaN Yes 87.4 95.0 113.6 350 InGaN Yes 67.2 85.0 113.6 350 InGaN Yes 87.4 95.0 113.6 350 inGaN Yes 51.7 70.0 99.6 350 InGaN Yes ASMT-JB31-NNP01 ASMT-JL31-NPQ01 Royal Blue ASMT-JL31-NPR01 ASMT-JW31-NTV01 Cool White ASMT-JW31-NUV01 ASMT-JN31-NTV01 Neutral White ASMT-JN31-NUV01 ASMT-JY31-NSU01 Warm White Notes: 1. ΦV is the total luminous flux / radiometric power output as measured with an integrating sphere at 25 ms mono pulse condition. 2. Flux tolerance is ±10% 3 Absolute Maximum Ratings Parameter AllnGaP InGaN Units DC Forward Current [1] 700 700 mA Peak Pulsing Current 1500 2400 mA Power Dissipation 1820 2730 mW LED Junction Temperature 125 135 °C Operating Metal Slug Temperature Range at 350 mA -40 to +115 -40 to +120 °C Operating Metal Slug Temperature Range at 700 mA -40 to +100 -40 to +105 °C Storage Temperature Range -40 to +120 -40 to + 120 °C Soldering Temperature Refer to Figure. 25 Reverse Voltage [2] Not recommended Note: 1. Derate linearly based on Figure 9 for AlInGaP and Figure 21 for InGaN. 2. Not designed for reverse bias operation. Optical Characteristics at 350 mA (TJ = 25°C) Peak Wavelength, PEAK (nm) Dominant Wavelength, D [1] (nm) Viewing Angle, 2½ [2] (°) Luminous Efficiency (lm/W) Part Number Color Typ. Typ. Typ. Typ. ASMT-JD30-ALN01 Deep Red 660 640 165 Not Applicable ASMT-JR30-AST01 Red 635 625 165 79 ASMT-JH30-ARS01 Red Orange 625 615 165 65 ASMT-JA30-ARS01 Amber 598 590 165 65 ASMT-JG31-NTU01 Green 519 525 165 70 ASMT-JB31-NMP01 Blue 454 460 165 18 454 460 165 22 450 455 165 Not Applicable 450 455 165 Not Applicable Correlated Color Temperature, CCT (Kelvin) Viewing Angle, 2½ [2] (°) Luminous Efficiency (lm/W) ASMT-JB31-NNP01 ASMT-JL31-NPQ01 Royal Blue ASMT-JL31-NPR01 Part Number Color Min. Max. Typ. Typ. ASMT-JW31-NTV01 Cool White 4500 10000 140 76 4500 10000 140 85 ASMT-JW31-NUV01 ASMT-JN31-NTV01 Neutral White ASMT-JN31-NUV01 ASMT-JY31-NSU01 Warm White 3500 4500 140 76 3500 4500 140 85 2700 3500 140 63 Notes: 1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. ½ is the off-axis angle where the luminous intensity is ½ the peak intensity. 4 Electrical Characteristic at 350 mA (TJ = 25°C) Forward Voltage, VF (Volts) Thermal Resistance, Rj-ms(°C/W) [1] Dice Type Min. Typ Max. Typ. AllnGaP 1.7 2.1 2.3 9 InGaN 2.8 3.2 3.5 9 Note: 1. Rj-ms is Thermal Resistance from LED junction to metal slug. Optical and Electrical Characteristic at 700 mA (TJ = 25°C) Luminous Flux (lm) / Radiometric Power (mW), V Forward Voltage, VF (Volts) Color Typ. Typ. ASMT-JD30-ALN01 Deep Red 480mW 2.4 ASMT-JR30-AST01 Red 104.0 2.4 ASMT-JH30-ARS01 Red Orange 86.0 2.4 Part Number ASMT-JA30-ARS01 Amber 86.0 2.4 ASMT-JG31-NTU01 Green 125.0 3.6 ASMT-JB31-NMP01 Blue 34.0 3.6 43.0 3.6 740 mW 3.6 765 mW 3.6 ASMT-JB31-NNP01 ASMT-JL31-NPQ01 Royal Blue ASMT-JL31-NPR01 ASMT-JW31-NTV01 Cool White ASMT-JW31-NUV01 ASMT-JN31-NTV01 Neutral White ASMT-JN31-NUV01 ASMT-JY31-NSU01 5 Warm White 150.0 3.6 160.0 3.6 150.0 3.6 160.0 3.6 120.0 3.6 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 AMBER RED ORANGE RED DEEP RED RELATIVE LUMINOUS FLUX/ RADIOMETRIC POWER (NORMALIZED AT 350 mA) RELATIVE INTENSITY AlInGaP 520 535 550 565 580 595 610 625 640 655 670 685 700 WAVELENGTH - nm 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 0 0.5 1 1.5 FORWARD VOLTAGE - V 2 2.5 Figure 4. Forward Current vs. Forward Voltage. 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 1.60 D= 0.05 0.10 0.25 0.50 1.00 1.40 1.20 1.00 Ip - PULSE CURRENT - A Ip - PULSE CURRENT - A 100 200 300 400 500 DC FORWARD CURRENT - mA 600 700 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 1.80 1.60 0.80 0.60 0.40 D= 0.20 0.001 0.01 tp tp T 0.1 1 Figure 6. Maximum pulse current vs. ambient temperature. Derated based on TA = 25°C, RJ-A = 30°C/W. 10 1.40 D= tp T 1.20 tp IF T D= 0.05 0.10 0.25 0.50 1.00 1.00 0.80 0.60 0.40 IF T tp - PULSE DURATION - sec 6 0 Figure 5. Radiation Pattern Deep Red, Red, Red Orange and Amber. 1.80 0.00 0.00001 0.0001 OTHERS DEEP RED Figure 3. Relative Luminous Flux/ Radiometric Power vs. Mono Pulse Current. NORMALIZED INTENSITY FORWARD CURRENT - mA Figure 2. Relative Intensity vs. Wavelength for Deep Red, Red, Red Orange and Amber. 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0.20 100 0.00 0.00001 0.0001 0.001 0.01 0.1 1 tp - PULSE DURATION - sec Figure 7. Maximum pulse current vs. ambient temperature. Derated based on TA = 85°C, RJ-A = 30°C/W. 10 100 1.00 FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25°C) RELATIVE LIGHT OUTPUT - % (NORMALIZED AT 25°C) 240.0 220.0 200.0 180.0 160.0 140.0 120.0 100.0 80.0 60.0 40.0 20.0 0.0 DEEP RED RED RED-ORANGE AMBER 0 25 50 75 100 JUNCTION TEMPERATURE,TJ - °C Figure 8. Relative Light Output vs. Junction Temperature. -25 0.20 0.00 -0.20 700 700 600 500 RTJ-A = 20°C/W RTJ-A = 25°C/W RTJ-A = 30°C/W 300 200 100 0 20 40 60 80 100 AMBIENT TEMPERATURE, TA - °C 120 Figure 10. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 125°C, RJ-A = 20°C/W, 25°C/W and 30°C/W. -50 -25 0 25 50 75 JUNCTION TEMPERATURE,TJ - °C 100 125 Figure 9. Forward Voltage Shift vs. Junction Temperature. 800 0 7 0.40 800 400 DEEP RED RED RED ORANGE AMBER 0.60 -0.40 125 MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA -50 0.80 140 600 500 400 RTJ-MS = 9°C/W 300 200 100 0 0 20 40 60 80 100 METAL SLUG TEMPERATURE, TMS - °C 120 Figure 11. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 125°C, RJ-MS = 9°C/W. 140 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 WARM WHITE COOL WHITE 380 430 480 530 580 630 WAVELENGTH - nm 680 730 RELATIVE INTENSITY RELATIVE INTENSITY InGaN 780 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 Figure 13. Relative Intensity vs. Wavelength for Blue and Green. FORWARD CURRENT - mA RELATIVE LUMINOUS FLUX (NORMALIZED AT 350 mA) Figure 12. Relative Intensity vs. Wavelength for Cool and Warm White. 0 100 200 300 400 500 MONO PULSE CURRENT - mA 600 700 BLUE GREEN -90 -60 -30 0 30 ANGULAR DISPLACEMENT - DEGREES Figure 16. Radiation Pattern for Blue and Green. 8 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 FORWARD VOLTAGE - V 3 3.5 4 Figure 15. Forward Current vs. Forward Voltage. NORMALIZED INTENSITY NORMALIZED INTENSITY Figure 14. Relative Luminous Flux vs. Mono Pulse Current. 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 1 0.9 GREEN 0.8 BLUE ROYAL BLUE 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 405 430 455 480 505 530 555 580 605 630 WAVELENGTH - nm 60 90 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES Figure 17. Radiation Pattern for Cool White and Warm White. 90 D= tp tp T IF T IP - PULSE CURRENT - A IP - PULSE CURRENT - A 3.00 2.80 2.60 2.40 2.20 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 0.00001 0.0001 D= 0.05 0.10 0.25 0.50 1.00 0.001 0.01 0.1 1 10 100 3.00 2.80 2.60 2.40 2.20 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 0.00001 0.0001 tp - PULSE DURATION - sec FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25°C) RELATIVE LIGHT OUTPUT - % (NORMALIZED AT 25°C) 0 25 50 75 100 JUNCTION TEMPERATURE, TJ -°C 125 700 700 MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA 800 600 500 400 RTJ-A = 20°C/W RTJ-A = 25°C/W RTJ-A = 30°C/W 200 100 0 20 40 60 80 100 AMBIENT TEMPERATURE, TA - °C D= 0.05 0.10 0.25 0.50 1.00 0.001 0.01 0.1 1 10 100 BLUE ROYAL BLUE WHITE GREEN -50 -25 0 25 50 75 100 JUNCTION TEMPERATURE, TJ -°C 125 150 Figure 21. Forward Voltage Shift vs. Junction Temperature. 800 0 120 Figure 22. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 135°C, RJ-A = 20°C/W, 25°C/W and 30°C/W 9 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 -0.05 -0.10 -0.15 -0.20 -0.25 -0.30 -0.35 150 Figure 20. Relative Light Output vs. Junction Temperature. 300 IF T Figure 19. Maximum pulse current vs. ambient temperature. Derated based on TA = 85°C, RJ-A = 30°C/W BLUE GREEN ROYAL BLUE WHITE -25 tp tp T tp - PULSE DURATION - sec Figure 18. Maximum pulse current vs. ambient temperature. Derated based on TA = 25°C, RJ-A = 30°C/W 120.0 110.0 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 -50 D= 140 600 500 400 RTJ-MS = 9°C/W 300 200 100 0 0 20 40 60 80 100 METAL SLUG TEMPERATURE, TMS - °C 120 Figure 23. Maximum Forward Current vs. Metal Slug Temperature. Derated based on TJMAX = 135°C, RJ-MS = 9°C/W 140 0.80 0.85 Solder Pad ø1.90 1.75 3.50 5.20 Slug Indepdent ∅3.2 1.32 Solder Pad Figure 25. Recommended pick and place nozzle tip. Inner diameter = 3.2 mm Figure 24. Recommended soldering land pattern TEMPERATURE 10 - 30 SEC. 217°C 200°C 255 - 260°C 3°C/SEC. MAX. 6°C/SEC. MAX. 150°C 3°C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Figure 26. Recommended Reflow Soldering Profile Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components. 10 Option Selection Details Flux Bin Limit [x4, x5] Color Bin ID Luminous Flux (lm)/ Radiometric Power (mW) at 350 mA Min. Max. Blue M 13.9 18.1 N 18.1 23.5 P 23.5 30.6 Q 30.6 39.8 R 39.8 51.7 S 51.7 67.2 ASMT-J x1 3 x2 – x3 x4 x5 x6 x7 x4 – Minimum Flux Bin Selection x5 – Maximum Flux Bin Selection x6 – Color Bin Selection x7 – Packaging Option Other Colors Deep Red and Royal Blue T 67.2 87.4 U 87.4 99.6 V 99.6 113.6 L 175.0 225.0 M 225.0 275.0 N 275.0 355.0 P 355.0 435.0 Q 435.0 515.0 R 515.0 595.0 Tolerance for each bin limits is ±10% Color Bin Selection (x6) Individual reel will contain parts from one color bin selection only. Cool White Warm White Selection Bin ID Selection Bin ID 0 Full Distribution 0 Full Distribution E VM, UM, VN and UN E NM, MM, N1 and M1 F WM, VM, WN and VN F PM, NM, P1 and N1 G XM, WM, XN and WN G QM, PM, Q1 and P1 H UN, VN, U0 and V0 H M1, N1, M0 and N0 J WN, VN, W0 and V0 J P1, N1, P0 and N0 K XN, WN, X0 and W0 K Q1, P1, Q0 and P0 L V0, U0, VP and UP L N0, M0, NA and MA M W0, V0, WP, VP and WQ M P0, N0, PA and NA N X0, W0, XP, WP and WQ N Q0, P0, QA and PA P Y0 Q YA Neutral White Other Colors Selection Bin ID 0 Full Distribution A and B Selection Bin ID Z 0 Full Distribution Y B and C E SM, RM, S1 and R1 W C and D F TM, SM, TN and S1 V D and E G S1, R1, S0 and R0 Q A, B and C H TN, S1, T0 and S0 P B, C and D J S0, R0, SA and RA N C, D and E K T0, S0, TP and SA M D, E and F 11 0.48 0.42 4500K 0.40 6300K 0.36 WM XM WN W0 XN X0 WP 7000K 0.34 10000K UP VP BLACK BODY CURVE 0.28 0.30 0.32 0.34 X-COORDINATE 0.36 0.38 0.40 0.44 Y-COORDINATE 4100K 4500K TM S1 S0 SA 0.36 TP 3800K RA 3500K RM SM TN T0 0.38 R1 R0 BLACK BODY CURVE 0.34 0.32 0.34 0.36 0.38 0.40 X-COORDINATE Figure 29. Color bin structure for Neutral White 12 0.40 0.38 QA PA N1 P1 P0 NA N0 MA 2700K MM M1 M0 BLACK BODY CURVE 0.32 0.38 0.40 0.42 0.44 0.46 X-COORDINATE Figure 28. Color bin structure for Warm White 0.46 0.40 Q1 Q0 NM PM QM 0.42 3050K 2850K 0.34 Figure 27. Color bin Structure for Cool White 0.42 3500K 3250K 0.36 YA 0.28 0.26 0.26 0.44 UN U0 VM VN V0 XP WQ Y0 0.30 5650K UM Y-COORDINATE Y-COORDINATE 0.38 0.32 0.46 5000K 0.42 0.44 0.48 0.50 Color Bin Limits Warm White Color Limits (Chromaticity Coordinates) 0.347 0.372 Bin MM x y 0.471 0.451 0.460 0.430 0.473 0.432 0.486 0.455 0.346 0.359 0.347 0.372 Bin M1 x y 0.460 0.430 0.453 0.416 0.467 0.419 0.473 0.432 0.360 0.357 0.344 0.344 0.346 0.359 Bin M0 x y 0.453 0.416 0.444 0.399 0.459 0.403 0.467 0.419 0.360 0.357 0.357 0.342 0.343 0.331 0.344 0.344 Bin MA x y 0.459 0.403 0.444 0.399 0.436 0.384 0.451 0.389 x y 0.329 0.357 0.329 0.369 0.348 0.385 0.347 0.372 Bin NM x y 0.454 0.446 0.444 0.426 0.460 0.430 0.471 0.451 Bin VN x y 0.329 0.345 0.329 0.357 0.347 0.372 0.346 0.359 Bin N1 x y 0.444 0.426 0.438 0.412 0.453 0.416 0.460 0.430 Bin V0 x y 0.329 0.331 0.329 0.345 0.346 0.359 0.344 0.344 Bin N0 x y 0.438 0.412 0.429 0.394 0.444 0.399 0.453 0.416 Bin VP x y 0.329 0.331 0.344 0.344 0.343 0.331 0.329 0.320 Bin NA x y 0.444 0.399 0.429 0.394 0.422 0.379 0.436 0.384 Bin WM x y 0.329 0.369 0.329 0.357 0.315 0.344 0.314 0.355 Bin PM x y 0.438 0.440 0.430 0.421 0.444 0.426 0.454 0.446 Bin WN x y 0.329 0.345 0.316 0.333 0.315 0.344 0.329 0.357 Bin P1 x y 0.430 0.421 0.424 0.407 0.438 0.412 0.444 0.426 Bin W0 x y 0.329 0.345 0.329 0.331 0.317 0.320 0.316 0.333 Bin P0 x y 0.424 0.407 0.416 0.389 0.429 0.394 0.438 0.412 Bin WP x y 0.329 0.331 0.329 0.320 0.318 0.310 0.317 0.320 Bin PA x y 0.429 0.394 0.416 0.389 0.410 0.374 0.422 0.379 Bin WQ x y 0.329 0.320 0.329 0.310 0.319 0.300 0.318 0.310 Bin QM x y 0.421 0.433 0.414 0.414 0.430 0.421 0.438 0.440 Bin XM x y 0.301 0.342 0.314 0.355 0.315 0.344 0.303 0.333 Bin Q1 x y 0.414 0.414 0.409 0.400 0.424 0.407 0.430 0.421 Bin XN x y 0.305 0.322 0.303 0.333 0.315 0.344 0.316 0.333 Bin Q0 x y 0.409 0.400 0.402 0.382 0.416 0.389 0.424 0.407 Bin X0 x y 0.308 0.311 0.305 0.322 0.316 0.333 0.317 0.320 Bin QA x y 0.416 0.389 0.402 0.382 0.396 0.367 0.410 0.374 Bin XP x y 0.308 0.311 0.317 0.320 0.319 0.300 0.311 0.293 Bin YO x y 0.308 0.311 0.283 0.284 0.274 0.301 0.303 0.333 Bin YA x y 0.308 0.311 0.311 0.293 0.290 0.270 0.283 0.284 Cool White Color Limits (Chromaticity Coordinates) Bin UM x y 0.365 0.386 0.367 0.400 0.348 0.385 Bin UN x y 0.365 0.386 0.362 0.372 Bin U0 x y 0.362 0.372 Bin UP x y Bin VM Tolerance: ±0.01 13 Tolerance: ±0.01 Neutral White Color Limits (Chromaticity Coordinates) Bin RM x y 0.421 0.433 0.414 0.414 0.397 0.406 0.402 0.423 Bin R1 x y 0.414 0.414 0.409 0.400 0.392 0.391 0.397 0.406 Bin R0 Dominant Wavelength (nm) at 350 mA Color Bin ID Min. Max. Red – 620.0 635.0 Red Orange – 610.0 620.0 Amber B 587.0 589.5 C 589.5 592.0 D 592.0 594.5 E 594.5 597.0 A 455.0 460.0 B 460.0 465.0 C 465.0 470.0 D 470.0 475.0 A 515.0 520.0 x y 0.392 0.391 0.387 0.374 0.402 0.382 0.409 0.400 x y 0.387 0.374 0.383 0.360 0.396 0.367 0.402 0.382 Bin SM x y 0.402 0.423 0.397 0.406 0.382 0.397 0.386 0.413 Bin S1 x y 0.397 0.406 0.392 0.391 0.378 0.382 0.382 0.397 Bin S0 x y 0.392 0.391 0.387 0.374 0.374 0.366 0.378 0.382 x y 0.387 0.374 0.383 0.360 0.370 0.351 0.374 0.366 B 520.0 525.0 C 525.0 530.0 Bin TM x y 0.386 0.413 0.382 0.397 0.365 0.386 0.367 0.400 D 530.0 535.0 Bin TN x y 0.382 0.397 0.378 0.382 0.362 0.372 0.365 0.386 Bin T0 x y 0.378 0.382 0.374 0.366 0.360 0.357 0.362 0.372 Bin TP x y 0.374 0.366 0.370 0.351 0.357 0.342 0.360 0.357 Bin RA Bin SA Tolerance: ±0.01 Blue Green Tolerance: ±1 nm Peak Wavelength (nm) at 350 mA Color Bin ID Min. Max. Deep Red - 650.0 670.0 Royal Blue C 440.0 445.0 D 445.0 450.0 E 450.0 455.0 F 455.0 460.0 Tolerance: ±2 nm Packaging Option [x7] Example Selection Option ASMT-JG31-NST01 1 Tape and Reel ASMT-JG31-Nxxxx – Green, InGaN, Electrically isolated Heat Sink X4 = S – Minimum Flux Bin S X5 = T – Maximum Flux Bin T – Full Distribution X6 = 0 X7 = 1 – Tape and Reel Option 14 Tape and Reel – Option 1 4.00 ±.10 ø1.5 ±0.1 2.00 ±.05 0.25 ±0.02 8.00 ±.10 ø1.5 ±0.25 8° 2.01 ±0.1 0.25 ±0.02 2.05 ±.10 4.15 ±.10 5.25 ±.10 12.00 +.30 .10 5.50 ±.05 5° 1.75 ±0.01 Figure 30. Carrier Tape Dimensions 13.2 ±.5 16.0 ±.5 3 ±0.5 ø21.0 ±0.5 ø13.1 ±0.5 ø10 178 ±1 ø60 ±0.5 4 ±0.5 5 ±0.5 Notes: 1. Empty component pockets sealed with top cover tape. 2. 250 or 500 pieces per reel. 3. Drawing not to scale. 4. All dimensions are in millimeters. Figure 31. Reel dimensions 15 USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 32. Reeling Orientation DISCLAIMER: Avago’s products and software are not specifically designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. AV02-1941EN - May 16, 2012