Omron D2FW-G083M Single-point mounting with an m4 screw Datasheet

D2FW-G
M4 Mounting Sealed Basic Switch
Easy to mount with one
single screw. A sealed switch
ideal for use in adverse
environment conditions
D
2
F
W
G
-
● Single-point mounting with an M4 screw.
● Incorporates a fixed leaf lever for tough
environments.
● Molded lead wires are installed using lead-free
connections for environmental conservation.
RoHS Compliant
Model Number Legend
1 @
2 @
3 M
D2FW-G @
1. Ratings
2 : 30 VDC 1A
0 : 30 VDC 0.1A
3. Contact form
1 : SPDT
2 : SPST-NC
3 : SPST-NO
2. Levers
7 : Leaf lever
8 : Long leaf lever
List of Models
Ratings
Actuator
Contact form
Leaf lever
Long leaf lever
1A
SPDT
D2FW-G271M
D2FW-G071M
SPST-NC
D2FW-G272M
D2FW-G072M
SPST-NO
D2FW-G273M
D2FW-G073M
SPDT
D2FW-G281M
D2FW-G081M
SPST-NC
D2FW-G282M
D2FW-G082M
SPST-NO
D2FW-G283M
D2FW-G083M
Contact form
●SPDT
0.1 A
Contact Specifications
●SPST-NC
●SPST-NO
Item
Model
D2FW-G2 models
Specification
Contact
Crossbar
Material
Silver alloy
Gap (standard value)
COM
(Black)
NO NC
(Blue)(Red)
COM
(Black)
NC
(Red)
COM
NO
(Black) (Blue)
The color in parentheses
indicates the color of the
lead wire.
Minimum applicable load
(reference value) *
*
D2FW-G0 models
Gold alloy
0.25 mm
5 VDC 100 mA
5 VDC 1 mA
Please refer to "●Using Micro Loads" in "Precautions" for more
information on the minimum applicable load.
Ratings
Model
D2FW-G2 models
Rated voltage
30 VDC
D2FW-G0 models
Resistive load
1A
0.1 A
Note. The above rating values apply under the following test conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%
(3) Operating frequency: 20 operations/min
1
D2FW-G
M4 Mounting Sealed Basic Switch
Characteristics
Mounting Holes (Unit: mm)
Item
Model
D2FW-G2 models
Permissible operating speed
Permissible
operating frequency
Mechanical
120 operations/min
Electrical
30 operations/min
Insulation resistance
Dielectric strength
-
Vibration resistance
*1
Shock resistance
100 mΩ max.
16
4+0.1
0 dia. holes
(depth: 2mm min.)
150 mΩ max.
Between terminals of the same
polarity
600 VAC 50/60 Hz for 1 min
Between current-carrying metal
parts and ground
1,500 VAC 50/60 Hz for 1 min
Between each terminal and
non-current-carrying metal parts
1,500 VAC 50/60 Hz for 1 min
Malfunction
10 to 55 Hz, 1.5 mm double amplitude
Durability
1,000 m/s2 {approx. 100G} max.
Malfunction * 1
300 m/s2 {approx. 30G} max.
Mechanical
Durability * 2
M4 Tap
100 MΩ min. (at 500 VDC with insulation tester)
Contact resistance (initial value)
D
2
F
W
G
D2FW-G0 models
1mm to 500mm/s
300,000 operations min. (60 operations/min)
30,000 operations min.
(20 operations/min)
Electrical
Degree of protection
100,000 operations min.
(20 operations/min)
IEC IP67
-40°C to +85°C (at ambient humidity 60% max.)
(with no icing or condensation)
Ambient operating temperature
95% max. (for +5°C to +35°C)
Ambient operating humidity
Weight
Approx. 10.4 g (for SPDT model)
Note. The data given above are initial values.
*1. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel
Position value for lever. Close or open circuit of the contact is 1ms max.
*2. For testing conditions, consult your OMRON sales representative.
Dimensions (Unit: mm) /Operating Characteristics
The @ is replaced with the code for the ratings and the contact forms. See the "List of Models" for available combinations of shapes.
●Leaf lever
D2FW-G#7#M
2
㸦22.8㸧
16±0.15
t0.2 Stainless-steel lever
A
4.2+0.2
0 dia.
2
5
D2FW-G#7#M
OF
RF
Max.
Min.
2.45N {250 gf}
0.29N {30 gf}
Overtravel
OT
Movement Differential MD
Min.
Max.
1.0 mm
1.0 mm
Operating Force
Releasing Force
D2FW㸫G
13.5
Free Position
Operating Position
Total Travel Position
R3.5
Leaf lever
Type
Model
Operating Characteristics
Free
Position
Operating
Position
0
dia.
4 0.15
4+0.2
0 dia.
8
5
FP Max.
OP
TTP
15.5 mm
11.5±2 mm
6.5 mm (reference value)
300±10
Lead wire
COM AVS0.5 (Black)
NO AVS0.5 (Blue)
NC AVS0.5 (Red)
●Long leaf lever
D2FW-G#8#M
㸦5㸧
4.7
15.3
23.5
㸦19㸧
16±0.15
t0.2 Stainless-steel lever
2
A
4.2+0.2
0 dia.
0
4 0.15
dia.
5
4+0.2
0 dia.
Free
Position
Operating
Position
D2FW㸫G
13.5
R3.5
300±10
Lead wire
COM AVS0.5 (Black)
NO AVS0.5 (Blue)
NC AVS0.5 (Red)
㸦5㸧
4.7
15.3
23.5
Note1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note2. The operating characteristics are for operation in the A direction ( ).
2
8
5
2
Long leaf lever
Type
Model
D2FW-G#8#M
OF
RF
Max.
Min.
2.94N {300 gf}
0.59N {60 gf}
Overtravel
OT
Movement Differential MD
Min.
Max.
1.0 mm
1.0 mm
Operating
Characteristics
Operating Force
Releasing Force
Free Position
Operating Position
Total Travel Position
FP Max.
OP
TTP
19 mm
12±2 mm
8.5 mm (reference value)
D2FW-G
M4 Mounting Sealed Basic Switch
Precautions
★Please refer to "Basic Switches Common Precautions" for correct use.
Cautions
●Degree of Protection
●Protection Against Chemicals
Prevent the Switch from coming into contact with oil or
chemicals.
Otherwise, damage to or deterioration of Switch materials may
result.
• Turn OFF the power supply before mounting or removing the
Switch, wiring, or performing maintenance or inspection.
Failure to do so may result in electric shock or burning.
• Use M4 mounting screws with plane washers or spring
washers to securely mount the Switch. Tighten the screws to a
torque of 1.18 to 1.47N·m {12 to 15 kgf·cm}.
●Switch Mounting
When mounting the Switch, do not apply force to the actuator in
any direction other than its operating direction.
●Operation
Make sure that the switching object is perfectly separated from
the actuator when it is at the free position and the actuator is
pressed appropriately by the switching object when the switch is
operated.
The switching object must not move beyond its total travel
position, otherwise the Switch may be damaged.
Install the switching object so that its moving direction is the
same as that of the actuator.
●Using Micro Loads
• Even when using micro load models within the operating
range shown below, if inrush/surge current occurs, it may
increase the contact wear and so decrease durability.
Therefore, insert a contact protection circuit where necessary.
• The minimum applicable load is the N-level reference value.
This value indicates the malfunction reference level for the
reliability level of 60% (λ60).
(JIS C5003)
The equation, λ60=0.5×10-6/operations, indicates that the
1
estimated malfunction rate is less than 2,000,000 operations
with a reliability level of 60%.
30
0.16 mA
16.6 mA 100 mA
24
Operating range
for micro load
models
D2FW-G0#
Operating
range for
general-load
models
D2FW-G2#
12
5
1mA
0
0.1
D
2
F
W
G
-
Do not use the Switch underwater.
The Switch was tested and found to meet the conditions
necessary to meet the following standards. The test checks for
water intrusion after immersion for a specified time period, not for
switching operation underwater.
JIS C0920:
Degrees of protection provided by enclosures of electrical
apparatus (IP Code)
IEC 60529:
Degrees of protection provided by enclosures (IP Code)
Degree of protection: IP67
(check water intrusion after immersion
for 30 min. submerged 1m underwater)
●Mounting
Voltage (V)
Use the Switch within the specified Voltage rating. Using the
Switch outside of the rated values will not only shorten its
durability but may cause heat generation or fire damage. When
turning the power ON or OFF, use the rated voltage and current.
Correct Use
1
10
100
1,000
Current (mA)
3
D2FW-G
M4 Mounting Sealed Basic Switch
-
D
2
F
W
G
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
4
Contact: www.omron.com/ecb
Cat. No. B104-E1-03
0812(0207)(O)
Similar pages