API_newlayouts_single:APIcatalog_newlayouts 8/27/10 11:13 AM Page 132 a Tr er s SERIES CM7560 FERRITE CORE 56 0.013 5.5 68 0.013 5.5 82 0.013 5.5 100 0.013 5.5 120 0.015 5.5 150 0.015 5.5 180 0.019 4.5 220 0.020 4.5 270 0.025 4.5 330 0.025 3.5 470 0.030 3.5 560 0.035 3.5 680 0.040 3.5 820 0.060 2.8 1000 0.065 2.8 1200 0.095 2.2 1500 0.115 1.7 1800 0.125 1.7 2200 0.170 1.4 2700 0.180 1.4 3300 0.320 1.1 3900 0.400 1.1 4700 0.450 0.88 5600 0.500 0.88 6800 0.600 0.88 8200 0.750 0.88 10000 0.800 0.70 12000 0.900 0.70 15000 1.00 0.70 18000 1.30 0.55 22000 1.50 0.55 27000 1.80 0.44 33000 2.20 0.44 39000 2.60 0.44 47000 3.00 0.44 56000 4.00 0.35 68000 5.00 0.27 82000 5.50 0.27 100000 6.40 0.27 120000 7.80 0.22 150000 9.00 0.22 m or -563 -683 -823 -104 -124 -154 -184 -224 -274 -334 -474 -564 -684 -824 -105 -125 -155 -185 -225 -275 -335 -395 -475 -565 -685 -825 -106 -126 -156 -186 -226 -276 -336 -396 -476 -566 -686 -826 -107 -127 -157 f ns CE AN ) CT (µH DU IN UM E IM AG AX AK M LE NG TI ) RA S T MP EN (A RR UM CU XIM MA CE AN ) ST S SI HM RE M (O DC MU XI MA 2 rL 1o % , L 25 H) ± (µ z L 1 kH @ * Millimeters 21.8 ± 0.64 27.2 ± 1.27 21.1 ± 0.76 26.9 (Ref. only) 1.0 ± 0.64 0.64 Sq. (Typ.) 10.2 ± 0.3 4.4 ± 0.38 26.2 (Ref. only) 10.2 ± 0.3 16.0 ± 0.3 ER Physical Parameters Inches A 0.860 ± 0.025 B 1.070 ± 0.050 C 0.830 ± 0.030 D 1.060 (Ref. only) E 0.040 ± 0.025 F 0.025 Sq. (Typ.) G 0.400 ± 0.010 H 0.175 ± 0.015 J 1.03 (Ref. only) K 0.400 ± 0.010 L 0.630 + 0.010 MB Actual Size NU PC Mount Common Mode Choke SH CM7560R CM7560 DA SERIES 3.5 3.5 3.5 3.5 4.5 6.0 7.0 7.5 9.0 12 14 18 20 24 30 35 40 45 55 75 90 100 130 175 220 230 250 300 350 425 475 550 650 800 900 1100 1300 1800 2100 2600 3000 *Complete part # must include series # PLUS the dash # For surface finish information, refer to www.delevanfinishes.com Marking DELEVAN; part number. Operating Temperature Range –55°C to +125°C Example: CM7560-563 DELEVAN CM7560-563 Current Rating at 85°C Ambient 40°C Rise Packaging Bulk only Mechanical Configuration Tape wrapped winding sections; varnish impregnated assembly Notes 1) Inductance in table is for either Ll or L2. 2) Leakage Inductance tested at Ll with L2 shorted or at L2 with Ll shorted. 3) Windings balanced within 1%. 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 1/2009