ETC2 A070FW03 7color tft-lcd module Datasheet

Version
Total pages
Date
1
20
2003.04.07
Product Specification
7〞 color TFT-LCD module
MODEL NAME: A070FW03
( ◆ ) Preliminary Specification
( … .. ) Final Specification
Note:
The
content
of
this
specification
is
subject
to
change.
© 2002 AU Optronics
All Rights Reserved,
Do Not Copy.
Record of Revision
Version
0
Revise Date P a g e
07/Apr./2003
0
Content
First draft.
Version
Page
:
1
: 1 /20
Contents:
A. Physical specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3
B. Electrical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P4
1. Pin assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P4
a.TFT-LCD panel driving section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P4
b.Backlight driving section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P5
2.Absolute maximum ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P5
3. Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P6
a. Typical operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P6
b. Current consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P6
c. Backlight driving conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P6
4. AC Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P7
a. Timing conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P7
b. Timing diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P7
C. Optical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P8
D. Reliability test items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P10
E. Packing form. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P11
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 2 /20
Appendix:
Fig.1 Outline dimension of TFT-LCD module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P12
Fig.2 Sampling clock timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P14
Fig.3 Horizontal display timing range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P15
Fig.4-(a) Horizontal timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P16
Fig.4- (b) Detail horizontal timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P17
Fig.5 Vertical shift clock timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P18
Fig.6- (a) Vertical timing (From up to down). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P19
Fig.6-(b) Vertical timing (From down to up) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P20
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 3 /20
A. Physical specifications
NO.
Item
Specification
1
Display resolution(dot)
1440(W)×234(H)
2
Active area(mm)
154.08(W)×86.58(H)
3
Screen size(inch)
7.0(Diagonal)
4
Dot pitch(mm)
0.107(W)×0.370(H)
5
Color configuration
R. G. B. stripe
6
Overall dimension(mm)
164.9(W)×100.0(H)×5.7(D)
7
Weight(g)
162 ±10
8
Surface treatment
AG(5.5%) with WV film
9
Backlight unit
CCFL
Remark
Note 1
Note 1: Refer to Fig. 1
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 4 /20
B. Electrical specifications
1.Pin assignment
a. TFT-LCD panel driving section
Pin no
Symbol
I/O
Description
Remark
1
GND
-
Ground for logic circuit
2
VCC
I
Supply voltage of logic control circuit for scan driver
3
VGL
I
Negative power for scan driver
4
VGH
I
Positive power for scan driver
5
STVR
I/O Vertical start pulse
Note 1
6
STVL
I/O Vertical start pulse
Note 1
7
CKV
I
Shift clock input for scan driver
8
U/D
I
UP/DOWN scan control input
9
OEV
I
Output enable input for scan driver
10
VCOM
I
Common electrode driving signal
11
VCOM
I
Common electrode driving signal
12
L/R
I
LEFT/RIGHT scan control input
13
MOD
I
Sequential sampling and simultaneous sampling setting
14
OEH
I
Output enable input for data driver
15
STHL
I/O Start pulse for horizontal scan line
Note 1
16
STHR
I/O Start pulse for horizontal scan line
Note 1
17
CPH3
I
Sampling and shifting clock pulse for data driver
18
CPH2
I
Sampling and shifting clock pulse for data driver
19
CPH1
I
Sampling and shifting clock pulse for data driver
20
VCC
I
Supply voltage of logic control circuit for data driver
21
GND
-
Ground for logic circuit
22
VR
I
Alternated video signal input(Red)
23
VG
I
Alternated video signal input(Green)
24
VB
I
Alternated video signal input(Blue)
25
AVDD
I
Supply voltage for analog circuit
26
AVSS
-
Ground for analog circuit
Note 1,2
Note 1,2
Note 3
Note 1: Selection of scanning mode (please refer to the following table)
Setting of scan
control input
U/D
GND
L/R
VCC
IN/OUT state
for start pulse
Scanning direction
STVR
OUT
STVL
IN
STHR
OUT
STHL
IN
From up to down, and from left to right.
VCC
GND
IN
OUT
IN
OUT
From down to up, and from right to left.
GND
GND
OUT
IN
IN
OUT
From up to down, and from right to left.
VCC
VCC
IN
OUT
OUT
IN
From down to up, and from left to right.
IN: Input; OUT: Output.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 5 /20
Note 2: Definition of scanning direction.
Refer to figure as below:
Note 3: MOD = H: Simultaneous sampling.
MOD = L: Sequential sampling.
Please set CPH2 and CPH3 to GND when MOD = H.
b. Backlight driving section (Refer to Figure 1)
No.
Symbol
I/O
Description
Remark
1
HI
I
Power supply for backlight unit (High voltage)
--
2
GND
-
Ground for backlight unit
--
2. Absolute maximum ratings
Item
Power voltage
Symbol
Condition
Min.
Max.
Unit
VCC
GND=0
-0.3
7
V
AVDD
AVSS=0
-0.3
7
V
-0.3
18
V
-15
0.3
V
VGH －VGL
-
33
V
Vi
-0.3
AVDD +0.3
V
Note 1
VI
-0.3
VCC +0.3
V
Note 2
VCOM
-2.9
5.2
V
VGH
VGL
Input signal voltage
GND=0
Remark
Note 1: VR, VG, VB.
Note 2: STHL, STHR, OEH, L/R, CPH1~CPH3, STVR, STVL, OEV, CKV, U/D.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 6 /20
3. Electrical characteristics
a. Typical operating conditions (GND=AVss=0V, Note 4 )
Item
Symbol
Min.
Typ.
Max.
Unit
VCC
3
5
5.2
V
AVDD
4.8
5
5.2
V
VGH
14.3
15
15.7
V
VGL
-10.5
-10
-9.5
V
ViA
0.4
-
AVDD -0.4
V
Note 1
ViAC
-
3
-
V
AC component
ViDC
-
AVDD /2
-
DC component
VCAC
3.5
5.6
6.5
V
Vp-p
AC component, Note 2
VCDC
1.4
1.7
2.0
V
DC component
H Level
VIH
0.8 VCC
-
VCC
V
L Level
VIL
0
-
0.2 VCC
V
Power supply
Video signal
amplitude
(VR,VG,VB)
VCOM
Input
signal
voltage
Remark
Note 3
Note 1: Refer to Fig.4- (a).
Note 2: The brightness of LCD panel could be changed by adjusting the AC component of
VCOM.
Note 3: STHL, STHR, OEH, L/R, CPH1~CPH3, STVR, STVL, OEV, CKV, U/D.
Note 4: Be sure to apply GND, VCC and VGL to the LCD first, and then apply VGH .
b. Current consumption (GND=AVss=0V)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Current
for
driver
IGH
VGH =15V
-
0.20
0.5
mA
IGL
VGL=-10V
-
0.80
1.5
mA
ICC
VCC =5V
-
3.0
6.0
mA
IDD
AVDD =5V
-
17.0
30
mA
Remark
c. Backlight driving conditions
Parameter
Symbol
Lamp voltage
Lamp current
Frequency
Lamp starting voltage
Lamp life time
VL
Min.
-
Typ.
560
Max.
620
Vrms
IL
-
6
7
mArms
FL
-
60
80
kHz
Note 4
-
-
900
Vrms
Note 1,5
-
-
-
Vrms
Note 2,5
-
-
1,100
Vrms
Note 3,5
10,000
-
-
Hr
Note 6
VS
Unit
Remark
Note
Note
Note
Note
1: Ta = 25℃ .
2: Ta = 0℃ .
3: Ta = -30℃ .
4: The lamp frequency should be selected as different as possible from display
horizontal synchronous signal to avoid interference.
Note 5: For starting the backlight unit, the output voltage of DC/AC’s transformer should be larger
than the maximum lamp starting voltage.
Note 6: The” Lamp life time” is defined as the module brightness decrease to 50% original
brightness at Ta=25℃ , IL =6mA.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 7 /20
5. AC Timing
a. Timing conditions
Parameter
Symbol
Min.
Typ.
Max.
Unit.
Remark
Rising time
tr
-
-
10
ns
Note 1
Falling time
High and low level pulse width
tf
-
-
10
ns
Note 1
tCPH
99
103
107
ns
CPH1~CPH3
tCWH
tC12
tC23
tC31
40
50
60
%
CPH1~CPH3
30
tCPH /3
tCPH /2
ns
CPH1~CPH3
STH setup time
tSUH
20
-
-
ns
STHR,STHL
STH hold time
tHDH
20
-
-
Ns
STHR,STHL
STH pulse width
tSTH
-
1
-
tCPH
STHR,STHL
tH
61.5
63.5
65.5
μs
STHR,STHL
OEH pulse width
tOEH
-
1.22
-
μs
OEH
Sample and hold disable time
tDIS1
-
8.28
-
μs
OEV pulse width
tOEV
-
5.40
-
μs
OEV
CKV pulse width
tCKV
-
4.18
-
μs
CKV
Clean enable time
tDIS2
tSH
-
3.74
-
μs
-
0
-
TCPH /3
Horizontal display
timing range
tDH
-
1440
-
TCPH /3
STV setup time
tSUV
400
-
-
ns
STVL,STVR
STV hold time
tHDV
400
-
-
ns
STVL,STVR
STV pulse width
tSTV
-
-
1
tH
STVL,STVR
Horizontal lines per field
tV
256
262
268
tH
Note 2
Vertical display start
tSV
3
-
tH
Vertical display timing range
tDV
234
-
tH
VCOM rising time
trCOM
-
5
μs
VCOM falling time
tf COM
-
5
μs
VCOM delay time
tDCOM
-
3
μs
RGB delay time
tDRGB
-
1
μs
CPH pulse duty
CPH pulse delay
STH period
Horizontal display start
Note 1: For all of the logic signals.
Note 2: Please don’t use odd horizontal lines to drive LCD panel for both odd and even field
simultaneously.
b. Timing diagram
Please refer to the attached drawing, from Fig.2 to Fig.6.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 8 /20
5. Power Sequence
Sequence for power on/off and Signal on/off
Power on
Power off
VGH
VGH
VCC
GND
GND
VGL
T1
VGL
T5
T1 T2
T3
OFF
VCC
VCC
T4
T5
T6
T7
Video Signal, Logic Signal
ON
OFF
T1 ≦ 15ms (From 10%*VCC to 90%*VCC，when VCC is Low to High)；
T2 ≦ 10ms (From 90%*VCC to 10%*VGH，when VCC is Low to High)；
T3 ≦ 10ms (From 90%*VGH to Video signal，when VGH is Low to High)；
T4 ≦ 10ms (From Video signal to 90%*VGH，when VGH is High to Low)；
T5 ≦ 20ms (From 90%*VCC to 10%*VCC，when VCC is High to Low)；
T6 ≦ 10ms (From 10%*VGH to 90%*VCC，when VCC is Low to High)；
T7 ≧ 0.4s (From 10%*VCC is H→L to 10%*VCC is L→H)。
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 9 /20
C. Optical specification (Note 1, Note 2)
Item
Symbol
Response time
Rise
Fall
Contrast ratio
Condition
Min.
Typ.
Max.
Unit
Remark
-
12
18
24
36
ms
ms
Note 3,5
200
300
-
Note 4, 5
30
50
50
50
40
-
Note 5, 6
60
-
60
60
-
30
60
60
60
50
-
70
-
70
70
-
IL=6mA, 25℃
400
500
-
IL=6mA, -10℃,
after turn-on 1min
TBD
TBD
θ=0°
Tr
Tf
At optimized
CR
Viewing angle
Viewing angle
Viewing angle
Top
Bottom
Left
Right
CR≧10
Top
Bottom
Left
Right
Brightness
White chromaticity
CR≧5
YL
X
θ=0°
0.26
0.31
0.36
Y
θ=0°
0.28
0.33
0.38
deg.
Note 5, 6
deg.
cd/m
2
cd/m
2
Note 7
Note 7
Note 1 : Ambient temperature =25℃, and lamp current IL = 6 mArms. To be measured in the dark
room.
Note 2 :To be measured on the center area of panel with a viewing cone of 1°
by Topcon
luminance meter BM-5, after 10 minutes operation.
Note 3. Definition of response time:
The output signals of photo detector are measured when the input signals are changed
from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of
amplitudes. Refer to figure as below.
"Black"
"White"
"White"
Signal(Relative value)
100%
90%
10%
0%
Tr
Tf
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 10 /20
Note 4. Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Contrast ratio (CR)=
Photo detector output when LCD is at “White” state
Photo detector output when LCD is at “Black” state
Note 5. White Vi=Vi50 ＋ 1.5V
Black Vi=Vi50 ±2.0V
“±” means that the analog input signal swings in phase with VCOM signal.
“ ” means that the analog input signal swings out of phase with VCOM signal.
Vi50
:
The analog input voltage when transmission is 50%
The 100% transmission is defined as the transmission of LCD panel when all the input
terminals of module are electrically opened.
Note 6. Definition of viewing angle, Refer to figure as below.
Note 7. Measured at the center area of the panel when all the input terminals of LCD panel are
electrically opened.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 11 /20
D. Reliability test items(Note 2):
No.
Test items
Conditions
1
High temperature storage
Ta= 95℃
240Hrs
2
Low temperature storage
Ta= -40℃
240Hrs
3
High temperature operation
Ta= 85℃
240Hrs
4
Low temperature operation
Ta= -30℃
240Hrs
5
High temperature and high humidity
Ta= 60℃, 90% RH
240Hrs
6
Heat shock
-30℃~85℃/200 cycles 1Hrs/cycle
7
Electrostatic discharge
8
Vibration
±200V,200pF(0Ω), once for each terminal
Remark
Operation
Non-operation
Non-operation
Frequency range
: 8~33.3Hz
Stoke
: 1.3mm
Sweep
: 2.9G, 33.3 ~ 400Hz A-10
Condition A
: 15 minutes
Cycle
JIS C7021,
2 hours for each direction of X,Z
4 hours for Y direction
100G, 6ms, ±X,±Y,±Z
9
Mechanical shock
3 times for each direction
JIS C7021,
A-7
Condition C
Random vibration:
10
Vibration (with carton)
2
0.015G /Hz from 5~200Hz
IEC 68-34
–6dB/octave from 200~500Hz
11
Drop (with carton)
Height: 60cm
1 corner, 3 edges, 6 surfaces
JIS Z0202
Note1: Ta: Ambient temperature.
Note 2: In the standard conditions, there is not display function NG issue occurred. All the
cosmetic specification is judged before the reliability stress.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Version
Page
:
1
: 12 /20
E. Packing form
TBD
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
:
1
: 13 /20
Fig.1-(a) Outline dimension of TFT-LCD module(Front side)
Version
Page
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
:
1
: 14 /20
t C12
t STH
90% 90%
CPH3
CPH2
10%
tr
50%
50%
CPH1
STHL(R)
t CWH
t CPH
tf
10%
t SUH
t HDH
t C23
t C31
Fig.2 Sampling clock timing
Version
Page
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
CPH1
Output(STHR/STHL)
Input(STHL/STHR)
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Fig.3 Horizontal display timing range
:
1
: 15 /20
t DH
Version
Page
Fig.4-(a) Horizontal timing
:
1
: 16 /20
V iAC
Blank
ViDC
V R(GB)
VCOM
CKV
OEV
STHL(R)
OEH
(HSY)
V
CDC
Black
1H
ViA
t
H
White
Blank
Black
V
CAC
White
Version
Page
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
t DIS2
t OEV
10%
t DRGB
t rCOM
90%
50%
t DCOM
t CKV
t OEH
t DIS1
t STH
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
90%
Fig.4-(b) Detail horizontal timing
Note: The falling edge of OEV should be synchronized with the falling edge of OEH
V R(GB)
VCOM
CKV
OEV
STHL(R)
OEH
(HSY)
1H
t fCOM
10%
Version
Page
:
1
: 17 /20
t CKV
t HDV
t SUV
CKV
STVL(R)
50%
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Fig.5 Vertical shift clock timing
:
1
: 18 /20
50%
Version
Page
:
1
: 19 /20
VCOM(Even field)
VCOM(Odd field)
STVL
(VSY)
(HSY)
VR(GB)
Display on panel first line
t SV
Fig.6-(a) Vertical timing (From up to down)
Version
Page
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
:
1
: 20 /20
VCOM(Even field)
VCOM(Odd field)
STVL
(VSY)
(HSY)
V R(GB)
Display on panel first line
t SV
Fig.6-(b) Horizontal timing (From down to up)
Version
Page
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.