CBT-BGA DIRECT MOUNT, SOLDERLESS SOCKET FOR BURN-IN AND TEST APPLICATIONS Features • Wide temperature range (-55C to +180C). • High current capability (up to 8A). • Excellent signal integrity at high frequencies. • Low and stable contact resistance for reliable production yield. • Highly compliant to accommodate wide co-planarity variations. • Automated probe manufacturing enables low cost and short lead time. 43.8100 50.3975 5.8100 32.6000 39.2250 Description: CBT Socket, 13mm x 13mm Primary dimension units are millimeters, Secondary dimension units are [inches]. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. CBT-BGA-6014 Specification Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 73.53 STATUS: Released SHEET: 1 OF 4 DRAWN BY: M. Raske SCALE: 1:1 FILE: CBT-BGA-6014 Dwg DATE: 8/1/2012 REV. A *Note: BGA pattern is not symmetrical with respect to the mounting holes. 18.4250 BACKING PLATE 1.00 TYP 1.70±0.05 NON-PLATED HOLE 9.1125 0.85 (x2) NON-PLATED HOLE 7.8625±0.0250 5.50 19.725 BACKING PLATE 5.3225±0.0250 0 0.51 (x144) PAD 2.7825±0.0250 5.50 7.8625±0.0250 9.1125 7.8625±0.0250 5.875 0 5.125 7.8625±0.0250 9.1125 9.1125 Target PCB Recommendations Total thickness: 1.5mm min. Plating: Gold or Solder finish Description: Recommended PCB layout Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. CBT-BGA-6014 Specification Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 73.53 STATUS: Released SHEET: 2 OF 4 DRAWN BY: M. Raske SCALE: 5:1 FILE: CBT-BGA-6014 Dwg DATE: 8/1/2012 REV. A Ironwood Package Code: BGA144C2 D A 0.20 C SEE NOTE 5 0.20 C B A A1 0.20 C E DETAIL E SCALE 8 : 1 b 0.25 C A B 0.10 e DIM MIN MAX A 2.9 3.5 A1 0.4 0.6 b 0.5 0.7 1. Dimensions are in millimeters. 2. Interpret dimensions and tolerances per ASME Y14.5M-1994. D 12.95 13.05 3. Dimension b is measured at the maximum solder ball diameter, parallel to datum plane Z. E 12.95 13.05 4. Datum Z (seating plane) is defined by the spherical crowns of the solder balls. e 1.0 5. Parallelism measurement shall exclude any effect of mark on top surface of package. Description: BGA Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. CBT-BGA-6014 Specification Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 73.53 STATUS: Released SHEET: 3 OF 4 DRAWN BY: M. Raske SCALE: 5:1 FILE: CBT-BGA-6014 Dwg DATE: 8/1/2012 REV. A 9 ITEM NO. 1 2 3 Material 7075-T6 Aluminum Alloy Material <not specified> FR4 4 DESCRIPTION CBT Socket Base 13mm BGA chip 13mm 1mm SBT-BGA-6034 PCB CBT-BGA, bottom guide, 13mm IC, 12x12 array 5 CBT-BGA, middle guide, 13mm IC, 12x12 array PEEK Ceramic filled 6 CBT-BGA, floating guide, 13mm IC, 12x12 array PEEK Ceramic filled 7 Latch 10-17mm clamshell 7075-T6 Aluminum Alloy 8 Socket Lid clamshell double latch 17mm 7075-T6 Aluminum Alloy 9 CBT Ni plt COMP SCREW 17MM IC M10 7075-T6 Aluminum Alloy 10 CBT-BGA13mm dbl latch compression plate 7075-T6 (SN) 11 13x13mm Clamshell Backing Plate 7075-T6 Aluminum Alloy 12 Screw, #0-80 X .188", Flat, SS Stainless Steel (18-8) 13 Floating Guide Spring Alloy Steel (SS) 14 Hinge Pin and Snap Ring, 3mm OD, 25mm long, SS Stainless Steel (ferritic) 19 15 Precision Compression Spring, Zinc-Plated Music Wire, 1/2" Length, .12" OD, .016" Wire Zinc Plated Music Wire 6 16 #0-80 x 0.5, SH Cap Screw Material <not specified> 17 Screw, M3 x 12mm, Low Head Cap, SS 18-8 Stainless Steel 18 19 20 21 Spring Clamshell lid assembly Dowel Pin, 1/32" x 3/8", SS Pogo Pin, 1mm Pitch SBT BGA pin Custom IC frame C10137 Steel Music Wire Chrome Stainless Steel 8 17 18 15 7 14 10 21 2 1 13 20 5 4 12 3 PEEK Ceramic filled Ultem 1000 11 16 Description: Skt, Insulation Plate, Pin Det PIN DETAIL Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. CBT-BGA-6014 Specification Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 73.53 STATUS: Released SHEET: 4 OF 4 DRAWN BY: M. Raske SCALE: 2:1 FILE: CBT-BGA-6014 Dwg DATE: 8/1/2012 REV. A