ES1A thru ES1D Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Ultrafast recovery times for high efficiency • Low forward voltage, low power losses • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s DO-214AC (SMA) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 200 V IFSM 30 A trr 15 ns VF 0.92 V TJ max. 150 °C MECHANICAL DATA Case: DO-214AC (SMA) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC-Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code ES1A ES1B ES1C ES1D UNIT EA EB EC ED Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V Maximum RMS voltage VRMS 35 70 105 140 V Maximum DC blocking voltage VDC 50 100 150 200 V Maximum average forward rectified current (Fig. 1) IF(AV) 1 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range www.vishay.com 650 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88586 Revision: 27-Aug-08 ES1A thru ES1D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage SYMBOL VALUE UNIT VF 0.865 0.920 V IR 5.0 100 µA IF = 0.6 A (1) IF = 1.0 A Maximum DC reverse current at rated DC blocking voltage TA = 25 °C TA = 100 °C Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, lrr = 0.25 A trr 15 ns Maximum reverse recovery time IF = 0.6 A, VR = 30 V, dI/dt = 50 A/µs, Irr =10 % IRM TJ = 25 °C TJ = 100 °C trr 25 35 ns Maximum stored charge IF = 0.6 A, VR = 30 V, dI/dt = 50 A/µs, Irr =10 % IRM TJ = 25 °C TJ = 100 °C Qrr 10 25 nC Typical junction capacitance 4.0 V, 1 MHz CJ 10 pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL ES1A ES1B RθJA RθJL Typical thermal resistance (1) ES1C ES1D UNIT 85 35 °C/W Note: (1) Units mounted on P.C.B. 5.0 x 5.0 mm (0.013 mm thick) land areas ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE ES1D-E3/61T 0.064 61T 1800 7" diameter plastic tape and reel ES1D-E3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel ES1DHE3/61T (1) 0.064 61T 1800 7" diameter plastic tape and reel (1) 0.064 5AT 7500 13" diameter plastic tape and reel ES1DHE3/5AT BASE QUANTITY DELIVERY MODE Note: (1) Automotive grade AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.2 1.0 0.8 0.6 0.4 Resistive or Inductive Load P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0.2 0 8.3 ms Single Half Sine-Wave 25 20 15 10 5 0 80 90 100 110 120 130 140 150 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Document Number: 88586 Revision: 27-Aug-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 651 ES1A thru ES1D Vishay General Semiconductor 14 TJ = 150 °C 10 TJ = 125 °C 1 TJ = 100 °C 0.1 TJ = 25 °C 0.01 0.2 10 8 6 4 2 0 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 1000 100 100 Transient Thermal Impedance (°C/W) Instantaneous Reverse Leakage Current (µA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 12 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 150 °C TJ = 125 °C 100 TJ = 100 °C 10 1 TJ = 25 °C 20 40 60 80 10 1 0.1 0.1 0 Mounted on 0.2 x 0.2" (5 x 7 mm) Copper Pad Areas 100 1 10 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Thermal Impedance 100 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.110 (2.79) 0.100 (2.54) 0.065 (1.65) 0.049 (1.25) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.074 (1.88) MAX. 0.066 (1.68) MIN. 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) www.vishay.com 652 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88586 Revision: 27-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1