FEC15W SERIES 15 WATTS DC-DC CONVERTER FEATURES • 15 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 4.5A • STANDARD 2.00 X 1.00 X 0.40 INCH PACKAGE • HIGH EFFICIENCY UP TO 88% • 4:1 ULTRA WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH OPTIONS Positive logic & Negative logic Remote On/Off APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment DESCRIPTION The FEC15W series offer 15 watts of output power from a 2.00 x 1.00 x 0.40 inch package. The FEC15W series with 4:1 ultra wide input voltage of 9~36 and 18~75 VDC. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Output power 15 Watts, max. Voltage accuracy ± 1% Minimum load Line regulation Load regulation 0% ± 0.2% ± 0.5% ± 0.5% ± 1% Single Dual Single Dual LL to HL at Full load No load to Full load Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% 20MHz bandwidth See table (Measured with a 0.1µF/50V MLCC) ±0.02% / ºC, max. Temperature coefficient Ripple and noise Transient response recovery time 25% load step change 250µs 3.3VDC output Over voltage protection 5VDC output Zener diode clamp 12VDC output 15VDC output Over load protection 3.9VDC 6.2VDC 15VDC 18VDC % of FL at nominal input Short circuit protection 150%. Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency Isolation voltage See table Input to Output Input(Output) to case Case grounding Isolation resistance 500VDC 1600VDC, min. 1minute 1600VDC, min. 1minute Connect case to -INPUT with decoupling Y Cap 9 10 ohms, min. Isolation capacitance 1500pF, max. Switching frequency 400kHz±10%. Safety approvals IEC60950-1, UL60950-1, & EN60950-1 Case material Nickel-coated copper Base material FR4 PCB Potting material Epoxy (UL94 V-0) 2.00 X 1.00 X 0.40 Inch (50.8 X 25.4 X 10.2 mm) Dimensions Weight MTBF (Note 1) Page 1 of 3 27g (0.95oz) MIL-HDBK-217F 2.430 x 106 hrs Input voltage range 24VDC nominal input 48VDC nominal input 9 ~ 36VDC 18 ~ 75VDC Input filter Input surge voltage Pi type 24VDC input 48VDC input 50VDC 100ms,max 100VDC 100ms,max Input reflected ripple current 20mAp-p Nominal input and Start up time Power up 20ms. constant resistive load 24VDC input 9VDC Start-up voltage 48VDC input 18VDC 24VDC input 7.5VDC Shutdown voltage 48VDC input 15VDC Remote ON/OFF (Option) (Note 6) (Positive logic) Open or 3 V < Vr < 12V DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF (Negative logic) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Open or 3 V < Vr < 12V Input current of Remote control pin Nominal input -0.5mA ~ + 0.5mA 2.5mA Remote off state input current Nominal input ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC ~ +76ºC (without derating) +76ºC ~ +105ºC (with derating) Maximum case temperature 105ºC Storage temperature range -55ºC ~ +125ºC Natural convection Thermal impedance (Note 7) Natural convection with heat-sink 12ºC/Watt 10ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 8) EN55022 Class A, Class B Air Contact ± 8kV ± 6kV Perf. Criteria B ESD EN61000-4-2 Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 9) EN61000-4-4 ± 2kV Perf. Criteria B Surge (Note 9) EN61000-4-5 ± 1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A www.pduke.com 2014/4/30 FEC15W SERIES 15 WATTS Model Number Input Range Output Voltage FEC15-24S3P3W FEC15-24S05W FEC15-24S5P1W FEC15-24S12W FEC15-24S15W FEC15-24D05W FEC15-24D12W FEC15-24D15W FEC15-48S3P3W FEC15-48S05W FEC15-48S5P1W FEC15-48S12W FEC15-48S15W FEC15-48D05W FEC15-48D12W FEC15-48D15W 9 ~36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 3.3 VDC 5 VDC 5.1 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 5.1 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC (2) Output Current Min. load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA DC-DC CONVERTER Full load 4500mA 3000mA 3000mA 1250mA 1000mA ± 1500mA ± 625mA ± 500mA 4500mA 3000mA 3000mA 1250mA 1000mA ± 1500mA ± 625mA ± 500mA (3) (4) Output No Load Ripple & Noise Input Current 50mVp-p 50mVp-p 50mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p 50mVp-p 50mVp-p 50mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p (5) Eff (%) 50mA 65mA 65mA 22mA 22mA 55mA 30mA 30mA 35mA 35mA 35mA 15mA 15mA 35mA 17mA 17mA Capacitor Load max 86 87 87 87 87 87 88 88 86 88 88 87 87 88 88 88 14700µF 7200µF 7200µF 1250µF 800µF ± 3600µF ± 625µF ± 400µF 14700µF 7200µF 7200µF 1250µF 800µF ± 3600µF ± 625µF ± 400µF Note: 1. 2. 3. 4. 5. 6. MIL-HDBK-217F @Ta=25 ºC, Full load. Typical value at nominal input and full load. (20MHZ BW.) Typical value at nominal input and no load. Typical value at nominal input and full load. Test by minimum input and constant resistive load. The ON/OFF control pin voltage is referenced to -INPUT . To order positive logic ON/OFF control add the suffix-P (Ex: FEC15-48S05W-P) To order negative logic ON/OFF control add the suffix-N (Ex: FEC15-48S05W-N) 7. Heat-sink is optional and P/N: 7G-0020C-F. 8. The FEC15W series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 9. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 F/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. μ O U T P U T P O W E R (% ) FEC15-48S05W Derating Curve 120 O U T P U T P O W E R (% ) 120 100 80 Natural convection 100LFM 200LFM 300LFM 400LFM 500LFM 60 40 20 0 -40 -20 0 20 40 60 80 80.4 105 100 100 80 40 20 0 120 -40 E F F IC IE N C Y (% ) EFFICIENCY(%) 90 88 86 84 82 80 78 30 36 42 48 54 60 66 72 0 20 40 60 95 90 85 80 75 70 65 60 55 50 45 84.5 80 105 100 120 FEC15-48S05W Efficiency VS Output Load 10 INPUT VOLTAGE (V) Page 2 of 3 -20 AMBIENT TEMPERATURE(℃ ) FEC15-48S05W Efficiency VS Input Voltage 24 Natural convection 100LFM 200LFM 300LFM 400LFM 500LFM 60 AMBIENT TEMPERATURE(℃) 18 FEC15-48S05W Derating Curve With Heatsink (Note 7 ) 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) www.pduke.com 2014/4/30 FEC15W SERIES 15 WATTS MECHANICAL DRAWING DC-DC CONVERTER ： PIN CONNECTION PIN SINGLE DUAL 1 + INPUT + INPUT 2 - INPUT - INPUT 3 + OUTPUT + OUTPUT 4 NO PIN COMMON 5 - OUTPUT - OUTPUT 6 CTRL(Option) CTRL(Option) 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) Page 3 of 3 www.pduke.com 2014/4/30