Pan Jit ER2002ST T0 00001 Isolation superfast recovery rectifier Datasheet

ER2002ST
ISOLATION SUPERFAST RECOVERY RECTIFIER
VOLTAGE
200 Volts
CURRENT
20 Amperes
0.615(15.60)MAX.
FEATURES
0.520(13.20)
0.504(12.80)
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O.
Flame Retardant Epoxy Molding Compound.
0.185(4.70)
0.169(4.30)
• High surge capacity.
• Super fast recovery times, high voltage.
• Epitaxial chip construction.
• Lead free in comply with EU RoHS 2002/95/EC directives
0.071(1.80)
0.055(1.40)
0.095(2.40)
0.078(2.00)
0.050(1.25)
0.037(0.95)
0.118(3.0)
MIN.
0.599(15.20)
0.582(14.80)
0.577(14.65)
0.565(14.35)
0.776(19.70)
0.759(19.30)
• Low forward voltage, high current capability
0.579(14.70)
0.563(14.30)
• Low power loss, high efficiency.
0.166(4.20)
0.149(3.80)
0.732(18.58)
0.715(18.18)
• Exceeds environmental standards of MIL-S-19500/228
0.516(13.20)
0.504(12.80)
0.402(10.20)
0.385(9.80)
0.025(0.62)
0.014(0.38)
MECHANICAL DATA
• Case: TO-3PS Molded plastic
0.223(5.65)
0.206(5.25)
0.103(2.60)
0.090(2.30)
0.223(5.65)
0.206(5.25)
• Terminals: Lead solderable per MIL-STD-750, Method 2026
• Polarity: As marked.
• Standard packaging: Any
• Weight: 0.1932 ounces, 5.48 grams.
MAXIMUM RATING AND ELECTRICAL CHARACTERISTICSS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
PARAMETER
SYMBOL
VALUE
UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
200
V
Maximum RMS Voltage
VRMS
140
V
Maximum DC Blocking Voltage
VDC
200
V
Maximum Average Forward Current
per device
per diode
IF(AV)
20
10
A
Peak Forward Surge Current : 8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
per diode
IFSM
150
A
Maximum Forward Voltage at 10A
per diode
VF
1
V
Maximum DC Reverse Current at Rated DC Blocking Voltage
per diode
IR
10
μA
trr
25
ns
RθJC
2
TJ,TSTG
-55 to +150
Maximum Reverse Recovery Time (Note 1)
Typical Thermal Resistance (Note 2)
Operating Junction and Storage Temperature Range
per diode
O
C/W
O
C
NOTES:
1. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A.
2. Semi-infinite heatsink.
August 3,2012-REV.00
PAGE . 1
12
10
8
6
4
2
0
0
25
50
75
100
125
150
CJ, Junction Capacitance
(pF)
IF, Forward Current (A)
ER2002ST
1000
100
10
1
0.1
TC, Case Temperature (°C)
100
TJ = 150°C
IF, Forward Current (A)
IR, Reverse Current (uA)
100
Fig.2 Typical Junction Capacitance
100
10
TJ = 125°C
0.1
10
VR, Reverse Bias Voltage (V)
Fig.1 Forward Current Derating Curve
1
1
TJ = 75°C
0.01
TJ = 25°C
0.001
TJ = 150°C
10
TJ = 125°C
1
TJ = 25°C
0.1
TJ = 75°C
0.01
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Fig.3 Typical Reverse Characteristics
August 3,2012-REV.00
0.2
0.4
0.6
0.8
1
1.2
VF, Forward Voltage (V)
Fig.4 Typical Forward Characteristics
PAGE . 2
ER2002ST
Part No_packing code_Version
ER2002ST_T0_00001
ER2002ST_T0_10001
For example :
RB500V-40_R2_00001
Serial number
Version code means HF
Part No.
Packing size code means 13"
Packing type means T/R
Packing Code XX
Packing type
Tape and Ammunition Box
(T/B)
Tape and Reel
(T/R)
Bulk Packing
(B/P)
Tube Packing
(T/P)
Tape and Reel (Right Oriented)
(TRR)
Tape and Reel (Left Oriented)
(TRL)
FORMING
August 3,2012-REV.00
Version Code XXXXX
1st Code
Packing size code
A
N/A
0
HF
0
serial number
R
7"
1
RoHS
1
serial number
B
13"
2
T
26mm
X
S
52mm
Y
L
F
PANASERT T/B CATHODE UP
(PBCU)
PANASERT T/B CATHODE DOWN
(PBCD)
2nd Code HF or RoHS 1st Code 2nd~5th Code
U
D
PAGE . 3
ER2002ST
Disclaimer
• Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
• Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
• Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
• Panjit International Inc. does not assume any and all implied warranties, including warranties
of fitness for particular purpose, non-infringement and merchantability.
• Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications.
Panjit International Inc. makes no representation or warranty that such applications will be
suitable for the specified use without further testing or modification.
•
The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
August 3,2012-REV.00
PAGE . 4
Similar pages