AZETTLER AZ880-1AB-9D 10 a spst / 8 a dpst polarized subminiature power relay single side stable (non-latching) and bistable (latching) Datasheet

AZ880
AZ
10 A SPST / 8 A DPST POLARIZED
SUBMINIATURE POWER RELAY
SINGLE SIDE STABLE (NON-LATCHING)
AND BISTABLE (LATCHING)
FEATURES
•
•
•
•
•
Dielectric strength 4000 Vrms
Single and dual coil latching versions available
Epoxy sealed version available
10 Amp switching
UL, CUR file E44211
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 106 at 10 A 250 VAC resistive (SPST)
Operate Time (typical)
5 ms at nominal coil voltage
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
Set Time (typical)
5 ms at nominal coil voltage
Reset Time (typical)
4 ms at nominal coil voltage
Dielectric Strength
(at sea level)
4000
3000
1000
2000
Insulation Resistance
1000 megohms min. at 20°C
500 Vdc 50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062” DA at 10 to 55 Hz
Shock
10 g functional
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
6 grams
CONTACTS
Arrangement
SPST (1 Form A), DPST (2 Form A)
DPST (1 Form A and 1 Form B)
Ratings
Resistive load:
Max. switched power: 300 W or 2500 VA (SPST)
240 W or 2000 VA (DPST)
Max. switched current: 10 A (SPST)
8 A (DPST)
Max. switched voltage: 150 VDC or 380 VAC*
*Note: If switching voltage is greater than 30 VDC,
special precautions must be taken. Please contact
the factory.
Rated Load
UL, CUR
SPST
10 A at 250 VAC general use, 30k cycles
10 A at 30 VDC resistive, 30k cycles
1/3 HP at 250 VAC
B300 Pilot Duty
DPST
8 A at 250 VAC general use, 30k cycles
8 A at 30 VDC resistive, 30k cycles
1/3 HP at 250 VAC
1/4 HP at 125 VAC
Material
Silver nickel, gold plating optional
Resistance
< 50 milliohms initially (6 V 1 A voltage drop
method)
Vrms
Vrms
Vrms
Vrms
coil to contact (-1A, -1AB)
coil to contact (-2A)
between contacts
between contact sets
COIL
Power
At Pickup Voltage
137 mW ( 2A single side stable, 2 coil
latching)
(typical)
98 mW (1 coil latching or 1A or 1AB single
side stable)
Max. Continuous
Dissipation
0.75 W at 20°C (68°F) ambient
Temperature Rise
30°C (54°F) at nominal coil voltage
Max. Temperature
105°C (221°F)
NOTES
1.
2.
3.
4.
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
9/6/06W
AZ880
AZ
RELAY ORDERING DATA
AZ880
COIL SPECIFICATIONS - 1 FORM A AND 1 FORM A/1 FORM B
Nominal
Coil
VDC
3
Must.
Operate
VDC
2.1
5
6
Max. Continuous
VDC
ORDER NUMBER*
1 Form A
1 Form A
1 Form B
5.8
Coil
Resistance
± 10%
45
AZ880-1A-3D
AZ880-1AB-3D
3.5
9.7
125
AZ880-1A-5D
AZ880-1AB-5D
4.2
11.6
180
AZ880-1A-6D
AZ880-1AB-6D
9
6.3
17.4
405
AZ880-1A-9D
AZ880-1AB-9D
12
8.4
23.2
720
AZ880-1A-12D
AZ880-1AB-12D
24
16.8
46.5
2880
AZ880-1A-24D
AZ880-1AB-24D
*Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil.
AZ880
COIL SPECIFICATIONS - 2 FORM A
ORDER NUMBER*
Nominal
Coil
VDC
3
Must.
Operate
VDC
2.1
Max. Continuous
VDC
4.9
Coil
Resistance
± 10%
32.1
5
3.5
AZ880-2A-3D
8.2
89.3
AZ880-2A-5D
6
9
4.2
9.8
129
AZ880-2A-6D
6.3
14.7
289
AZ880-2A-9D
12
8.4
19.6
514
AZ880-2A-12D
24
16.8
39.3
2056
AZ880-2A-24D
2 Form A
*Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil.
AZ880P1
COIL SPECIFICATIONS - SINGLE COIL LATCHING
Nominal
Coil
VDC
3
Must.
Operate
VDC
2.1
Max. Continuous
VDC
5
3.5
6
ORDER NUMBER*
5.8
Coil
Resistance
± 10%
45
2 Form A
1 Form A
1 Form B
9.7
125
AZ880P1-1A-3D
AZ880P1-2A-3D
AZ880P1-1AB-3D
AZ880P1-1A-5D
AZ880P1-2A-5D
4.2
11.6
AZ880P1-1AB-5D
180
AZ880P1-1A-6D
AZ880P1-2A-6D
AZ880P1-1AB-6D
1 Form A
9
6.3
17.4
405
AZ880P1-1A-9D
AZ880P1-2A-9D
AZ880P1-1AB-9D
12
8.4
23.2
720
AZ880P1-1A-12D
AZ880P1-2A-12D
AZ880P1-1AB-12D
24
16.8
46.5
2880
AZ880P1-1A-24D
AZ880P1-2A-24D
AZ880P1-1AB-24D
*Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil.
AZ880P2
COIL SPECIFICATIONS - DUAL COIL LATCHING
ORDER NUMBER*
Nominal
Coil
VDC
3
Must.
Operate
VDC
2.1
Max. Continuous
VDC
AZ880P2-1A-3D
AZ880P2-2A-3D
AZ880P2-1AB-3D
5
3.5
8.2
89.3
AZ880P2-1A-5D
AZ880P2-2A-5D
AZ880P2-1AB-5D
6
4.2
9.8
129
AZ880P2-1A-6D
AZ880P2-2A-6D
AZ880P2-1AB-6D
9
6.3
14.7
289
AZ880P2-1A-9D
AZ880P2-2A-9D
AZ880P2-1AB-9D
12
8.4
19.6
514
AZ880P2-1A-12D
AZ880P2-2A-12D
AZ880P2-1AB-12D
24
16.8
39.3
2056
AZ880P2-1A-24D
AZ880P2-2A-24D
AZ880P2-1AB-24D
4.9
Coil
Resistance
± 10%
32.1
1 Form A
2 Form A
1 Form A
1 Form B
*Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil.
9/6/06W
AZ880
AZ
MECHANICAL DATA
PC Board Layout
Outline Dimensions
Single side stable or 1 coil latching relay
Single side stable or 1 coil latching relay
2A &1AB
1A
0.787MAX
[20.0]
0.591MAX
[15.0]
0.402MAX
[10.2]
0.031
[0.80]
0.031
[0.8]
0.142
[3.6]
0.049
[1.25]
0.400
[10.16]
0.300
[7.62]
0.049
[1.25]
0.400
[10.16]
0.400
[10.16]
0.300
[7.62]
0.400
[10.16]
[0.80]
0.400
[10.16]
0.400
[10.16]
0.400
[10.16]
0.016
[0.4]
0.031
[0.8]
0.300
[7.62]
0.400
[10.16]
4-Ø0.047
[Ø1.2]
0.787MAX
[20.0]
2A &1AB
0.787MAX
[20.0]
0.591MAX
[15.0]
0.591MAX
[15.0]
1A
2A &1AB
0.400
[10.16]
0.402MAX
[10.2]
0.402MAX
[10.2]
0.300
[7.62]
0.400
[10.16]
0.300
[7.62]
0.142
[3.6]
0.142
[3.6]
0.049
[1.25]
6-Ø0.047
[Ø1.2]
2 coil latching relay
2 coil latching relay
1A
0.300
[7.62]
0.402MAX
[10.2]
0.142
[3.6]
0.016
[0.4]
2A &1AB
1A
0.591MAX
[15.0]
0.787MAX
[20.0]
0.400
[10.16]
0.100
[2.54]
0.031
[0.8]
0.300
[7.62]
0.016
[0.4]
0.400
[10.16]
0.400
[10.16]
0.049
[1.25]
0.100
[2.54]
0.300
[7.62]
0.031
[0.8]
0.016
[0.4]
0.400
[10.16]
0.400
[10.16]
0.400
[10.16]
0.100
[2.54]
0.100
[2.54]
6-Ø0.047
[Ø1.2]
8-Ø0.047
[Ø1.2]
Viewed toward terminals
Wiring Diagram
Single side stable
2A
1A
-
-
+
+
2A
1A
1AB
-
-
SET
+
2 coil latching relay
1 coil latching relay
+
+
RESET
-
-
SET
RESET
+
1AB
+
-
-
SET
+
RESET
+
-
2A
1A
-
SET
+
-
-
RESET
+
SET
+
-
1AB
-
RESET
+
SET
+
-
RESET
+
Viewed toward terminals. Relays shown in de-energized or reset state.
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
9/6/06W
Similar pages