TI1 ADS1204IRHBT Four 1-bit, 10mhz, 2nd-order delta-sigma modulator Datasheet

ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
Four 1-Bit, 10MHz, 2nd-Order
Delta-Sigma Modulators
FEATURES
1
• 16-Bit Resolution
• 14-Bit Linearity
• Resolution/Speed Trade-Off: 10-Bit Effective
Resolution with 10µs Signal Delay (12-Bit with
19µs)
• ±2.5V Input Range at 2.5V
• Internal Reference Voltage: 2%
• Gain Error: 0.5%
• Four Independent Delta-Sigma Modulators
• Four Input Reference Buffers
• Onboard 20MHz Oscillator
• Selectable Internal or External Clock
• Operating Temperature Range:
–40°C to +105°C
• QFN-32 (5×5) Package
2
APPLICATIONS
•
•
•
•
•
•
•
•
Motor Control
Current Measurement
Industrial Process Control
Instrumentation
Smart Transmitters
Portable Instruments
Weight Scales
Pressure Transducers
DESCRIPTION
The ADS1204 is a four-channel, high-performance
device, with four delta-sigma (ΔΣ) modulators with
100dB dynamic range, operating from a single +5V
supply. The differential inputs are ideal for direct
connection to transducers in an industrial
environment. With the appropriate digital filter and
modulator rate, the device can be used to achieve
16-bit analog-to-digital (A/D) conversion with no
missing code. Effective resolution of 12 bits can be
obtained with a digital filter data rate of 160kHz at a
modulator rate of 10MHz. The ADS1204 is designed
for use in medium- to high-resolution measurement
applications including current measurements, smart
transmitters, industrial process control, weight scales,
chromatography, and portable instrumentation. It is
available in a QFN-32 (5×5) package.
AVDD
CH A+
CH A-
2nd-Order
DS Modulator
BVDD
OUT A
Output
Interface
Circuit
REFIN A
OUT B
OUT C
OUT D
CLKOUT
CH B+
CH B-
2nd-Order
DS Modulator
REFIN B
Divider
CH C+
CH C-
2nd-Order
DS Modulator
Clock
Select
REFIN C
CH D+
CH D-
2nd-Order
DS Modulator
CLKSEL
EN
RC
Oscillator
20MHz
REFIN D
REFOUT
Out
CLKIN
Reference
Voltage
2.5V
AGND
BGND
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2009, Texas Instruments Incorporated
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION (1)
PRODUCT
MAXIMUM
INTEGRAL
LINEARITY
ERROR
(LSB)
MAXIMUM
GAIN
ERROR (%)
PACKAGELEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ADS1204
±3
±0.5
QFN-32
RHB
–40°C to +105°C
ADS1204I
(1)
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
ADS1204IRHBT
Tape and Reel, 250
ADS1204IRHBR
Tape and Reel, 3000
For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS (1)
Over operating free-air temperature range, unless otherwise noted.
Supply voltage, AVDD to AGND
Supply voltage, BVDD to BGND
ADS1204
UNIT
–0.3 to 6
V
–0.3 to 6
V
Analog input voltage with respect to AGND
AGND – 0.3 to AVDD + 0.3
V
Reference input voltage with respect to AGND
AGND – 0.3 to AVDD + 0.3
V
Digital input voltage with respect to BGND
BGND – 0.3 to BVDD + 0.3
V
±0.3
V
Ground voltage difference, AGND to BGND
Voltage differences, BVDD to AGND
Input current to any pin except supply
Power dissipation
–0.3 to 6
V
±10
mA
See Dissipation Ratings table
Operating virtual junction temperature range, TJ
–40 to +150
°C
Storage temperature range, TSTG
–65 to +150
°C
260
°C
Lead temperature (1.6mm or 1/16″ from case for 10s)
(1)
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
PARAMETER
MIN
NOM
MAX
UNIT
Supply voltage, AVDD to AGND
4.75
5
5.25
V
3.6
V
Supply voltage, BVDD to BGND
Low-voltage levels
2.7
5V logic levels
4.5
5
5.5
V
0.5
2.5
2.6
V
AVDD
V
Reference input voltage
Operating common-mode signal
Analog inputs
0
+IN – (–IN)
0
±REFIN
V
24
MHz
–40
+125
°C
–40
+105
°C
External clock (1)
16
Operating free-air temperature range, TA
Specified free-air temperature range, TA
(1)
2
20
With reduced accuracy, clock can go from 1MHz up to 32MHz; see Typical Characteristic curves.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
DISSIPATION RATINGS
(1)
PACKAGE
TA ≤ +25°C
POWER RATING
DERATING FACTOR
ABOVE TA =
+25°C (1)
TA = +70°C
POWER RATING
TA = +85°C
POWER RATING
TA = +105°C
POWER RATING
QFN-32 (5×5)
3406mW
27.25mW/°C
2180mW
1771mW
1226mW
This is the inverse of the traditional junction-to-ambient thermal resistance (RθJA). Thermal resistances are not production tested and are
for informational purposes only.
ELECTRICAL CHARACTERISTICS
Over recommended operating free-air temperature range at –40°C to +105°C, AVDD = 5V, BVDD = 3V, CH x+ = 0.5V to 4.5V,
CH x– = 2.5V, REFIN = REFOUT = internal +2.5V, CLKIN = 20MHz, and 16-bit Sinc3 filter with decimation by 256, unless
otherwise noted.
ADS1204
PARAMETER
TEST CONDITIONS
RESOLUTION
MIN
TYP (1)
MAX
16
UNIT
Bits
DC ACCURACY
Integral linearity error (2)
INL
±1
±3
±0.001
±0.005
±6
Integral linearity match
DNL
Differential nonlinearity (3)
VOS
Input offset error
±0.009
–1.4
Input offset error match
TCVOS
Input offset error drift
GERR
Gain error (4)
Referenced to VREF
Gain error match
TCGERR
Gain error drift
PSRR
Power-supply rejection ratio
4.75V < AVDD < 5.25V
LSB
% FSR
LSB
% FSR
±1
LSB
±3
mV
±2
mV
±2
±8
µV/°C
±0.08
±0.5
% FSR
±0.185
±0.5
% FSR
±2
ppm/°C
78
dB
ANALOG INPUT
FSR
Full-scale differential range
(CH x+) – (CH x–); CH x– = 2.5V
Specified differential range
(CH x+) – (CH x–); CH x– = 2.5V
Maximum operating input range (3)
0
Input capacitance
Common-mode
Input leakage current
CLK turned off
±2.5
V
±2
V
AVDD
1.5
V
pF
±1
nA
Differential input resistance
100
Differential input capacitance
2.5
pF
At DC
100
dB
VIN = ±1.25VPP at 40kHz
110
dB
50
MHz
CMRR
Common-mode rejection ratio
BW
Bandwidth
FS sine wave, –3dB
kΩ
SAMPLING DYNAMICS
CLKIN
(1)
(2)
(3)
(4)
Internal clock frequency
CLKSEL = 1
8
10
12
MHz
External clock frequency
CLKSEL = 0
1
20
24
MHz
All typical values are at TA = +25°C.
Integral nonlinearity is defined as the maximum deviation of the line through the end points of the specified input range of the transfer
curve for CH x+ = –2V to +2V at 2.5V, expressed either as the number of LSBs or as a percent of measured input range (4V).
Specified by design.
Maximum values, including temperature drift, are specified over the full specified temperature range.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
3
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
ELECTRICAL CHARACTERISTICS (continued)
Over recommended operating free-air temperature range at –40°C to +105°C, AVDD = 5V, BVDD = 3V, CH x+ = 0.5V to 4.5V,
CH x– = 2.5V, REFIN = REFOUT = internal +2.5V, CLKIN = 20MHz, and 16-bit Sinc3 filter with decimation by 256, unless
otherwise noted.
ADS1204
PARAMETER
TYP (1)
MAX
UNIT
VIN = ±2VPP at 5kHz;
–40°C ≤ TA ≤ +85°C
–96
–88
dB
VIN = ±2VPP at 5kHz;
–40°C ≤ TA ≤ +105°C
–96
–87
dB
TEST CONDITIONS
MIN
AC ACCURACY
THD
Total harmonic distortion
SFDR
Spurious-free dynamic range
VIN = ±2VPP at 5kHz
92
100
dB
SNR
Signal-to-noise ratio
VIN = ±2VPP at 5kHz
86
89
dB
SINAD
Signal-to-noise + distortion
VIN = ±2VPP at 5kHz
85
89
dB
Channel-to-channel isolation (5)
VIN = ±2VPP at 50kHz
85
dB
14.5
Bits
ENOB
Effective number of bits
14
VOLTAGE REFERENCE OUTPUT
VOUT
Reference voltage output
dVOUT/dT
Output voltage temperature drift
Output voltage noise
2.450
2.5
2.550
V
±20
ppm/°C
f = 0.1Hz to 10Hz, CL = 10µF
10
µVrms
f = 10Hz to 10kHz, CL = 10µF
12
µVrms
60
dB
PSRR
Power-supply rejection ratio
IOUT
Output current
10
µA
ISC
Short-circuit current
0.5
mA
100
µs
Turn-on settling time
to 0.1% at CL = 0
VOLTAGE REFERENCE INPUT
VIN
Reference voltage input
0.5
Reference input resistance
Reference input capacitance
2.5
2.6
V
100
MΩ
5
pF
Reference input current
1
µA
V
DIGITAL INPUTS (6)
Logic family
CMOS with Schmitt Trigger
VIH
High-level input voltage
0.7 × BVDD
BVDD + 0.3
VIL
Low-level input voltage
–0.3
0.3 × BVDD
V
IIN
Input current
±50
nA
CI
Input capacitance
VI = BVDD or GND
5
pF
DIGITAL OUTPUTS (6)
Logic family
CMOS
VOH
High-level output voltage
BVDD = 4.5V, IOH = –100µA
VOL
Low-level output voltage
BVDD = 4.5V, IOL = +100µA
CO
Output capacitance
CL
Load capacitance
4
V
0.5
5
V
pF
30
Data format
(5)
(6)
4.44
pF
Bit stream
Specified by design.
Applicable for 5.0V nominal supply: BVDD (min) = 4.5V and BVDD (max) = 5.5V.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
ELECTRICAL CHARACTERISTICS (continued)
Over recommended operating free-air temperature range at –40°C to +105°C, AVDD = 5V, BVDD = 3V, CH x+ = 0.5V to 4.5V,
CH x– = 2.5V, REFIN = REFOUT = internal +2.5V, CLKIN = 20MHz, and 16-bit Sinc3 filter with decimation by 256, unless
otherwise noted.
ADS1204
PARAMETER
DIGITAL INPUTS
TEST CONDITIONS
MIN
TYP (1)
MAX
UNIT
(7)
Logic family
LVCMOS
VIH
High-level input voltage
BVDD = 3.6V
2
BVDD + 0.3
VIL
Low-level input voltage
BVDD = 2.7V
–0.3
0.8
V
IIN
Input current
VI = BVDD or GND
±50
nA
CI
Input capacitance
DIGITAL OUTPUTS
5
V
pF
(7)
Logic family
LVCMOS
VOH
High-level output voltage
BVDD = 2.7V, IOH = –100µA
VOL
Low-level output voltage
BVDD = 2.7V, IOL = +100µA
CO
Output capacitance
CL
Load capacitance
BVDD – 0.2
V
0.2
5
Data format
V
pF
30
pF
Bit stream
POWER SUPPLY
AVDD
BVDD
Analog supply voltage
Buffer I/O supply voltage
AIDD
Analog operating supply current
BIDD
Buffer I/O operating supply current
Power dissipation
(7)
4.5
5.5
V
Low-voltage levels
2.7
3.6
V
5V logic levels
4.5
5.5
V
CLKSEL = 1
22.5
30
mA
CLKSEL = 0
22.4
29
mA
BVDD = 3V, CLKOUT = 10MHz
4
mA
BVDD = 5V, CLKOUT = 10MHz
4
mA
CLKSEL = 0
122
145
mW
CLKSEL = 1
112.5
150
mW
Applicable for 3.0V nominal supply: BVDD (min) = 2.7V and BVDD (max) = 3.6V.
EQUIVALENT INPUT CIRCUITS
BVDD
AVDD
RON
650W
C(SAMPLE)
1pF
AIN
DIN
Diode Turn-On Voltage: 0.35V
AGND
BGND
Equivalent Analog Input Circuit
Equivalent Digital Input Circuit
NOTE: The thermal pad is internally connected to the substrate. This pad can be connected to the analog ground or left floating. Keep the
thermal pad separate from the digital ground, if possible.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
5
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
PIN ASSIGNMENTS
REFIN A
REFIN B
AGND
AVDD
REFOUT
AVDD
AGND
NC
32
31
30
29
28
27
26
25
RHB PACKAGE(1)
QFN-32
(TOP VIEW)
CH A+
1
24
OUT A
CH A-
2
23
OUT B
CH B+
3
22
OUT C
CH B-
4
21
OUT D
CH C-
5
20
CLKOUT
CH C+
6
19
BGND
CH D-
7
18
BVDD
CH D+
8
17
CLKIN
9
10
11
12
13
14
15
16
REFIN D
REFIN C
AGND
AVDD
NC
AVDD
AGND
CLKSEL
ADS1204
(1) The thermal pad is internally connected to the substrate. This pad can be connected to the analog ground or left floating. Keep the
thermal pad separate from the digital ground, if possible.
TERMINAL FUNCTIONS
TERMINAL
NAME
NO.
I/O (1)
CH A+
1
AI
Analog input of channel A: noninverting input
CH A–
2
AI
Analog input of channel A: inverting input
CH B+
3
AI
Analog input of channel B: noninverting input
CH B–
4
AI
Analog input of channel B: inverting input
CH C–
5
AI
Analog input of channel C: inverting input
CH C+
6
AI
Analog input of channel C: noninverting input
CH D–
7
AI
Analog input of channel D: inverting input
CH D+
8
AI
Analog input of channel D: noninverting input
REFIN D
9
AI
Reference voltage input of channel D: pin for external reference voltage
REFIN C
10
AI
Reference voltage input of channel C: pin for external reference voltage
AGND
11
—
Analog ground
AVDD
12
P
Analog power supply; nominal 5V
NC
13
—
No connection; this pin is left unconnected
AVDD
14
P
Analog power supply; nominal 5V
AGND
15
—
Analog ground
CLKSEL
16
I
Clock select between internal clock (CLKSEL = 1) or external clock (CLKSEL = 0)
CLKIN
17
I
External clock input
BVDD
18
P
Digital interface power supply; from 2.7V to 5.5V
BGND
19
—
Interface ground
CLKOUT
20
O
System clock output
(1)
6
DESCRIPTION
AI = Analog Input; AO = Analog Output; I = Input; O = Output; P = Power Supply.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
TERMINAL FUNCTIONS (continued)
TERMINAL
NAME
NO.
I/O (1)
OUT D
21
O
Bit stream from channel D modulator
OUT C
22
O
Bit stream from channel C modulator
OUT B
23
O
Bit stream from channel B modulator
OUT A
24
O
Bit stream from channel A modulator
NC
25
—
No connection; this pin is left unconnected
AGND
26
—
Analog ground
AVDD
27
P
Analog power supply; nominal 5V
REFOUT
28
AO
AVDD
29
P
Analog power supply; nominal 5V
AGND
30
—
Analog ground
REFIN B
31
AI
Reference voltage input of channel B: pin for external reference voltage
REFIN A
32
AI
Reference voltage input of channel A: pin for external reference voltage
DESCRIPTION
Reference voltage output: output pin of the internal reference source; nominal 2.5V
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
7
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
PARAMETER MEASUREMENT INFORMATION
tC1
CLKIN
tW1
tC2
tD1
tD2
CLKOUT
tD3
tW2
tD4
OUT x
Figure 1. ADS1204 Timing Diagram
TIMING REQUIREMENTS: 5.0V (1)
Over recommended operating free-air temperature range at –40°C to +105°C, AVDD = 5V, and BVDD = 5V, unless otherwise
noted.
PARAMETER
MIN
MAX
UNIT
41.6
1000
ns
CLKIN high time
10
tC1 – 10
ns
CLKOUT period using internal oscillator (CLKSEL = 1)
83
125
ns
tC1
CLKIN period
tW1
tC2
CLKOUT period using external clock (CLKSEL = 0)
tW2
CLKOUT high time
tD1
tD2
tD3
tD4
(1)
2 × tC1
ns
(tC2/2) – 5
(tC2/2) + 5
ns
CLKOUT rising edge delay after CLKIN rising edge
0
10
ns
CLKOUT falling edge delay after CLKIN rising edge
0
10
ns
Data valid delay after rising edge of CLKOUT (CLKSEL = 1)
(tC2/4) – 8
(tC2/4) + 8
ns
Data valid delay after rising edge of CLKOUT (CLKSEL = 0)
tW1 – 3
tW1 + 7
ns
Applicable for 5.0V nominal supply: BVDD (min) = 4.5V and BVDD (max) = 5.5V. All input signals are specified with tR = tF = 5ns (10% to
90% of BVDD) and timed from a voltage level of (VIL + VIH)/2. See Figure 1.
TIMING REQUIREMENTS: 3.0V (1)
Over recommended operating free-air temperature range at –40°C to +105°C, AVDD = 5V, and BVDD = 5V, unless otherwise
noted.
PARAMETER
tC1
CLKIN period
tW1
CLKIN high time
tC2
CLKOUT period using internal oscillator (CLKSEL = 1)
CLKOUT period using external clock (CLKSEL = 0)
tW2
CLKOUT high time
tD1
tD2
tD3
tD4
(1)
8
MIN
MAX
UNIT
41.6
1000
ns
10
tC1 – 10
ns
83
125
ns
2 × tC1
ns
(tC2/2) – 5
(tC2/2) + 5
ns
CLKOUT rising edge delay after CLKIN rising edge
0
10
ns
CLKOUT falling edge delay after CLKIN rising edge
0
10
ns
Data valid delay after rising edge of CLKOUT (CLKSEL = 1)
(tC2/4) – 8
(tC2/4) + 8
ns
Data valid delay after rising edge of CLKOUT (CLKSEL = 0)
tW1 – 3
tW1 + 7
ns
Applicable for 3.0V nominal supply: BVDD (min) = 2.7V and BVDD (max) = 3.6V. All input signals are specified with tR = tF = 5ns (10% to
90% of BVDD) and timed from a voltage level of (VIL + VIH)/2. See Figure 1.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
TYPICAL CHARACTERISTICS
AVDD = 5V, BVDD = 3V, CH x+ = +0.5V to +4.5V, CH x– = +2.5V, REFIN = external, CLKSEL = 0, and 16-bit Sinc3 filter, with
OSR = 256, unless otherwise noted.
INTEGRAL NONLINEARITY vs INPUT SIGNAL
(CLKIN = 20MHz)
INTEGRAL NONLINEARITY vs INPUT SIGNAL
(CLKIN = 32MHz)
1.0
1.0
0.5
0.5
INL (LSB)
1.5
INL (LSB)
1.5
0
-0.5
-0.5
+25°C
-40°C
+85°C
-1.0
-1.5
-2.0
-1.5
+105°C
+125°C
-1.0
-1.0 -0.5
0
0.5
1.0
Differential Input Voltage (V)
1.5
+105°C
+125°C
-1.0 -0.5
0
0.5
1.0
Differential Input Voltage (V)
-1.5
INTEGRAL LINEARITY MATCH OF CHANNELS
vs INPUT SIGNAL
MAXIMUM INTEGRAL NONLINEARITY
vs TEMPERATURE
0.3
0.00046
1.2
0
-0.1
-0.00015
-0.2
-0.00031
-0.3
-0.00046
-1.5
-1.0 -0.5
0
0.5
1.0
Differential Input Voltage (V)
External 20MHz Clock
INL (LSB)
CLKIN = 20MHz
INL (%)
0.00015
0.1
0.9
0.6
External 32MHz Clock
0.3
-0.00061
2.0
1.5
0
-40 -25 -10
5
Figure 4.
20 35 50 65
Temperature (°C)
80
95
110 125
Figure 5.
OFFSET vs TEMPERATURE
OFFSET MATCH vs TEMPERATURE
-1.20
0.45
-1.25
0.44
0.43
-1.30
Offset Match (mV)
Offset Voltage (mV)
2.0
1.5
0.00031
CLKIN = 32MHz
-1.35
1.5
Figure 3.
0.00061
-0.4
-2.0
+25°C
-40°C
+85°C
Figure 2.
0.2
INL (LSB)
-1.5
-2.0
2.0
0.4
0
0
External 20MHz Clock
-1.40
-1.45
External 32MHz Clock
-1.50
-1.60
-40 -25 -10
0.41
0.40
0.39
0.38
0.37
-1.55
External 20MHz Clock
0.42
External 32MHz Clock
0.36
5
20 35 50 65
Temperature (°C)
80
95
110 125
0.35
-40 -25 -10
Figure 6.
5
20 35 50 65
Temperature (°C)
80
95
110 125
Figure 7.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
9
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
AVDD = 5V, BVDD = 3V, CH x+ = +0.5V to +4.5V, CH x– = +2.5V, REFIN = external, CLKSEL = 0, and 16-bit Sinc3 filter, with
OSR = 256, unless otherwise noted.
OFFSET vs POWER SUPPLY
INTERNAL REFERENCE vs TEMPERATURE
2.530
-1.2
2.528
Reference Voltage (V)
Offset (mV)
-1.3
CLKIN = 20MHz
-1.4
-1.5
CLKIN = 32MHz
2.526
2.524
2.522
2.520
2.518
2.516
2.514
-1.6
2.512
-1.7
4.5
4.6
4.7
4.8
4.9
5.0
5.1
5.2
5.3
5.4
2.510
-40 -25 -10
5.5
5
Power Supply (V)
20 35 50 65
Temperature (°C)
Figure 8.
0.9
0.23
0.8
0.22
0.7
0.6
0.5
External 32MHz Clock
0.3
0.21
0.20
External 32MHz Clock
0.19
0.18
0.17
0.2
External 20MHz Clock
External 20MHz Clock
0.1
0
-40 -25 -10
5
20 35 50 65
Temperature (°C)
80
0.16
95
0.15
-40 -25 -10
110 125
5
Figure 10.
SNR vs TEMPERATURE
80
95
110 125
95
110 125
SINAD vs TEMPERATURE
89.2
CLKIN = 32MHz
Signal-to-Noise + Distortion (dB)
89.4
Signal-to-Noise Ratio (dB)
20 35 50 65
Temperature (°C)
Figure 11.
89.5
CLKIN = 32MHz
89.3
89.2
89.1
89.0
CLKIN = 20MHz
88.9
88.8
88.7
4VPP
5kHz
88.5
-40 -25 -10
5
20 35 50 65
Temperature (°C)
80
95
110 125
89.0
88.8
88.6
CLKIN = 20MHz
88.4
88.2
88.0
87.8
4VPP
5kHz
87.6
-40 -25 -10
Figure 12.
10
110 125
GAIN MATCH vs TEMPERATURE
0.24
Gain Match (%)
Gain Error (%)
GAIN ERROR vs TEMPERATURE
88.6
95
Figure 9.
1.0
0.4
80
5
20 35 50 65
Temperature (°C)
80
Figure 13.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
TYPICAL CHARACTERISTICS (continued)
AVDD = 5V, BVDD = 3V, CH x+ = +0.5V to +4.5V, CH x– = +2.5V, REFIN = external, CLKSEL = 0, and 16-bit Sinc3 filter, with
OSR = 256, unless otherwise noted.
THD vs TEMPERATURE
SFDR vs TEMPERATURE
105
Spurious-Free Dynamic Range (dB)
Total Harmonic Distortion (dB)
-85
-87
-89
-91
CLKIN = 20MHz
-93
-95
-97
-99
CLKIN = 32MHz
-101
4VPP
5kHz
-103
-105
-40 -25 -10
5
20 35 50 65
Temperature (°C)
80
95
103
CLKIN = 32MHz
101
99
CLKIN = 20MHz
97
95
93
91
89
4VPP
5kHz
87
85
-40 -25 -10
110 125
5
20 35 50 65
Temperature (°C)
80
95
110 125
Figure 14.
Figure 15.
SFDR AND THD vs INPUT FREQUENCY
(CLKIN = 20MHz)
SFDR AND THD vs INPUT FREQUENCY
(CLKIN = 32MHz)
120
120
-120
-120
SFDR
110
-110
110
-100
100
-110
-90
-100
THD
90
-90
80
-80
80
-80
70
-70
70
-70
-60
100
60
60
10
Frequency (kHz)
1
-60
100
10
Frequency (kHz)
Figure 16.
Figure 17.
FREQUENCY SPECTRUM
(4096 Point FFT, fIN = 1kHz, 4VPP)
FREQUENCY SPECTRUM
(4096 Point FFT, fIN = 5kHz, 4VPP)
0
0
-20
-20
-40
-40
Magnitude (dB)
Magnitude (dB)
1
-60
-80
-100
-120
-60
-80
-100
-120
-140
-140
-160
-160
-180
THD (dB)
THD
90
SFDR (dB)
100
THD (dB)
SFDR (dB)
SFDR
-180
0
2
4
6
8
10
12
14
16
18 19
0
Frequency (kHz)
2
4
6
8
10
12
14
16
18 19
Frequency (kHz)
Figure 18.
Figure 19.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
11
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
AVDD = 5V, BVDD = 3V, CH x+ = +0.5V to +4.5V, CH x– = +2.5V, REFIN = external, CLKSEL = 0, and 16-bit Sinc3 filter, with
OSR = 256, unless otherwise noted.
ANALOG POWER-SUPPLY CURRENT
vs TEMPERATURE
ENOB vs DECIMATION RATIO
18
30
110
3
Sinc Filter
16
External 32MHz Clock
98
27
12
74
2
Sinc Filter
10
62
8
50
6
38
Current (mA)
86
SNR (dB)
ENOB (Bits)
14
24
21
External 20MHz Clock
Internal Clock
18
4
10
26
10k
100
1k
Decimation Ratio (OSR)
15
-40 -25 -10
5
Figure 20.
20 35 50 65
Temperature (°C)
80
95
110 125
Figure 21.
CMRR vs FREQUENCY
PSRR vs FREQUENCY
110
110
105
100
100
PSRR (dB)
CMRR (dB)
95
90
85
80
90
80
70
75
70
60
65
50
100
60
1
10
Input Frequency (kHz)
100
1k
10k
Frequency of Power Supply (Hz)
Figure 22.
100k
Figure 23.
CLOCK FREQUENCY vs TEMPERATURE
CLOCK FREQUENCY vs POWER SUPPLY
10.0
9.8
9.8
9.7
9.4
CLKOUT (MHz)
Frequency (MHz)
9.6
9.2
9.0
8.8
8.6
8.4
9.6
9.5
9.4
9.3
8.2
8.0
-40 -25 -10
9.2
5
20 35 50 65
Temperature (°C)
80
95
110 125
4.5
Figure 24.
12
4.7
4.9
5.1
Power Supply (V)
5.3
5.5
Figure 25.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
GENERAL DESCRIPTION
The ADS1204 is a four-channel, second-order,
CMOS device with four delta-sigma (ΔΣ) modulators,
designed for medium- to high-resolution A/D signal
conversions from dc to 39kHz (filter response –3dB) if
an oversampling ratio (OSR) of 64 is chosen. The
output of the converter (OUTX) provides a stream of
digital ones and zeros. The time average of this serial
output is proportional to the analog input voltage.
The modulator shifts the quantization noise to high
frequencies. A low-pass digital filter should be used
at the output of the ΔΣ modulator. The filter serves
two functions. First, it filters out high-frequency noise.
Second, the filter converts the 1-bit data stream at a
high sampling rate into a higher-bit data word at a
lower rate (decimation).
An application-specific integrated circuit (ASIC) or
field-programmable gate array (FPGA) could be used
to implement the digital filter. Figure 26 and Figure 27
show typical application circuits with the ADS1204
connected to an FPGA.
The overall performance (that is, speed and
accuracy) depends on the selection of an appropriate
OSR and filter type. A higher OSR produces greater
output accuracy while operating at a lower refresh
rate. Alternatively, a lower OSR produces lower
output accuracy, but operates at a higher refresh
rate. This system allows flexibility with the digital filter
design and is capable of A/D conversion results that
have a dynamic range exceeding 100dB with an OSR
equal to 256.
2 kW
5kW
AVDD
+5V
±5V
BVDD
27W
0.1mF
CH A+
OPA4350
0.1nF
5kW
CH A-
OUT A
2nd-Order
DS Modulator
Output
Interface
Circuit
2kW
REFIN A
OUT B
OUT C
OUT D
CLKOUT
2kW
5kW
CH B+
CH B-
+5V
±5V
0.1mF
REFIN B
OPA4350
Divider
0.1nF
5kW
CH C+
2kW
CH C-
2nd-Order
DS Modulator
Clock
Select
REFIN C
2kW
5kW
CH D+
+5V
±5V
CH D-
27W
0.1mF
5kW
REFOUT
2kW
+3V
CLKSEL
AVDD
Out
Reference
Voltage
2.5V
+5V
EN
RC
Oscillator
20MHz
REFIN D
2kW
CLKIN
+5V
2nd-Order
DS Modulator
OPA4350
0.1nF
5kW
+3V
BVDD
BGND
27W
0.1mF
2nd-Order
DS Modulator
FPGA
or
ASIC
AVDD
AVDD
+5V
+5V
AVDD
AGND AGND AGND AGND
0.1mF
0.1mF
0.1mF
0.1mF
0.1mF
+5V
±5V
27W
0.1mF
OPA4350
+5V
0.1nF
5kW
2kW
OPA336
0.1mF
Figure 26. Single-Ended Connection Diagram for the ADS1204 ΔΣ Modulator
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
13
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
+5V
27W
R1
OPA4354
IN+
0.1nF
R2
+5V
27W
R1
OPA4354
INR2
AVDD
+5V
BVDD
27W
R1
CH A+
OPA4354
IN+
CH A-
0.1nF
2nd-Order
DS Modulator
R2
OUT A
Output
Interface
Circuit
REFIN A
OUT D
CLKOUT
+5V
CH B+
27W
R1
OUT B
OUT C
CH B-
OPA4354
2nd-Order
DS Modulator
FPGA
or
ASIC
+3V
BVDD
0.1mF
BGND
INREFIN B
R2
Divider
CH C+
+5V
CH C-
2nd-Order
DS Modulator
27W
R1
OPA4354
Clock
Select
REFIN C
IN+
0.1nF
R2
CH D+
CH D-
OPA4354
INREFOUT
R2
+5V
AVDD
Out
Reference
Voltage
2.5V
+5V
EN
RC
Oscillator
20MHz
REFIN D
27W
CLKSEL
+5V
2nd-Order
DS Modulator
+5V
R1
+3V
CLKIN
AVDD
AVDD
+5V
+5V
AVDD
AGND AGND AGND AGND
0.1mF
0.1mF
0.1mF
0.1mF
0.1mF
27W
R1
OPA4354
IN+
0.1nF
R2
+5V
27W
R1
+5V
OPA4354
INR2
OPA336
0.1mF
Figure 27. Differential Connection Diagram for the ADS1204 ΔΣ Modulator
14
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
THEORY OF OPERATION
The differential analog input of the ADS1204 is
implemented with a switched-capacitor circuit. This
circuit implements a second-order modulator stage,
which digitizes the analog input signal into a 1-bit
output stream. The clock source can be internal as
well as external. Different frequencies for this clock
allow for a variety of solutions and signal bandwidths.
Every analog input signal is continuously sampled by
the modulator and compared to a reference voltage
that is applied to the REFINx pin. A digital stream,
which accurately represents the analog input voltage
over time, appears at the output of the corresponding
converter.
ANALOG INPUT STAGE
Analog Input
The topology of the analog inputs of ADS1204 is
based on fully differential switched-capacitor
architecture. This input stage provides the
mechanism to achieve low system noise, high
common-mode rejection (100dB), and excellent
power-supply rejection.
which is also the sampling frequency of the
modulator. Figure 28 shows the basic input structure
of one channel of the ADS1204. The relationship
between the input impedance of the ADS1204 and
the modulator clock frequency is shown in
Equation 1:
100kW
ZIN =
fMOD/10MHz
(1)
The input impedance becomes a consideration in
designs where the source impedance of the input
signal is high. This high impedance may cause
degradation in gain, linearity, and THD. The
importance of this effect depends on the desired
system performance. There are two restrictions on
the analog input signals, CH x+ and CH x–. If the
input voltage exceeds the range (GND – 0.3V) to
(VDD + 0.3V), the input current must be limited to
10mA because the input protection diodes on the
front end of the converter will begin to turn on. In
addition, the linearity and the noise performance of
the device are ensured only when the differential
analog voltage resides within ±2V (with VREF as a
midpoint); however, the FSR input voltage is ±2.5V.
The input impedance of the analog input is
dependent on the modulator clock frequency (fCLK),
650W
AIN+
1.2pF
0.4pF
High
Impedance
> 1GW
VCM
Switching Frequency = CLK
0.4pF
650W
1.2pF
AIN-
High
Impedance
> 1GW
Figure 28. Input Impedance of the ADS1204
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
15
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
Modulator
The ADS1204 can be operated in two modes. When
CKLSEL = 1, the four modulators operate using the
internal clock, which is fixed at 20MHz. When
CKLSEL = 0, the modulators operate using an
external clock . In both modes, the clock is divided by
two internally and functions as the modulator clock.
The frequency of the external clock can vary from
1MHz to 32MHz to adjust for the clock requirements
of the application.
The modulator topology is fundamentally a
second-order, switched-capacitor, ΔΣ modulator,
such as the one conceptualized in Figure 29. The
analog input voltage and the output of the 1-bit
digital-to-analog converter (DAC) are differentiated,
providing analog voltages at X2 and X3. The voltages
at X2 and X3 are presented to their individual
integrators. The output of these integrators
progresses in a negative or positive direction. When
the value of the signal at X4 equals the comparator
reference voltage, the output of the comparator
switches from negative to positive, or positive to
negative, depending on its original state. When the
output value of the comparator switches from high to
low or vice versa, the 1-bit DAC responds on the next
clock pulse by changing its analog output voltage at
X6, causing the integrators to progress in the
opposite direction. The feedback of the modulator to
the front end of the integrators forces the value of the
integrator output to track the average of the input.
DIGITAL OUTPUT
A differential input signal of 0V will ideally produce a
stream of ones and zeros that are high 50% of the
time and low 50% of the time. A differential input of
+2V produces a stream of ones and zeros that are
high 80% of the time. A differential input of –2V
produces a stream of ones and zeros that are high
20% of the time. The input voltage versus the output
modulator signal is shown in Figure 30.
fCLK
X(t)
X2
X3
Integrator 1
Integrator 2
X4
DATA
fS
VREF
Comparator
X6
D/A Converter
Figure 29. Block Diagram of the Second-Order Modulator
Modulator Output
+FS (Analog Input)
-FS (Analog Input)
Analog Input
Figure 30. Analog Input vs Modulator Output of the ADS1204
16
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
DIGITAL INTERFACE
INTRODUCTION
The analog signal connected to the input of the ΔΣ
modulator is converted using the clock signal applied
to the modulator. The result of the conversion, or
modulation, is generated and sent to the OUTx pin
from the ΔΣ modulator. In most applications where a
direct connection is realized between the ΔΣ
modulator and an ASIC or FPGA (each with an
implemented filter), the two standard signals per
modulator (CLKOUT and OUTx) are provided from
the modulator. The output clock signal is equal for all
four modulators. If CLKSEL = 1, CLKIN must always
be set either high or low.
frequency of output data rate fDATA = fCLK/OSR. The
–3dB point is located at half the Nyquist frequency or
fDATA/4. For some applications, it may be necessary
to use another filter type for better frequency
response.
This performance can be improved, for example, by a
cascaded filter structure. The first decimation stage
can be a Sinc3 filter with a low OSR and the second
stage a high-order filter.
For more information, see application note SBAA094,
Combining the ADS1202 with an FPGA Digital Filter
for Current Measurement in Motor Control
Applications, available for download at www.ti.com.
0
MODES OF OPERATION
-20
Gain (dB)
The system clock of the ADS1204 is 20MHz by
default. The system clock can be provided either from
the internal 20MHz RC oscillator or from an external
clock source. For this purpose, the CLKIN pin is
provided; it is controlled by the mode setting,
CLKSEL.
The system clock is divided by two for the modulator
clock. Therefore, the default clock frequency of the
modulator is 10MHz. With a possible external clock
range of 1MHz to 32MHz, the modulator operates
between 500kHz and 16MHz.
The modulator generates only a bitstream, which
does not output a digital word like an A/D converter.
In order to output a digital word equivalent to the
analog input voltage, the bitstream must be
processed by a digital filter.
A very simple filter, built with minimal effort and
hardware, is the Sinc3 filter shown in Equation 2:
H(z) =
1 - z-OSR
2
1 - z-1
-30
-40
-50
-60
-70
-80
0
200
400
600
800
1000
1200
1400
1600
Frequency (kHz)
Figure 31. Frequency Response of Sinc3 Filter
30k
OSR = 32
FSR = 32768
ENOB = 9.9 Bits
Settling Time =
3 ´ 1/fDATA = 9.6ms
25k
Output Code
FILTER USAGE
OSR = 32
fDATA = 10MHz/32 = 312.5kHz
-3dB: 81.9kHz
-10
20k
15k
10k
(2)
This filter provides the best output performance at the
lowest hardware size (for example, a count of digital
gates). For oversampling ratios in the range of 16 to
256, this is a good choice. All the characterizations in
the data sheet are also done using a Sinc3 filter with
an oversampling ratio of OSR = 256 and an output
word width of 16 bits.
In a Sinc3 filter response (shown in Figure 31 and
Figure 32), the location of the first notch occurs at the
5k
0
0
5
10
15
20
25
30
35
40
Number of Output Clocks
Figure 32. Pulse Response of Sinc3 Filter
(fMOD = 10MHz)
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
17
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
The effective number of bits (ENOB) can be used to
compare the performance of A/D converters and ΔΣ
modulators. Figure 33 shows the ENOB of the
ADS1204 with different filter types. In this data sheet,
the ENOB is calculated from the SNR as shown in
Equation 3:
SNR = 1.76dB + 6.02dB ´ ENOB
(3)
protection, filter types other than Sinc3 might be a
better choice. A simple example is a Sinc2 filter.
Figure 34 compares the settling time of different filter
types. The Sincfast is a modified Sinc2 filter as
Equation 4 shows:
1 - z-OSR
H(z) =
-1
1-z
16
Sinc
(4)
10
12
Sinc
10
Sinc
9
2
Sincfast
7
8
6
Sinc
Sincfast
3
8
ENOB (Bits)
ENOB (Bits)
(1 + z-2 ´ OSR)
3
14
4
Sinc
2
6
5
Sinc
4
3
2
2
0
1
10
100
1000
OSR
1
0
0
Figure 33. Measured ENOB vs OSR
In motor control applications, a very fast response
time for overcurrent detection is required. There is a
constraint between 1µs and 5µs with 3 bits to 7 bits
resolution. The time for full settling is dependent on
the filter order. Therefore, the full settling of the Sinc3
filter needs three data clocks and the Sinc2 filter
needs two data clocks. The data clock is equal to the
modulator clock divided by the OSR. For overcurrent
18
2
2
4
6
Settling Time (ms)
8
10
Figure 34. Measured ENOB vs Settling Time
For more information, see application note SBAA094,
Combining the ADS1202 with an FPGA Digital Filter
for Current Measurement in Motor Control
Applications, available for download at www.ti.com.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
ADS1204
www.ti.com........................................................................................................................................... SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009
LAYOUT CONSIDERATIONS
POWER SUPPLIES
DECOUPLING
An applied external digital filter rejects high-frequency
noise. PSRR and CMRR improve at higher
frequencies because the digital filter suppresses
high-frequency noise.
Good decoupling practices must be used for the
ADS1204 and for all components in the design. All
decoupling capacitors, specifically the 0.1µF ceramic
capacitors, must be placed as close as possible to
the pin being decoupled. A 1µF and 10µF capacitor,
in parallel with the 0.1µF ceramic capacitor, can be
used to decouple AVDD to AGND as well as BVDD to
BGND. At least one 0.1µF ceramic capacitor must be
used to decouple every AVDD to AGND and BVDD to
BGND, as well as for the digital supply on each digital
component.
However, the suppression of the filter is not infinite,
so high-frequency noise still influences the
conversion result. Inputs to the ADS1204, such as
CH x+, CH x–, and CLKIN, should not be present
before the power supply is on. Violating this condition
could cause latch-up. If these signals are present
before the supply is on, series resistors should be
used to limit the input current to a maximum of 10mA.
Experimentation may be the best way to determine
the appropriate connection between the ADS1204
and different power supplies.
GROUNDING
Analog and digital sections of the design must be
carefully and cleanly partitioned. Each section should
have its own ground plane with no overlap between
them. Do not join the ground planes; instead, connect
the two with a moderate signal trace underneath the
converter. However, for different applications with
DSPs and switching power supplies, this process
might be different.
The digital supply sets the I/O voltage for the
interface and can be set within a range of 2.7V to
5.5V.
In cases where both the analog and digital I/O
supplies share the same supply source, an RC filter
of 10Ω and 0.1µF can be used to help reduce the
noise in the analog supply.
For multiple converters, connect the two ground
planes as close as possible to one central location for
all of the converters. In some cases, experimentation
may be required to find the best point to connect the
two planes together.
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
19
ADS1204
SBAS301C – OCTOBER 2003 – REVISED FEBRUARY 2009........................................................................................................................................... www.ti.com
Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision B (August 2007) to Revision C ................................................................................................ Page
•
•
•
•
•
•
•
•
•
Updated document format .....................................................................................................................................................
Extended operating temperature range from +85°C to +105°C throughout document .........................................................
Deleted operating free-air temperature range row from Absolute Maximum Ratings table ..................................................
Added free-air temperature range ratings to Recommended Operating Conditions table ....................................................
Changed Dissipation Ratings table........................................................................................................................................
Changed typical specification in Input capacitance row of Analog Input section of Electrical Characteristics table .............
Added additional specification for Total Harmonic Distortion in AC Accuracy section of Electrical Characteristics table ....
Deleted test condition of VOUT row in Voltage Reference Output section of Electrical Characteristics table ........................
Updated typical characteristic graphs to reflect extended temperature range ......................................................................
1
1
2
2
3
3
3
3
9
Changes from Revision A (June 2004) to Revision B .................................................................................................... Page
•
20
Added note to QFN package ................................................................................................................................................. 6
Submit Documentation Feedback
Copyright © 2003–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS1204
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
ADS1204IRHBR
ACTIVE
QFN
RHB
32
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 105
ADS
1204I
ADS1204IRHBRG4
ACTIVE
QFN
RHB
32
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 105
ADS
1204I
ADS1204IRHBT
ACTIVE
QFN
RHB
32
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 105
ADS
1204I
ADS1204IRHBTG4
ACTIVE
QFN
RHB
32
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 105
ADS
1204I
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Apr-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
ADS1204IRHBR
QFN
RHB
32
3000
330.0
12.4
5.3
5.3
1.5
8.0
12.0
Q2
ADS1204IRHBT
QFN
RHB
32
250
180.0
12.4
5.3
5.3
1.5
8.0
12.0
Q2
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Apr-2013
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
ADS1204IRHBR
QFN
RHB
32
3000
338.1
338.1
20.6
ADS1204IRHBT
QFN
RHB
32
250
210.0
185.0
35.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Texas Instruments:
ADS1204IRHBR ADS1204IRHBRG4 ADS1204IRHBT ADS1204IRHBTG4
Similar pages