C B A .453 11.5 D .591 15 .091 2.3 .508 12.9 REV MODIFICATION DATE DRN 01 DRAWING RELEASE ECN 06-229 ECN 06-233 CO2010372 CO2010405 CO2010642 05/10/06 11/10/06 03/09/08 23/09/08 01/05/09 NJB NJB SF TC SF 02 03 04 05 1 .078 2 .578 14.7 .571 14.5 .07 1.8 1 .482 12.2 F E FIG 1 FIG 3 .701 17.8 FIG 2 .618 15.7 2 .972 24.7 .832 21.1 .089 2.3 .102 2.6 2 NOTE 1) OTHER COLOURS AVAILABLE BY SPECIAL ORDER. EXAMPLE: BPF-A414-OR FOR ORANGE. 3 3 FIG 4 4 INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL TO RICHCO INTERNATIONAL Co. Ltd. AND MAY NOT BE DISCLOSED OR REPRODUCED IN WHOLE OR PART WITHOUT THEIR WRITTEN CONSENT. FIG 5 Nylon 6/6 25% Nylon 6/6 UL94 Nylon 6/6 UL94 Nylon 6/6 UL94 Nylon 6/6 UL94 Hole Glass Filled UL94 Figure V-0, RMS-19 V-0, RMS-19 V-2, RMS-01 V-2, RMS-01 Diameter ± V-0 RMS-112 Colour: Black Colour: Natural Colour: Natural Colour: Black .08 (.003) Colour: Black SPECIAL STANDARD SPECIAL 1 BPF-A414-GF BPF-A414 BPF-A414-19NT 4.7 [.185] SPECIAL SPECIAL STANDARD 2 BPF-F4410-19 BPF-F4410NT BPF-F4410 5.0 [.197] STANDARD 3 BPF-F2495 7.0 [.276] STANDARD 4 BPF-F3T31 5.0 [.197] SPECIAL STANDARD 5 BPF-F1G12-GF BPF-F1G12 7.0 [.276] GENERAL TOLERANCES 0.25 [0.010] UNLESS OTHERWISE STATED 1 DECIMAL PLACE 0.25 [.010] 2 DECIMAL PLACES 0.10 [.004] ANGULAR 1 Panel Thickness THIRD ANGLE 0.8 - 3.0 [.031 - .118] B C SEE NOTE SEE TABLE 1.5 - 7.5 [.059 - .295] DESCRIPTION: 2.0 - 10.0 [.079 - .394] DRG No: 2.0 - 15.0 [.079 - .591] DRN D PART No: Barbed Push Fastener 3.2 - 6.0 [.125 - .236] 4 SEE TABLE NPR No: SHEET SIZE A4 06-045 NJB A COLOUR: MATERIAL: DATE CHKD 02/05/06 E DATE NBR 11/10/06 SCALE SHEET No. NTS 1 OF 1 FORM No. 0145/03